Used Double Hydraulic Pump for sale (29,302)

Condition: good (used), Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Dimensions: 300/120/110 mm Podpfxob A Itbe Afhjpl -Weight: 9 kg

Condition: good (used), Double hydraulic pump, oil pump, gear pump Ppedsb A H Idjpfx Afhel -Shaft mounting: Ø 21.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

Condition: good (used), Double hydraulic pump, oil pump, gear pump -Shaft diameter: Ø 22.5 mm Price: per piece -Quantity: 2 available -Dimensions: 300/120/110 mm -Weight: 9 kg Pedpfxob A Ipno Afhepl

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, overall weight: 80 kg, total length: 600 mm, total width: 500 mm, total height: 950 mm, operating pressure: 500 bar, TECHNICAL DETAILS Nominal flow rate: 9.2 - 1.6 l/min Pedpfx Aeyf Akzefhopl Max. pressure: 500 bar MACHINE DETAILS Dimensions & Weight Dimensions (LxWxH): 600 mm x 500 mm x 950 mm Weight: approx. 80 kg EQUIPMENT Unit is mobile (on wheels)

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW Pjdpfxoydluto Afhopl

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Pedpfx Aompfwdofhepl Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Year of construction: 2010, condition: used, tank capacity 400 l working pressure 35 U,210 bar Pedpfx Afsm Sk Rgohspl feed pressure / bar weight 900 kg required space 1,72 x 1,00 x 1,81 m

Year of construction: 2003, condition: used, tank capacity 160 l feed pressure 160 bar weight / kg Psdjn Tvg Eepfx Afhepl

Condition: used, Technical details: Podpexraxhofx Afhjpl hydraulic pump: 380 V 50 Hz 0,85 kW weight of the machine ca.: 56 kg dimensions of the machine ca.: 600 x 400 x 650 mm max. working pressure: 400 bar cycle time : 1-60 per min. control voltage: 24 V

Condition: refurbished (used), Double pump for Battenfeld SYDFEE-20/140R MNR: R900730346 SYDFEE-20/045R MNR: R900703325 Ppjdpfjx Uq Dpjx Afhel

Year of construction: 2008, condition: used, Field of application: Freight transport Attachment suited for: Loading and unloading machines Please contact ATS Norway for more information Please provide reference number upon request: 20081 Specifications: Ppedpfx Aew Ia Ngofhol 2008 model Weight: 750 kg Hydraulic pump Length: 12 meters Ready for delivery Description:2008 Palfinger PK 14080 C crane with hydraulic pump.The crane was overhauled when the owner purchased it.Ready for delivery. Own weight: 750 Model: PK 14080 C kran m/ hydraulikk pumpe

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved. Ppedpex Sr Evofx Afhjl

Condition: good (used), Year of construction: 2008, machine/vehicle number: 108334, Offer 25518 Hydraulic, Twin-column Guided Mitre Band Saw Technical Data: - Cutting range at 90° • Round: 310 mm • Flat: 520 x 310 mm - At 45° left, flat: 350 x 310 mm - At 30° left, flat: 230 x 310 mm - At 45° right, flat: 260 x 310 mm - Mitre adjustment left and right - Minimum workpiece dimensions (round/flat): 10 / 10 x 8 mm Pedpfsyc Um Njx Afhspl - Smallest cut length: 40 mm - Mitre angle display - Saw band dimensions: 5000 x 34 x 1.1 mm - Variable cutting speed: 20 - 140 m/min - Infinitely adjustable cutting pressure: 0 - 10 m/min - Hydraulic workpiece clamping with adjustable clamping pressure - Bundle clamping device - Total drive power: 400 V / 6.0 kW - Space requirement approx.: W 3000 x H 1600 x D 1750 mm - Weight approx.: 1900 kg - Discharge roller conveyor with position-controlled length stop: 6000 mm - 1 x Infeed roller conveyor: 2500 mm - 3 x Infeed roller conveyors: 1200 mm each

Condition: used, Year of construction: 1976, Technical details: tank capacity: 35 l motor: 1,1 Flow rate: 12 l / min pressure capacity: ca. 24,5 bar total power requirement: ca. 1,2 kW dimensions L x W x H: 0,7 x 0,9 x 1,2 m Podeu N E Idjpfx Afhjpl For testing hydraulic systems Flow rate 1420 l/min. *

Condition: used, Year of construction: 2005, Technical details: Pjdpfx Aeu N E Nusfhopl Total power requirement: 6,4 kW machine weight approx.: 250 kg dimensions L x W x H: 1,4 x 0,9 x 1,4 m 2 pieces DOSING SYSTEM available. technical Details: - system pressure 125 bar - flow rate 3 l/min - reservoir preload pressure 80 bar - Motor SEW Eurodrive, 1410/1710 U/min erquipped: - hydraulic tank with 200 liter content, size L:850 x W:630 x H:380mm - oil basin size L:1100 x W:850 x H:380mm *

Condition: used, Technical details: tank capacity: 250 l overpressure : - bar motor: - dimensions L x W x H: auf Anfrage m There are 5 hydraulic pump units available for sale. (price per piece) Device no. 1 + no. 2 + no. 6: Features: Operating pressure max. 150 bar, connection Ø outside 30; 45; 52mm, capacity 250 litres, nitrogen capacity 20 litres Pressure 90 bar Device No. 4 Features. Operating pressure 160 bar, connection Ø outside P2=30; P1=45: Operating pressure 160 bar, connection Ø outside P2=30; P1=45; T=52; L=26mm, capacity 250 litres, nitrogen capacity 2x 10 litres Pressure 54 bar Psdpfx Afju N E N Iehspl Device No.7 Features. year of construction 2001, operating pressure 100 bar: year of construction 2001, operating pressure 100 bar, connection Ø outside P2/P3=26, P1=22; L=36mm, capacity 160 litres, nitrogen capacity 10 litres pressure 90 bar *

Condition: used, Year of construction: 2001, Technical details: Psdpfxeu N E Rfe Afhspl pressure: max. 275 bar stroke length max.: 600 mm weight: 1,5 t dimensions L x W x H: 2,8x0,6x0,6 m hydraulik operation cylinder - outer dimensions hydr. cylinder diameter=300 x 830mm - outer dimension operation cylinder diameter=360 x 750mm - stroke cylinder diameter 160 x 600mm equipment: - 1 hydraulic connection 1/2" - 2 fixing flanges (490x490mm) - 4 supports (Dm=60 x 800mm) - 2 sheet covers for flanges 600x600x80mm *

Condition: used, Technical details: Pedpou N E I Rofx Afhopl tank capacity: 60 l motor: 1430 weight: 100 kg dimensions L x W x H: 0,85 x 0,45 x 0,85 m Further technical details: - speed 1,430 rpm (pump) - hydr. Connection 3/4 " - oil tank LxWxH: 810x430x40mm i.D. *

Condition: used, Technical details: tank capacity: - l overpressure : - bar motor: 1400 U/min total power requirement: 3,0 kW weight: 312 kg dimensions L x W x H: 1,05 x 0,67 x 1,94 m application use of hydraulic components Ppodpeu N E Nhjfx Afhol operation pressure min/max.: 60/70 bar - nitrogen 54 bar - hydr. tank size L: 630 x W: 440 x H: 380mm with 100 Liter content *

Condition: used, Technical details: feed pressure: 60 bar drive power: 22 kW liter capacity: siehe Typenschild l feed pressure: 50 bar drive power: 11 kW 5 hydraulic power units for sale. - 3 units with 60 bar and 22 kW (SA779/24 vane pump type PV2R3-66) - 2 units with 50 bar and 11 kW (SA 780/38) Podpfou N Eriex Afhopl Prices vary according to aggregate size. *

Condition: used, Technical details: tank capacity: 800 l overpressure : zul./max.=ca.100 bar motor: 5 weight: ca. 2,4 t Hydraulic Pressure Storage Plant - aggregate= LxWxH=2,48x1,73x2,13m - oil tank :LxWxH=2,0x1,1x0,5m - 5 motors ( from 3,8 up to 66 kW) - coolant: nitrogen Pjdou N Ervjpfx Afhspl - 5 pumps iD. *

Condition: used, Year of construction: 2001, Technical details: pressure capacity: 145 bar charging voltage: 24 V / 12 V V Pedpfx Afsu N E Hgehspl weight: 185 kg dimensions L x W x H: 1,0 x 0,5 x 0,8 m Hydraulic pressure 145 bar Input 230 v / AC Output 12 V / 200A or 24 v / 100A *

Condition: used, Technical details: tank capacity: 17 l motor: 1380 Flow rate: 2,54 l / min pressure capacity: : 340 und Pw: 310 bar total power requirement: ca. 1,5 kW weight: ca. 21 kg dimensions L x W x H: 0,5 x 0,2 x 0,6 m 4x directional valve 1x pressure relief valve Ppsdpfxsu N E H Ho Afhol 2x pressure switch 1x pressure gauge 2x bubble accumulator *

Condition: used, Year of construction: 2001, Manufacturer: SCHULER SMG, Model: HZPU-T 1000-2500/2100, Year of manufacture: 2001, Serial No.: 7.5592, Pressing force: 1,000 t, Changeable table: 2,500 x 2,100 mm, Ram surface: 2,500 x 2,100 mm, Max. ram stroke: 1,300 mm, Drawing cushion table pressure: 30-200 t, Drawing cushion stroke: 300 mm, Press control with OP Siemens Simatic OP 37, Control and switch cabinets Ppedpfxjx Ry Nto Afhel

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Manufacturer: GIGANT Model: G2-1200/2 Year: 1993 Condition: Used Stock number: 0375 Pjdpfjx R U Idsx Afhepl Pressing force: 1200 t Number of pressing points: 2 Die table size: 3,700 x 2,700 mm Ram size: 3,700 x 2,700 mm Ram stroke: 1,000 mm Max. vertical clearance: 1,590 mm Die opening at BDC: 610 mm Lower blankholder stroke: 400 mm Movable bolster: Present at the front