Used Dts for sale (129)

Condition: new, Year of construction: 2025, functionality: fully functional, Dobot collaborative robot DOBOT MG400 Model DT-MG-P4R07-01I Nsdew I Sl Tspfx Adwjcl Weight: 8 kg Payload: 500 g (max. 750 g) Reach: 440 mm Axes: 4 Repeatability: ±0.05 mm

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1140165, Machine from the insolvency of an automotive supplier TECHNICAL DETAILS Control: Haas Spindle mount: CT 40 Nsdpfxswqcqtj Adwocl Other auctions from the same location: EBU E 35 Search-ID=19074266 Exner H4SP-200 Search-ID=19074391 HAAS DM-2 Search-ID=19074331 HAAS DT-1 Search-ID=19074411 Hans Schoen SH 200 Search-ID=19074426 Mora Primus 7107 V3 Search-ID=19074526 Rapid DGL 250 Search-ID=19074421 Hans Schoen SH 16 Search-ID=19074441 SW Schwäbische Werkzeugmaschinen BA 312 V3 Search-ID=19074456 SW Schwäbische Werkzeugmaschinen BAS 03-11 Search-ID=19074466 EQUIPMENT - Tool changer - Chip conveyor - Swivel axis Further details according to manufacturer - without guarantee Travels X / Y / Z: 711 x 406 x 394 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Table size: 864 x 381 mm T-slot distance: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of slots: 3 Table load: max. 113 kg Tool changer: double gripper Tool diameter: 64 mm Tool length: 178 mm Tool weight: 5.4 kg Tool slots: 18+1 Machine dimensions: approx. 2.8 x 2.2 x 2.6 m Transport dimensions: approx. 2.6 x 2.3 x 2.5 Transport weight: approx. 2.5 t

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1127626, table width: 400 mm, table length: 600 mm, Equipment: chip conveyor, Machine from the insolvency of an automotive supplier TECHNICAL DETAILS Table size: 400 x 600 mm EQUIPMENT - Chip conveyor - Tool changer Other auctions from the same location: EBU E 35 Search-ID=19074266 Exner H4SP-200 Search-ID=19074391 HAAS DM-2 Search-ID=19074331 HAAS DT-1 Search-ID=19074411 Nsdpowqcqysfx Adwocl Hans Schoen SH 200 Search-ID=19074426 Mora Primus 7107 V3 Search-ID=19074526 Rapid DGL 250 Search-ID=19074421 Hans Schoen SH 16 Search-ID=19074441 SW Schwäbische Werkzeugmaschinen BA 312 V3 Search-ID=19074456 SW Schwäbische Werkzeugmaschinen BAS 03-11 Search-ID=19074466 Further details according to manufacturer - without guarantee Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Tool taper: BT 30 T-slot distance: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of slots: 3 Table load: max. 113 kg Tool changer: double gripper Tool diameter: 51 mm Tool length: 178 mm Tool weight: 2.5 kg Tool slots: 20+1 Machine dimensions: approx. 2.6 x 1.7 x 2.6 m Machine dimensions transport: 2.5 x 2.0 x 2.5 m Weight: approx. 2.4 t

Condition: new, functionality: fully functional, NEW Perfect DT Series of machines with the touch screen display and easy to use interface. Automatic NC controlled downfeed operation with spark out. Plunge grinding, criss-cross grinding and surface grinding. 300 x 600mm grinding capacity 500mm spindle centre to table 355 x 38 x 127mm grinding wheel Nodpfx Adenzh T Newscl Fine pole mag chuck + demagnetiser Coolant system with paper filter and magnetic seperator NC Auto downfeed control system LCD touch screen control panel with easy to use graphical interface Criss-cross grinding function Auto criss stroke adjustment via the touch screen control Ballscrew and microfeed for the cross feed Stepless variable hydraulic system Quantitive lubrication system Back water splash shield

Condition: excellent (used), Blancher Pos. number: LTC00006401 Make: DTS Type: automatic direct steam heated full water screw blancher Model: 2004 Capacity: Ø = 800 mm x L = 3.660 mm Volume: ± 1.800 litre Input height: 1.650 mm Dimensions: L x W x H = 4.850 x 1.950 x 1.800 mm Frame: stainless steel Nedpfx Adohbvmuewscl Power supply: 400 Volt – 50 Hz – 3,0 kW Steam: 4 bar Features: stainless steel landing overflow sieve with collection tank for blanched water including steam injection temperature controlled with circulation pump mechanical motor gearbox This is linked with Cooler Pos. number: LTC00006331 Make: Lubot / Wakker Type: automatic screw cooler Model: 2004 Capacity: Ø = 500 mm x L = 3.000 mm Volume: ± 600 litre Output: 850 mm Dimensions: L x W x H = 3900 x 1000 x 1800 mm Frame: stainless steel Power supply: 400 Volt – 50 Hz – 0,55 kW Features: mechanical variator as-is or tested and set to customer needs

Condition: used, Year of construction: 2015, 2015 | Fliegl DTS 300 | Used Low Bed Semi-trailer 📍Location: Austria 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 21900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 13 inspection points 13 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Fresh Austrian road allowance, nice condition. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39628 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Nsdjx Ut Uqspfx Adwocl 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, machine/vehicle number: WFDFLT3300101xxxx, Year of construction: 2025, Please contact ATS Norway for more information Ncjdpfx Ajyc Dr Uodwel Please provide reference number upon request: 22242 Specifications: 3 axles Steering on 1 axle Lift axle on 2 axles Air suspension Good tires Full-width double hydraulic ramps Max payload: 22,860 kg Ready for delivery Description:Fliegl machinery trailer with full hydraulic ramps.The trailer has seen little use and is ready for delivery. Leasing takeover possible. Technical approved: Yes EU-approved until: 23.05.2026 Own weight: 7140 Total Weight: 30000 Payload: 22860 Width: 252 Length: 1166 Model: DTS 300 Maskinslep -Hydraulisk kjørebru – Eu-godkjent.

Condition: used, empty load weight: 6,520 kg, maximum load weight: 23,480 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 8,610 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length drop deck approx. 6.50 m, loading area length total approx. 8.60 m, loading height approx. 900 mm, , Vehicle is offered on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ncjdpfex Sxrvsx Adwsl

Condition: used, Year of construction: 2007, Labotek dryairdryer DMD/DT 25/40 40 Liter year 2007 + conveyor + 2 K Mischweiche Nodpetzmuhofx Adwjcl price: 3.450 € Contact: Mr. Rainer Eckerle

Condition: new, machine/vehicle number: 195f80ad09517628522e33a91, empty load weight: 7,300 kg, maximum load weight: 16,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear splash guards across the entire width Quarter-shell mudguards in front of 1st axle 1st pair of wheel recesses after cranking, recessed in the low bed in the tramline area, slanted towards the entrance, bottom length approx. 1600 mm, approx. 400 mm deep. Note! Frame in main beam area 400 mm higher than wheel recess. 2nd pair of wheel recesses recessed between the axles in the low bed in the tramline area, sloping towards the entrance, bottom length approx. 600, approx. 300 mm deep. Note! Frame in main beam area 300 mm higher than wheel recess. Nodpfx Aji Ri Rvjdwecl Widenings extendable to 3,000 mm (not in rear bevel) (However, the track width of the construction machinery or vehicles to be transported must not exceed outer frame width 2,550 mm) Widenings extendable to 3,000 mm, also in the wheel recesses below, foldable on the wheel recess extensions, (widening not in rear sloping) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 1 pair of lashing cut-outs in the front side member, recessed on offset, 10 tons each 4 pairs of lashing holes in the outer frame, 5 tons each (lashing strap attachment) 7 pairs of lashing points at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable. Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed in the drive-over slope to the offset then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6500 mm Drive-on ramps Steel ramps 2 800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to

Condition: new, machine/vehicle number: 2dff0c136c85096f36822a0bb, empty load weight: 7,150 kg, maximum load weight: 16,850 kg, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with strong ball bearing slewing ring, storage box embedded in turntable front end Folding rear support 2 wheel chocks with holder Aluminum side collision protection Rear spray flaps across the entire width Widenings can be extended to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 3 pairs of lashing points each 10 to integrated in the floor at the front 6 pairs of lashing points at the top and sides, each 10 tons, integrated in the outer frame 1 x to the neck area remaining distributed in between Spacing not greater than 1200 mm 1 x rear slope 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation axle load compensation (rocker compensation) Brake system 2-line compressed air brake system Colored line routing for easy servicing. Spring-loaded parking brake Incl. 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Wheels and tires 235 / 75 R 17,5 at the choice of the manufacturer Steel rims in twin arrangement, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area steel floor, then with 70 mm softwood floor, steel/checker plate flooring in the wheel housing area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 8,200 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Incl. with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Nedpji Riy Esfx Adwecl Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's choice Drive-on ramps Hot-dip galvanized Attention: Archive pictures!

Condition: new, machine/vehicle number: ede0610378cbe39cc4883251d, empty load weight: 24,000 kg, maximum load weight: 7,550 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction 1st pair of wheel recesses after steel platform recessed in the tramline area, inclined towards the entrance, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! Frame in main beam area 400 mm higher than wheel recess. If machines are to be driven where the overall height is to be checked, we request a technical data sheet for the machine types with exact details (if overall height is exceeded -> customer risk, approval required), (depending on the ground clearance under the machines, inserts in the wheel recesses may be required by the customer). Turntable with strong ball bearing slewing ring, storage box embedded in turntable front end Folding rear support 2 wheel chocks with holder Aluminum side bumper Rear spray flaps across the entire width Widenings can be extended to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed outer frame width 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 110 3 pairs of lashing points, 10 tons each, integrated in the floor at the front Incl. 6 pairs of lashing mushrooms at the top and sides, each 10 tons, embedded in the outer frame 1 x to neck area remaining distributed in between Distance not greater than 1200 mm 1 x rear slope 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included) Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Colored line routing for easy service. Nodpfsi Ri Rysx Adwjcl Spring-loaded parking brake 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles which guarantee the effectiveness of the ABS! Wheels and tires 235 / 75 R 17,5 at the choice of the manufacturer Twin steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area steel floor, incl. Afterwards with 70 mm softwood floor, steel/checker plate covering in the wheel housing area Rear slope with 70 mm softwood floor Low loading area incl. rear slope 8 200 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. cannot be achieved. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany Incl. with

Condition: new, machine/vehicle number: d461243f559015adca5bb372c, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguard 1st axle with anti-spray flapsAnti-spray flaps behind 2nd and 3rd axle 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. Extensions extendable to 3,000 mm Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes (40 lashing options) 1 pair of lashing cut-outs in the front side member on offset, 10 tons each 4 pairs of lashing holes in the outer frame, 5 tons each (lashing strap attachment) 7 pairs of lashing mushrooms at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes) 2 additional pairs of hinged lashing eyes, 10 tons each 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco, Knorr or Haldex Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) Njdpfx Adsi Ri Dlswscl 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed into the drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle, actuation on the left side in FR Hydraulic connection with SVK plug NW 10/3, incl. connection hose Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's discretion Drive-on ramps Hot-dip galvanized Attention! These are archive pictures!

Condition: new, machine/vehicle number: 628cde0fe99cc2d3c8eaa8dd8, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguard 1st axle with anti-spray flapsAnti-spray flaps behind 2nd and 3rd axle 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Extensions extendable to 3,000 mm Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes (40 lashing options) 1 pair of lashing cut-outs in the front side member on offset, 10 tons each 4 pairs of lashing holes in the outer frame, 5 tons each (lashing strap attachment) 7 pairs of lashing points at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) 2 additional pairs of hinged lashing eyes, 10 tons each 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension Drum brake axles, at the manufacturer's choice Axle/chassis laser-measured Reduction of tire wear and fuel consumption Ncodoi Ri Ddepfx Adwel Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco or Knorr Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed into the drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's discretion Drive-on ramps Hot-dip galvanized Attention! These are archive pictures!

Condition: new, machine/vehicle number: f8fb99947a1c19bc4d63549ff, empty load weight: 6 kg, maximum load weight: 17 kg, overall weight: 24 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguard 1st axle with anti-spray flapsAnti-spray flaps behind 2nd and 3rd axle 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 1 pair of front lashing eyes recessed on offset, 5 tons each 7 pairs of lashing rings at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) 2 additional pairs of hinged lashing eyes, 10 tons each 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's discretion with M&S marking Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable clutch heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco or Knorr Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Nedpfsi Riwfex Adwscl 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed into the drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Additional ramp safety device hinged at the bottom (to prevent the ramps from slipping sideways, not in conjunction with hydraulic side ramp displacement) covered with wood with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Coun

Condition: used, This listing is for a CFS Protemist DT II Automated Protein Synthesizer Abnova presents a new generation, fully automated robotic desktop protein synthesizer, Protemist® DT II, for high throughput eykaryotic protein production. The system is developed and manufactured by CellFree Sciences Co., Ltd. It synthesizes the protein of interest using a special wheat germ lysate and a bi-layer reaction. Protemist® DT II can run two scales of translational reaction, 1.2 ml (24 well) or 6 ml (6 well). Batch affinity purification is available for affinity tagged fusion protein synthesized in 6-ml (6 well) reaction scale. This is an expert system in transcription, translation, and purification. The protocol and automation is designed for easy operation obviating the need for manual handling and production. Specifications Dimensions: 79cm(h) x 50cm(d) x 70cm(w) Weight: 100 kg Power: 100~240 V 50/60 Hz Voltage Fluctuation Tolerance: ±10% Power Consumption: 350 VA Max. Number of Samples Per Run: 6 samples: transcription, translation and affinity purification (6 ml/sample) 24 samples: transcription, translation (1.2 ml/sample) Processing Volumes: 100 ul to 800 ul Reagent Unit: Temperature Control Method: Peltier moduleTemperature Setting: 4°C (Fixed) Dispensing Volume Variation: Within ±5%, CV < 1% (in dispensing 100 µl distilled water) Ambience for Installation: 15~30°C, humidity < 75%, dew condensation to be avoided Ncedpfexzh Ucjx Adwjl

Condition: used, This listing is for 1 of 18 Qiagen BGR-Z-Modul Dt-1100uL Bez Handler with grippers. Each boxed in original packaging These units is in full working condition and ready for immediate use The Qiagen BGR-Z-modul Dt-1100uL Bez Handler with Grippers (Part No. 9015210) is a component designed for use with Qiagen's automated liquid handling systems, such as the BioRobot 8000. This module facilitates precise and efficient handling of 1,100 µL volumes, equipped with grippers to manage sample tubes or plates, enhancing the automation of laboratory workflows. Key Features: Volume Capacity: Designed to handle 1,100 µL volumes, suitable for various liquid handling tasks. Ncodpexv Dnhofx Adwjl Gripper Mechanism: Equipped with grippers to securely handle sample tubes or plates, ensuring accurate placement and retrieval. Compatibility: Specifically designed for integration with Qiagen's automated systems, ensuring seamless operation and reliability.

Condition: used, Year of construction: 2018, operating hours: 2,883 h, load capacity: 2,000 kg, lifting height: 2,600 mm, fuel type: electric, mast type: duplex, construction height: 1,730 mm, Manufacturer + model: CROWN DT 3040 Mast: 2F2600 + initial lift ID: 24031.2904 Cat.: Used Mast: 2F2600 Lowered height: 1730 mm Lifting height: 2600 mm Capacity: 2000 kg Year: 2018 Hours: 2882 hours Capacity: 24 V / 375 Ah Options: - DOUBLE pallet stacker - PROPORTIONAL lifting & lowering valves Njdpsx Ny Ndsfx Adwecl - Foldable PLATFORM and GUARDRAIL - POWER steering

Year of construction: 2013, condition: like new (used), Thermal shrink machines are devices that allow for very rapid (3–5 sec.) shrinking of bags around the packaged product by immersion in hot water. ADVANTAGES: • Attractive product appearance • Process started by a button on the control panel • Digital temperature regulation Ncjdpfoxx Tp Hjx Adwel • Optimal hygiene • Robust stainless steel construction • Possibility of using insulating balls to improve process efficiency • Base immersion enabled by hydraulic actuator movement TECHNICAL SPECIFICATION DT100 Machine dimensions: 880 x 1000 x 1320 mm Chamber dimensions: 600 x 800 x 220 mm Immersion depth: 220 mm Cycle time: 3–5 sec Weight: 155 kg Voltage: 400 V-3-50 Hz Power: 15.0 kW

Condition: good (used), Year of construction: 2007, Labotek dryairdryer DMD/DT 25/40 40 Liter year 2007 + conveyor price: 3.450 € Contact: Mr. Rainer Eckerle Ncjdpfxev Rcwzo Adwsl

Condition: like new (used), Year of construction: 2022, For sale: EXILE prepress system – complete set: CTS imager and UV LED exposure cabinet. Devices from mid-2022. 1. Computer to Screen – EXILE Spyder II DTS 30″ • Serial number: 900 100523/182 • Date of manufacture: 07/2022 • Version: DTS 30″ • Pin registration: MHM • Included: 1× Screen Drum • New printhead: 2025 2. Exposure cabinet – EXILE V LUX UV LED Exposure Cabinet • Serial number: 450 04560 03/129 • Date of manufacture: 05/2022 Ncodpfoxb Ru Eex Adwol 3. RIP software • SCREENMAKER RIP Kit (for Windows systems)

Condition: good (used), total length: 4,000 mm, total width: 2,000 mm, plate height: 295 mm, Manufacturer: STOLLE Type: DTS Year of manufacture: 1990 Specifications Metric US Standard Length 4000 mm Width 2000 mm Height 295 mm Number of T-slots 4 T-slot spacing / interval 400 mm T-slot size 42 mm Weight per plate approx. 6000 kg Dimensions (Estimated) Length 4000 mm Width 2000 mm Height 295 mm Ncsdpfx Adowp E Ncowsl Weight 6200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, you will not represent or constitute contractual terms. We recommend you verify all important details.

Condition: good (used), Year of construction: 2004, Number of T slots: 8 + 3 Jump from T to T: 280mm T size: 22mm Nodpjwu D Afjfx Adwscl Number of matching pieces:5 Length: 1250mm Width: 750mm Height: 2500mm Weight: 2900kg

Condition: ready for operation (used), Year of construction: 2002, Operating pressure double jacket/tubes: 10bar/6bar, material: stainless steel, operating temperature: 180°C, output: approx. 350kg/h, machine dimensions X/Y/Z: approx. 2100mm/1000mm/3700mm, weight: approx.1500kg. Documentation available. On-site inspection is possible. Ncedpfx Aouh Azvedwjl

Condition: new, empty load weight: 6,060 kg, maximum load weight: 17,940 kg, overall weight: 24,000 kg, axle configuration: 3 axles, color: silver, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, beacon, 3 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), extendable to 3m, lashing rings, 2-part loading ramps, mechanical ramps, extendable drawbar, side aluminium underrun protection, twin tyres, EBS. Nsdpfxsxbttqo Adwocl Body: Loading length approx. 8.5m, extendable to 3.05m. Demonstration vehicle! Parabolic suspension with axle compensation at the rear, 3x 10t SAF axles, permissible gross weight up to 30t, drawbar adjustable in length. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!