Used Double Column for sale (15,495)

Condition: used, Year of construction: 2016, x-travel 6.500 mm y-travel 4.250 mm z-travel 1.500 mm Control HEIDENHAIN iTNC 530 HSCI table-size 7500 x 3000 x 300 mm distance between columns 3.800 mm rapid travel x/y/z 30.000 mm/min tool taper HSK 100 number of spindle speeds 6.000 U/min/rpm Ncedpfxexb Ed Ue Adwjl transmission ratio 2 Motor output 37 kW Number of working hours 28.475 h Spindle hours 12.629 h Tools changer 60 fach/tools Internal cooling system 36 bar Chip coveyor Doppel milling head 5-Achs-Fräskopf OAD total power requirement 80 kWA weight of the machine ca. 85 t

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Nodpfxompfwdo Adwocl Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: used, x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 10 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C table load 50.000/100.000 kg drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m + electrically renewed including cabinet, cabling and motors and equipped with Nedpfx Aovkit Ajdwscl a SIEMENS 840 C in 1999. + incl. 16 milling heads and ls the drive of x-axis consists of one hydrostatic screw with hydrostatic rack

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with portable hand control unit Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x Width x Height: approx. 4,500 x 2,000 x 400 mm Longitudinal T-slots 18H12 T-slot spacing 250 mm (Shown zero-point clamping plates and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Linear axis drives Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Ncsdpfxex Ifdke Adwol Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 touch probe Condition of the machine Fully operational, machine is supplied without enclosure and must be enclosed by the purchaser in accordance with CE regulations.

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, Initial commissioning: 2005 Overhauled: 2022 Control system: SIEMENS SINUMERIK 840D PL Working area X-axis: 3,000 mm Y-axis: 2,500 mm Z-axis: 1,250 mm A-axis: +/- 100° C-axis: +/- 360° Hours Total machine hours: 110,000 h Total spindle hours: 60,000 h Current spindle hours: 1,900 h (new, February 2024) Clamping table Length x width: 3,000 x 2,500 mm T-slots: 18 H12 T-slot spacing: 250 mm Table load capacity: 5,000 kg/m² Installation: above floor Milling head VH6 Spindle power: 41 kW Spindle speed: max. 10,000 rpm Torque: approx. 200 Nm Tool holder: HSK 100A Axis clamping A & C: 3,000 Nm Drives linear axes Drive technology: linear motor Feed rate X/Y/Z-axis: 40–60 m/min Axis acceleration X/Y/Z: 3–5 m/s² Electrical specifications Voltage: 400 V Frequency: 50 Hz Nedpfox Npmrex Adwjcl Dimensions & weight Machine space requirement: approx. 7,300 x 6,500 x 5,600 mm Total weight: 60 t Additional equipment - 1x chip conveyor, left - Video camera system for work area monitoring - 40 bar ICS coolant supply with belt filter system - 11 bar external coolant supply, face end - 30-position tool changer, expandable by 20 additional positions - Renishaw RMP60 / Renishaw touch probe - BLUM tool measurement and tool breakage control

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, rotational speed (min.): 1,500 rpm, rotational speed (max.): 9,000 rpm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1997 Control system: Heidenhain Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates shown and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Linear axes drives Feed speed X, Y, Z axes: approx. 20 m/min Ncjdpfxex Iugue Adwol Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Space required by machine (without control cabinet): approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is delivered without enclosure and must be enclosed in a CE-compliant manner by the buyer. Note: The tool changer, vacuum table including pump, and extraction unit can be purchased at an additional cost. However, they are NOT included as standard equipment with the machine!

Condition: used, Year of construction: 2009, Year of manufacture: 08/2009 Commissioning: 03/2010 Control: Heidenhain iTNC 530 Nedpsya U Uuefx Adwjcl Technical Data: Tool holder: SK 50 Tool changer: 30 stations Spindle speed vertical, stepless: 4400 rpm Spindle speed horizontal, stepless: 3500 rpm Cutting capacity: 440 cm³/min Positioning accuracy: +/- 0.005/300 mm Repeatability of the automatic swivel head: +/- 3' Machine table (LxW): 4000 x 2000 mm Travel paths X/Y/Z: 4230 x 2150 x 775 mm Max. workpiece weight: 11,000 kg Rapid traverse X/Y/Z: 12 / 15 / 12 m/min Motor power: 22 kW Dimensions (LxWxH): 10,130 x 4,510 x 4,250 mm Machine weight: 27,000 kg Scope of delivery: - Chip conveyor - Tool cabinet - Approx. 80 tool holders including tools

Condition: used, Year of construction: 2005, x-travel 5.000 mm y-travel 3.100 mm z-travel 1.200 mm Control HEIDENHAIN TNC 530 HSCI table surface area 5.000 x 2.000 mm T-slots 11 T - slots - width 22 mm table weight 30.000 Kg rapid traverse X-axis 20.000 mm/min rapid motion - y-axis 30.000 mm/min number of spindle speeds 6.000 U/min/rpm Nsdpfx Ajxcbiisdwscl Spindle power 32 kW taper ISO Kegel ISO 50 distance between columns 2.800 mm Internal cooling system 20 bar weight of the machine ca. 65 t dimensions of the machine ca. 15.100x6.200x6.250 mm Head UAD II positioning 0.1º / 0. 1º Speed ranges 2 Tool clamping Hydraulic Head 2 – Vertical mandril ATC positions 30 2 longitudinal chip conveyors 1 cross chip conveyor Portable handwheel Laser tool presetter

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm Nsdpfx Aehlnzkodwjcl ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Year of construction: 1988, pressure 300 t distance between columns 1800 mm stroke 1000 mm Distance table/ram, max. stroke up, adjustment up 1300 mm Table surface area 1600 x 1200 mm Table height above floor 1080 mm Ram surface 1600 x 1200 mm Weight 24,0 t Dimensions (WxDxH) 2,8 x 2,1 x 6,0 m permitted for manual loading according to the German Safety Regulations (UVV §20) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F Video at seller's site before dismantling available Njdpovut Hnjfx Adwjcl

Condition: used, Year of construction: 1990, pressure 200 t Nodpfxevut T Ij Adwscl distance between columns 1400 mm stroke 300 mm distance table/ram, max. stroke up, adjustment up 500 mm table surface area 1300 x 1100 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 150 mm die cushion area 700 x 700 mm capacity of ejector in ram 10 t ejector stroke in ram 50 mm table height over floor 930 mm side window 770 mm ram surface 1300 x 1100 mm speed down 400 mm/s speed up 410 mm/s working speed 20 - 50 mm/s return capacity 30 t oil volume 1350 l power requirement 70,0 kW weight 23,0 t dimensions (WxDxH) 4,5 x 3,0 x 3,5 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, controllable dependent on pressure/time and way, cutting impact cushioning No foundation pit necessary

Condition: used, Year of construction: 2003, Pressure 50 t stroke 800 mm distance between columns 2250 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2250 x 1200 mm Ncsdpfsvuun Hjx Adwsl Ram surface 2250 x 1200 mm feed down 350 mm/s feed up 190 mm/s working feed 27,5 mm/s oil volume 800 l power requirement 24,2 kW Weight 13,0 t dimensions of the machine ca. 3,75 x 2,75 x 4,67 mxmxm permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic ram interlocking (Sitema), light guard with active start

Condition: used, Year of construction: 1991, pressure 500 t distance between columns 1910 mm stroke 500 mm Distance table/ram, max. stroke up, adjustment up 700 mm table surfache without cutting impact cushions 1910 x 1360 mm table surfache with cutting impact cushions 1600 x 1360 mm table height over floor 800 mm ram surface 1600 x 1270 mm Side window 600 mm speed down 400 mm/s speed up 330 mm/s working speed 10 - 28 mm/s oil volume 1200 l power requirement 60,0 kW weight 40,0 t Dimensions (WxDxH) 3,6 x 2,5 x 5,0 m height over floor 4,5 m Nsdpjvuuiqofx Adwecl permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, cutting impact cushioning, two-hand operation table size depending on cutting impact devices: - without approx. 1910 x 1360 mm - with approx. 1600 x 1360 mm can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1973, pressure 500 t distance between columns 1620 mm stroke 40 - 160 mm no. of strokes 32 / 48 Hub/min dayligth (stroke and adjustment up) 660 mm column travel -side 400 x 430 mm table surface area 1600 x 1300 mm table height over floor 750 mm ram surface 1400 x 1200 mm power requirement 44,0 / 66,0 kW weight of the machine ca. 56,00 t required space 3,55 x 2,55 x 5,1 m Nodpfevuk Euox Adwocl with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation Video of 'sister maschine' available

Condition: used, Year of construction: 2011, Pressure 200 t stroke 900 mm distance between columns 3520 mm Distance table/ram, max. stroke up, adjustment up 1400 mm Table surface area 3500 x 1600 mm Ram surface 3500 x 1600 mm Side window 1150 mm feed down 500 mm/s feed up 550 mm/s working feed 38 mm/s Nedpfxov Svbvs Adwecl oil volume 2000 l power requirement 90,0 + 21,0 kW Weight 34,00 t dimensions (WxDxH) 4,4 x 3,3 x 5,5 m permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back (cascading), hydraulic ram interlocking, operation with up to 4 operator's possible

Condition: used, Year of construction: 1979, pressure 60 t distance between columns 650 mm stroke 220 mm distance table/ram, max. stroke up, adjustment up 410 mm table surface area 600 x 525 mm pressure of drawing cushion in table 5 t stroke of drawing cushion in table 80 mm table height over floor 900 mm side window 200 mm ram surface 560 x 490 mm Nedjvuk Nmepfx Adwjcl dimensions (WxDxH) 1,9 x 1,3 x 2,7 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (Sick FGS 600), hydraulic drawing cushion in table, two-hand and foot operation No foundation pit necessary can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1996, pressure 160 t distance between columns 1380 mm stroke 300 mm distance table/ram, max. stroke up, adjustment up 500 mm table surface area 1250 x 850 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 150 mm die cushion area 450 x 450 mm Nedpfx Ajvut Ilsdwecl table height over floor 900 mm side window 250 x 400 mm ram surface 1350 x 850 mm speed down 400 mm/s speed up 350 mm/s working speed 50 mm/s oil volume 1850 l power requirement 58,0 + 11,0 kW weight 24,1 t dimensions (WxDxH) 2,85 x 2,15 x 4,6 m permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic drawing cushion / ejector in table, cutting impact cushioning, mechanical depth stop (motoric adjustable), ram interlocking can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1979, pressure 160 t distance between columns 1620 mm stroke 600 mm Distance table/ram, stroke up 800 mm Nedpovut Ryjfx Adwocl table surface area 1600 x 1100 mm table height over floor 750 mm die cushion pressure in table 63 t die cushion stroke in table 180 mm Die cushion area in table 1300 x 750 mm side window 600 mm ram surface 1600 x 1100 mm oil volume 1160 l power requirement 30,0 + 16,0 kW weight 23,6 t dimensions (WxDxH) 2,9 x 2,3 x 4,65 m Height above floor 4,26 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F Video at seller's site before dismantling available

Condition: used, Year of construction: 1991, pressure 100 t distance between columns 770 mm stroke 200 mm distance table/ram, stroke up 800 mm Table area 770 x 900 mm table height above floor 850 mm die cushion pressure in table 40 t die cushion stroke in table 200 mm die cushion area in table 600 x 600 mm side window 600 mm Njdpfx Ajvut Ufedwocl ram surface 770 x 900 mm speed down 62 mm/s speed up 350 mm/s working speed 17,5 mm/s oil volume 700 l power requirement 42,0 kW weight 9,0 t Dimensions (WxDxH) 2,6x 2,0 x 3,8 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, cutting impact cushioning, depth stop No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F - Video at seller's site before dismantling available

Condition: used, Year of construction: 1993, Pressure 250 t stroke 500 mm distance between columns 1650 mm side window 750 mm daylight 1200 mm table surface area 1650 x 1250 mm Ncsdpfx Ajv Svb Ajdwjl die cushion capacity in table 80 t die cushion stroke in table 250 mm die cushion area in table 1070 x 780 mm table height over floor 850 mm ram surface 1650 x 1250 mm speed down 10 mm/s speed up 80 mm/s working speed 10 mm/s oil volume 400 l power requirement 22,0 kW Weight 21,5 t dimensions (WxDxH) 2,7 x 2,3 x 4,25 m height above floor 4,0 mm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic drawing cushion in table, hydraulic cutting impact cushioning (4x Parallel holding cylinders), two-hand operation, hand lever operation

Condition: used, Year of construction: 2011, pressure 120 t distance between columns 430 mm stroke 125 mm distance table/ram, stroke up 400 mm table surface area 430 x 450 mm table height over floor 860 mm side window 230 mm ram surface 250 mm working speed 10 mm/s power requirement 11,0 kW weight 2,5 t dimensions (WxDxH) 1,6 x 1,3 x 2,4 m permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, moving screen, two-hand and foot operation No foundation pit necessary can be inspected in running condition in our warehouse Ncodpfx Ajvuuhtsdwjl

Condition: used, Year of construction: 2017, x-travel 5850 mm y-travel 2500 mm z-travel 1000 mm Control 840D sl feeds x- + y-axis 20 m/min feeds z-axis 20 m/min acceleration 5 m/qs spindle drive - main spindle 60 kW spindle turning speed - stepless 24.000 U/min max. torque on the working spindle 87 Nm tool taper HSK-A63/F80 c-axis +/- 360 grad a- axis +/- 100 grad tool changer 20 stück coolant tank 2300 l surface area 6.000*2.500 mm number of T-slots 18 flute distance 125 mm dimensions of the machine ca. 14,8x7,3x5,8 m Machine table Width 2,500 mm Length 6,000 mm Number of T-slots 20 Distance of T-slots 125 mm Dimensions of T-slots 18H8 mm Max. table load 8,000 kg Travels Cross rail: X axis 5,850 mm Cross slide: Y axis, horizontal 2,500 mm Z axis, vertical 1,000 mm Feeds X-, Y- and Z-axes Feed rate 20 m/min Rapid traverse rate 45 m/min Acceleration 5 m/s² Vertical Slide Cross section 560x420 mm Motor spindle Drive power S1 (100% ED) 60 kW Max. speed 24,000 rpm Max. torque 87 Nm Tool interface HSK-A63/F80 C-axis Nedpfxjycln De Adwjcl Swivel range ±360 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm A-axis Swivel range ±100 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm Total dimensions Length 14,800 mm Width 7,300 mm Height 5,800 mm

Condition: used, Year of construction: 1985, pressure 500 t distance between columns 3100 mm stroke fix 300 mm no. of strokes 20 - 70 Hub/min dayligth (stroke and adjustment up) 1000 mm column travel -side 1400 mm table surface area 2800 x 1600 mm ram surface 2800 x 1450 mm power requirement 90,0 kW weight of the machine ca. 100,00 t required space 5,75 x 3,2 x 7,8 m ram adjustment 100 mm height over floor 6,4 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation, stored in dismantled condition (no PLC + main motor available) Nodpevut N Aefx Adwscl

Condition: used, Year of construction: 1961, turning diameter Max. 4200 mm faceplate diameter 3700 mm turning height Max. 2600 mm workpiece weight Max. 35 t Power 80 PS DIGITAL CONTROL DISPLAY Largest diameter with the crossbeam supports: 4200mm Largest turning diameter with side support: 3900mm Largest turning height above faceplate: 2500 Side support 1 vertical grinding ram: 1200mm stroke (out of operation) 1 turning ram: 1400mm stroke Ncjdpsuddnvofx Adwol

Condition: used, Year of construction: 1972, Pressure 800 t distance between columns 3250 mm stroke 1100 mm Distance table/ram, stroke up 1900 mm Table surface area 3100 x 1900 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 300 mm Die cushion area in table 2500 x 1800 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 200 mm Die cushion area in ram 2200 x 1000 mm Ram surface 3100 x 1900 mm Side window 900 mm Oil volume 4700 l Nsdpfx Aevuuhyodwecl Power capacity 200,0 kW Dimensions (WxDxH) 4,95 x 3,3 x 10,2 m Height above floor 7,05 m with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available