Used Dry Car for sale (10,893)

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 30.20 Dry splash wall Dimensions: 3000 x 2000 mm W X H Fan is built into the wall Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Nkjdpfx Asfr T Emsdwjt Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is built into the wall Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Njdpfx Aefr T Eqedwskt Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSE 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is installed above the wall + Fan in the height Air capacity: 7,200 m³ / h Motor: 0.75 kW explosion-proof (ATEX) Exhaust air pipe: 500 Ø mm Nkodofv Hiqopfx Adwot depth: 900 mm The pipeline should not exceed a total length of 3-4 meters. Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWc 20.20 Dry bulkhead Dimensions: 2000 x 2000 mm W X H + Fan in the height Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Nedjfn Ndcjpfx Adwjkt Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. Nkedpefn Nddofx Adwjt We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. T.S.W.C. 30.20 Dry bulkhead Dimensions: 3000 x 2000 mm W X H + Fan in the height Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: used, mileage: 5,84,000 km, power: 265 kW (360.30 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 8,150 mm, total width: 2,550 mm, loading space length: 8,150 mm, loading space width: 2,550 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, tail-lift, traction control, Year of manufacture: 2019 Suspension: air suspension Front axle: Steering; Tyre profile left: 40%; Tyre profile right: 40% Rear axle: Double wheels; Tyre profile left inner: 90%; Tyre profile left outer: 90%; Tyre profile right outer: 90%; Tyre profile right outer: 90% Empty weight: 9.735 kg Nkjdpfxoyaymis Adwjt Carrying capacity: 9.265 kg GVW: 19.000 kg New Galvanized Loading Platform Hydraulic Sliding Ramps 14 Lashing Eyes in Omega Floor Floor Height 110 cm

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: CryoMax Eco 17Y110-01, New (demo machine) purchased and used once at a customer site for a short demonstration! Nksdpfxsx Dkags Adwst

Condition: used, Manufacturer : Heraeus - Kendro Model: UT 6060 AR Type : Heat and forced air drying oven Temperature : 180°C Power : 1,64 kW Capacity : 54 L Inside dimensions : 403 x 340 x 380 mm Nkodpsx R A Tusfx Adwjt External dimensions : 744 x 535 x 552 mm Weight: 53kg

Condition: used, Year of construction: 1986, Manufacturer: Guedu Year : 1986 Type : Reactor dryer Engine : hydraulic Reactor volume: 280 L Shell circuit : Tank: 14.6 L / 0.9 m2 Bottom: 13.75 L / 0.55 m2 Corrosion allowance: 1 mm Test pressure (half shell): 12 bar Working pressure (half shell): 6 bar steam Nksdsx Rz Iqspfx Adwjt Test pressure (tank): 6 bar Working pressure (vessel): 3.99 bar gas and 10 torr vacuum Operating temperature: - 20°C + 160°C Welding coefficient : 0,7

Condition: new, axle configuration: > 3 axles, first registration: 09/2025, loading space length: 8,900 mm, loading space width: 2,540 mm, total length: 10,940 mm, total width: 2,540 mm, total height: 3,750 mm, suspension: air, tire size: 245/70-R17.5, Year of construction: 2025, = Additional Options and Accessories = - Forklift pockets = Remarks = Nkodpfx Ajyazbhodwot NEW and UNUSED MAXTRAILER MAX600-S-4-8.90-U 4-axle trailer with hydraulically operated and sliding ramps, 890cm loading platform with rear bevel, ABS/EBS, TPMS, BPW axles with drum brakes, air suspension with lift and lower valve, axle unit with drawbar approx. 1750mm and 50mm towing eye, coupling height 830-1010mm loaded, width indicator boards, warning beacon, 6 pairs of pipes for stanchions (approx. 100x50mm), tyres 245/70-R17.5 = Further Information = Axle Configuration Tyre size: 245/70-R17.5 Axle brand: BPW DRUM Brakes: Drum brakes Suspension: Air suspension Front axle 1: Dual tyres; Max. axle load: 10,700 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Front axle 2: Dual tyres; Max. axle load: 10,700 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 1: Dual tyres; Max. axle load: 10,700 kg; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 2: Dual tyres; Max. axle load: 10,700 kg; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Weights Unladen weight: 8,464 kg Payload: 34,336 kg GVW: 42,800 kg Functional Body brand: MAXTRAILER MAX600-S-4-8.90-U Loading platform height: 90 cm Condition Overall condition: very good Technical condition: very good Optical condition: very good Further Information Please contact Arne Honingh for more information.

Condition: new, empty load weight: 750 kg, maximum load weight: 2,250 kg, overall weight: 3,000 kg, loading space length: 5,400 mm, loading space width: 2,070 mm, tire size: 195/50r13c, Car transporter or multi-transporter from the manufacturer HULCO model CARAX-2 3000 540x207. As standard equipment, the Hulco car trailer has an aluminum floor, lashing eyes on the outside of the frame, loading ramps that can be inserted under the loading area, sloping rear, low chassis, stable welded steel frame, support wheel and a V-drawbar. We also offer accessories for Hulco car transport trailers such as high tarpaulin, wheel stoppers, rear support set, drawbar box, car lashing straps and locks. --- You can also find all of our cost-effective offers on our homepage Delivery throughout Germany (except islands) possible! Feel free to ask us about the prices. ---    Car trailer center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Nksdpfx Aeh Rlvdedwet Pick-up times: Monday - Friday – 9 a.m. 8 p.m.    Pick-up is not possible on Saturdays!

Condition: used, axle configuration: 1 axle, total length: 5,000 mm, total width: 2,000 mm, Carrying capacity: 4.000 kg VAT/margin: VAT qualifying Nkodpfx Adoyapr Iewot

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 6381/99, 2 connected kilns, timber volume, each 142m3 , total = 284 m3 concidering: - 50x100 boards, stacking factor 0.85 - each kiln 24 stacks 4.2x1.2x1.2m + 12 stacks 5.1x1.2x1.2m ; 1m free space in front and 1m behind the stacks, 0.15m between the stacks - inside dimensions of each kiln: width 15.2m (3 stacks), depth 7.3m (4 stacks), height 4.1m (3 stacks) - dimensions of loading door 15.2x4.1m , lifting-sliding type of 2 pcs. Inspection doors in rear walls. - loading system frontal forklift , 2 sliding trolleys for the loading door of lifting-sliding type Heating power 610,000 Kcal/h at 60'C inside temperature. Njdpfx Aswynniodwjkt Heating system: hot water, 90'C at inlet min, bi-metal pipes, stainless steel core with external aluminium fin, including the automatic valve for the hot water with intercept valves and stainless steel pipes till rear wall of dryers Rehumidification: cold water 3.5 bar, 150l/h. The spraying device by stainless steel pipe and changeable nozzles on brass. Number of fans each kiln, installed in long aluminium pipes (Nardi patent): 12 , reversible, 800mm, changed power motors 4.0/1.1kw, two speeds. Long pipes increase the air flow, reducing the pressure drop, saving energy. The horizontal aluminium baffles closing the free space over the stacks Number of vents each kiln: 8+8 cast aluminium vents Snow load 120 kg/m2, wind speed 100 km/h The electric switchboard cabinet per each kiln. Voltage: 400V , 50Hz . Type of control: LEONARDO 3000 (renewed in 2007) Each kiln has 12 wood moisture probes, 2 kiln temperature probes and 2 kiln relative moisture probes, 3 digital read outs of these values. Dismantling will be done by buyer. Seller provide a forklift if needed.

Condition: new, functionality: fully functional, machine/vehicle number: Typ-U6M_Angebot, empty load weight: 210 kg, maximum load weight: 540 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,500 mm, loading space height: 150 mm, suspension: other, Year of construction: 2026, Koch Trailer 150x250cm, 750kg, "Type U6M" Our best-selling unbraked Koch trailer Type U6M with a superstructure made entirely from anodized aluminium. Passenger car trailer Type U6M with loading dimensions of 150 x 250 x 25cm. Lightweight aluminium trailer with a permissible total weight of 750kg and a payload of 540kg, including a 10-year warranty. Koch Trailer Works has been manufacturing quality trailers "Made in Germany" for over 30 years. Features - 10-year warranty (unique) - Double-walled anodized aluminium side walls, 30mm (unique) - Side wall with load securing system in V2A stainless steel (unique) - 1 x 22/200 aluminium ramp, mounted laterally - Side wall assembly entirely with 8mm V2A stainless steel bolts (unique) - Jockey wheel included as standard - 2x M16 threaded tension anchors / sturdy threaded rods at the rear (unique) Nsdpoi R Hxksfx Adwekt Additional Equipment - 15mm anti-slip, water-resistant birch plywood platform (phenolic resin coated) - Axle and drawbar fully hot-dip galvanized by AL-KO - Large 185/70 R13 balanced tires, rated for up to 100 km/h - Steel mudguards bolted with 8mm stainless steel screws - 12-volt electrical system, 13-pin plug with reversing light - 2 rear supports as shown are available as an accessory for €102.00 Other Information - Registration certificate / Vehicle document Part II If you wish to purchase this trailer or have further questions regarding trailers, please use our internal enclosed trailer "Type-U6M_Offer" form.

Condition: new, functionality: fully functional, machine/vehicle number: 12622629, empty load weight: 730 kg, maximum load weight: 1,270 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,280 mm, loading space width: 1,670 mm, loading space height: 2,300 mm, suspension: other, Year of construction: 2026, Product information "Koch trailer with tarpaulin 150x300cm 1300kg|Type 7.13|High tarpaulin 160cm - Blue" Low loader trailer 150x300cm, 1300kg, "Type 7.13" high tarpaulin 160cm blue Type 7.13 car trailer with a loading dimension of 150 x 300 x 45cm. Lightweight aluminum trailer with a permissible total weight of 1300kg and a payload of 1020kg including a 10-year warranty. Koch-Anhängerwerke has been manufacturing quality trailers made in Germany for over 30 years. Special features double-walled anodized aluminium dropside 30mm (unique) Dropside with load securing system in V2A stainless steel (unique) Very sturdy tailgate locks made of V2A stainless steel (unique) Dropside bolting completely 8 mm V2A stainless steel (unique) Three-sided lashing gallery / railing (unique) 2x M16 threaded anchors / sturdy threaded rods at the rear (unique) 2 elaborate longitudinal beams High tarpaulin 160cm professional design can be opened at the front and rear Nkedpfxsi R Hxcj Adwjt Further equipment Easily removable tailgate Floor plate stable screen-printed floor, non-slip birch wood glued waterproof Axle and drawbar completely hot-dip galvanized Manufacturer ALKO Large 195 /70 R14 tires, balanced and 100 km/h approved Sheet steel mudguards bolted with 8 mm stainless steel screws 12 volt electrics, 13-pin plug with reversing light Other documents Vehicle registration certificate / registration certificate part 2 Various accessories available at extra cost! If you would like to buy this trailer or have further trailer queries, please use our internal car trailer "No. 2705".

Condition: new, functionality: fully functional, machine/vehicle number: 10200726, empty load weight: 410 kg, maximum load weight: 2,190 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 440 mm, Year of construction: 2026, Koch trailer 125x250cm, 750kg, "Type U4" with high tarpaulin 150cm Type U4 car trailer with a loading dimension of 125 x 250 x 150cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 570kg including a 10-year warranty. Koch-Anhängerwerke has been manufacturing quality trailers made in Germany for over 30 years. Special features Double-walled anodized aluminium dropside 30mm (unique) Dropside with load securing system in V2A stainless steel (unique) Very sturdy tailgate locks made of V2A stainless steel (unique) Dropside bolting completely 8 mm V2A stainless steel (unique) Four-sided lashing gallery / railing on lid (unique) 2x M16 threaded anchors / sturdy threaded rods at the rear (unique) Further equipment Easily removable tailgate Floor plate stable screen-printed floor, non-slip birch wood glued waterproof Axle and drawbar completely hot-dip galvanized Manufacturer ALKO Large 185/70 R13 tires, balanced and capable of 100 km/h Sheet steel mudguards bolted with 8 mm stainless steel screws Nkodpfxsi R Hw He Adwjt 12 volt electrics, 13-pin plug with reversing light High tarpaulin 150cm in gray Set of hooks mounted, hot-dip galvanized, also for net attachment Frame easily removable Other documents Vehicle registration certificate / registration certificate part 2 Accessories available at extra cost, see below. If you would like to buy this trailer or have further trailer queries, please use our internal box trailer "No. U4-HP150 offer".

Condition: new, functionality: fully functional, machine/vehicle number: 12312572, empty load weight: 690 kg, maximum load weight: 1,310 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,550 mm, loading space height: 300 mm, suspension: other, Year of construction: 2026, Loading dimensions approx. 1550 mm x 3050 mm External dimensions approx. 1670 mm x 4410 mm Permissible total weight: 2000 kg Payload: approx. 1340 kg (payload may vary depending on additional equipment) Nksdpfxji R Hwms Adwjt Manufacturer: Debon Features - Rear tipper "PW1.2 LUX" - Electric hydraulic pump (battery powered) - Charging contacts integrated in the frame profile (12V / suitable for chargers) - 6 lashing eyes on the loading floor - H-frame (installed / removable) - 300 mm aluminium side wall extension (foldable / removable) - 300 mm aluminium side walls (foldable / removable) - Vehicle documents included Additional equipment - Base plate: galvanized steel sheet on phenolic plywood - Wheel chocks + holders Chassis - Axle and drawbar completely hot-dip galvanized | Rubber suspension axle | V-drawbar with ball-type coupling | Automatic heavy-duty jockey wheel Electrics - 12 Volt | 13-pin plug | Fog lamp | Clearance lights If you wish to purchase this trailer or have further questions about trailers, please use our internal tipper trailer number "12312572".

Condition: new, functionality: fully functional, machine/vehicle number: 10000475, empty load weight: 180 kg, maximum load weight: 570 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,250 mm, loading space height: 440 mm, Year of construction: 2026, Low loader trailer 125x250cm, 750kg, "Type U4" Type U4 car trailer with a loading dimension of 125 x 250 x 45cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 570kg including a 10-year warranty. Koch-Anhängerwerke has been manufacturing quality trailers made in Germany for over 30 years. Special features Double-walled anodized aluminium dropside 30mm (unique) Dropside with load securing system in V2A stainless steel (unique) Nedpfx Adji R Hw Ajwekt Very sturdy tailgate locks made of V2A stainless steel (unique) Dropside bolting completely 8 mm V2A stainless steel (unique) Three-sided lashing gallery / railing (unique) 2x M16 threaded anchors / sturdy threaded rods at the rear (unique) Further equipment Support wheel Easily removable tailgate Floor plate stable screen-printed floor, non-slip birch wood glued waterproof Axle and drawbar completely hot-dip galvanized Manufacturer ALKO Large 185 /70 R13 tires, balanced and capable of 100 km/h Sheet steel mudguards bolted with 8 mm stainless steel screws 12 volt electrics, 13-pin plug with reversing light Other documents Vehicle registration certificate / registration certificate part 2 Various accessories available at extra cost! You would like to buy this trailer or have further trailer queries then please use our internal box trailer "Nr.10000475".

Condition: new, functionality: fully functional, machine/vehicle number: 10401475, empty load weight: 180 kg, maximum load weight: 570 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,250 mm, loading space height: 440 mm, Year of construction: 2026, Product information "Koch lid trailer 125x250cm height:65cm 750kg|Type U4" Nodpfoi R Hwxsx Adwskt Lid trailer 125x250cm, 750kg, "Type U4" Car trailer with lid type U4 with a loading dimension of 125 x 250 x 65cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 570kg including a 10-year warranty. Koch-Anhängerwerke has been manufacturing quality trailers made in Germany for over 30 years. Special features Double-walled anodized aluminium dropside 30mm (unique) Dropside with load securing system in V2A stainless steel (unique) Very sturdy tailgate locks made of V2A stainless steel (unique) Dropside bolting completely 8 mm V2A stainless steel (unique) Four-sided lashing gallery / railing on lid (unique) 2x M16 threaded anchors / sturdy threaded rods at the rear (unique) Further equipment Easily removable tailgate Floor plate stable screen-printed floor, non-slip birch wood glued waterproof Axle and drawbar completely hot-dip galvanized Manufacturer ALKO Large 185/70 R13 tires, balanced and capable of 100 km/h Sheet steel mudguards bolted with 8 mm stainless steel screws 12 volt electrics, 13-pin plug with reversing light All-aluminum cover with 8 mm V2a screw connection Sturdy V2a lid lock at the rear with discus lock 2 sturdy V2a stainless steel hinges at the front 2 gas springs for easy opening Cover easily removable Other documents Vehicle registration certificate / registration certificate part 2 If you would like to buy this trailer or have further trailer queries, please use our internal box trailer "No.10401475".

Condition: new, machine/vehicle number: 10000275, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,050 mm, loading space height: 440 mm, Year of construction: 2026, Passenger Car Trailer Type U2 with loading dimensions of 105 x 205 x 45 cm. Lightweight aluminum trailer with a permissible total weight of 750 kg and a payload of 620 kg, including a 10-year warranty. Koch-Anhängerwerke has been manufacturing quality trailers made in Germany for over 30 years. Features: - 10-year warranty (unique) - Double-walled anodized aluminum side panel, 30 mm thick (unique) - Side panel with cargo securing system in V2A stainless steel (unique) - Highly robust rear gate latches in V2A stainless steel (unique) - Complete sidewall fastening using 8 mm V2A stainless steel screws (unique) - Three-sided lashing rail / railing (unique) - 2x M16 threaded tension anchors / sturdy threaded rods at the rear (unique) Nsdpfx Asi R Hwfjdwjkt Additional equipment: - Support wheel - Easily removable tailgate - 12 mm anti-slip phenolic plywood base, waterproof bonded birch wood, highly durable - Axle and drawbar fully hot-dip galvanized, manufacturer ALKO - Large 185/70 R13 tires, balanced and rated for up to 100 km/h - Steel mudguards bolted with 8 mm stainless steel screws - 12-volt electrics, 13-pin plug with reversing light Miscellaneous: - Vehicle registration certificate (part II) - Various accessories available for an additional charge! If you would like to purchase this trailer or have further inquiries about trailers, please use our internal box trailer "No. 10000275".

Condition: new, empty load weight: 604 kg, maximum load weight: 2,096 kg, overall weight: 2,700 kg, axle configuration: 2 axles, permissible axle load (axle 1): 1,350 kg, permissible axle load (axle 2): 1,350 kg, loading space length: 4,052 mm, loading space width: 2,105 mm, total length: 5,556 mm, total width: 2,150 mm, suspension: other, tire size: 195/55 R10C, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2025, TEMARED Car Transport Trailer Type Carkeeper 4021/2 2.7 t -- Modernized design, latest version -- Available immediately! Financing possible! Delivery available for an extra charge! 2,700 kg gross weight, payload up to 2,096 kg, 100 km/h approval* Tilting platform, fully lined with phenolic plywood Brand new 2 years MOT upon initial registration, 2-year manufacturer's warranty Equipment: - Hot-dip galvanized welded steel frame - 18 mm phenolic plywood floor - Outer frame with lashing rail - 4 pairs of recessed lashing eyes in outer frame - Aluminium side panels, height 300 mm - Manual winch, 1135 kg - Platform tilting function via gas strut - Steel loading ramps stored under the platform, approx. 1300 mm x 300 mm - Loading angle: 6° - Maintenance-free, rubber-suspended KNOTT axles, 1350 kg each - 195/55 R10C tires on steel rims - Shock absorbers for 100 km/h approval - Plastic mudguards - Hot-dip galvanized V-drawbar - KNOTT overrun brake with reverse automatic function, handbrake - Automatic jockey wheel, 250 kg - 12V lighting system, 13-pin connector - Multi-function tail lights - Front marker lights - Side marker lights red (white at rear) - 2 wheel chocks with holders - Registration papers (vehicle registration document, COC) The above-mentioned equipment is included in the price. Dimensions: - Loading area: 4052 x 2105 mm (L x W) - Floor height: 530 mm - Overall length: 5556 mm Nkodpfx Adex U Tnkswot - Overall width: 2150 mm - Overall height: 830 mm - Gross vehicle weight: 2700 kg - Unladen weight: from 604 kg - Payload: up to 2096 kg (depending on equipment) - Axle load: 2x 1350 kg - Drawbar load: 150 kg Trailer available immediately. Delivery possible at extra cost! Financing on request. Visit us or call us. Offer price incl. 19% VAT. Viewing Monday to Friday 09:00 - 17:00 Saturday 09:00 – 12:00 Offer and additional information available upon request. Subject to change, errors, printing mistakes, and prior sale. Some images may show optional accessories. *Please observe legal regulations regarding weight and speed limits.

Condition: new, empty load weight: 604 kg, maximum load weight: 2,096 kg, overall weight: 2,700 kg, axle configuration: 2 axles, permissible axle load (axle 1): 1,350 kg, permissible axle load (axle 2): 1,350 kg, loading space length: 4,052 mm, loading space width: 2,105 mm, total length: 5,556 mm, total width: 2,150 mm, total height: 770 mm, suspension: other, tire size: 195/55 R10C, trailer brake: trailer braked, Year of construction: 2025, TEMARED Car Transport Trailer Type Carkeeper 4021/2 S 2.7 t -- Modernized design, latest version -- 2,700 kg gross vehicle weight, payload up to 2,096 kg, 100 km/h approval* Tilting platform, fully lined with phenolic resin coated plywood Brand new 2 years MOT at initial registration, 2-year manufacturer warranty Immediately available! Financing possible! Delivery available at extra cost! Equipment: - Hot-dip galvanized welded steel frame - Floor made of 18 mm phenolic resin coated plywood - Outer frame with lashing rail - 4 pairs of recessed lashing rings in the outer frame - Manual winch, 1,135 kg - Platform tilting function via gas struts Nedpfx Adjx U Tl Newskt - Steel loading ramps stored under the platform, approx. 1300 mm x 300 mm - Ramp load capacity up to 3 t per pair - Low approach angle of 6° - Maintenance-free rubber suspension KNOTT axles, 1,350 kg each - 195/55 R10C tires on steel rims - Shock absorbers for 100 km/h approval - Plastic mudguards - V-drawbar, hot-dip galvanized - KNOTT overrun brake with automatic reversing function, handbrake - Automatic jockey wheel, 250 kg - 12V lighting system, 13-pin plug - Multifunctional lights - Front position lights - 2 wheel chocks with holder - Registration documents (vehicle title, COC) All equipment mentioned above included in the price. Dimensions: Loading area: 4,052 x 2,105 mm (LxW) Floor height: 530 mm Overall length: 5,556 mm Overall width: 2,150 mm Overall height: 770 mm Gross weight: 2,700 kg Unladen weight: 604 kg Payload: up to 2,096 kg (depending on equipment) Axle load: 2 x 1,350 kg Nose weight: 150 kg Trailer immediately available. Delivery available at extra cost! Financing on request. Visit us or contact us in writing. Offer price incl. 19% VAT. Viewings Mon-Fri 09:00 - 17:00 Saturday 09:00 – 12:00. Offer and further information available on request. Subject to changes, errors, and prior sale. Photos may show optional accessories. *Please observe applicable regulations on weight and speed limits.

Condition: new, Year of construction: 2025, Spray cleaning system type SM11 solid designed parts cleaning system with basket drive by gear motor, made of stainless steel 1.4301, - 3-sided arranged nozzle system made of stainless steel incl. stainless steel flat and spot blasting nozzles - autom. steam exhaust fan - coarse filter (removable basket) in the return line - oil skimmer for bath maintenance - timer for washing time setting - electronic lid monitoring - stainless steel wash pump (fab. Ebara) - level sensors / dry run protection - drain nozzle with ball valve - basket diameter: 1.100 mm - useful height: 700 mm - max. loading weight: 250 kg - spraying pressure: 3 bar - tank capacity: 260 liters - heating: electrically adjustable (RT - 75°C) - Connected load (electrical): approx. 12,5 kW - plant dimensions (WxDxH): 1.500 x 1.600 x 2.500(h) mm Nksdpfx Adspm Ha Dswjt (with open lid)

Condition: new, Year of construction: 2025, Parts cleaning machine, spray cleaning system type L122 Nkodpfx Aof Dy Rwedwot automatically working hot water chamber washing machine with basket drive by means of gear motor, housing of the plant made of stainless steel 1.4301, - 2 pieces 3-sided arranged nozzle systems made of stainless steel with stainless steel flat spray nozzles, - 2 stainless steel wash pumps (Xylem/Lowara), - level control as dry run protection - 2 suction filters as pump protection - Oil skimmer for bath maintenance - basket diameter: 1.150 mm - useful height: 700 mm - max. loading weight: 300 kg - spray pressure: 2x 3 bar - tank volume: 270 litres - heating: electrically adjustable (RT - 60°C) - Connected load (electrical): approx. 11.5 kW - plant dimensions (WxDxH): 1.480 x 1.540 x 2.195(h) mm

Year of construction: 1990, operating hours: 23,710 h, condition: ready for operation (used), This dryer from Motan is in machine storage at Plastima Used Machinery. The dryer is from 1990 and is in good condition. Njdpfx Adsmgadpjwokt – Brand: Motan – Model: MDC 800 – Construction year: 1990 – Working hours: 23,710