Used Doosan Dl 450 for sale (292)

Condition: excellent (used), Year of construction: 2015, 1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, 40 station ATC, 12 station lower turret, milling speed 4,000rpm, 22kW spindle motors, FANUC 31i control, Nledpfew I Tnisx Akfja 3 Jaw Power Chuck, Swarf Conveyor, Coolant

Condition: like new (used), Year of construction: 2022, 3-Axis CNC Lathe Type: Puma GT 2600 LM Manufacturer: Doosan Year of manufacture: 2022 New Fanuc i Series Plus touch control 12-inch Samchully hydraulic chuck Maximum turning diameter: 410 mm Maximum turning length: 1030 mm Spindle bore: 81 mm Spindle speed: 3500 rpm Nodpfxjywthvs Akfjla Turret: 12 positions BMT 55 Driven tool speed: 5000 rpm X: 265 mm Z: 1100 mm C: ±360° LNS chip conveyor Tool probe MT5 tailstock Including: 4 driven tool holders 2/2 8 standard tool holders Total: 12 pcs Documentation Machine as new, only 1,800 operating hours Available for inspection in our warehouse

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter over cross slide: 630 mm, turning length: 760 mm, turning diameter: 376 mm, spindle bore: 92 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,163 mm, total length: 3,560 mm, total width: 1,945 mm, turning diameter over bed slide: 780 mm, overall weight: 6,550 kg, bar passage: 81 mm, Equipment: documentation/manual, I am offering a Doosan Puma 2600 SY II CNC lathe, a high-productivity machine equipped with a Y-axis, main spindle, and sub-spindle, ideal for complete machining operations in a single setup. The machine is fitted with a bar feeder and numerous accessories, is fully operational, and can be seen running by appointment. Nodpoymdt Tefx Akfsla The lathe is in excellent operating condition, regular maintenance has been performed, and it can be demonstrated in idle mode by appointment. Included accessories: . Top Automazioni bar feeder model X-Files S380SX . Chip conveyor . Tool presetting system . Bellegrandi collet chucks on main and sub-spindle . Workpiece pick-off arm with conveyor belt . Static and driven tool holders

Condition: good (used), Year of construction: 2014, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Nljdpfx Aowtg Inekfea Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg

Condition: good (used), Year of construction: 2016, spindle speed (max.): 3,500 rpm, overall weight: 6,450 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Sub-spindle: 4500 1/min Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw Tool speed max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Nsdpewtg R Ajfx Akfola Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight.: 6450 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, Control brand: FANUC Control model: 21T Machine depth: 1850 mm Machine weight: 3000 kg Nlsdpfx Ajy Eyazjkfea Max. turning length: 450 mm Max. swing over cross slide: 310 mm Max. swing over bed: 500 mm Spindle bore: 77 mm Tool stations in turret: 12 pcs Turret traverse x / z: 200 / 450 mm Rapid traverse x / z: 24 / 30 m/min

Condition: ready for operation (used), Year of construction: 2015, operating hours: 7,200 h, spindle speed (max.): 2,000 rpm, travel distance X-axis: 352 mm, travel distance Z-axis: 1,105 mm, controller manufacturer: FANUC, number of axes: 2, This DOOSAN PUMA 4100B was manufactured in 2015. A robust horizontal turning machine featuring a Fanuc 32i CNC system, it offers a maximum turning diameter of 550 mm and a length of 1,042 mm. Equipped with a 10-station turret and a chip conveyor, it's ideal for efficient machining with 7,200 hours of operation. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 4100B machine we have for sale. Contact us for more information. • CNC: Fanuc 32i with Manual Guide • Chuck diameter: 380 mm • Max turning diameter: 550 mm Njdpfx Aox D Dtaekfola • Max turning length: 1,042 mm • Bar capacity: 117 mm • Turret: 10 stations • Condition: Machine overhauled Additional equipment • Chip conveyor • Touch probe arm

Condition: used, Year of construction: 2007, operating hours: 67,434 h, functionality: fully functional, machine/vehicle number: PT18SY0210, turning length: 300 mm, turning diameter: 230 mm, spindle motor power: 18,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 205 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, feed length Z-axis: 350 mm, feed rate Z-axis: 30 m/min, chuck outer diameter: 250 mm, bar diameter (max.): 65 mm, overall weight: 8,800 kg, We are offering a high-performance and reliable Doosan TT1800SY CNC turning center, ideal for demanding serial production as well as complex precision machining. Key Features: Dual spindle (main + sub spindle) Y-axis for off-center and complex machining Twin turret system (upper + lower turret) Live tooling capability Nedpey D Rypjfx Akfsla Full spindle synchronization (simultaneous machining) High productivity with reduced cycle times Technical Specifications: Max. turning diameter: approx. 230 mm Max. turning length: approx. 300 mm Bar capacity: approx. 65 mm Spindle speed (main/sub): up to 5,000 rpm Spindle motor power: ~18.5 kW Y-axis travel: ±50 mm X/Z axis travels: approx. 205 mm / 350 mm Rapid traverse rates: up to 30 m/min Turrets: 2 × 12 stations Live tooling speed: up to 6,000 rpm Tool holders: BMT55 Control system: FANUC 18iTB C-axis: both spindles

Condition: used, DOOSAN PUMA 280 – Year 2012 Ø630 mm Swing Over Bed Ø 500 mm Swing Over Saddle Nlodjy Hgwcspfx Akfsa Ø 420 mm Maximum Turning Diameter 658 mm Maximum Turning Length Ø 76 mm Bar Working Diameter 3500 rpm Spindle Speed 10 Tool Stations Chip Conveyor and Box

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS Control: CNC Fanuc I Series Swing diameter over bed: 250 mm Max. machining diameter: 250 mm Max. turning length: 510 mm Spindle Spindle bore: 53 mm Spindle speed: up to 6,000 rpm Drive power: 12 kW Axes X-axis travel: 175 mm (160 mm + 15 mm) Z-axis travel: 550 mm C-axis Tool turret Turret: 12-station BMT 45 Driven tools: All 12 stations 2 x radial driven tool holders 2 x axial driven tool holders Chip conveyor MACHINE DETAILS Machine weight: 4 t LNS loader not included in the offer Machine was mainly used for plastics processing! Cutting hours approx. 5,000 hrs. Njdoyvgztopfx Akfola

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle. Nljdpfxeyzzf Re Akfsa Condition: Very well preserved, machine comes from a company liquidation. Time recording: Control unit on: 13127 hours Runtime: 3833 hours Processing time: 2835 hours The upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning. Fanuc 31i-B CNC control Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/continuous): 76/76 mm Y-axis travel: 230 mm (±115 mm) Clamp (counter spindle) ASA interface: A2-8 Spindle speed: 4000 rpm AC motor power (cont./30 min.) 22/26 kW Turning/milling head B-axis rotation / indexing 240 deg. (±120 deg.) Tool holder Capto C6 Speed in revolutions per minute 12000 rpm AC motor power 30 min. 15/18.5 kW 40-station ATC Tool turret Number of driven tools 12 (12)

Year of construction: 2016, condition: ready for operation (used), - USED - 7-AXIS TWIN-SPINDLE CNC LATHE Nledpfx Aoyyd Ulekfoa MAX ROTATING DIAMETER: 800 mm MAX TURNING LENGTH: 350x2 mm MAX TURNING DIAMETER: 300 - 390 mm BAR CAPACITY: 76 mm SPINDLE: 3500 rpm; 22-26 kW; ASA A2-8 COUNTER SPINDLE: 3500 rpm; 22-26 kW; ASA A2-8 X1-AXIS TRAVEL: 255 mm X2-AXIS TRAVEL: 190 mm Y-AXIS TRAVEL: ± 60 mm Z1-AXIS TRAVEL: 800 mm Z2-AXIS TRAVEL: 900 mm RAPID FEEDS X-Y-Z: 20 - 7,5 - 24 m/min DRIVEN TURRET HEAD: 12 ; 12 POS; 4000 ; 4000 rpm; 5,5 ; 5,5 kW CONTROL UNIT: FANUC 31i-B WEIGHT: 12700 Kg OVERALL DIMENSIONS: 4050 x 2210 x 2480 mm ACCESSORIES: SWARF CONVEYOR ; PIECE CONVEYOR ; TOOL SETTER

Condition: used, Year of construction: 2017, operating hours: 524 h, load capacity: 3,000 kg, lifting height: 4,760 mm, free lift: 1,690 mm, fuel type: gas, mast type: triplex, construction height: 2,180 mm, drive type: Treibgas, LPG forklift Nljdpfx Aksyfy Ahjfsa Mast type: Triplex Transmission: Automatic Front tyres type: Superelastic Front tyres size: 650-10 Rear tyres type: Superelastic Rear tyres size: 28x9-15 Sideshifter, fork positioner, Power steering; wiper; operating weight with superstructure: 4798 kg Front windscreen, half-cab,

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -10,4 " display - 200mm raised block for Z-axis - 12.000 RPM spindle 28 kW, 159,3 Nm -BT40 -30 tools magazine - 18 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -tool breakage detection with needle Nsdoy Dtlzjpfx Akfola -automatic doors -robot interface -4th axis preparation -GSA CNC 400-R rotary table -GSA TSA-320S suport -Hydraulic aggregate 200 bar 2(3 A+B) -preparation for rotary table hydraulic 2x(3A+B) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. Nlsdpfoy Dr A Esx Akfsa The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 250 rotary table -HIWIN RTS 250 suport -Hidraulic aggregate 200 bar 2 A+B -4th axis fixture support hydraulic (3x oil, 2x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: used, power: 81 kW (110.13 HP), Year of construction: 2015, operating hours: 6,035 h, Empty weight: 1 kg Please contact Emal Jaweed for more information Nsdpfx Ajy Ey D Hokfola

Condition: used, functionality: fully functional, machine/vehicle number: 3003, Year of construction: 2015, operating hours: 4,372 h, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, power: 10 kW (13.60 HP), drive type: Elektro, Electric 3-wheel forklift Chassis number: 3003 Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Super elastic Front tire condition: 60 - 80% Rear tire type: Super elastic Rear tire condition: 60 - 80% Nljdpfxjym Hgve Akfea Battery voltage: 48V Battery type: PzS Side shifter, 3rd valve, rear work lights, front work lights, roof cover, safety light,

Condition: used, functionality: fully functional, machine/vehicle number: 2506, Year of construction: 2020, operating hours: 271 h, load capacity: 1,250 kg, lifting height: 3,300 mm, fuel type: electric, mast type: telescopic, construction height: 2,005 mm, fork length: 1,200 mm, drive type: Elektro, High-lift truck Chassis number: 2506 Load centre: 600 Mast type: Telescopic Condition: Ready for operation and fully functional Nodpfx Akjym Hf Esfsla Technical condition: good Front tyre type: Superelastic Rear tyre type: Superelastic Battery voltage: 24V Battery type: PzS Battery year of manufacture: 2020

Condition: used, FOR SALE / refpuma21042026 • CNC Vertical Turning Lathe Doosan PUMA VT1100 / year 2008 CE MARKED • Model/Type: Doosan PUMA VT1100 • Year of manufacture: 2008 • Control: Fanuc I series • Max. turning diameter: 1100 mm (43.3 inches) • Max. turning length/height: 1000 mm (39.4 inches) • Chuck size: 32 inch or 40 inch • Max. swing over bed: 1270 mm – 1400 mm • Spindle speed: 850 RPM (2-stage ZF gearbox) • Main spindle power: 60 HP (45–60 kW / approx. 87 HP in some configurations) • Max. torque: 7552 Nm (5573 ft-lbs) • Turret capacity: 12 positions • Maximum table/workpiece weight: Approx. 2,300 kg • X-axis travel: 650 mm (25.59 inches) • Z-axis travel: 1000 mm (39.4 inches) • Rapid traverse (X/Z): 20 m/min • Machine weight: approx. 22,000 kg (48,502 lbs) Nlsdpfx Asy E Hhlekfja

Year of construction: 2005, condition: used, max. turning diameter 540 mm max. turning length 1.020 mm bar capacity 65 mm Spindle speed 5.000 min -1 driven tools turning speeds 10.000 U/min control FANUC 18i-TB Dimensions (L x W x H) 4.520 x 2.300 x 2.600 mm machine weight ab. 12.000 kg CNC Turning- and Milling Center | DOOSAN - PUMA MX 2000 S equipped with chip conveyor. Additional equipment: + counter spindle + B axis The machine is in good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Nledpfxjlmr Eis Akfea #Tags: MX2000S | MX-2000 S | MX 2000S | MX2000 S

Condition: used, Year of construction: 2018, travel -x axis 1.050 mm travel -y axis 570 mm travel -z axis 510 mm control HEIDENHAIN - TNC620 number of spindle speeds 12.000 U/min tool taper BT 40 table dimension (L x W) 1300 x 570 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. Nlsdpfow Dgcasx Akfoa The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: excellent (used), Year of construction: 2016, operating hours: 3,204 h, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 562 mm, turning diameter: 390 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,700 mm, total length: 2,834 mm, total width: 1,628 mm, turning diameter over bed slide: 600 mm, overall weight: 3,500 kg, bar passage: 65 mm, chuck outer diameter: 210 mm, spindle nose: ASA A2#6, Equipment: documentation/manual, Doosan Puma GT 2100 CNC lathe, year 2016, in excellent working condition and ready for production. Reliable and high-performance machine, ideal for precision turning operations in small and medium batch production. Equipped with tailstock, 12-position static turret, tool presetting system, 6 boring bar holders, and chip conveyor. Only 3,204 cutting hours. The machine is sold complete with all paper manuals. Robust construction, high accuracy, and excellent productivity. Njdpfx Ajy Dunwjkfola An ideal solution for machine shops and subcontractors looking for a modern CNC lathe fully equipped with accessories. Machine available for inspection under power by appointment.

Condition: used, Year of construction: 2016, operating hours: 11,200 h,

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,437 h, load capacity: 3,000 kg, lifting height: 5,560 mm, free lift: 1,650 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,500 mm, power: 343 kW (466.35 HP), motor manufacturer: Doosan, fork carriage width: 1,040 mm, fork length: 1,200 mm, fork width: 100 mm, fork thickness: 45 mm, turning radius (inner): 1,900 mm, turning radius (outer): 2,450 mm, tire condition: 40 %, front tire size: 28x9–15, rear tire size: 6.50–10, overall weight: 4,175 kg, Equipment: CE marking, front guard, full service history, head guard, lighting, pallet forks, === KEY SPECIFICATIONS === Year of manufacture: 2017 Hours: 2437 h Maximum lifting capacity: 3000 kg Maximum lifting height: 5560 mm Mast type: Triplex (FFT) Nsdpfxsxzgyde Akfola Fork length: 1200 mm Side shift: No Drive: Diesel Transmission: Automatic Cabin: Enclosed cabin Heated cabin: No Tyres: Pneumatic tyres Stabilizers: No Engine manufacturer: Doosan Emission class: Stage IIIA Weight: 4175 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and complete documentation included Ready for immediate transport and use Comprehensive technical documentation available === CONDITION === Excellent working condition – fully inspected, serviced, and tested by certified professionals. Inspection available upon request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price €13,875 (EXW, excl. VAT) Reliable machines from first owner with full maintenance history and professional technical support. Benefit from one of the largest European stocks of new and used equipment. All machines are fully inspected, CE-approved, and ready for immediate operation. Spare parts and expert assistance available upon request. === SHIPPING === Crane loading available on request for smooth handling during dispatch. Flexible shipping options tailored to your destination and logistics requirements. All transports professionally arranged by the Collé Rental & Sales logistics team.

Condition: good (used), Year of construction: 2014, Gas forklift DOOSAN GX30 (model G30G), No. FGA0Y-1480-00876, year of manufacture 2014, lifting capacity 3,400 kg, lift height 3,000 mm, mast height approx. 250 cm (duplex mast), hydraulic side shift, 2,106.5 operating hours (read from the meter). Nljdpfxsy D Dxxo Akfoa