Used Dmc104V Linear for sale (2,358)

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Wittmann W828 Z=2500 mm linear robot , payload 5kg Euromap 67 X= 1105 mm Kodpfxsy Nkf Ao Afpjlt Y= 1200 mm Z= 2500 mm Vacuum : 2 Number of axis: 3 Reach: 2500 mm Payload: 5 kg

Condition: used, Year of construction: 2026, Chain excavator WOODGRAIN GF-1500 max 12/15KM EXCAVATION DIMENSIONS 600 X 100 MM The WOODGRAIN GF-1500 chain excavator is a professional machine designed for excavating for cables, pipes, irrigation, digging trenches for water installations or irrigation systems. Thanks to its precision, speed, dimensions, it will easily perform excavations near fences or other objects, in hard-to-reach places even with very hard ground! Only one person is required for operation. Machine Specification CE Certificate, DTR: YES Engine Capacity: 420cc Fuel: Petrol Efficiency: 60m/h Digging Width: 100mm Digging Depth: 150,300,450,600mm Teeth: 27 carbide teeth Chain Length: 2000mm Chain Speed(Max): 550m/min Tire: 145/7.0-6 Height: 1100mm Length: 2100mm Width: 720mm Gross Weight: 188 kg Engine technology: 4-stroke, Single cylinder, air-cooled, OHV (overhead valve) Displacement (cm3): 420 Cylinder: Cast iron sleeve Cylinder diameter (mm): 90.0 Stroke (mm): 66.0 max 3600 rpm Fuel tank capacity (l): 6.6 Oil system capacity (l): 1.1 Dry engine weight (kg): 31.0 Dimensions: length (mm): 499 Dimensions: width (mm): 370 Dimensions: height (mm): 443 Max engine power (EPS*): 15 HP *EFFECTIVE POWER SOLUTIONS Engine Features: OHV Technology - optimal performance guaranteeing longer engine life and greater fuel savings. Lo-Tone PRO Muffler - Lowest audible sound level (significantly lower DB) TWO air filters - no airborne contaminants into the engine (protection) Speed ​​control - regulates speed to provide more usable power in difficult conditions. Ksdpfx Afoy S U Hpepolt Cast iron sleeve - reinforcement and durability, providing resistance to wear and overuse while improving oil control. Double ball bearings - provides additional durability and extends engine life. Float carburetor - the right amount of fuel, which improves engine start-up along with fuel economy High torque - more power, higher efficiency! Protective cover against ejection of excavation spoil PLEASE NOTE!!! This machine is a returned item and has been refurbished. NO WARRANTY!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 13,028 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, total height: 2,450 mm, table width: 2,400 mm, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, product length (max.): 3,000 mm, number of axes: 3, This 3-axis DMG DECKEL MAHO 64V Linear was manufactured in 2002. It features an X-axis travel of 640 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a table clamping surface of 850 × 600 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 64V Linear vertical machining centre we have for sale. Contact us for further details. • Rapid Traverse (X / Y / Z): 30 m/min • Max. Feed Rate: 20000 mm/min • Table Clamping Surface: 850 × 600 mm • Max. Table Load: 600 kg • Automatic Tool Changer (ATC) Magazine Capacity: 30 stations Klsdoy S Azhspfx Afpot • Max. Tool Diameter: 80 mm (140 mm with adjacent pockets empty) • Max. Tool Length: 300 mm • Max. Tool Weight: 7 kg • Spindle Speed Range: 20 – 8000 rpm • Tool Taper: SK 40 / ISO 40 • Spindle Power (100% / 40% ED): 13 kW / 19 kW • Max. Spindle Torque: 140 Nm Technical Specification Taper Size SK 40

Condition: used, operating hours: 18,001 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, nominal power (apparent): 82 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece length (max.): 900 mm, workpiece width (max.): 900 mm, total height: 3,267 mm, total length: 4,523 mm, total width: 8,436 mm, rotational speed (min.): 12,000 rpm, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 80, Year of construction: 2004 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 2500 Y-axis travel mm: 920 Z-axis travel mm: 820 Worktable Number of pallets: 1 Table dimensions mm: 3100 Maximum workpiece size (D x H) mm: 900 Spindle Spindle speed rpm: 12000 Spindle drive power kW: 35/25 (40/100%ED) Cooling Tank capacity: 600 Tool system Tool holder: HSK-A 100 Tool magazine slots: 80 Tool changer: Pick-up With free neighboring places mm: 160 With occupied neighboring places mm: 100 Max. Tool Length mm: 250 Max tool weight kg: 12 Equipment Chip conveyor Rotating inspection windows Signal lamp Workarea light Kodoylw D Aspfx Afpelt Air or water through spindle center RENISHAW Measuring probe Machine running times Under power: 61685 Spindle Working: 18001 Rated power kVA: 82 Basic machine dimensions / weight Length mm: 4523 Width mm: 8436 Height mm: 3267 Weight kg: 26000

Condition: used, DMG DMC 75 V linear is a 5-axis machining center engineered for precision, high accuracy and reliable operation. Working capacities: travels X 885 mm, Y 600 mm, Z 600 mm; table load max 600 kg; B axis +10/-110°; C axis 360°; table speed 100 t/min; tool magazine 60 places, tool Ø max 40 mm, length 300 mm; spindle interface HSK-A63. Key specs: spindle 0–28,000 rpm (stepless), spindle power 55/43.5 kW; rapid traverse 90 m/min; air 6 bar; power 3x400 V 50 Hz; machine weight ≈11,000 kg; dims L3255×W2450×H3150 mm. Accessories: high-pressure coolant 60 bar, chip conveyor, electronic handwheel. Achieves tight tolerances; typical in automotive, aerospace, medical, watchmaking and machine tool industries Klodpfjy S Dfnjx Afpet

Condition: good (used), functionality: fully functional, input voltage: 400 V, overall weight: 1,500 kg, total width: 1,400 mm, total length: 1,175 mm, input frequency: 50 Hz, electrical fuse: 16 A, type of input current: three-phase, Lifting Kneader Model: D 200 a Diosna removable kneader Dough machine with flour dust cover 2 bowl trolleys 2 speeds, with safety circuit Connection 400V, 16A CEE plug Used machine Kledpfx Ast Em E Ijfpst We have many lifting kneaders in stock!

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 06/2027, overall weight: 1,000 kg, total width: 1,310 mm, total length: 1,175 mm, input frequency: 50 Hz, input current: 10 A, electrical fuse: 16 A, Tilting head dough mixer, movable Kemper model: F 100 ASL Stainless steel bowl Dough mixer with flour dust cover 2 bowl trolleys Stainless steel kneading arm Robust engineering DGUV V3 tested – only available from us Connection: 400V, 16A CEE plug Refurbished used machine With warranty and spare parts service Options: Delivery service & floor mounting Ksdsv D Tpzopfx Afpjlt Maintenance contract Service package Instruction & commissioning Leasing & rental service We have a large selection of tilting head dough mixers in our showroom!

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 06/2027, overall weight: 400 kg, total width: 840 mm, total length: 940 mm, input frequency: 50 Hz, electrical fuse: 16 A, Lifter Kneader Diosna Removable Kneader Model: S 120 a for up to 120 kg dough Stainless steel bowl and kneading arm Dough mixer with flour dust cover 2 bowl trolleys Robust technology Connection: 400V, 16A-CEE plug Refurbished used machine with warranty Options: Leasing & rental service Maintenance contract Delivery service E-Box Service package Training & commissioning Kodpoupvqnofx Afpslt Here you will find the TOP selection of lifter kneaders!

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: HEIDENHAIN, controller model: I TNC 530, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,000 h, spindle nose: BT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous mobile gantry vertical machining center, with rotary table (capable of both horizontal and vertical mounting) with a diameter of 550mm. Possibility of pendulum machining (pallet changer type) with dedicated partition. Equipped with BLUM laser control NT tool presetting. Wireless part probe HEIDENHAIN TS 642. Belt-type chip conveyor. High-pressure through-spindle cooling with paper filter. Spindle chiller. Remote HEIDENHAIN handwheel. Ksdpfx Aoy Diabsfpelt

Condition: excellent (used), Year of construction: 2006, Travelling-column vertical machining centre with linear motor X-axis Kodpfx Afey Skmrjpolt Control: Heidenhain iTNC 530 (3D path) Travels: X 2,500 mm / Y 920 mm / Z 820 mm Spindle: 20 – 18,000 rpm · HSK taper

Condition: used, Year of construction: 2004, operating hours: 1,53,199 h, machine/vehicle number: IntNr231566, For sale is a high-performance DMG Speed 12-7 Linear sliding headstock automatic lathe with FMB Minimag bar feeder. Control: Fanuc 16i-TB with DMG-specific operator interface Year of manufacture: 2004 Technical data Number of axes: 7 axes (X1, Y1, Z1, X2, Z2, C1, C2) Maximum bar diameter: 12.7 mm Maximum turning length: 120 mm Kledsy Sak Hspfx Afpot Rapid traverse rates: X-axis (linear): 40 m/min Linear drive cooling: Separate cooling unit for thermal stabilization of the linear motor. Z-axis: 30 m/min Main spindle speed range: 0 – 12,000 rpm Drive power: 3.7 / 5.5 kW C-axis: 0.001° resolution for high-precision milling operations Counter spindle speed range: 0 – 12,000 rpm Travel (Z2): 150 mm C-axis: full-featured integrated C-axis Tool carrier (linear slide system) Total tool positions: up to 18 stations Driven tools: 3 to 5 positions for cross machining Max. speed of driven tools: 6,000 rpm Bar feeder: FMB Minimag for bar diameters from 2 to 23 mm. Bar length: 3,020 mm Chip conveyor Compact extinguishing system / Kraft und Bauer automatic fire suppression systems Parts separator Chip flushing system The machine can be demonstrated under power by prior appointment. Technical data and details are subject to change and error. Prior sale reserved!

Condition: good (used), Year of construction: 2014, functionality: fully functional, overall weight: 2,200 kg, KUKA KRC4 linear axis 1500/3T Article number: 8143983 Serial number: 143983 Kodpfx Ajvzxg Tjfpelt The KUKA KRC4 linear axis is a high-precision and robust motion unit that is ideal for industrial applications. It ensures precise control of motion sequences and plays a central role in automation processes and robotic systems within production. Its stable construction ensures consistently reliable performance, even in the most demanding applications.

Condition: used, Year of construction: 2004, operating hours: 1,45,113 h, machine/vehicle number: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Klsdpfxjy Ehdbj Afpjt Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!

Condition: good (used), functionality: fully functional, machine/vehicle number: 142005, input voltage: 400 V, DGUV certified until: 06/2027, overall weight: 300 kg, total width: 700 mm, total length: 750 mm, input frequency: 50 Hz, input current: 10 A, electrical fuse: 16 A, Spiral Mixer – Dough Machine Erka Model: HK 30 for approx.: max. 30 kg dough 2 speeds Machine is mobile Connection: 400V, 16A-CEE plug Kljdpfxewmvx Ae Afpot Used machine We have more spiral mixers in stock!

Condition: good (used), functionality: limited functionality, year of last overhaul: 2023, input voltage: 400 V, DGUV certified until: 06/2027, overall weight: 750 kg, total width: 1,125 mm, total length: 1,140 mm, input frequency: 50 Hz, input current: 16 A, electrical fuse: 16 A, Dough Mixer Diosna Model: D 240 Plus Stainless steel bowl 2 speeds, 1 timer Lifting spiral mixer with flour dust cover Mobile machine Kljdpfexwyx Eex Afpst Connection: 400V, 16A CEE plug Dimensions: 1125 x 1140 x 1310/2050 mm (W x D x H) Used machine We have more lifting spiral mixers in stock!

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 06/2027, overall weight: 258 kg, total width: 520 mm, total length: 580 mm, input frequency: 50 Hz, input current: 16 A, electrical fuse: 10 A, Diosna Dough Mixer S 20 Stainless steel bowl for up to 20 kg dough Flour dust cover Mobile machine Connection: 400V, 16A-CEE plug Used machine with warranty Option: Delivery service Training & commissioning Ksdpfx Afsv D Tkrepslt Many more spiral mixers in stock!

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, CNC Sliding Headstock Automatic Lathe GILDEMEISTER SPRINT 20/8 linear Equipped with Fanuc 31i control Year of manufacture: 2016 Spindle bore: 20 mm MAIN SPINDLE Turning diameter: max. 20 mm Speed range: max. 10,000 rpm Z1 stroke: 80 mm SUB SPINDLE Turning diameter: max. 20 mm Z2 stroke: 300 mm Speed: max. 10,000 rpm SLIDE 1 X1 stroke: 50 mm Y1 stroke: 350 mm 6-position tool holder 12 x 12 mm 5 driven tools, including spindles with ESX 16 collet holders SLIDE 2 X2 stroke: 240 mm 4-position tool holder for external machining, 12 x 12 mm 4-position tool holder for internal machining, up to 20 mm diameter 5 driven tools, including spindles with ESX 16 collet holders 6 + 2 axes, 2 Y-axes as standard Linear drive for maximum precision Including the following accessories: Fully enclosed safety cabin with interior lighting Various tool holders C axis for main and sub spindle Bar feeder LNS Quick Load Servo 80 S2 Workpiece unloading conveyor Hinged belt chip conveyor 4-color signal tower Kedpfx Asy Rm Snsfpslt Fire extinguishing system Coolant system 250 liters (Pump capacity: 120 l/min, 1.5 bar) THE MACHINE IS IN EXCELLENT CONDITION!! THE MACHINE HAS ONLY 4,426 PROGRAM RUNNING HOURS!!

Condition: excellent (used), Year of construction: 2003, operating hours: 7,600 h, functionality: fully functional, turning length: 600 mm, turning diameter: 324 mm, Control: HEIDENHAIN CNC Pilot 4290 Max. spindle speed: 5,000 rpm C-axis Max. bar capacity: 65 mm Travel: X = 260 mm, Z = 630 mm Turret with 12 stations (all driven, max. 4,500 rpm) Kjdpfx Afey Ry Txepolt Tailstock Tailstock travel: 580 mm Chip conveyor Dimensions (LxWxH): 3,500 x 2,440 x 2,100 mm (without chip conveyor) Weight: 6,000 kg Power-on hours: 32,600 h Spindle hours: 7,600 h

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN control MillPlus iT table surface area ø 500 x 380 mm B-axis 0 - 161,955 ° C-axis 360 ° spindle taper SK 40 spindle turning speed range 20 - 18.000 U/min spindle power max. 35 kW max. torque on the spindle max. 130 Nm feeds -stepless- bis 20.000 mm/min rapid traverse X/Y/Z axis 80 / 50 / 50 m/min rapid traverse B-axis 40 U/min Klodjwlvi Eopfx Afpjt C-axis rapid feed 50 U/min no. of tools in magazin 30 tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 40 bar total power requirement 52 kVA weight of the machine ca. 6 t = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device

Condition: excellent (used), Year of construction: 2008, operating hours: 51,226 h, functionality: fully functional, rotational speed (max.): 5,000 rpm, Control: HEIDENHAIN Plus iT with Turn Plus Kedpfx Afjy Niziopolt Turning length: 1175 mm (with tailstock 1100 mm) Tool holder: HSK 63A (DIN 69893) Tool magazine: 1 x 36-position disc magazine

Condition: new, ZEATZ PHL Linear Rotary Tables – Rotary and Slide Tables – Available on Short Notice The ZEATZ PHL Linear series combines high-precision rotary table technology with an integrated linear axis, delivering maximum flexibility for complex machining applications. Ideal for positioning, simultaneous rotary operations, and interpolation machining of large and heavy workpieces. Your advantages at a glance: ✔ Combination of rotary table and linear axis in a single unit ✔ Integration into existing machines (CNC controls: HEIDENHAIN / SIEMENS / FANUC) ✔ Service & technical support directly via JMT ✔ Custom designs and application-specific solutions Why ZEATZ: ZEATZ stands for high-precision NC rotary tables and innovative solutions for demanding machining tasks. With a robust design, backlash-free drive systems, and state-of-the-art control technology, these systems are ideal for heavy-duty machining and applications requiring the highest accuracy. Technical features: Applications: Positioning | Simultaneous Turning | Interpolated Machining Table sizes: 1,000 x 1,000 mm 1,200 x 1,200 mm 1,500 x 1,500 mm 1,800 x 1,800 mm 2,000 x 2,000 mm 2,500 x 2,500 mm 3,000 x 3,000 mm 3,500 x 3,500 mm 4,000 x 4,000 mm (Round clamping surfaces also available) Max. workpiece weight: Approx. 6,000 to 80,000 kg Linear axis: Optional integrated sliding axis Kedpfx Afsm Tv Azspelt Travel: approx. 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ± 5 arc seconds Integration: Compatible with HEIDENHAIN, SIEMENS, and FANUC controllers Your benefits as a JMT customer: ✔ Official sales partner for ZEATZ in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Assistance with integration and commissioning ✔ Reference projects available in Germany Contact us – we are happy to advise and provide you with a customized offer.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 02280000301, turning diameter over cross slide: 565 mm, turning length: 1,300 mm, turning diameter: 440 mm, spindle bore: 90 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 315 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 45,000 W, rapid traverse X-axis: 60 m/min, rapid traverse Z-axis: 45 m/min, rotational speed (min.): 20 rpm, rotational speed (max.): 4,000 rpm, total height: 2,230 mm, total length: 5,742 mm, total width: 2,730 mm, feed length X-axis: 315 mm, feed length Z-axis: 1,350 mm, quill travel distance: 150 mm, quill stroke: 150 mm, swing diameter over cross slide: 565 mm, turning diameter over bed slide: 840 mm, overall weight: 10,700 kg, swing diameter over bed slide: 680 mm, swing diameter over top slide: 680 mm, Equipment: documentation/manual, rotational speed infinitely variable, NO DEALER INQUIRIES – Dealer inquiries will not be answered. For sale is a DMG GILDEMEISTER CTX 520 linear – a robust, proven CNC lathe currently in production. Ksdpfx Afsypkv Hspelt Inspection and demonstration under power are possible at any time by appointment. The machine is sold as seen. Additional photos and videos of the machine can be sent to you by email upon request.

Condition: excellent (used), Year of construction: 2008, Vertical machining center Deckel Maho DMF 220 Linear Year of manufacture: 2008 Control: Siemens 840 D Technical specifications: CNC control: Siemens Sinumerik 840D Number of axes: 3 X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Max. clamping height: 600 mm Table size (LxW): 2,600 x 600 mm Max. table load: 2,200 kg Guideway type: Linear guide Max. power: 35 kW Tool holder: SK40 Tool magazine capacity: 60 Tool change time: 9.6 s Klodpfoy Nbbzex Afpjt The machine was in active serial production until recently and was predominantly used for machining steel and aluminum. Equipment: ⦁ Partition wall for setup time optimization (parallel machining / setup in one cabin half) ⦁ Conveyor belt filter system for coolant processing ⦁ Automatic tool changer ⦁ Generous working area for complex components

Condition: ready for operation (used), Year of construction: 2010, operating hours: 17,250 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, In 2015, a new spindle was installed! TECHNICAL DETAILS Travel range X-axis: 710 mm Travel range Y-axis: 520 mm Travel range Z-axis: 520 mm Maximum spindle speed: 18,000 RPM Number of tool magazine slots: 30 Tool holder: SK40 Distance between T-slots: 63 mm Rotational speed of the 4th axis max.: 40 RPM Rotational speed of the 5th axis max.: 40 RPM 4th axis swivel range: 360 x 0.001 degrees 5th axis swivel range: 0 ± 102 x 0.001 degrees MACHINE DETAILS Control system model: Heidenhain - Mill Plus Operating hours: currently 36,500 hours Spindle hours: currently 17,250 hours EQUIPMENT Programmable coolant nozzles Coolant gun Chip conveyor 40 bar internal coolant system with 600 l paper filter system Measuring probe 3D Quickset Laser tool measurement Visiport Kljdpfx Afsy Thlnopot Handwheel Signal light Operating mode 4

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Klsdpoy Nyrxofx Afpjt Feel free to view our other advertisements for a complete overview of our stock.