Used Dry Car for sale (10,863)

Year of construction: 2014, condition: repair required (used), functionality: limited functionality, • Production freeze dryer, Parker Freeze Dry 5-945-135, custom model, made to order for client’s specification; CE-marked, 400V 50Hz three-phase power. Nominal condensercapacity 453kg of ice. • Dual phase vacuum pump cluster, Busch, RA0255 main pump (max. 25A 400V) + WV1500 Hjdsz Dz Rtepfx Akrenu booster pump (max. 20A 400V), serviced 2023, overhauled 2021. • Heat control system, programmable, West ProVU + 4 x 6100+ • Five product carts, 27 heated shelves and approx.100kg capacity each (max. 50A 400V). • 2 Full tray sets (2x135 pieces), 18x26 inch, aluminum. • Outdoor cooling unit, cooling + hot gas de-icing, compressor rebuilt and overhauled 2022/2025. Max power consumption 50A 400V. cooling face measurements 4.6mx2.4mx1.3m measurements of the carts 20cmx120cmx70cm

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18-4101, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), This machine is specifically designed to produce highly accurate two-layer herringbone flooring. Applicable joint types: - Left and right models with tongue and groove - Groove and groove models - easylox® models (patented connection system) Planks are picked up at the front and placed into the machine. Grippers take over the plank and guide it along the profiling cutters. Here, the profile is created, and the bevel, if any, is applied. Then, the planks are transferred to a second transport system, which places the plank in a position where the tongue/groove or groove/groove, or easylox® joint is applied. The machine is fully CNC-controlled and extremely precise. Squareness, length, bevel size, and fit are fully computer-controlled and can be adjusted with high accuracy. Smallest herringbone dimension: 90x450mm Largest herringbone dimension: 220x1200mm The machine consists of: Hedpfez Rkd Dex Akronu “Sigmatek” digital touchscreen control panel; stack infeed arm, plank infeed unit, milling carriage, end machining unit, transport clamps, fixed milling position, pocket milling units, stack output unit, plank output unit; capacity, minimum thickness 12 mm, maximum thickness 25 mm, working pressure compressed air 7 bar, milling carriage feed speed 6 - 14 m/min, milling cutter overhang Ø 210 mm / 250 mm, profiling cutter Ø 250 mm, bevel cutter Ø 250 mm, pocket cutter Ø 44 mm - 50 mm; combined power approximately 2kW, for producing left/right herringbone and easylox; including manuals, machine books, and flexible hoses up to the ceiling. Extremely precise, fully automatic machine!

Condition: excellent (used), Year of construction: 1990, the machine in perfect condition very good machine This is a combo machine pelletizer and sandblasting machine (two in one) very low operation hours Hnodshmi Ucepfx Akrou

Condition: new, Carbolite Gero AX30 Heating Cabinet *New price: €3385 The Apex AX series heating cabinets are economical laboratory devices for temperatures up to 250°C. * Digital PID controller R38 * Forced-air fan for short heating times and excellent temperature homogeneity * Stainless steel interior chamber * Two adjustable, chrome-plated shelves * Door with locking function and airtight silicone seal * Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature: 250°C Minimum temperature: RT + 30°C Volume (liters): 28 Temperature homogeneity (°C): ±5.0 @ 250°C Heating time (min): 23 Recovery time (min): 3 Dimensions: Internal H x W x D (mm): 295 x 300 x 320 External dimensions H x W x D (mm): 440 x 590 x 465 Load per shelf/total: 10/20 (kg) Hjdpfx Aeq Hdfnekrsnu Air changes per hour: 65 Max. power (W): 918 Holding power (W): 342 Weight (kg): 24 Item condition: new, without original packaging More Carbolite Gero AX heating cabinets can be found in our shop! International shipping costs available upon request!

Condition: new, Carbolite Gero AX30 Heating Cabinet *New price: €3185 The Apex AX series heating cabinets are economical laboratory devices for temperatures up to 250°C. * Forced-air fan for short heating times and excellent temperature homogeneity * Stainless steel inner chamber * Two height-adjustable, chrome-plated shelves * Door with locking function and airtight silicone seal * Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature: 250°C Minimum temperature: RT + 30°C Volume (liters): 28 Temperature homogeneity (°C): ±5.0 @ 250°C Heating time (min): 23 Recovery time (min): 3 Dimensions: Internal H x W x D (mm): 295 x 300 x 320 External dimensions H x W x D (mm): 440 x 590 x 465 Hodpjq Hdfkjfx Akronu Load per shelf/total: 10/20 (kg) Air exchange per hour: 65 Max. power (W): 918 Holding power (W): 342 Weight (kg): 24 Item condition: new, without original packaging You can find more Carbolite Gero AX heating cabinets in our shop! International shipping costs available upon request!

Year of construction: 2007, condition: good (used), fuel type: electric, Golf car CLUBCAR PRECEDENT, 4-seater golf cart, 2007, with charger. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Hodpfx Aoz Rvftokrsnu

Year of construction: 2007, condition: good (used), fuel type: electric, Golf car CLUBCAR PRECEDENT, 4-seater golf cart, 2007, with charger. A video can be sent via WhatsApp. We have a continuous stock; see our website. Hnodpfsz Rvfyex Akrsu Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: new, Year of construction: 2022, total length: 2,800 mm, Tugger Club Car Club Car Hsdpfx Ajxpx Trskrjnu Drive Electric Year built 2022

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 1,010 mm, total width: 1,010 mm, total height: 2,010 mm, mesh size: 10 mm, Equipment: CE marking, Own production smoke trolleys, Lithuania currently offers 4 complete sets of drying trolleys with trays available from stock. Were used as a demonstration model in the showroom. Can be sent one set at a time. New price 3500 EUR per set Full manufacturer warranty is provided by HySpriz. This is an ideal trolley solution for drying products such as jerky, kabanos, fish snacks, and pet sticks. It is also suitable for fish defrosting processes and even baking applications. The mesh structure ensures excellent air convection through all product levels, resulting in uniform drying and stable product quality. We manufacture in Ukraine a heavy-duty stainless steel drying trolley, specifically designed for industrial and semi-industrial production of meat and fish snacks, raw-cured sausages, jerky, and pet treats. The trolley is fully compatible with RK50U, SAS200, and FARS200 systems and is ideal for use in drying chambers, smokehouses, and climate-controlled environments with air dehumidification. The external dimensions of the trolley are 2000 × 1010 × 1010 mm. The frame is made of corrosion-resistant AISI 304 stainless steel using a robust 40 × 40 × 1.3 mm profile. It includes 30 levels with a 55 mm spacing between tiers and special locking systems to prevent trays from falling during movement. For mobility, the trolley is equipped with six heavy-duty pendulum swivel casters (Ø125 mm), allowing full rotation even when loaded. Hedpfx Aerftxfskrenu Each trolley includes 60 stainless steel trays sized 900 × 500 mm. The trays are made of corrugated stainless steel mesh, 5x5 mm. can be optionally equipped with Teflon liners (5,8 EUR/pcs) Wire thickness is 0.7 mm for high rigidity. Each tray has a 15 mm perimeter rim for improved airflow and heat distribution. Reusable non-stick Teflon inserts are included, ideal for sticky or soft products. Total load capacity is up to 400 kg per trolley, with up to 7 kg per tray. The system supports both low-temperature dehydration and high-temperature processing. Compatible with chambers using horizontal or vertical airflow. Designed for easy cleaning, hygiene, and long service life. This trolley ensures efficient moisture removal and uniform air distribution, which directly improves drying performance and final product shelf life.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New unit, in stock, immediately available -Volume 18,000 liters -Maximum temperature 350°C -Internal dimensions L x W x H 4100 x 2100 x 2100 mm -External dimensions (with rails) L 9970 x W 3060 x H (with lift-up door) 6110 mm -Control system Eurotherm Nanodac -Temperature stability (at rated temperature without load) ±5°C -Automatic inlet and outlet air dampers -Electric lift-up door -Electrically driven hearth carriage -Power 247 ± 9% kW -400 V, 50 Hz -Documentation, CE declaration Hnedpfju Hma Nex Akrou We would be pleased to offer installation and commissioning, as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enamelling furnace, drying oven, industrial furnace, heating chamber, heating oven, temperature oven, drying cabinet, chamber furnace, large-volume furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New machine, immediately available, 12 months warranty -Internal dimensions (w x d x h): 1250 x 4000 x 1450 mm -External dimensions (w x d x h): 1900 x 4900 x 2500 mm -Power consumption: 240 kW -Current consumption: 350 Amperes -Maximum temperature: 1300 °C -Oven weight (approx.): 6000 kg -Control system: JUMO IMAGO 500 -Software packages: (OPCA & PCC) -Display unit: JUMO Logoscreen 601 -Includes: feedthrough hole and 6 additional slots for recording type K customer thermocouples -Multi-zone design (3 zones) -Switchgear with solid-state relays -Climate control for the switchgear -Automatic inlet and outlet dampers -Controlled cooling system (including frequency converter, controlled via the control system) -Electrically driven furnace car -Maximum load: 3.5 tons -Swinging door Hnedpfoy Avmljx Akreu -Documentation, CE declaration We would be happy to offer installation, commissioning, and training for your employees. Please contact us! We stock new and used industrial furnaces. Inspections in our warehouse are possible upon request. Furnace car oven, car hearth oven, furnaces, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, oven, stress-relieving furnace, enamelling furnace, drying oven, industrial furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln

Condition: like new (used), Year of construction: 2009, operating hours: 467 h, functionality: fully functional, Plow and play. Very low-hours, fully equipped mobile dry ice production plant: Total operating time for the pelletizer is 467 hours. Hodpey R I Tmefx Akrjnu The last full service was performed in 2026. Pelletizer * Mobile, containerized manufacturing system * "Production HUB with Triventek PE80 pelletizer, 80 kg/h" (Denmark), built into a portable container with lighting. * ISO CO2 tank, 8 m3, portable on a frame, manufacturer: Wessington Cryogenics Ltd, England. * 3 pieces of thermo containers, 200 kg capacity each. New price: €250,000 * All manufactured in 2009, but very little used. Mobile & Modular: Built directly into a 10-foot High Cube ISO shipping container, it can be easily transported to rugged or remote locations. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, color: blue, loading space width: 2,470 mm, loading space length: 7,300 mm, loading space height: 2,525 mm, first registration: 01/2025, Krone container chassis with dry box, model WK 7.3 STG. Dimensions: L x W x H: 7,300 x 2,470 x 2,525 mm. Features: Portal doors, 3 recessed rod lashing rails per side, wooden lining. Sale exclusively to commercial businesses; all warranties are excluded. Subject to errors and prior sale. Hedpoz D Evmjfx Akronu

Condition: used, functionality: fully functional, Price with dismantling. Drysorter with control system Mitsubishi A2. Drysorter capacity 80 pc/min after rebuild 2021 new control system Siemens S7 1500, ABB580 frequency converters and Finscan 2019 automatic sorter. Drysorter equipped with Dynagrade 2015 (updated 2020). Hnodeyzhvvepfx Akrsu

Condition: new, Year of construction: 2024, functionality: fully functional, Brand new machine never used, selling at very low price. Hjdpjwcfvpefx Akrsnu

Condition: ready for operation (used), Year of construction: 2019, operating hours: 30,745 h, functionality: fully functional, overall weight: 2,700 kg, power: 388 kW (527.53 HP), type of input current: three-phase, number of chambers: 3, Equipment: documentation/manual, We offer this ready-to-use Lauber L-ENZ 370 drying system, manufactured in 2019. – professional wood dryer, 388 kW + 3 drying containers Technology from the German manufacturer LAUBER Trocknungstechnik, manufactured in 2019, serial number 41199. The equipment is suitable for utilizing excess heat from a boiler, biogas plant, cogeneration unit, biomass boiler, or other heat source. Technical parameters: - Manufacturer: LAUBER Trocknungstechnik - Type: L-ENZ 370-4 - Serial number: 41199 - Year of manufacture: 2019 - Thermal output: approx. 388 kW - Fan: 11 kW - Power supply: 400/230 V, 3~NPE, 50 Hz - Automatic LAUBER control - Touchscreen control panel - Fan frequency inverter - Circulation pump control - Heat exchanger - WILO circulation pump - Complete electrical installation and switchgear - Complete technical documentation The technical documentation states a thermal output of 388 kW, operating temperatures of 90/65 °C for the heating water, and a water flow rate of 15.2 m³/h. The weight of the unit itself is approximately 2,700 kg. Zeichnung_LENZ_370_4_mit_techni… Drying containers The offer includes: 3 × drying container - Volume of one container: 15 m³ - Total capacity: 45 m³ - The containers are designed for drying material using the LAUBER hot-air system. Suitable applications: The technology is particularly suitable for: - 🌲 firewood - 🌲 wood chips - 🌲 wood biomass - 🌲 sawdust - 🌲 other loose wood materials - or other materials depending on the specific drying technology The LAUBER system uses warm air, which is blown through the material being dried in the containers. The manufacturer uses it for drying wood chips, firewood, and other loose materials. lauber-holztrockner.de Dimensions of the main unit Approximately: 4,630 × 2,390 × 2,750 mm Weight approx. 2,700 kg. Hedpez I Threfx Akronu Condition: The technology is unused and offered for sale. Complete technical documentation is available, including electrical diagrams, technical drawings, and the manufacturer's documentation. Condition: ready to use Type: drying system If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: like new (used), Year of construction: 2020, operating hours: 635 h, functionality: fully functional, Turn and loosen digestate, silage maize and compost in a drying container so moisture escapes evenly and the volume drops sharply, even with heavy, poorly flowing material. This MULTIMIX HD screw mixer from Martin Energietechnik is the heavy-duty version, built for separated digestate that the standard model cannot handle. Built 10/2020, approx. 635 operating hours, as-new condition. Checked, serviced and ready for use by us. All 5 screws are in good condition. Hodpfez Rv Tdsx Akronu Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Pickup and transport (750 kg gross) have to be scheduled. Best for: biogas plants and farms that dry digestate, silage maize or compost in containers. Not suitable for: drying containers with dimensions other than those listed below. Fits drying containers with: • Length 6500 mm • Inner width 2314 mm • Inner height 2090 mm • Round-tube track D = 89 mm What the equipment means in practice: 4.4 kW drive motor with heavy-duty chains: strong drive for heavy material, and the automatic chain tensioner keeps the chain tight by itself 5 conical special screws for silage maize and digestate: matched to a container height of 2090 mm Travel drive with 4 driven wheels: the unit moves along the track on its own PLC control with manual and automatic mode: set the pause time of the reversing cycle steplessly, then let it run Trailing cable approx. 10 m with CEE 16 A plug, 5-pole: connects to standard three-phase power Complete package: base unit with 4.4 kW motor, chain drive with automatic tensioner, 4-hole flange for the screws, 5 conical special screws, travel drive, control cabinet with PLC (safety functions, manual/automatic mode) and connection cable to the unit. The machine in detail: compared with the standard model, the HD version has, according to the manufacturer, a wider base frame, special screws, higher drive power and a reinforced drive train. Technical data: Martin Energietechnik, MULTIMIX HD, built 10/2020, approx. 635 h, 4.4 kW, CEE 16 A 5-pole, gross/net weight 750 kg / 695 kg, customs tariff no. 8479.8220, country of origin Germany. Condition: as new, usual cosmetic signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: CHF 15,000. Why you can buy with confidence: built 10/2020, approx. 635 operating hours, checked and serviced by us, all 5 screws in good condition, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the machine is what this listing says it is, complete and functional when you see it. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: this is a single used machine, not ongoing stock. Once sold, this exact configuration is gone. First-buyer bonus: buy by October 27, 2026 and receive CHF 1,000 off, so CHF 14,000 instead of CHF 15,000. Valid until October 27, 2026, or until the machine is sold. Action: send us your intended application, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Hedpjzxgglofx Akronu Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: used, Year of construction: 2017, input voltage: 400 V, input frequency: 50 Hz, input current: 38 A, power: 26.7 kW (36.30 HP), We are offering this used Hobart 305GH dry steam convection oven / rapid steam oven, manufactured in 2017. Model: 305GH Serial number: 970221933 Rated voltage: 400 V Frequency: 50/60 Hz Phases: 3+N Connection power: 26.7 kW Current: 38.7 A Water inlet pressure: 1.7 - 10.0 bar Operating pressure: 1.0 bar Hodpoz Riwcefx Akrsnu Protection class: IP33 ML number: 305GH-31 Year of manufacture: 2017 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2003, operating hours: 12,000 h, functionality: fully functional, ASCO BP407 – Automatic dry ice production machine for blocks, slices, and pellets Year of manufacture 2003 | 12,635 operating hours | Fully functional | Includes documentation and maintenance history For sale at DrDryice: an ASCO BP407 automatic dry ice production machine for the production of dry ice blocks, slices, and pellets. The machine is used, fully functional, and in good working order. The machine can produce slices in various thicknesses and pellets of 3 mm and 16 mm. The molds for the different product formats are integrated and are selected via the touchscreen. Manually changing the molds is therefore not necessary. Stated production capacity: up to approximately 400 kg per hour, depending on the chosen end product, block thickness, or pellet size. The previous user reported an actual production of 250–300 kg per hour. These are the capacity figures from the existing advertisement; the actual production depends on the operating conditions and product settings. maschinensucher.at Maintenance and operating hours The last maintenance service by ASCO was performed in December 2016, with a meter reading of 12,032 hours. After this maintenance service, the machine has only operated for another 603 hours. Hedjy R I Uqopfx Akrsnu Total operating hours: 12,032 + 603 = 12,635 hours. The pump and cylinder have been replaced in the past. Documentation is available with the machine, including technical manuals and service reports. Used Machines The machine is offered with the available maintenance history and associated additional parts and spare parts. Origin and reason for sale The machine comes from a large industrial factory that has invested in a new production line and has switched to a different machine manufacturer. Due to this change in the production setup, the ASCO BP407 has been taken out of production and is now available for sale. This is a used, fully functional machine. Worldwide Shipping Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning

Condition: used, Year of construction: 2020, total length: 2,100 mm, Tugger Club Car Tempo Drive Electric Hnodpfjxpx Txjx Akrou Year built 2020

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, Glastronic-made 1600mm vertical glass washing and drying machine. The machine is in a well-maintained and inspected condition, ready for immediate use. New squeegee rubbers, new bearings. Working direction: left to right. Maximum washable glass height: 1600mm. Number of brushes: 4. Hnodpfx Akez Ngyrorsu Drying fan. Stainless steel cabin. Water heating. Backlighting. Stop sensor. The machine has been fully inspected, cleaned, and is in perfect working order and can be viewed at our facility!

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 - Year built: 03/2026 - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Hsdpfx Akjz I Dziorenu Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets. New price currently around €250,000. Description: Complete system for dosing and packaging dry ice pellets. Fully automated process with high capacity and reliability. Advantages: Hjdpjw Ttxfefx Akrsnu Additional information about the bagging machine. System Dimensions: The entire system is 6 meters long, 3.20 meters high, and approximately 1.20 meters wide. The round turntable (disc) has a diameter of 1.5 meters. The system does not need to be installed in a completely straight line. The system can be rotated 90 degrees in two sections, creating a U-shape. This allows the machine to be installed in smaller spaces without affecting its operation. The height of the system is not adjustable. Machine Output: The machine has a capacity of approximately 500 kg per hour. Dimensions and Weight of the Bags: The bag sizes can be fully adjusted to your needs. This ranges from small bags of approximately 750 grams to larger bags of 20 kg. This can be flexibly adjusted to meet your production needs. Maintenance Costs: The average annual maintenance cost, excluding materials and call-out charges, is between €1200 and €1500 per year. Worldwide Shipping. Cold Jet Prime 600, Cold Jet Prime600, Cold Jet dry ice dosing & bagging system, dry ice dosing machine for sale, dry ice bagging machine for sale, dry ice production machine, dry ice production machine for sale, dry ice dosing and packaging system, automatic dry ice dosing machine, automatic dry ice bagging system, dry ice pellet production & packaging, dry ice packaging equipment, industrial dry ice production system, dry ice pellet production machine, dry ice pellet making equipment, dry ice pellet packing machine, pelletizer & bagging system, dry ice pelletizer bagger, cryogenic dry ice production equipment, CO2 dry ice production machine, dry ice manufacturing system, dry ice production & dosing system, used dry ice dosing machine, used dry ice production machine, refurbished dry ice machine, dry ice supply system, high-capacity dry ice production system, automatic CO2 pellet bagger, liquid CO2 to dry ice converter, dry ice bag filling machine, dry ice packaging automation system, industrial packaging machine for dry ice, high-output dry ice system, adjustable bag size dry ice, dry ice buffer tank system, 500 kg/h dry ice production, worldwide export dry ice machinery, industrial dry ice packaging, cold chain dry ice packaging equipment, food-grade dry ice packaging machine, logistics dry ice dosing & bagging, dry ice dosing & shipping solution, dry ice dosing system Netherlands, dry ice dosing system Noordwijkerhout, DrDryice, dry ice production equipment Europe, cryogenic pellet production systems, dry ice manufacturing equipment for sale, dry ice production line, dry ice pelletizer PR series, integrated dry ice dosing systems, industrial CO2 pellet production, dry ice automation system, dry ice bagging & dosing automation, high-reliability dry ice machine. DrDryice.

Condition: used, first registration: 01/2025, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, color: blue, Krone container body swap body, Dry Box WK 7.3 STG, dimensions: 7,300 x 2,470 x 2,525 mm. Features: portal doors, 3 recessed rod-type lashing rails per side. Sale exclusively to commercial businesses, with no warranty of any kind. Errors and prior sale are subject to change. Hedpfxjz Rpr Tj Akrenu