Used Paddle Dryer for sale (1,779)

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Credpsx R D Efofx Aa Nob Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Year of construction: 1988, Manufacturer : Comber Model: Pharmadry PH 100 Year : 1988 Type : vacuum dryer   Maximum temperature: 99°C Material: 304 and 316 stainless steel (in contact with product). Classification: Atex EEx IIB T4   Main tank diameter : ø 500 mm Main tank depth: 700 mm Power: 4 HP Filter Cjdsx R Avispfx Aa Nsrb Pressurised receiver tank Tubular heat exchanger   Gaskets: new Paint: new Mechanical seal: As is, good condition

Condition: used, // Sold as is or reconditioned // Vacuum paddle dryer mixer Used for products such as powders/powdery substances. 316 stainless steel Tank diameter 1000 x 2000 Volume: 1100 litres Jacketed 86 litres / 1 bar - 120°C Heated agitator 235 litres / 1 bar - 120°C Agitation by 8 scraping blades Codpfx Aajx Rz Spe Nerb Loading via 400 diameter Discharge 350 diameter with guillotine valves ADF 15 kW motor Self-cleaning filter

Year of construction: 2002, condition: excellent (used), machine/vehicle number: Reg Nr. 976, Machine Name: Paddle dryer Used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 U/min Material: Stainless steel Driving force: 5,5 KW Credpeitcvusfx Aa Nsb Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: Stainless steel 1.4571 Gear box: Stirnradgetriebemotor Equipment: Double jacket, mechanical seal, shaft heater Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maier head HWR 225 Condition: Used very good Price: on request

Year of construction: 2002, condition: excellent (used), Parts in contact with the product are made of stainless steel 1.4571, the rest of the dryer is made of 1.4301. Machine Name: Continuous Horizontal Vacuum Paddler Dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Credpfxjitcu Ej Aa Njb Speed: 107 rpm Material: 1.4301 Driving force: 5,5 kW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Technical documentation: Yes Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). Codoq Nfuzspfx Aa Nsrb 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer Crsdpsq Igyvofx Aa Njb A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: good (used), functionality: fully functional, BM Mixer 1500L Twin Shaft Paddle Mixer All stainless-steel Body Mixer capacity: 1500 L Type: Twin shaft paddle mixer Dimension: 2,500 x 1,800 x 2,000 mm Consumption: 20 KW Voltage: 400 V Crodpfx Aajxxuays Nob Total Power: 25A, 50 Hz Phase: 3 Compressed air: 6-8 Bar/ ca.250l/min

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Cjdpfx Asd Sm Dioa Norb Max temperature: 700 C °

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Capacity: 4,200 l / min Credpfsyzaamex Aa Nob Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar

Condition: like new (used), Year of construction: 2021, Kaeser Secotec TE 142 Refrigeration Dryer YOM 2021 Serial number: 149-8393351 16 Bar 3-60 degrees C Refrigerant R513A Flow rate: 14.50 m3/min - 14500 l/min Total width: 712 mm Total length: 982 mm Total height: 1,612 mm Overall weight: 249 kg Cedpfsyy U I Nox Aa Nerb Kaeser compressed air dryers ensure dry, optimal compressed air for all flow rates. Built as high-quality industrial machines, they reliably protect your system and processes from condensation damage, even under extreme conditions.

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Cedpfx Aajy Iplfs Norb Ex Pharma Facility

Condition: excellent (used), Year of construction: 2004, operating hours: 1,14,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Cjdpfx Aaorp D Uxe Nsrb Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: used, Year of construction: 2017, functionality: fully functional, For sale: Fully operational and lightly used belt dryer from New eco-tec. Optionally available with air scrubber and 180m³ silo for dried goods. The plant was in operation until recently and is ready for immediate use. The system spans 2 containers and has a belt length of 24m, rated for 1.5MW thermal output. The belt dryer is entirely made of stainless steel inside the containers. Viewing by appointment. Csdpfoyr Aiqjx Aa Norb

Year of construction: 2013, condition: used, functionality: fully functional, B+B Anlagenbau TR 100/200-P-V – Mechanical Dryer – Good Condition – Dismantled in Working Order For sale: B+B Anlagenbau type TR 100/200-P-V. The machine is in good condition and was dismantled while fully operational. Technically sound; only normal wear parts show wear. Worn wear parts: Crjdoym Ag Eopfx Aa Njb - Screens - Screen support edges (mounting frames) - Sealing rubbers The paddles inside the machine are still in good condition. A large number of spare paddles are included in the sale. Main drive motor: 55 kW Additional loose parts included: - Spare drive motor - Main bearing (2x) - Fan housing - Pulley - Gearbox for screen scraper drive Please note: No spare screens are included. However, contact details of the supplier for the screens and screen support edges will be provided. Machine is available immediately.

Condition: used, Double Paddle Mixer Inside dimensions: 1000 mm x 750 mm x 650 mm Total dimensions: 1500 mm x 1040 mm x 1770 mm In good working condition Fully Stainless Steel Crsdpjym Ui Esfx Aa Nob

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW 8 Bar 1000 lts/min Very low running hours - 1351 run hours Complete with three filter set Crsdpfx Asxaxr Noa Neb

Condition: used, Year of construction: 2014, operating hours: 53,000 h, machine/vehicle number: APF 194907, pressure (max.): 7.5 bar, rotational speed (max.): 1,485 rpm, TECHNICAL DETAILS Maximum operating pressure: 7.5 bar Input power: 355 kW Shaft speed: 1,485 rpm MACHINE DETAILS Crsdpfx Aey Ia R Sea Njb Operating hours: 53,000 h EQUIPMENT Atlas Copco air dryer, model: MD1000 W CE Maximum operating pressure: 10.5 bar Year of manufacture: 2014

Condition: excellent (used), Year of construction: 2026, power: 4,180 kW (5,683.21 HP), input voltage: 220 V, input current: 750 A, input frequency: 50 Hz, type of input current: AC, temperature: 90 °C, total height: 180 mm, number of chambers: 48, number of shelf rows: 48, control type: PLC-controlled, actuation type: electric, fuel type: electric, year of last overhaul: 2026, Equipment: CE marking, We offer this very good YUKTIRAJ 2026 chamber dryer, year of manufacture 2026. Manufacturer: YUKTIRAJ Model: 2026 Year of manufacture: 2026 Condition: very good Category ID: 333 Crjdpfx Aajy Nk Azo Nob Type ID: 4328 Equipment type: chamber dryer If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2010, TA 5 compressed air refrigeration dryer, with a volume flow of up to 0.60 m³/min. Refrigerant: R134a Additional title: Compressed air dehumidifier Volume flow: 600 l/min. Overpressure: 16 bar Power: 0,29 kW Current: 2,0 A Cjdpfsw Tduwox Aa Njrb Voltage: 230 V Frequency: 50 Hz Position: free standing

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Used MTA DEIT165 refrigeration dryer Crsdjy Nkl Nepfx Aa Nob 16.50 m3/min 16 bar Year of manufacture 2016

Condition: good (used), Year of construction: 2002, machine/vehicle number: 2344, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 400 V, total length: 800 mm, total width: 600 mm, total height: 1,400 mm, overall weight: 100 kg, For sale is a hot air container dryer, model CKT 70, from the renowned manufacturer Werner Koch Maschinentechnik. This unit is specifically designed for the efficient drying of plastic granulates, and with a heating capacity of 6 kW, it delivers consistent performance to meet industrial requirements. Transport and loading can be arranged across Europe upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges are welcome! Machinery Trade PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Crsdpfx Aajy I Rpfe Nob Are you in need of a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your equipment? For more information or to get in touch, please visit our website.

Condition: like new (used), Year of construction: 2023, operating hours: 10,626 h, functionality: fully functional, Used Atlas Copco FD220VSD-G Refrigerated Dryer - Premium 13.20 m³/min 14 bar Year of manufacture: 2023 Operating hours: 10,626 Cjdpfxsy Iwtdj Aa Nerb

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Industrial conveyor dryer TESOMA DryTech designed for textile screen printing production lines. This conveyor dryer is suitable for drying inks in screen printing, textile printing and industrial printing applications. Technical specifications: Total length: 7.5 m Conveyor belt width: 900 mm Year of manufacture: approx. 2008 Electric heating system Heavy-duty industrial construction Csdpjympzisfx Aa Njrb Continuous conveyor drying system Technical condition: Conveyor belt running smoothly Heating elements working Fans operational Control panel active Machine tested confirmed working The machine is complete and ready for transport and installation. Video of the machine in operation is available upon request. Location: Poland Incoterms: EXW Poland International transport can be arranged.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Used Atlas Copco FX10 refrigerated dryer Crsdpfx Aaey Ip D Io Nsb 5.22 m³/min 13 bar Year of manufacture: 2015