Used Doors for sale (10,462)

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: MITSUBISHI, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Y-axis: 250 mm Travel range, Z-axis: 250 mm Spindle speed range: 60–15,000 rpm Spindle speed control: stepless Tool changer: vertical Magazine capacity: 12 Tool interface: SK 30 Godsz Hxb Uopfx Ag Sjuh Workpiece clamping area: 400 × 250 mm MACHINE DETAILS Control system: MITSUBISHI Jaw width: 100 mm EQUIPMENT Fixed angular table Dual-pallet changer 4 × Allmatic vices Various tool holders SK 30 Electronic handwheel Full-protection enclosure with sliding doors and interior lighting Coolant system with paper band filter Coolant system Two-color signal light Chip conveyor 6 × Machine feet Operating manuals

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,462 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 20,000 rpm, The machine spindle was replaced in 2022. Since then, the machine has accumulated approximately 6,500 operating hours. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 650 mm Travel range Z-axis: 500 mm Gjdpsz Hwvdefx Ag Seuh Spindle speed range: 0–20,000 rpm Spindle speed control: stepless Tool interface: HSK 63 Magazine capacity: 30 Clamping area: 900 × 600 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 3,200 x 2,400 x 3,000 mm Weight: 10 t Operating Hours Machine operating hours: 54,796 h Spindle hours: 23,462 h EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning diameter: 1,270 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 5 rpm, spindle motor power: 30,000 W, rotational speed (min.): 5 rpm, rotational speed (max.): 6,000 rpm, total height: 5,000 mm, total length: 8,000 mm, workpiece weight (max.): 6,000 kg, torque: 190 Nm, overall weight: 22,000 kg, spindle nose: HSK100, Equipment: documentation/manual, rotational speed infinitely variable, The spindle was completely overhauled in 2025! The invoice for the spindle overhaul is attached. TECHNICAL DETAILS General Information Manufacturer: Konrad Seidler Model: MINIMAX 1800 Year of Manufacture: 2013 Machine Type: CNC rotary table turning, boring, and milling center Operating Mode: Single-shift operation Machine Weight: approx. 22,000 kg Control and Drive Control System: Siemens 840D SL Drives: SINAMICS 120 Turning Range and Rotary Table Turning Diameter: 500–1,270 mm Rotary Table Load Capacity: 6,000 kg Rotary Table Speed: 5–500 rpm Boring and Milling Spindle Boring/Milling Spindle Power: 30 kW Torque: 190 Nm Boring/Milling Spindle Speed: 2–2,500 rpm Boring/Milling Spindle Speed: max. 6,000 rpm Tool Holder: HSK100 Gujdpfxoz Hmhij Ag Ssh Tool Changer Tool Changer: 16 tools Coolant System Coolant Pressure: 6 bar High-Pressure Coolant Pressure: 30 bar Chip Conveyor Chip Conveyor: Cross conveyor, discharging to the left Discharge Height: 1,200 mm Machine Enclosure Enclosure: Double sliding door Work Area: Walk-in Spindle Overhaul Year of Spindle General Overhaul: 2025 Investment Costs: 36.5 thousand EUR EQUIPMENT Chip Conveyor Walk-in Work Area High-Pressure Coolant System Tool Changer with 16 Positions HSK100 Tool Holder Double Sliding Door Operating Manuals Installation Documents Wiring Diagrams, partially available Documentation of Machine Components Documents for the Control System Documents for the Chip Conveyor Other Original Documents from Commissioning Documents for the Spindle Overhaul Test Report of the Spindle Overhaul Extensively Overhauled Capellini High-Performance Spindle Renewed Precision Bearings Renewed HSK100 Clamping System Renewed Balluff Sensors Refurbished Spindle Shaft Renewed Wear Parts Finely Balanced Spindle according to ISO 1940 System-Balanced Spindle Assembly Chuck and Jaws

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 28,000 h, controller model: Siemens Sinumerik 840 D SL, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working length: 4,000 mm, working width: 2,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Resonator power: 5 kW Working area (L × W): 4,000 × 2,000 mm Sheet metal thickness, steel: max. 25 mm Sheet metal thickness, stainless steel: max. 20 mm Sheet metal thickness, aluminum: max. 20 mm Speed: max. 235 m/min Accuracy: 0.001 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D SL Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine weight: 13,000 kg Operating hours: 28,000 h EQUIPMENT LiftMaster Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning TRUMPF laser Solid-state laser TruDisk 5001 with one LLK outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Cutting head Universal cutting unit with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet metal edge detection 17-inch touch color display Simple workshop programming Advanced workshop programming Fast reproduction Integrated technology data Automatic shutdown Gujdpfjz Npdgsx Ag Soh FastLine FlyLine AdjustLine Remote service via internet USB interface RJ-45 network connection CE marking Light barriers Multi-camera base system Compact dust extraction system Machine enclosure with certified viewing window, door on the right Electric roll-up roof Retrofitting capability for max. 2 additional LLK outlets

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, FEATURES OF THE LINE FUSION 4H 4-head welding machine Frame unloading unit First Q-MATIC 1 milling module Gedpfxey S E E Nj Ag Sjuh Serial connection between welding machine and cleaning unit Rotating table TRIMMER 4A electronic cleaning unit Extraction table Second Q-MATIC 2 milling module Refilling unit Automatic frame unloading

Year of construction: 2007, condition: used, functionality: fully functional, Complete set of machines for the production of PVC joinery – sold ONLY AS A WHOLE. The set includes the following machines: - CLEANING MACHINE Elumatec EV 834/01 (8340120611 - 11/2007) Guedpfx Ajzxdf Ejg Sjh - MILLING MACHINE Elumatec GF 171/00 (1710821408 - 08/2008) - MACHINE FOR CUTTING GLASS HOLDERS PERTICI BS771 (05V150 - 2005) - WELDING MACHINE Elumatec ZS 720/00 (7200020800 - 12/2004) All machines are in good condition and fully functional. An industrial vacuum cleaner for PVC chips is also included as a bonus with these machines.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller model: SIEMENS 840 D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 640 mm Number of pallets: 2 Table size: 2 × 1,000 × 450 mm Table load capacity: 600 kg Spindle speed range: 50–10,000 rpm Drive power: 18.5 kW Guedpfx Ajz Ibb Teg Sjh Tool interface: DIN 69871 / ISO 40 Feed rate range X/Y/Z: up to 10,000 mm/min Rapid traverse rate in all axes: 30 m/min MACHINE DETAILS CNC path control: SIEMENS 840 D Number of tool positions: 30 Machine dimensions & weight Machine dimensions L × W × H: approx. 3,605 × 3,041 × 3,220 mm Machine weight: approx. 6,700 kg EQUIPMENT 2-position pallet changer 30-position tool changer Internal coolant supply (ICS) Full enclosure with electrically interlocked safety doors Linear guides with double roller recirculating bearing for even absorption of high torques in all directions Ball screws in all 3 axes Machine bed made of Meehanite cast iron for high precision, rigidity, and vibration damping Swivel chip conveyor with integrated coolant system Preparation for 4th axis CE compliant

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Guedpfxsz Hxclj Ag Seh Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Magazine capacity: 20 MACHINE DETAILS Control system: Heidenhain TNC 410 Workpiece clamping area: 1,000 × 500 mm EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various SK 40 tool holders Electronic handwheel Coolant system with high-performance pump Coolant pressure: 20 bar Chip conveyor Operating manual

Condition: used, machine/vehicle number: 007901, Position 1: Panel Feeding and Loading FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 2: introducer FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 3: Batch 1 edge banding machine for doors FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 4: Roller Conveyors FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 5: introducer FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Gjdszwmbajpfx Ag Ssuh Position 6: Single Edgebanders FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 7: Panel Stacking and Offloading FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE

Condition: used, Krauss-Maffei Door Foaming Carousel (Unused), Wet Box System, Fixture Dimensions Length x Width x Height 2300/950/200mm, Cycle Time 12 Seconds, 24 Foaming Fixtures, 2 x Mixing Heads, Mould Change Over/Storage System, ABBiRB 6700 Loading & Unloading Location: These lots are located in Porcia, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Gusdpfx Aez I S Dfeg Ssh

Condition: good (used), Code: 0253 Brand: LARI E LARI - ITALY Model: FR 20 - TA - CE Standard Working center for milling and boring on wood or plastic and composite materials, wooden doors, window frames - CE Standard Technical data: X-axis working stroke 3250 mm Y-axis working stroke with 90° cutter 130 mm Z-axis working stroke with 0° cutter 290 mm Z-axis working stroke with 90° cutter 175 mm X-axis working speed mt/min 40 Y-axis working speed mt/min 30 Z-axis working speed mt/min 30 Hinge boring inserting unit: Male/Female Speed control inverter Probe Tool holder collet ER 25 Power of anuba head drilling electric spindle 2,2 Kw Anuba head inclination -10 +90° Electric spindle for milling: 2,7 Hp at 18,000 rpm Collet chuck ER 32 Variable speed via inverter Inclination from 0 to 90° for both vertical and horizontal machining Machine computer: numerical control - Windows XP operating system - color video - alphanumeric keyboard - USB port - interpolation Work table with 3 sliding clamps for locking workpieces Installed power 12 Kw Suction mouth diameter 120 mm Compressed air 7-8 bar Overall dimensions for transport mm 4100 x 1500 x 2100 h Machine weight 1400 kg Gujdpfox A Hdxox Ag Ssh Electrical panel 250 kg

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal cost of 20.000 Euro: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- Gusdpfjy Hl Iysx Ag Soh - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Year of construction: 2018, Turning machine for door panels Manufacturer: Kraft Year of manufacture: 2018 Guedez A S H Ajpfx Ag Seh Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Gjdpfx Agjz Rqcmj Seuh Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.

Condition: used, machine/vehicle number: 007893, Position 1: Panel Feeding and Loading FERWOOD CUSTOMIZED-FW-SB DOORFLEX LINE Position 2: introducer FERWOOD CUSTOMIZED-FW-SB DOORFLEX LINE Gusdpezwmbtsfx Ag Seh Position 3: Batch 1 edge banding machine for doors FERWOOD CUSTOMIZED-FW-SB DOORFLEX LINE Position 4: Panel Stacking and Offloading FERWOOD CUSTOMIZED-FW-SB DOORFLEX LINE Position 5: return stacks FERWOOD CUSTOMIZED-FW-SB DOORFLEX LINE

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2013.11.293, overall weight: 8,000 kg, HEESEMANN MFA IMPRESSION 2013 WIDE BELT SANDER – JBS Industrial wide belt sander HEESEMANN MFA Impression from 2013, manufactured in Germany. The machine is designed for sanding wood surfaces and wood-based materials. It is a solution for carpentry workshops, furniture manufacturers, door manufacturers, and manufacturers of finishing elements. Through-feed material transport and roller tables on the infeed and outfeed sides facilitate the handling of large parts. The operator panel with a screen enables control of the machine's operation, and side doors provide access to the sanding units. TECHNICAL DATA: – brand: HEESEMANN, – model: MFA Impression, – manufacturer: Karl Heesemann Maschinenfabrik GmbH & Co. KG, – year of manufacture: 2013, – country of manufacture: Germany, – machine number: 2013.11.293, – operating voltage: 400 V, – frequency: 50 Hz, – total power according to the nameplate: 97 kW, – rated current: 205 A, – control voltage: 24 V DC / 230 V AC, – total weight: 8000 kg, – CE marking. EQUIPMENT: – operator panel with screen, – belt conveyor, – infeed roller table, – outfeed roller table, – sanding units with separate drives, – CSD pressure system marking, – connections for dust extraction system, – pneumatic elements with a pressure gauge, – emergency stop buttons, – side access doors to the units. Gusdpfx Aez Rnugsg Soh Transportation to the specified address can be arranged for an additional fee. Please contact us for more information. We invite you to contact us and view our other listings. WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: excellent (used), empty load weight: 5,260 kg, maximum load weight: 12,740 kg, overall weight: 18,000 kg, first registration: 04/2014, loading space length: 6,950 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, loading space volume: 44.81 m³, total length: 7,280 mm, total width: 2,600 mm, total height: 3,900 mm, fuel type: diesel, fuel: diesel, Equipment: ABS, EBS, Key Features Internal Reference: 26389M Chassis Number: AH1814870814367 Vehicle Model: AH18 Vehicle Make: FABAG Product Category: Box Van Condition: Used Date of First Registration: 04/30/2014 Last Inspection Date: 04/10/2025 Fuel Type: Diesel Overall Vehicle Condition: Very good Gjdpjz Hn E Asfx Ag Souh Suspension: Air-Air Hydraulic System: None Cab Vehicle Equipment: ABS, EBS Axles & Tires Axle 1: 385/65 R22.5, 10mm, Disc Brakes, Air Suspension Axle 2: 385/65 R22.5, 10mm, Disc Brakes, Air Suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight: 18000 Payload: 12740 Unladen Weight: 5260 Vehicle Height: 3900 Vehicle Length: 7280 Vehicle Width: 2600 Body Body Manufacturer: FABAG Body Model: Climate-controlled Box Van Body Internal Dimensions (L x W x H): 6950x2480x2600 Body Manufacturing Year: 2014 Body Note: Manufacturer: FABAG, Model: Climate-controlled Box Van, Year: 2014

Year of construction: 1998, condition: excellent (used), machine/vehicle number: TH20010018, Demag bridge crane, crane canopy, crane track, indoor crane, crane Payload / lifting capacity max. 3.2t - 3200KG, track 13300mm Outer dimensions with head carriage approx. 13500mm Crane with FU control and servo motors!!! 2x Demag DH rope hoist with floor and radio control RC-J for individual or tandem control of both hoists Height from top edge of crane to hook approx. 900mm Head carriage length with buffer approx. 2500mm Guedpfxsv A Rr Ds Ag Sjh Lifting height of rope hoist 6000mm Weight approx. 3200KG incl. 2x 25m guide rails HEB400 (400x300mm), incl. power rails!!! Beam lengths per side: 1x approx. 15m 1x approx. 10m Support spacing 10/10+5m Crane is dismantled, immediately available from location 75053 Gondelsheim Very good used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Condition: used, Year of construction: 2010, max. workpiece length 4500,6000 mm profile spindle 4 Stück main drive 30 kW Weinig Conturex C226 Machining Center ----- For sale on behalf of a client; includes software (Klaes) and tooling (Oertli) for IV68/IV78/IV92 and Wood/Alu 68–92 systems. Machine still is electrically connected. Technical specifications and window cross-sections available upon request! ----- Price of the above-mentioned machine available upon request! ----- Dismantling and reinstallation available upon request! Gjdpszqvnijfx Ag Souh (Technical specifications provided by the manufacturer – subject to change/no liability assumed!) All prices are net, plus statutory VAT.

Year of construction: 2006, condition: ready for operation (used), An inspection is possible. Gujdeqvnmbjpfx Ag Seh

Year of construction: 1990, condition: good (used), I sell the door production machine MAKA, year 1990. Combined oscillating mortiser and drilling machine. Gedegiwl Dspfx Ag Sjuh Available immediately

Condition: excellent (used), Year of construction: 2000, CHAIN MORTIZER for door production Max slot length : 300 mm Max slot depth : 170 mm Transversal head stroke : 100 mm Head tilting Chain engine : 5,5 Hp 2 x horisontal drills , Ø : 38 mm, CC distance : 75 mm Godpfx Aoyryyaeg Seuh 2 x vertical drills : CC distance : 85 mm Pneumatic clamping.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Drill, HESS door handle. Single-unit with pneumatic clamps. For PVC and ALU windows. Gjdpsv H E Alsfx Ag Seuh

Year of construction: 2009, condition: ready for operation (used), LAMINATING MACHINE FOR IPS DOORS MODEL: PC-2500-SCBP Machine for applying adhesive protective film to flat surfaces. Equipped with motorized feed with rollers and an automatic cutting system. Machine for a fixed-height table line, +/- 900 mm. Year 2009. Simultaneous top and bottom adhesion. TECHNICAL CHARACTERISTICS OF THE MACHINE - MINIMUM / MAXIMUM WORKING THICKNESS 15 / 50 MM - MAXIMUM WORKING WIDTH 2,400 MM - HEIGHT OF ROLLER, ADJUSTABLE FROM THE FLOOR 840 / 950 MM - TOTAL POWER CONSUMPTION OF THE MACHINE 3 KW - MINIMUM REQUIRED AIR PRESSURE 6 BAR - ELECTRICAL INSTALLATION VOLTAGE 220 V - 380 V Gujdpfxjhkr Ane Ag Soh

Condition: good (used), mileage: 6,25,836 km, power: 118 kW (160.44 HP), first registration: 01/2011, fuel type: diesel, tire size: 205/75R17,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 7,030 mm, total width: 2,600 mm, total height: 3,440 mm, loading space length: 3,580 mm, loading space width: 2,260 mm, loading space height: 2,340 mm, Year of construction: 2011, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, seat heater, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Halogen lamp - Short cab - Manual - Radio/cassette - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Payload: 2095 kg, Tare weight: 5395 kg, Gross vehicle weight: 7490 kg, Total tank capacity: 150 liters, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Seat heating, Engine power: 118 kW (158 Hp), Number of cylinders: 4, Displacement: 4462 cc, Fuel: Diesel, Euro: 5, Transmission type: Automatic, Transmission type: ZF, Gears: 6, Power steering, ABS, Starter battery, System length: 88 cm, System type: ,,,,, Central locking, Number of seats: 2, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Manufacturer of cooling unit: Konvekta, Model of cooling unit: .?, Cooling unit: Cooling compressor, Body insulation, Wall thickness: 90 mm, Type of cooling: Cooling and freezing, Day/night cooling: Day cooling, Additional evaporator, Spare wheel, Tread depth spare wheel: 11% = Additional Information = Transmission Transmission: ZF, 6 gears, Automatic Axle Configuration Tire size: 205/75R17.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 4 mm; Tire tread depth right: 4 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 5 mm; Tire tread depth left outer: 6 mm; Tire tread depth right inner: 5 mm; Tire tread depth right outer: 5 mm; Suspension: Air suspension Weights Unladen weight: 5,395 kg Payload: 2,095 kg GVW: 7,490 kg Functional Loading area height: 101 cm Cooling unit: engine-driven Wall thickness: 90 mm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: BX-XT-09 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Guodpfsyzx Ddex Ag Sjh Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request through our website. Inquire directly about our European warranty package.