Used Electrostatic Powder Line for sale (16,928)

Condition: used, machine/vehicle number: 005449, undefinedPosition 2: CNC for Flexible Drilling MORBIDELLI-FLEXA 912+FLEXA 902 Position 3: Automatic Dowelling Machine MORBIDELLI-FLEXA 912+FLEXA 902 Chjdpowucl Esfx Addof

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MZBF02, Equipment: Android Auto, CE marking, The production line can widely used to filling,capping and labeling for various semi-liquid,ointment paste, dense catsup and various materials with granule, such as drinks with fruit, honey,syrup,jam, peanut butter, sesame paste,tomato sauce, peper sauce, etc.Operating principle By the reciprocating motion of the pistons in the material cylinders of the Filling Machine, negative pressure produces in the front chamber of the cylinder so that material could be pumped. The stroke of the cylinder is controlled by a signal valve so as to adjust filing amount and to achieve accurate filling results.Property The Filling Machine with extra functions is designed and manufactured by our factory with reference to the same kind of foreign machines. Cedpfx Aoxuncteddjhf

Condition: used, Year of construction: 2001, Two lines available: Line 1 for hexagonal wire beads Line 2 for square wire beads Chsdpfx Adjxb U Agsdsf One line consists of bead winder, bead extruder and cooling line, carousel and loader robot + coil winding.

Condition: used, Slabs finishing line composed by loading, trimming, back calibration, front calibration, 2 Xolar polishing machines, selection, unloading. Including supply of new transverse and longitudinal trimming machine. Chjdpfx Adex An Iledof

Condition: used, Year of construction: 1997, functionality: fully functional, Production line for packing, blending, filtering and homogenizing of dry products from 2 manufacturers - D.H.T. van den Dikkenberg and BTH (Premier Tech). All dairy powder and powders of plant origin can be used, such as milk powder (SMP/WMP), whey powder, buttermilk powder, powder of milk permeate, lactose, dextrose, whey protein/fat concentrates, FFMP, soy protein, pea flour etc. The number of blended ingredients is unlimited. The line is suitable for both food and feed purposes and has a producing capacity of 3mt per hour. The line for the production & packing of dry blends: - meets the requirements for materials in contact with food products; - is made of durable materials that don't change the smell and taste of food products, don't absorb moisture, are corrosion-resistant and safe to use; - all surfaces are resistant to repeated exposure to cleaning/disinfecting agents; - is designed and manufactured in such a way that there are no cavities inside in which the processed products accumulate, and this wouldn't create conditions for contamination of the manufactured products; - is mounted in two 40 foot containers, which ensures easy transportation of equipment. The production line has the following units: 1) two-stage filtering of the poured raw materials through coarse and fine sifting sieves First, the raw materials are sifted through a sieve with eyes of 5 mm in diameter. Chjdpewhf Ddsfx Addsf At this stage, foreign impurities and hardened particles over 5 mm are separated. After that, the raw materials are sifted through a second sieve with eyes of 0,2 mm. In this way, all foreign particles over 0,2 mm are completely separated from the raw materials. 2) mixing of components into a homogeneous blends The mixing process in a horizontally located mixer is very gentle. The blended ingredients remain undamaged and retain their structure, which is very important for the products of instant category. 3) dosing of finished products into bags The line is equipped with a dispenser, which is technologically connected to automatic scales. It allows to select and set the desired volume of the packed product. Standard packaging options are bags of 20-25 kg net. 4) suction of excess air An integrated vacuum unit helps to suck out of the filled bags an excess air. The product becomes denser, less airy, and when stacking the bags on the pallets, the entire structure becomes more stable. This is very important for the safety of the cargo during transportation. 5) heat-sealing of the inner poly liner The line is equipped with a heat-sealing unit (BTH BV), which is used to seal the inner poly liner. Sealing the liner ensures its tightness, which helps to prevent the moisture penetration into the finished product. Since the powder is very hygroscopic product, its reliable protection from moisture is very important for preserving the quality of the manufactured products. 6) sewing of paper bags with/without crepe paper The line also has an integrated sewing unit (sewing head - Fischbein SA) for closing of the paper bags. For more reliable tightness of the packaging, a crepe paper tape in the same colour as the bag may be used additionally. The line is equipped with 3 bunkers with a capacity of 1mt each: 1) raw material blending bunker 2) product settling bunker after blending 3) finished product bunker The line has a high production efficiency and very easy maintaining and operation.

Condition: used, Year of construction: 2011, Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Chjdpeuqfa Iefx Addef Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm

Condition: used, machine/vehicle number: 007948, Position 1: Horizontal Storage Systems PRIESS-PRIESS ASSEMBLY LINE Cedjwk Uygspfx Addehf Position 2: Horizontal Storage Systems PRIESS-PRIESS ASSEMBLY LINE Position 3: CNC for Flexible Drilling PRIESS-PRIESS ASSEMBLY LINE Position 4: Clamping Press PRIESS-PRIESS ASSEMBLY LINE Position 5: Automatic Dowelling Machine PRIESS-PRIESS ASSEMBLY LINE

Condition: refurbished (used), BANDSAW HEADRING Mod. 1300/SG-CFC - Cast iron structure with stabilizing treatment. -right hand design (cutt from right to left!) Codpfxoxzth Is Addshf - Flywheel diameter 1300 mm. - Flywheel width 165 mm for maximum blade width of 180 mm. -Filled flywheels with special ribs to enhance mechanical characteristics, subjected to stabilizing treatment; shaped with double curve for the best stability on the table; perpendicular to the rotation of axis. - 55kW (75 HP) main engine, automatic star-delta starter, pulley, belts and brakes -chains for timber unload HYDRAULIC CARRIAGE CFC - 4 clamps for log centering - Maximum distance from blade to clamp 1000 mm. -Max opening of hooks 900 mm - COMPUTERIZED-Mudata control system - Continuously variable speed feed from 0 - 140 ml/min and exploits the power of the main motor to obtain a quality cut, hydrostatic design -4 turning logs chain systems - Control unit and seat, multi-function joystick and electric servo control !!!!! OPTIONAL !!!!! INSTALLATION..... 40,000 EUR EXCLUDING VAT, FOR A 1-YEAR WARRANTY Mechanization and unloading rollers Log ramp, length 4 m - 20,000 EUR + VAT Log loading arms on the log saw trolley, hydraulically operated with a single cylinder - 20,000 EUR + VAT Roller conveyor - EUR 20,000 + VAT - Length 7.60 m - Width 1.1 m - Rollers Ø 215 mm - Gear motor Second unloading roller conveyor - EUR 20,000 + VAT - Length 7.2 m - Width 1080 mm - Rollers 840 mm - Left/right chains - Own motorization These options significantly increase production flow, reduce downtime, and automate the log exit area. Advantages for industrial production - Complete line, fully reconditioned in 2025 - Excellent cutting stability thanks to cast iron construction - Extremely precise positioning with BRUSHLESS servo motors - High productivity and minimal maintenance - Ideal solution for factories wishing to modernize their cutting flow without investing in new equipment

Condition: used, mileage: 58,515 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 03/2024, loading space length: 3,350 mm, emission class: euro6, color: white, number of seats: 3, Year of construction: 2024, total length: 5,986 mm, total width: 2,059 mm, total height: 2,547 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and interim sale excepted! Internal number: 1171. PU05544 ----EQUIPMENT - Double rear wing doors 256°, without windows - Speed limiter 130 km/h - LED lighting in cargo area - Cargo area floor – wood - SVO: Express Line Package - Side wall panels up to roof height - 6-speed gearbox - ABS, EBD, and DRIVER ASSISTANCE - Driver's airbag - Exterior mirrors electrically adjustable and heated - Battery: Extended battery life - On-board computer - Roof, medium height - Double rear wing doors/180° (without windows) - Tachometer - Third brake light - Electrically operated front windows - Electronic parking brake - Ford Easy Fuel - FordPass Connect - Halogen headlights with daytime running lights - Lockable glove compartment - Interior lighting with delayed switch-off - Automatic climate control - 70 l fuel tank - Paint: Solid color paintwork - Cargo compartment lighting - Emergency call assistant - Package: Technology Package 2 - Particle filter: Diesel particulate filter - Radio: 12" multi-function display & Ford SYNC 4 - Tire pressure monitoring system - Wheels: Full wheel trims - Wheels: Tire repair kit - Wheels: Steel 6.5 J x 16 with 235/65R16 Chsdpfoxz I Hfox Addjf - Windshield wipers with rain sensor - Sliding door: sliding door, right - Rear mud flaps - Side protection strips - Power steering - Seatbelts - Seats: Seat Package 18A - Start-stop system - Partition wall (plastic) at B-pillar height - Rear entry step - Air recirculation system - Lashing eyes - Immobiliser - Heat insulating, lightly tinted glazing - Central locking with remote control - Overhead storage compartment at the front ... and much more. ----The vehicle is in unprepared/untouched condition! Nationwide delivery possible for an additional charge. Errors and interim sale excepted. We are happy to consider your vehicle for trade-in. Financing / leasing possible even with no down payment! Do you have any questions? We are happy to advise you!

Condition: used, functionality: fully functional, travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, total height: 3,300 mm, total width: 8,800 mm, total length: 6,600 mm, table width: 2,200 mm, table length: 4,000 mm, overall weight: 10,500 kg, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, CNC cutting line with two interpolated 5-axis spindles, mounted on two opposing independent beams, with a belt table, for full-depth or incremental cuts on marble, granite, engineered stone and similar workpieces. Chjdpfoxdi Agex Addef

Condition: used, Weinig Unimat 23 E + Uniplan 23 planing line, including a return conveyor. An NC-controlled line for planing and profiling window scantlings, including glazing bead removal or other planing tasks, with automatic workpiece return to the operator. spindles: 4 + 2 working width: 230 mm working height: 120 mm spindle 1: 7.5 kW / 50 mm / 8,000 rpm spindle 2: 11 kW / 50 mm / 8,000 rpm Csdsx An R Tspfx Addjhf spindle 3: Common motor with spindle 2 / 50 mm / 8,000 rpm spindle 4: 7.5 kW / 50 mm / 8,000 rpm Spindle 1 Uniplan: 5.5 kW / 50 mm / 7,200 rpm Spindle 2 Uniplan: 5.5 kW / 50 mm / 7,200 rpm feed: 5-24 m/min service: PC Control Nexus NC axes: Unimat 2 & 3, Uniplan 1

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Codpsv I Akvofx Addjhf Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla high-level dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: good (used), Year of construction: 2009, For sale GIARDINA MOS/4PLUS paint line Chjdpfx Astxnp Nsddjf

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, It is a complete line for film recycling. It was bought together as complete line. Components - Washing line - Underwater shredder - Underwater grinder - Centrifuga Only available as a single item! Chjdpfsx Ddchex Addof

Year of construction: 2003, condition: good (used), Sorting line with 23 pockets and wood chipper Chodpfoxuh Sbox Addef

Condition: used, Breton Sample Line is the line for production of display samples in a wide range of materials and sizes The samples that can be produced on the Samples Line are suitable for marketing and exhibition uses. The line can process several materials: quartz, granite, marble, and porcelain stoneware. Chodoxdi Rwopfx Addef

Condition: excellent (used), Year of construction: 2008, 123 USED Koenig LAURIN 1000/800 + Mini Rex Futura Line. The line has been overhauled at a Koenig dealership and is ready for operation. TECHNICAL DATA: - Dividing and rounding weight: 25-130 g, - Bread types: round and elongated rolls, - Throughput: 2000-3000 pcs/h, - Sheet stacking: 60x80, 60x100, and 80x100. LABELLING AND STAMPING: - Kaiser roll - Sliced ​​roll (Schnytka) - Poznań roll - Daisy roll EXTERNAL DIMENSIONS (in cm): - height 180, - length 328 (with table open: 383), - width 153 (with the board flap open: 191) The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, rack oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices. Cjdpfx Adsw Su Dmjdshf

Condition: used, machine/vehicle number: 006500, Position 1: Vertical Storage Systems PRIESS-BMA DLS-CNC Codpfx Adjwucmvjdshf Position 2: CNC for Flexible Drilling PRIESS-BMA DLS-CNC Position 3: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC Position 4: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC Position 5: Brushing Machines PRIESS-BMA DLS-CNC Position 6: Roller Conveyors PRIESS-BMA DLS-CNC

Condition: used, Year of construction: 2010, BOTTERO COMBINED CUTTING LINE BOTTERO 341 BCS-J - Year: 2008 Max Dimensions: 6000 x 3210 mm Thickness: 2-25 mm | 2 + 0.38 PVB + 2 mm (545 VMXE-37) Description: Straight and shaped cutting table for monolithic glass with tilting table, sheet lifting arms, belts for transporting sheets, 3 + 1 breakout bars, LOW-E removal wheel, interconnection module for optimization with the Office. Codpfx Aexn Nxcjddohf Fixed table with belts for transporting sheets between monolithic and laminated processing. BOTTERO 545 VMXE-37 - Year: 2010 Max Dimensions: 3800 x 3210 mm Thickness: 2 + 0.38 PVB + 2 mm Description: Straight cutting table for laminated glass with three operation modes: Manual - Semi/Automatic. Features: Super-fast heating lamp, breakout, separation, blade cycle, crosspiece rotation, LOW-E removal wheel, interconnection module for optimization with the Office, and sheet descent arms at the end of the cycle.

Year of construction: 2013, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, Recent 75 Extruder - Re-pelletizing line Austrian-made, designed by engineers who left EREMA. The manufacturer was later acquired by EREMA. First commissioning: March 2013 Current operating hours: ~10,000 hours Usage history: 2013–2018: operated in a polyethylene film blowing plant, with technological waste 2018–2020: operated in a recycling plant, with irregular utilization 2020-2023: operated intermittently The line is for sale as a complete extruder, equipped with conveyor belts, and a metal detector. Materials processed by the extruder: LDPE, LLDPE, HDPE, PP, POM (According to the accompanying manufacturer's description, it is also suitable for granulating other materials.) COMPONENTS Agglomeration unit Stainless steel drum, diameter: 1000 mm Drive motor: AC 55 kW Chsdpfex Ddatox Addjf Main parameters of the extruder Screw diameter: 75 mm Screw drive: 65 kW Consists of 4 separate motors that are switched on depending on the load! Favorable power consumption! L/D ratio: 35 D Variable screw speed Touchscreen control panel

Year of construction: 2025, condition: new, I have a packaging machine for sale for bulk goods such as flour, sugar, powdered milk, spices, and much more. The packaging capacity is 5-30kg in paper or plastic bags. the price 13 500 EUR including 1- screw feeder 2- packing machine 5-30kg - Power supply: 2.5kW 400V 50Hz - Packaging accuracy: +/- 1% - Packaging speed: 200-400 bags per hour (at 10kg) - Set weight: 190kg Chsdpfx Aoxfaptoddof - Set dimensions: 1000x850x2300mm For highly dusty products, an additional dust extractor can be connected. Price 13 500 EUR - EXW terms INVITE TO INQUIRE

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, Csdpfx Asxw Tgpsddohf - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Kolbus BF 527 Year: 2004 - Automatic setting Csdpfx Adjx Dkk Sedehf - Co-Pilot with touchscreen - Product counter - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Technical details: Total force (nominal): 800 to Clamping surface (left-right): x mm Clamping surface (front-back): x mm Cjdsx Ag Epjpfx Addohf table surface area: 3200 X 2200 mm Total force (nominal): 2-3-4-5- Presse - 600 to. to table surface area: 2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6-ax

Condition: excellent (used), Year of construction: 2004, BOVONE (2004) Lamination Line Comprising: Tilting table, washing unit, positioning table, portal table, film roll storage, folding table, transport table, pre-lamination oven with pressing unit, transport table, and take-off tilting table. Glass thickness: 3–12 mm Maximum assembled panel thickness: 60 mm Minimum panel size with automatic loading and unloading (standard cycle): 400 x 700 mm Minimum panel size without automatic loading and unloading (small parts cycle): 550 x 300 mm Maximum panel size: 2200 x 4500 mm Approximate average assembly time per panel (glass/PVB/glass): 70–100 seconds Worktop height: 950 mm +/- 20 mm Compressed air consumption: minimum 6 bar, 400 l/h Demineralized water consumption (with water recycling system): 0.7 m³/8h Three-phase supply voltage: 400 V +10% Cjdpfswxxk Ejx Addshf Supply frequency: 50 Hz +2% Auxiliary voltage for cabinet lighting: 240 V single-phase Installed electrical power: 265 kW Estimated average electrical power consumption: 215 kW Compact installation area (U-shape) Autoclave ITALMATIC available