Used Drum Dryer for sale (4,123)

Condition: like new (used), CATALOG NUMBER 7969 TECHNICAL SPECIFICATIONS - Motor power: 11kW - Tank capacity: 500l - Noise level: 70dB - Max pressure: 10 bar - Performance: 1500 l/min - Performance: 90 m3/h Kdjdpjy Dfydefx Aaysk - Voltage supply: 400 V / 50 Hz / 3 Ph - Dimensions (L/W/H): 1920x750x1600mm - Weight: approx. 420kg ADVANTAGES – Manufactured by the Polish company GUDEPOL – Screw compressor is equipped with a microprocessor control panel, informing the user about the compressor's operating mode – Not painted – Used machine – In excellent condition Net price: 16,900 PLN Net price: 4,030 EUR (at a rate of 4.2 PLN/EUR) (Prices may change with greater exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7924 TECHNICAL DATA hopper top opening (L/W): 500x600 mm hopper length: 2070 mm shaft width: 550 mm motor: 55 kW number of knives: 4 pcs outlet for shredded wood: rectangular 560/360 mm dimensions (L/W/H): 3950x1520x2820 mm weight approx.: 2500 kg – drum chipper – 4 knives on the shaft – additional built-in fan for chip discharge – condition: very good – used chipper Kedpfx Aasyug Ddoyjdk Net price: 23,900 PLN Net price: 5,690 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2025, functionality: fully functional, sheet thickness (max.): 5 mm, total length: 950 mm, total width: 850 mm, total height: 1,175 mm, overall weight: 80 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.1 kW (1.50 HP), power: 1.1 kW (1.50 HP), Equipment: documentation/manual, CENTRIFUGAL DRYER MACHINE METAL CENTRIFUGAL DRYER Technical Specifications: Dryer Body Material: 5 mm iron thickness, painted with acid-resistant paint. Diameter: 58 cm Height: 80 cm Drying Basket Material: 1.5 mm stainless steel thickness, electropolished. Diameter: 44 cm Height: 32 cm Basket Volume: 50 liters Speed: 3000 rpm Centrifugal Motor: Power: 1.1 kW 3000 rpm Drying Fan Material: Aluminum Cast Motor Power: 0.25 kW Speed: 3000 rpm Heater Power: 2 kW heating tube External Dimensions: L: 850 mm W: 850 mm H: 1175 mm Kdsdpfx Aasrkl Unoyjk

Condition: excellent (used), Year of construction: 2022, operating hours: 26,512 h, machine/vehicle number: 1267-3491416, Material No.: 1.2487.0 Equipment / Additional information: Kodpfx Aajyhprqeyjdk Max. working pressure PS: 13,00 bar Compressed air inlet temp. TS: 3 – 60 °C Ambient temperature: 3 – 50 °C Phases: 3 / Frequency: 50 Hz Voltage: 400 V Full load current: 17 A Full load current drive motor: 14 A Electrical diagram: STG-03000 00

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 4528, Part No.: 1.7917.3 Equipment / Additional information: Refrigerant: R134a Refrigerant charge: 0.28 kg Max. working pressure (refrigeration system): 18 bar Max. working pressure (air system): 16 bar Kdodpfxjymmacs Aayek Rated voltage / Phase / Frequency: 230V/1/50Hz Rated current: 2.0 A Ambient temperature: +5°C / +43°C WITH TANK EPC 440-250 Part No.: 1.5938.4 // S. No.: 1236 // Age: 2006

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, Equipment: CE marking, documentation/manual, emergency stop, ZDV Series - Circular Type Dryers For drying after deburring and polishing Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Kdedpfx Aajl Sm N Tjysk Dust absorbing system is available as an option. The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Condition: good (used), Year of construction: 1999, Refrigeration Dryer Manufacturer: KAESER Model: TE 121 Year of manufacture: 1999 Motor rated power: 2.1 kW Kodpfx Aaottwzbeyedk Maintenance carried out by Kaeser. 16426ä

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Used Atlas Copco FD310 refrigerated dryer 18.60 m³/min Kedpfx Aeym Ub Uoayjdk 14 bar Year of manufacture: 2011.

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: unexamined, Technical parameters: • Manufacturer: AUSTRIAN ENERGY • Type: Dual pressure drum boiler (1999) • HP steam flow: t/h 40.8 • LP steam flow: t/h 17.3 • HP steam parameters: bar/°C 52 / 425 • LP steam parameters: bar/°C 4.2 / 180 • Flue gas temperature at HRSG outlet: °C 80 • Flue gas stream to the stack: t/h 468, k Nm3/h 482 • Heat recovered by the steam and water cycle from flue gas in HRSG: MWt 45.9 • Maximum output of DH exchanger: MWt 8.0 • Operating hours: 76,000 hours Kedey D Hy Eopfx Aayedk The high- and low-pressure sections of the equipment and the drums (HP and LP) consist of 6 independent, transportable modules. The boiler wall insulation is partial and requires replacement.

Condition: excellent (used), Year of construction: 2005, MSM dryer (6-9) Model SD65, 2800W, with moisture regenerator, molecular sieves, with plastic intake, 2005 Kjdpfx Aaoyznz Sjyedk

Condition: used, functionality: fully functional, Feeding chute with rubber-lined coating Mixing drum with paddles, diameter approx. 1,600 mm, length approx. 4,000 mm Ksdpfx Aexrn Anjayodk large production capacity simple and robust design on 2-axle trailer

Condition: used, Year of construction: 2006, operating hours: 3,470 h, Equipment: all wheel drive, Bomag Combination Roller BW138 AC * BOMAG * Model BW 138 AC * All-wheel drive * Year of manufacture: 2006 * Operating hours: 3470 (according to meter reading) Kdsdpfey Ag Rzsx Aayek * Total weight: 4313 kg * Single seat * Powered by a 3-cylinder Deutz diesel engine, 34 kW / 46 HP * Drum width: 1340 mm, diameter: 800 mm, tire size: 235/75.16 * Wheelbase: 1800 mm * Overall dimensions (L x W x H): 2620 x 1500 x 2760 mm * ROPS (roll-over protection structure), narrow and wide edge cutter Further data and additional pictures available upon request. This description does not constitute a binding offer and may contain errors. No guarantee for the accuracy of all specifications. Please also visit our homepage.

Condition: used, Drum Screen for wood chips: - drum - sea container - with electric motor Kdsdpey Dp Eqefx Aayjk

Condition: good (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 10000311P0A008025, excellent condition Kedpjy Dfu Usfx Aayjdk

Condition: excellent (used), functionality: fully functional, power: 119 kW (161.79 HP), overall weight: 15,750 kg, Year of construction: 2007, machine/vehicle number: 107084705/9, excellent condition Kdsdpjy Dfq Nefx Aayok

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Kdsdpey Aurgsfx Aayek A total of four dryers of this model are available.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available. Kdsdpfjy At A Rex Aayjk

Condition: excellent (used), Year of construction: 2023, For sale is a JET drum sander 2244 equipped with a 1.8 HP motor and a maximum sanding width of 560 mm. The machine is in excellent condition and has been inspected and refurbished by our service team. Technical specifications: - Sanding width: 560 mm (1120 mm) Ksdpfx Aaeyzqtqeyedk - Sanding thickness: 0.8 – 102 mm - Infinitely variable feed rate: 0 – 3 m/min - With oscillation - Drum speed: 1450 rpm - Suction connection Ø 100 mm - Motor power: 1.8 HP / 230 V - Year of manufacture: 2023 / as new The machine is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: JET 2244, drum sander, cylinder, oscillation, sanding machine Reference: R-L0B6O

Condition: used, Year of construction: 1996, functionality: fully functional, overall weight: 1,750 kg, total width: 1,120 mm, total length: 3,750 mm, number of chambers: 1, Equipment: documentation/manual, For sale: a high-performance fluid bed dryer from the renowned manufacturer Buhler, model OTWG-280. This is a horizontally constructed machine designed for the continuous thermal processing of bulk and granular materials. With its sectional design, the machine can function both as a dryer and a cooler, making it an extremely versatile element of any production line. The machine utilizes the principle of fluidization. The process involves blowing hot (or cold) air through a perforated base holding the raw material. The air lifts the material particles, forming a so-called "fluidized bed." In this state, each particle is surrounded on all sides by the heating/cooling medium, providing: - Instant heat exchange (significantly faster than drum dryers) - Uniform drying with no risk of localized overheating - Gentle product handling – minimal risk of mechanical damage to raw materials Kdedpfey D Iiuox Aayjk We have two OTWG 280 units and one OTWG 90 unit available. The price for the OTWG 280 is listed in the advertisement. OTWG 90 price: 40,000 EUR.

Condition: used, Motan NS-D05-SR-2, granulate loader and dryer, Motan granulate feeder, used machine Manufacturer: Motan Type: NS-D05-ST-2 Overall dimensions: 750 x 750 x 2500 mm Year: 1990 Tank volume : ~280 liters Electrical data: 240 V; 2.4 kW; 10 A Kedpexlpv Nefx Aayodk - with granulate suction unit - with electric heating

Condition: ready for operation (used), Pneumatic Pump, Drum Pump, Tank Pump Lutz MD2XL, Used Equipment Manufacturer: Lutz Model: MD2XL Ksdpfx Aasvl Hxfjyjdk Drive Type: Pneumatic Suction Tube Length: 1170 mm Flow Rate: 1.5 m³/min Operating Pressure: 6 bar Power: 1000 W EX: Explosion-proof Lutz drum pumps and tank pumps are suitable for the safe and economical transfer and decanting of neutral, aggressive, non-flammable, and flammable, low-viscosity, or slightly viscous liquids. They are designed for use with clean or contaminated liquids in various sizes of mobile or stationary containers. No lubricant is used, ensuring the pumped liquid remains free of lubricant contamination High-resistance, high-quality carbon fiber shaft bearing Maintenance possible without special tools Seal-free (DL) pump modules are interchangeable Approved under the 2014/34/EU ATEX Directive, Category 1/2

Condition: excellent (used), Year of construction: 2020, Screw compressor, compressor, compressed air unit, compressed air dryer, refrigerated dryer, dryer, compressed air refrigerated dryer -Manufacturer: JUBA, compressor with dryer -Compressor: Type JB 1500WX4 - Flow rate: 520 l/min -Motor power: 6 kW -Pressure: 7 bar -Tank capacity: 160 l Kdsdpsxl Rxfjfx Aayjk -Year of manufacture: 2020 -Dryer: Type JB-10AC 0.5 kW -Drying capacity 1.5 m³/min -Individual components: see photos -Transport dimensions: 1320/820/H830 mm Total weight: 180 kg

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. Kdsdpfx Aasyb Rpdjysk The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: good (used), Year of construction: 2000, Tempering unit Overall dimensions: 600 x 700 x 1600 mm Weight: 157 kg Power 6kW Voltage: 230 V Refrigerant type: R134.6 Kjdpfxjgvddps Aayjdk

Condition: good (used), Year of construction: 1999, Compressed Air dyer Operating pressure: 13 - 18 bar Flow rate at 7 bar: 12,7 m^3/min Voltage: 400 V Weight: 660 kg Overall dimensions: 1050 x 1550 x 1500 mm Kdedpfx Aajg Nk Abeysk