Used Cnc Turn Mill Center for sale (27,228)

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: NTX26200912, turning length: 1,530 mm, turning diameter: 670 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 675 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 40 mm, rotational speed (max.): 4,000 rpm, number of slots in tool magazine: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with the shortest length of 350 mm Machining option: 6-sided complete machining thanks to powerful counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Rjdsyap Shjpfx Aazon Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with protective cover for main and counter spindle Travel control: Automatic travel control of the clamping cylinder for the main spindle and counter spindle Turning-milling spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool holder: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for tool holders attached with screws Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC) Tool magazine Capacity: 76 tools Tool holder: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Distance measuring system: Direct distance measuring system in the X, Y and Z axes of the turning-milling spindle Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feed device (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Cooling media and chip disposal Chip conveyor: Ejection on the right, hinged belt + Drum filter Coolant: Use of water-soluble cooling lubricants (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through the spindle for the tool spindle and lower turret Filter system: Knoll/Interlit Compressed air system Blow-off system: For chucks on the main and counter spindle Oil mist system Oil mist separator: Extraction opening Ø 200 mm, AFS 1600 Filter and cooling system Filter system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, MORI SEIKI Horizontal CNC Lathe NLX2500Y / 700 (Year 2015) Rjdpfox Ty Tdex Aazsn Mitsubishi M730BM (MAPPS) Chuck Size 10" Max. Swing dia. 920mm Turning Diameter dia. 366mm Center Distance 700mm Bar Capacity dia.80 C axis 0.001 degree X Axis Travel 260mm Z Axis Travel 795mm Y axis Travel +/-50mm Turret 12 ( 12 rotating Tools) Power Tools 10,000rom Spindle 4,000rpm Tail Stock - programmable Chip Conveyor

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, DMG MORI Horizontal Turning Machine CTX -310V3 ecoline - Year 2010 Controller : MAPPS (Mitsubishi) Rjdpfx Aajx Ty S Tszjn Max swing dia.330mm Max swing over slide dia. 260mm Max. Turn dia. 200mm Length 450mm Chuck 8" Turret 12 (6 driven tools) C axis indexing Power driven Tools 4,500rpm Tool setter tail Stock Chip conveyor --- Video upon request

Condition: excellent (used), Year of construction: 2015, operating hours: 2,964 h, functionality: fully functional, For sale is a CNC lathe from the manufacturer DMG Mori, model NEF 400. The machine can be inspected on site. Rsdpfx Aajyghuhozsn

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, TX8i control, spindle bore 65 mm, two turrets, turret 1 with Y-axis, turret 2 with steady rest, sub-spindle, chip conveyor, short bar loader. Rsdpfx Aajyghmqszon

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 17004A, bar diameter (max.): 20 mm, TECHNICAL DETAILS - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Spindle power: 2.2 / 3.7 kW - Spindle speeds: 200 - 10,000 rpm Rjdpfeyghcrsx Aazsn - Max. bar diameter: 20 mm - C axis indexing accuracy: 0.001° COUNTER-SPINDLE - Spindle power: 1.5 / 2.2 kW - Spindle speeds: 200 - 12,000 rpm - C axis indexing accuracy: 0.001° * X/Z travel: 488 / 335 mm TURNING-MILLING SPINDLE - X/Z travel: 289 / 305 mm - Y travel: 75 mm (-15/+60) - B axis travel: 180° - B axis indexing accuracy: 0.001° - Tool type: 15T - Spindle speeds: 300 - 30,000 rpm - Spindle power: 3.7 / 5.5 kW TOOL CHANGER - Automatic tool changer type: Umbrella - Tool magazine capacity: 24 SECONDARY OPERATION - Number of positions: 4 - Number of positions: 3 WEIGHT & DIMENSIONS - Machine weight: 2,700 kg Previously used in the medical sector – primarily for dental implant manufacturing. Excellent condition! Includes: - Automatic Tool Presetter (ATP) - Barfeeder - Chip conveyor - Set of tool holders Machine inspection and test run available on site. Price negotiable.

Condition: good (used), Year of construction: 2000, Turning diameter 200 mm Turning length 400 mm Control: SIEMENS SINUMERIC Rodpfx Aeydm Tdeazjn Number of spindles: 2 Tool changer: 2x 14 Total power requirement: 39 kW Machine weight approx. 4,800 kg Without bar feeder, machine is integrated in automatic operation Machine is still powered. Videos of the machine's functionality are available and can be provided upon request.

Condition: used, Technical details: operating hours: 2151 h Rsdpfxeydvfcj Aazjn milling spindle operating time: 2 h turning spindle switch on : 709 h swing diameter: 1000 mm turning diameter: 900 mm workpiece height max.: 800 mm control: Mazatrol Smoothg x-axis: 470 mm z-axis: 876 mm c-axis: 20 m/min tool holder / places: 12 revolution per minute: Revolver 4000 U/min workpiece weight: 3000 kg rapid power traverse in X-and Z direction: 24 m/min weight of the machine ca.: 14 t dimension machine xH: 3989 x 2375 x 3400 mm

Condition: used, Year of construction: 2019, Control: MITSUBISHI M730UM with CELOS Main spindle with integrated motor spindle ISM 80: 15/18.5 kW Speed range: 10–4000 rpm 10" hollow chuck 254mm KITAGAWA BB210A821 Counter spindle with integrated motor spindle ISM 65 Speed range: 10–5000 rpm 10" hollow chuck 254mm KITAGAWA BB208A621 20-position BMT star turret KNOLL high-pressure coolant system 70 bar Redpfoyf H E Nox Aazsn Y-axis with 100mm travel Gantry loading system LG-10AI

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Rjdpfx Asyf H Eioazon Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: like new (used), Year of construction: 2019, operating hours: 13,000 h, functionality: fully functional, Machine: Mazak Quick Turn 200 MSY with bar feeder / loading magazine Year of manufacture: 2019 The machine has already been packed for shipment to Taiwan according to the highest standards for international sea freight. A demonstration by a Mazak electromechanical technician is possible at any time; in that case, we would simply need to unpack the machine on site again. The machine is currently located at a factory of a now-closed facility in Baden Württemberg. Inspection appointments: Calendar week 10. Control: Mazatrol SmoothG Max. turning diameter: 695 mm Max. swing diameter: 575 mm Distance between the chucks (both spindles): 575 mm Travel distances X-axis: 234 mm Y-axis: 100 mm Z-axis: 575 mm W-axis: 585 mm Rapid traverse X/Y/Z/W: 30/21/33/30 m/min Main spindle Drive power: 26 kW Max. spindle speed: 5,000 rpm Spindle nose: A2-6 Spindle bore: 76 mm Max. bar capacity: 65 mm Sub spindle Drive power: 11 kW Max. spindle speed: 6,000 rpm Turret Rjdpfxoygbcfe Aazon 12 tool stations (VDI type) 12 driven stations Milling drive power: 5.5 kW Max. speed: 5,000 rpm Additional options / equipment Tooleye Parts catcher Interface for bar feeder C-axis on main and sub spindle Coolant supply through sub spindle Air at the turret Engraving function Cylindrical interpolation Clamping force control Thread re-cutting function Preparation for oil mist extraction Mahle coolant filter Chip conveyor (Mayfran) High-pressure pump 15 bar

Condition: used, Year of construction: 2018, control CELOS / F31iB5 / Mapps 4S max. turning diameter 670 mm turning length 1.538 mm bar passage max. 81 mm x1 axis 675 mm y-axis mm z1 axis 1.562 + 164 mm b-axis ° a-axis 1.542 mm x2-axis 200 mm y2-axis + / - 40 mm z2-axis 1.542 mm max. turning speeds 4.000 U/min power capacity 26 / 22 kW spindle passage Ø 91 mm max. turning speeds 5.000 U/min power capacity 22 / 18,5 kW spindle passage Ø 73 mm turning speed range 0 – 12.000 U/min power capacity 28/ 23 kW tool taper Capto C6 number of tool places 76 Pos. max. tool diameter Ø 70/ Ø 130 mm max. tool length 400 mm max. tool weight 8 kg Number of tool holders 10 pos. Shank length for square tool 20 mm Shank diameter for boring bars Ø 32 mm power capacity 5,5/ 5,5/ 3,7 kW torque 16,9/ 13,1/ 8 Nm x-axis 50 m/min y-axis 40 m/min z-axis 50 m/min A-axis 36 m/min x2-axis 25 m/min y2-axis 18 m/min z2-axis 40 m/min b-axis 100 U/min Hollow clamping device Ø 67 mm Number of working hours ca. 23.250 h spindle hours ca. 8. h Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden. Technische Merkmale & Zubehör: - Kitagawa- Hohlspannfutter an Haupt- und Gegenspindel - Fußschalter (doppelt) für Spindel 1 und Spindel 2 - Vollindexierung der Werkzeugspindel - Revolver- Reitstockfunktion - Geeignete Kühlmittelart: Wasserlösliches Kühlmittel Rodpfx Aoyfh R Hoazjn - Späneförderer - Kühlmittelsystem 70 bar, Fabr. Hydrajet - Blasluft an der Spindel 1 und Spindel 2 - Automatischer Messarm an der Hauptspindel - Werkstückauswurf an der Spindel - Teileentlader - Vorbereitung für Stangenlader - Schnittstelle für Nebelabscheider - 2 Stk. RotorClear - Signalleuchte 4 Farben - Multi-Dry-Filter - Automatisches Antasten und Werkzeugkorrektur - Speichererweiterung - Zyklus für Ebenentransformation - Kühlmittelspritzpistole Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist. Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Condition: used, Make: WMZ / PITTLER, Model: PVSL N1 2/2, Year of manufacture: 2009, Machine no.: ZN022, Control: Siemens Sinumerik 840D sl Powerline including handwheel, 2 spindles, 2 workspaces, 2 cross slides, max. turning diameter: 140 mm, max. workpiece height: 80 mm, max. spindle speed: 6,300 rpm, 2x 8-position turrets, driven tool stations, chip conveyor by Knoll, extraction unit by ILT, recooling unit by Hydac, workpiece automation with raw part and finished part storage +++ Note: Machine is part of an online open sale! +++ Rsdpex Ahfwofx Aazen

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 127728, Okuma MULTUS B300 5-Axis CNC Turning and Milling Center (2006) Okuma OSP-P200L controls Renishaw Probe Chip Auger Under maintenance / parts missing Redjx Ap A Depfx Aazen Sublocation - Building 3

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro Redpfex Rkvqsx Aazon 2 Spindles 1500mm No CE 2005/05 in very good condition Turret lathe.....10 tool ATC.....40 tool Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Maximum Swing over Cross Slide 33.5″ 850.9 mm Maximum Swing over Lower Turret 16.5″ 419.1 mm Located in Israel under power and ready for inspect . This CNC made in Japan and definitely needs a permit of MATI

Condition: reconditioned (used), Year of construction: 2010, operating hours: 31,600 h, functionality: fully functional, machine/vehicle number: 3078, Axis Travel: Z = 400 mm Y = 200 mm X = 410 mm Power / Thrust Force Z-Y: 2.5 kW / 550 daN (option with linear motor = 7.2 kW / 350 daN) X: 4.8 kW / > 550 daN Traverse Speed X-Y-Z: 40 m/min (option with linear motor = 50 m/min) Acceleration X-Y-Z-W: 8 m/s² / 0.8 g (option with linear motor = 10.4 m/s² / 1.1 g) Resolution X-Y-Z-W: 0.0001 mm MAIN SPINDLE + C1 Power: 7.5 kW Torque / peak: 22 / 28 Nm Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Bar capacity: Ø 32 mm Rotational speed (turning): 72,000°/min Clamping force (turning): 4,900 N at 6 bar B AXIS (TILTING TOOL SPINDLE AXIS) Power: 4.3 kW Torque / peak: 119 / 226 Nm Angular range: -25° / +115° Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Rotational speed: 36,000°/min Support torque: 200 Nm TOOL SPINDLE Power: 5 kW Torque: 6 to 800 min⁻¹ Max speed: 30,000 min⁻¹ Clamping force drawbar: 2,000 N Locking torque: mechanical by straight-tooth coupling Tool shank interface: HSK 40 (A or E) Tool clamping force: 1,000 daN TOOL CHANGER Number of positions: 30 (for HSK 40) CNC control: Fanuc 30i/31i type Y Axis (cross axis) Travel: 200 mm Power: 4.8 kW Feed force: 240 daN Resolution: 0.0001 mm Rapid traverse (G0): 50 m/min Feed rate (G1): 20 m/min Measuring system: glass scale Z Axis (longitudinal axis) Travel: 400 mm Power: 7.2 kW Feed force: 360 daN Resolution: 0.0001 mm Rapid traverse (G0): 50 m/min Feed rate (G1): 20 m/min Measuring system: glass scale Includes 8 kW cooling unit and integration of an emergency stop system. Inventory no. 2220114, machine includes: CONTROL Fanuc 30i/31i, with 14” screen LINEAR MOTOR FEED OPTION for Y and Z axes TURNING-MILLING FUNCTION With integrated indexing system (8 positions) on the tool spindle, tool changer adapted for HSK40-A, spindle speed increase to 5,500 min⁻¹ Rjdpfx Aaoyf Angozen WORKPIECE RE-CLAMPING UNIT "PRM" WITH 4 POSITIONS FOR 6-SIDED MACHINING: When not in use, the unit is protected under the main spindle C1. The re-clamping unit moves on the W axis, which is parallel to axis C. Max W axis speed: 40 m/min. Travel on W axis: 310 mm. Equiped with: 2 vices – force at 5 bar: 3,500 N; 1 tailstock. SPINDLE BORE CAPACITY UPGRADE Increase from 1 to 50 mm (main spindle) TOOL MEASURING DEVICE "RENISHAW" T27 Tool length measuring for turning tools. Routine detection via M-code. Automatic tool breakage control. TOOL MAGAZINE EXTENSION Capacity increased from 30 to 60 positions COOLANT THROUGH SPINDLE 100 bar, 25 L/min, 400 L tank HP PREPARATION & ADAPTATION FOR MILLING SPINDLE Mechanical and electrical integration of turning clutch. WORKPIECE UNLOADING CONVEYOR Left side machine discharge, adjustable speeds PAPER BAND FILTRATION SYSTEM CLAMPING SYSTEM FOR F-48 COLLETS ADAPTATION FOR W-20 COLLETS PREPARATION FOR BAR FEEDER INTEGRATION Technical data provided without engagement, errors and omissions excepted.

Condition: excellent (used), Year of construction: 1997, CNC Lathe Spinner TC67H-MC Year of manufacture: 2002 . Tailstock . Chip conveyor . High-pressure pump . Chuck . Driven tools Technical specifications: Rodpfx Aaoydlugozen Control: Siemens 840 D X-axis travel: 221 mm Z-axis travel: 590 mm Turning diameter: 300 mm Turning length: 600 mm Spindle speed: 4500 rpm

Condition: not inspected (used), CNC lathe MONFORTS Type RNC 4 Ser. No. 133/72 CNC control, SIEMENS, SINUMERIK Chip conveyor and oil mist extraction Rsdpfx Aaeyfnc Aozon

Condition: used, Year of construction: 1995, Machine in parts for sale spare parts ..... CNC lathe, make GILDEMEISTER Type: CTX 600, year 1995 Forkardt chuck 315 mm, tool turret Tailstock, steady rest Headstock Guide covers and sheets Motors Machine in individual parts for sale ..... Please ask what you need and we will send you an offer. Rsdpfx Aaenximuezen

Condition: used, Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (min.): 3,300 rpm, spindle bore: 104 mm, travel distance X-axis: 870 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,598 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, Equipment: rotational speed infinitely variable, MAZAK CNC Turning Machine MODEL: INTEGREX e-500 HS /U1500 with Mazatrol 640M PRO Control for sale. The machine is in good condition and can be inspected under power on site. The machine maintenance can be documented. In 2025, the X and Y axes were replaced. The milling spindle and gearbox were replaced in 2024. Technical Data - Max. swing diameter: 820 mm Redpex Syldofx Aazsn - Max. turning diameter: 820 mm - Max. turning length: 1524 mm Main spindle: - Speed range: 0-3300 rpm - Drive power: 30 kW / 22 kW - Max. torque: 588 Nm - Spindle nose: A2-11" - Spindle bore: 104 mm - Indexing: 0.0001 Sub spindle: - Speed: 0-3300 rpm - Drive power: 30 kW / 22 kW - Max. torque: 588 Nm - Spindle nose: A2-11" - Indexing: 0.0001 Milling spindle: - Drive power: 37 kW - Max. torque: 260 Nm - Speed range: 0-10,000 rpm - Tool holder: SK50 Tool magazine: - Number of tool pockets: 120 Travel: - X: 870 mm - Z: 1598 mm - Z2: 2458 mm - Y: 500 mm - B axis: -30 to 210°, 0.0001° Feed rate: - X/Y/Z: 40 mm/min Machine data: - Connected load: 104 kVA - Operating voltage: 400V / 50 Hz - Required footprint (L x W): 7 x 3.5 m Special accessories: - 120-position tool magazine - High-pressure coolant 70 bar - Renishaw - Laser measurement system for rotating tools - Interface set - Air/water through-spindle cooling - Overload monitoring system - Mayfran Consep 2000 chip conveyor - SMW quick-change chuck

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Tool cabinet and cutting tools not come. Only tool holders will come. Rsdpfxox Atyae Aazjn

Condition: good (used), Year of construction: 2008, functionality: fully functional, There is 5 pieces for sale, (2010 - 2008 - 2004 - 2002 - 2001) All of them has C-Axis. All of them has Automatic Part Loader. All of them has Live tools of different amounts. (Please ask for exact amount) We can send videos of the machines. X-Axis Travel : 245mm Rodsx Rw Itjpfx Aazsn Y-Axis Travel : +-35mm Z-Axis Travel : 240mm Spindle Speed Range: 60-6000 1/MIN Max. Bar Diameter on Main Spindle 70mm Max. Bar Diameter on Sub Spindle 80mm Spindle inner diameter 46mm

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Rsdpfjydi Svjx Aazsn Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, spindle speed (min.): 25 rpm, spindle speed (max.): 500 rpm, spindle bore: 79 mm, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, chuck outer diameter: 200 mm, spindle nose: 170 h5, Equipment: documentation/manual, rotational speed infinitely variable, Machine is from first owner (government institution) and is very well equipped. This CTX 400 is set up at our premises and can be inspected in operation if required. This machine comes standard with: - Chip conveyor - IFM oil mist extraction system - TurnPlus control Rodsydpdxopfx Aazsn - Collet chuck for 185E and 3-jaw chuck KH 200/68 with top jaws - Conversion kit for collet 173E - Overload clutch for X and Z axes - Double foot pedal (chuck + tailstock) - Original Gildemeister and Heidenhain documentation - Approx. 20 VDI-30 tool holders, of which 2 are driven

Condition: excellent (used), Year of construction: 2015, operating hours: 1,300 h, functionality: fully functional, machine/vehicle number: NRX20151106, Machinetype: Chucking Automatic Lathe - Multi Spindle Make: DMG MORI Type: NRX 2000 MC New in: 2015 Control: CNC Location: North Rhine-Westphalia Origin: Japan Term of delivery: to be agreed Quotation: ex site Description: CNC - Double Spindle Turning and Milling Center DMG MORI - NRX 2000 MC Double Front Spindle Simultaneous Parallel Machining Tool Drive Portal Loading Redpfx Aaownyi Iezsn Tool-Piece Carriage 14 pos. (Ø 40 - max. 150mm) approx. 1,500h Spindle-hours. Technical details/ additionals / accessories Text Dimension Unit number of spindles 2 swing diameter max. 348 mm turning diameter max. 150 mm standard turning dia. 120 mm turning length max. 80 mm distance between spindles 670 mm control COMPACTline M73 Workspindle: number of spindles 2 max. spindle speed max. 5,000 min/-1 power capacity 7.5 / 5.5 kW spindle nose JIS A2-5 spindle bearing diameter - mm spindle bore - mm max. bar capacity - mm usable bar diameter - mm chucking diameter 200 mm C-Axis 0.001 ° turret: Number of Turret 2 number of tool positions 10 pos. Shank height for square tool 20 mm Drill shank diameter 32 mm turret change time 0.31 sec. Driven Tool Stations: driven station 10 pos. Spindle speed - driven tool stations max. 10,000 min -1 power capacity - driven tool-stations 1.5 / 1.2 kW movement areas: x-axis 1+2: 100 mm z-axis 1+2: 220 mm C - Axis 1+2: 360° feeds: rapid traverse ( X / Y / Z ) 30 m/min feed speeds max. 30,000 mm/min Tip feed 0 - 5,000 mm/min total power requirement 32 kVA weight of the machine approx. 5.6 t dimensions of the machine approx. 5.0 x 3.0 x 2.2 m Chip conveyor Coolant system electric hand wheel gantry loader Workpiece-storage Tool drive mechanism