Used Dts for sale (147)

Condition: used, functionality: fully functional, Complete screw conveyor made of stainless steel. Diameter: ø200mm Length: 4,800mm Fedpfszp U Acex Aatepl Manufacturer: DTS

Condition: excellent (used), functionality: fully functional, DTS Double Screw Blancher, Stainless Steel Brand: DTS Year of manufacture: 2004 Power supply: 400 V Technical specifications: - Steam-heated system - Operating pressure: 6 bar - Screw dimensions: approx. Ø 1200 x 5000 mm - Water capacity: 1x 4.41 m³ and 1x 3.39 m³ Discharge conveyor: - Steel, dimensions: 4800 x 500 mm Total footprint: 8500 x 4300 mm Machine without platform, stairs, or grating floor The DTS double screw blancher set is an advanced processing unit made entirely of stainless steel, designed for the thermal treatment and conveying of food raw materials, especially potatoes and root vegetables. Featuring a high-pressure (6 bar) steam heating system and large operational capacity, this set is ideally suited for blanching, steaming, or pre-processing in high-throughput production lines. The use of two independent, large-diameter screws ensures accurate retention time control for the product, resulting in consistent processing quality while minimizing the risk of mechanical damage to the raw material. Fsdpfx Aaeyku D Dotepl

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, year of last overhaul: 2026, We are offering this used Exile SPYDER II DTS 30 machine for CTS/computer-to-screen creation of printing stencils for screen printing. THE MACHINE WAS RECENTLY SERVICED AND THOROUGHLY OVERHAULED BY THE MANUFACTURER IN 04/2026: - NEW PRINT HEAD - HARDWARE AND SOFTWARE UPDATE (including a new board for controlling the print head) - REPLACEMENT OF SMALLER COMPONENTS (including a vacuum regulator) Despite being manufactured in 2021, this SPYDER II is technically up-to-date in terms of its most important components and delivers correspondingly very good and precise results. The print quality has improved significantly since this upgrade. In textile screen printing, we use it to expose halftone screens up to 60 LPI, but the machine also prints finer test files. Fjdsy Itr Aepfx Aatepl The reason for considering selling the machine at this time is the transition to a laser-to-screen device. Model: SPYDER II DTS 30 Serial number: 900-100560-MHM/120 Date of manufacture: 05/2021 Service and upgrade: 04/2026 If you have any questions or need more information, please send us a message or call us. We will gladly send videos and additional photos. An on-site inspection is possible at any time. PICK-UP ON SITE ONLY FLEXIBLE PAYMENT OPTIONS / INSTALLMENT PAYMENTS POSSIBLE

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 7.376.230.761, functionality: fully functional, operating hours: 2,216 h, pressing force: 400 t, stroke length: 365 mm, throat depth: 630 mm, controller model: Durma DT-15, working width: 4,050 mm, TECHNICAL DETAILS Press force: 400 t Max. working width: 4,050 mm Frame spacing: 3,400 mm Overhang: 630 mm Max. stroke: 365 mm Crowning system: CNC-controlled Ram holder: Quick-release system Tool holder type: European style MACHINE DETAILS Drive system: CNC Control system: Durma DT-15 Number of axes: 4 (Y1 + Y2 + X + R) Fodpfx Aszzbafjatspl Dimensions & Weight Dimensions (L x W x H): 5,750 x 2,110 x 3,640 mm Weight: 27,760 kg Transport packages: 1 Operating hours: 2,216 h EQUIPMENT Tools Finger guard CE marking CE certificate Documentation Tools

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Fpedpozwxz Eefx Aatsl Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: excellent (used), Blancher Pos. number: LTC00006401 Make: DTS Type: automatic direct steam heated full water screw blancher Model: 2004 Capacity: Ø = 800 mm x L = 3.660 mm Volume: ± 1.800 litre Input height: 1.650 mm Dimensions: L x W x H = 4.850 x 1.950 x 1.800 mm Frame: stainless steel Power supply: 400 Volt – 50 Hz – 3,0 kW Steam: 4 bar Features: stainless steel landing overflow sieve with collection tank for blanched water including steam injection temperature controlled with circulation pump mechanical motor gearbox This is linked with Fpedpfjhbvmusx Aatjl Cooler Pos. number: LTC00006331 Make: Lubot / Wakker Type: automatic screw cooler Model: 2004 Capacity: Ø = 500 mm x L = 3.000 mm Volume: ± 600 litre Output: 850 mm Dimensions: L x W x H = 3900 x 1000 x 1800 mm Frame: stainless steel Power supply: 400 Volt – 50 Hz – 0,55 kW Features: mechanical variator as-is or tested and set to customer needs

Condition: used, Year of construction: 1992, table diameter 600 mm table load 250 Kg swivelling range 0 - 135 Grad turning speeds 0,03 - 2,0 U/min connected load frequency 400 V weight 0,4 t Dimensions (LxWxH) 1,1 x 0,9 x 1,0 m Welding turntable including: - Foot switch Fpsdpfx Ajygxzroatel - Wired remote control - 315mm chuck

Condition: ready for operation (used), Year of construction: 2006, operating hours: 1,11,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: 16i-MB, total height: 3,300 mm, table width: 2,700 mm, overall weight: 9,000 kg, spindle speed (max.): 12,000 rpm, product length (max.): 3,700 mm, number of axes: 5, This 5-axis STAMA MC 734M was manufactured in 2006. It features a travel range of 800 mm in the X-axis, 520 mm in the Y-axis, and 510 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 48 + 90 tools. If you are looking to get high-quality machining capabilities, consider the STAMA MC 734M vertical machining centre we have for sale. Contact us for further details. - Interference Radius: 252 mm- Connected Load: 51 kVA- Total Power Requirement: 46 kW- Connection Voltage: 400 V3 50 Hz- Nominal Current: 75 A- Additional Fuse: 3x 80 A- Min Cross Section Connection: 4x25 mm²- Spindle Taper: Capto 6- Spindle Bearing Diameter: 85 mm- Max Spindle Torque: 142 Nm (S6/20%)- Tool Magazine Capacity: 48 + 90 tools- Tool Clamping Force: 8,000 N- Max Tool Diameter: 160 mm- Max Tool Length: 300 mm- Feed Rate X / Y / Z: 1 - 10,000 mm/min- Rapid Traverse X / Y / Z: 60 m/min- Max Feed Force X / Y: 7,000 N- Max Feed Force Z: 8,000 N- Max Milling Capacity: 600 cm³- Max Drilling Diameter: 40 mm- Max Tapping Diameter: M30- Main Spindle Motor 1: Kessler DMQ .4.AFS/F (22.0 kW, 12,000 rpm)- X-Axis Motor: Fanuc A 06 B-0269-B 100 (5.5 kW, 3,000 rpm)- Y-Axis Motor: Fanuc A 06 B-0266-B 100 (4.5 kW, 3,000 rpm)- Z-Axis Motor: Fanuc A 06 B-0273-B 400 (5.5 kW, 3,000 rpm)- Tool Magazine Motor: Fanuc A 06 B-0235-B 000 (2.5 kW, 4,000 rpm)- 4th Axis B Motor: Fanuc A 06 B-0266-B 100 (4.5 kW, 3,000 rpm)- 5th Axis C Motor: Fanuc A 06 B-0236-B 100 (2.3 kW, 4,000 rpm)- 8th Axis X2 Motor: Fanuc A 06 B-0266-B 100 (4.5 kW, 3,000 rpm)- 7th Axis U Motor: Fanuc A 06 B-0213-B 400 (0.75 kW, 4,000 rpm)- V-Axis Motor: Fanuc A 06 B-0216-B 400 (1.0 kW, 4,000 rpm)- Supplementary Magazine Motor: Fanuc A 06 B-216-B 400 (1.0 kW, 4,000 rpm)- Flat Magazine Motor: Fanuc A 06 B-0235-B 100 (2.5 kW, 4,000 rpm)- Coolant Pump 1: Brinkmann BFS 238/70 (5.0 kW, 2,900 rpm)- Coolant Pump 2: Brinkmann TH 90/470-540 (3.3 kW, 2,900 rpm)- Dirty Water Pump: Brinkmann TAS 603/280-6156 (5.5 kW, 2,900 rpm)- Wash Gun Pump: Brinkmann TH 90/470-540 (3.3 kW, 2,900 rpm)- Self-cleaning Lamella Filter Motor: Motovario P 63 B 4 (0.18 kW, 1,360 rpm)- Chip Conveyor Motor: Bauer BS 06-74V/D 05 LA4/SP (0.25 kW, 1,350 rpm)- Hydraulic Unit Motor: Rexroth UPE5-4.00A10V5010ANT-H-1-025 (4.0 kW, 1,390 rpm)- Cabin Extraction Motor: Ziehl-Abegg RH 31 M-20K.5H.2R (0.75 kW, 2,880 rpm)- Conveyor Belt Motor: SEW-Eurodrive R 47 DT 7104/AS B1 (290 Nm, 1,380 rpm) Included Equipment: Chip conveyor, auxiliary magazine, coolant system, workpiece loader Fedpfx Aszzxa Nsatspl Technical Specification Through-spindle Coolant Yes

Condition: used, empty load weight: 6,520 kg, maximum load weight: 23,480 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 8,610 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length drop deck approx. 6.50 m, loading area length total approx. 8.60 m, loading height approx. 900 mm, , Vehicle is offered on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Fodpfxjzzalms Aatepl

Condition: new, Year of construction: 2021, lifting height: 6,000 mm, load capacity: 10,000 kg, We offer this new, unused Delta SG.0.DTS.10002 chain hoist, year of manufacture 2021. List price: €15,000.00 Manufacturer: Delta Model: SG.0.DTS.10002 Year: 2021 Condition: new Lifting capacity: 10.0 t Fjdoy N Tpdjpfx Aatepl If you have any questions or need further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 10,500 W, spindle speed (max.): 10,000 rpm, overall weight: 2,400 kg, total width: 1,300 mm, total height: 1,720 mm, bar diameter (max.): 25 mm, controller manufacturer: FANUC, controller model: Series 0i-TF Plus, product length (max.): 2,166 mm, number of axes: 5, This 5-axis TORNOS Swiss DT 26 S was manufactured in 2022. It features a maximum bar capacity of 25.4 mm and a main spindle speed of 10,000 rpm. The machine includes a total tool capacity of up to 22 tools and live tool positions of up to 8. If you are looking to get high-quality turning capabilities, consider the TORNOS Swiss DT 26 S swiss type turning machine we have for sale. Contact us for further details. • Max bar capacity: 25.4 mm (up to 26 mm depending on collets) • Main spindle (Z1): 10,000 rpm; 8.2 kW nominal / 10.5 kW peak; 26 Nm; liquid-cooled • Counter-spindle (X4/Z4): 10,000 rpm; 1.5 kW nominal / 2.2 kW peak • Linear axes: 5 (X1, Y1, Z1, X4, Z4) • C-axes: 2 (C1 on main spindle, C4 on counter-spindle) • Operation mode: With or without guide bush (direct drive guide bush) • Total tool capacity: up to 22 tools • Live (driven) tool positions: up to 8 • Electrical connection: 400 V, 3-phase, 50/60 Hz • Installed power: 24 kVA • Nominal current: 35 A • Fuse rating: 50 A • Auxiliary voltage: 24 V DC • Control voltage: 220 V Additional equipment Fsdezl A Sdopfx Aatopl • Bar feeder: Tornos Robobar SBF 326 • Bar diameter range: 3–26 mm • Guidance: Hydrodynamic oil-filled guide channels • Interface: Delta HMI touch screen independent control panel • Quick change: Tool-less replacement of pusher and guide bushings • Chip conveyor: Ring Sun RSCW50 • Model: RSCW50; Serial: TA39614110 • Motor power: 0.2 kW • Operating voltage: 400 V, 50/60 Hz • Weight: 313 kg • YOM: 2022-06 • Mist extraction/filtration: Micronfilter Kube Series oil mist collector (mounted on top-left bracket system) Technical Specification Counter Spindle Yes

Condition: used, Year of construction: 2010, machine/vehicle number: IntNr231656, HAAS DT-1 CNC machining center – manufactured in 2010 For sale is a HAAS DT-1 CNC machining center, manufactured in 2010, equipped with a 3+2-axis system, a Renishaw measuring probe, and a KUKA KR 5 sixx R850 WP. Technical data Manufacturer: Haas Model: DT-1 Year of manufacture: 2010 Machining: 3+2-axis Cycle time: 4,962 h Feed time: 3,079 h CNC control: Haas Chip conveyor: Integrated screw conveyor system Measuring probe: Renishaw Internal cooling (IKZ): present, currently defective Automation – KUKA KR 5 sixx R850 WP, control panel currently defective Fpsdpfx Aozwk Iweatjl Dimensions of the robot cell Height: approx. 2,100 mm Width: approx. 1,150 mm Depth: approx. 800 mm Dimensions including infeed and outfeed Height: approx. 2,100 mm Width: approx. 1,150 mm Depth: approx. 2,400 mm The machine can be inspected on-site by appointment. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: used, Year of construction: 2016, The DT-250 series is a hot-bar/ACF bonding machine, intended for connecting flexible circuits, PCBs, and displays, among other applications. The DT-250 features a manually operated 2-position front/rear slide with approximately 200 mm of travel. Fjdpfxozzau Ue Aatjpl Manufacturer: Unitek Eapro B.V., Helmond, Netherlands Type: ACF DT-250-GH Serial number: 0620905 Year of manufacture: 2006 Power supply: 230 V Current: 6.3 A Phase: 1-phase CE marking Type: ACF DT-250-GH Serial number: 0620905 Year of manufacture: 2006 Power supply: 230 V Current: 6.3 A Phase: 1-phase CE marking Property Specification Type DT-250 Technology Pulsed Heat / Hot Bar Application ACF bonding / heat-seal bonding / reflow Slide Manual, 2 positions Travel 200 mm Bonding head SH500 Maximum force 30–500 N Pneumatic operation Yes Air pressure 4–8 bar Thermode temperature up to approx. 600 °C Temperature control Uniflow pulsed heat Workpiece/fixture up to approx. 160 × 160 mm

Condition: good (used), total length: 4,000 mm, total width: 2,000 mm, plate height: 295 mm, Manufacturer: STOLLE Type: DTS Year of manufacture: 1990 Specifications Metric US Standard Length 4000 mm Width 2000 mm Height 295 mm Number of T-slots 4 T-slot spacing / interval 400 mm T-slot size 42 mm Weight per plate approx. 6000 kg Dimensions (Estimated) Length 4000 mm Width 2000 mm Height 295 mm Weight 6200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, you will not represent or constitute contractual terms. We recommend you verify all important details. Fodpjwp E Ncjfx Aatepl

Condition: ready for operation (used), Year of construction: 2006, operating hours: 31,900 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OKUMA, controller model: OSP-200M, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis Okuma MA-600HB was manufactured in 2006. It features a maximum spindle speed of 12,000 RPM and a BT50 tool holder. The machine is equipped with a coolant system in the spindle at 30 bar and includes a Renishaw MP10 for tool measurement. If you are looking to get high-quality machining capabilities, consider the Okuma MA-600HB horizontal machining centre we have for sale. Contact us for further details. • Coolant through spindle: 30 bar • Tool breakage detection • MOP-Tool • DNC-DT Fpsdpezx D Dzjfx Aatel Additional equipment • NC table 0,001 (NC rotary/indexing table) • Renishaw MP10 probe • Mayfran MT10 (chip conveyor/coolant handling) Technical Specification Taper Size BT 50

Year of construction: 2022, condition: like new (used), functionality: fully functional, We are presenting the almost brand-new EyeC GmbH EyeC Proofiler 1200 DT (EyeC 3023) Print Inspection & Quality Control System. HIGH CONVERSION DESCRIPTION Like New - Immediate Availability - Priced to Sell - Ready for Export Model: EyeC Proofiler 1200 DT Condition: Like New - barely used EyeC Proofiler 1200DT print inspection system in excellent condition, barely used and fully operational. This is a great opportunity to acquire a high-end inspection system at a significantly lower price. ✔ Print-to-Print & Print-to-File Comparison ✔ High-precision defect detection ✔ Suitable for pharmaceutical, packaging, and commercial printing The machine is installed and can be tested. Additional photos and videos are available upon request. 🌍 Available for export 📍 Located in Turkey ✈️ Delivery Terms: EXW Turkey – ready for export ⚠️ Serious buyers only - quick decision preferred 📧 Contact now for price discussion and details ▪️ Inspection Type: Print-to-print & Print-to-file comparison ▪️ Application: Print Inspection & quality control ▪️ Max. inspection width: approx. 1200 mm ▪️ Camera system: High-resolution line scan camera ▪️ Lighting: Integrated LED illumination system ▪️ Defect detection: Missing print, color deviation, misalignment, defects ▪️ Software: EyeC Proofiler Software (original) ▪️ Operation: PC-Controlled System Fpedpfxeyxfrpj Aatsl ▪️ Speed: High-speed automated inspection ▪️ Industry: Pharmaceutical, packaging, commercial printing The machine is installed and can be demonstrated upon request. If you have any questions or need further information, you can send us a message or call us. You can also reach us via email or WhatsApp.

Condition: used, Year of construction: 2008, functionality: limited functionality, For sale is a complete driverless transport system (DTS/AGV) from the renowned manufacturer E&K Robotics, built on proven Linde L16 base vehicles. The system is optimally coordinated and will be sold including the entire control infrastructure. Scope of delivery & technical data: 7x Driverless transport vehicles (DTV): 5x Year of manufacture 2008 2x Year of manufacture 2016 1x Central control center: Including control PC and software. Current status & availability: Availability: The entire system is currently fully integrated into production and can be inspected under operating conditions after consultation. The planned dismantling/replacement will take place in 07/2026. After that, the system will be ready for collection. Condition: Six of the seven vehicles are currently in daily operation. The seventh vehicle has a defect in the central control unit and is currently being used as a source of spare parts. Individual sale: Individual sale of vehicles is possible after consultation for €4,000. Fjdey Sx Iwjpfx Aatjpl

Condition: like new (used), functionality: fully functional, Year of construction: 2022, control type: PLC-controlled, Equipment: CE marking, documentation/manual, type plate available, Capacity: 4100 x 6 mm. Stroke: 120 mm. Control: DURMA DT-7. Serial No.: 608922260. Dimensions: 5230 x 3600 mm. Height: 2150 mm. Weight: 11,460 kg. Fedpfeyrdfaox Aatjpl

Condition: ready for operation (used), Year of construction: 2007, operating hours: 21,500 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OKUMA, controller model: OSP-200M, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 150, number of axes: 4, This 4-axis Okuma MA-600HB was manufactured in 2007. It features a maximum spindle speed of 6000 RPM and a robust tool capacity of 150 tools in the automatic tool changer. The machine is equipped with a 30 bar coolant system and includes advanced features such as tool breakage control and DNC DT. If you are looking to get high-quality machining capabilities, consider the Okuma MA-600HB horizontal machining centre we have for sale. Contact us for further details. • Spindle: 30 bar through-spindle coolant • Control/Options: DNC/DT, MOP-Tool • Functions: Tool breakage control, Tool length offset Additional equipment Fjdpfx Aajzx Dypotspl • Renishaw MP10 probe • Robot interface type E • Mayfran MT10 chip conveyor

Year of construction: 2013, condition: excellent (used), Temperature Test Chamber VTS³ 7160-5 H Water-cooled For sale is a used temperature test chamber from the manufacturer Vötsch. The test chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, Fpsdpfx Aezv S Hfjatel as well as development and stress tests. Technical data Manufacturer: Vötsch Type: VTS³ 7160-5 H Equipment type: Temperature test chamber Test chamber volume: approx. 1568 liters Test chamber dimensions: approx. 1100 x 950 x 1498 mm (W x D x H) Housing dimensions: approx. 1300 x 2635 x 2013 mm (W x D x H) Weight: approx. 1700 kg Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 5 K/min Temperature change rate (cooling): approx. 4 K/min Max. heat compensation: approx. 5000 W Temperature deviation (time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.1 to ± 2.0 K Refrigerant: R404A Refrigerant quantity: 5.20 kg ND max.: 18 bar g HD max.: 25 bar g Refrigerant: R23A Refrigerant quantity: 1.30 kg ND max.: 18 bar g HD max.: 25 bar g Cooling water consumption under full load at Temperature difference Dt = 10 K: 2.2 m3/h Temperature difference Dt = 5 K: 4.4 m3/h Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.6 kW Rated current: 32 A Features Touch panel operation Interior made of stainless steel Side access ports Test chamber equipment as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition according to pictures Scope of delivery 1x Vötsch VTS³ 7160-5 H temperature test chamber Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight transport possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Year of construction: 2014, condition: good (used), Melag Melatherm 10 DT Thermal Disinfector The Melag MelaTherm 10 DT is a washer-disinfector specifically designed for the automated reprocessing of instruments in medical and dental settings. It integrates essential functions such as active drying and media loading directly into the unit to save space in the practice. Melag Melatherm 10 DT Thermal Disinfector The Melag MelaTherm 10 DT is a washer-disinfector specifically designed for the automated reprocessing of instruments in medical and dental practices. It integrates key functions such as active drying and media loading directly into the unit to save space in the practice. The Melag MelaTherm 10 DT is a thermal disinfector specifically designed for the automated reprocessing of instruments in medical and dental settings. It integrates important functions such as active drying and media loading directly into the unit to save space in the practice. Dimensions: The unit measures approximately 59.8 x 81.8 x 67.8 cm (W x H x D) and therefore fits under a standard 60 cm worktop. Capacity: The optimized reprocessing chamber offers space for instrument sets for up to 45 patients per batch. Active drying: Reliably protects instruments from corrosion and recontamination thanks to integrated external and internal drying. Integrated process media: Cleaner, neutralizer, and rinse aid are stored in a space-saving drawer directly within the unit. Manufacturer: Melag Type: Melatherm 10 DT Voltage: 230 V Year of manufacture: 2014 Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request! Fodpfx Aasyk Eugetjpl

Condition: used, Year of construction: 2020, operating hours: 5,945 h,

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 30 h, load capacity: 250 kg, lifting height: 28,000 mm, fuel type: diesel, TRUCK AERIAL PLATFORM Fpjdozy E Iqspfx Aatel Cela DT 28 Year 2024 Working height 28 m Horizontal outreach 14 m Basket capacity 250 kg Material lifting basket capacity 250 kg Hours 30 km 990 Automatic stabilization Automatic boom closure Remote control Fiat Iveco with air conditioning Checked and fully functional

Condition: good (used), mileage: 4,50,483 km, power: 132 kW (179.47 HP), first registration: 02/2017, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, total length: 5,550 mm, total width: 2,100 mm, total height: 3,150 mm, Year of construction: 2017, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, seat heater, = Additional Options and Accessories = - Heated mirrors - Tachograph (driver's control unit) - Halogen lamp - Manual - Radio/cassette Fpodpjzyydyofx Aatsl - Reversing camera - Fabric = Notes = Configuration: 4x2, dual tires, payload: 1510 kg, unladen weight: 1990 kg, gross vehicle weight: 3500 kg, cabin type: single cab, cruise control, tachograph (driver's control unit), air conditioning, number of airbags: 1, parking assistance: none, electric windows, electric mirrors, radio/cassette, GPS navigation, color: white, heated mirrors, reversing camera, lighting type: halogen lamp, speed limiter, climate control, seat heating, Bluetooth, engine power: 132 kW (177 hp), fuel: diesel, Euro: 6, drive technology: timing chain, transmission type: automatic, speed limiter, power steering, ABS, starter battery, central locking, seats: 3, seat arrangement: 1+2, seat cover: fabric, seat adjustment: manual, Clickstar ac automatic EURO6 org NL cruise control, navigation, side door, tire type: summer tires = Additional Information = Axle configuration Tire size: 195/75R16 Brakes: disc brakes Suspension: leaf spring suspension Axle 1: tire tread depth left: 2 mm; tire tread depth right: 3 mm Axle 2: dual tires; tire tread depth left inside: 6 mm; tire tread depth left outside: 6 mm; tire tread depth right inside: 5 mm; tire tread depth right outside: 5 mm Weights Unladen weight: 1,990 kg Payload: 1,510 kg GVWR: 3,500 kg Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: V-513-DT

Condition: excellent (used), Year of construction: 2014, CNC turning and milling center Okuma Multus U4000 1SC 1500 BigBore Control: OSP-P 300S Year of manufacture: 2014 Internal machine number: 35 X-axis: 695 mm Y-axis with travel: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° Turning diameter: 650 mm Turning length: 1,500 mm Tool holder: Capto C6 Total number of tool positions: 80 Accessories: NC tailstock Adjustable hydraulic steady rest AX 5 on NC axis Coolant system with strip filter Hydraulic 3-jaw chuck Kitagawa BB 212-11 Automatic touch probe High-pressure coolant IKZ Fedpfxoyk Ddgo Aatspl Software option High Cut Pro (High-precision package with Super Nurbs) CAS collision protection system Spindle orientation, main spindle, electric Multitool including turning function for Y-axis Helix function Automatic main power cut-off DNC-DT interface Machining Navi M-i (milling), speed control for minimizing vibrations. One-Touch IGF Chip conveyor