Used Errex Shelving System for sale (41,112)

Condition: used, operating hours: 1,386 h, lifting height: 4,600 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Still RX60-30L/600 electric forklift, year of manufacture: 2021, battery valid until 2026, hours: only 1,386!, previous owner: German Armed Forces, rated load capacity: 3,000 kg, lift height: 4,600 mm, fork length: 1,800 mm, scales, side shifter, triplex mast, free lift, STVZO lighting, including charger, in good condition, ready for immediate use. We will be happy to provide you with a leasing or financing offer upon request. Mr. Mihm (tel. ) will gladly assist you. Further information can be found on our website. Subject to errors and prior sale! Power steering, overhead guard = Further information = Year of manufacture: 2021 Lifting capacity: 3,000 kg Overall height: 225 cm Blodpfx Ahezwlynedsp Please contact Tobias Ebert for further information.

Condition: new, TRUMPF Femtosecond Laser System / Ultrafast Pulse Laser TruMicro 5070 Femto / TruMicro 5000 NEW / UNUSED – comprehensive laser system with system accessories For sale is a new and unused TRUMPF TruMicro 5070 Femto laser system with a TruMicro 5000 control/power unit and extensive accessories. The system was not used in production and comes from a project where the equipment was never put into operation. Technical data: Manufacturer: TRUMPF Laser GmbH Type: TruMicro 5070 Femto (FU06) Year of manufacture: 12/2018 Wavelength: 1030 nm Laser power: 300 W Pulse energy: 1.5 mJ Pulse duration: 0.3–15 ps Mains connection: 380–460 V / 3 AC + PE Frequency: 50/60 Hz Power consumption: 2.5 kW / 2.9 kVA Current consumption: 4.2 A at 400 V Protection class: IP54 Weight TruMicro 5070: approx. 380 kg Equipment: TRUMPF TruMicro 5070 Femto laser source TRUMPF TruMicro 5000 control/power unit Operator panel with emergency stop Industrial monitor TRUMPF control and electronics modules Beckhoff automation components Cognex component Optics and lens components Laser and light guide components Extensive power, control, signal and connection cables Pre-assembled connection cables Original TRUMPF documentation / manuals Further extensive accessories as shown in the pictures Application areas: Laser structuring Micromaterial processing Precision machining Industrial laser applications Research and development Scope of delivery: TRUMPF TruMicro 5070 Femto TruMicro 5000 control/power unit Control, electronics and optics components Cables, connection components and documentation Extensive accessories as shown in the pictures Bledpfxjz I N Tks Ahdsp Condition: NEW / UNUSED NEVER USED IN PRODUCTION Storage and packaging marks may be present. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), Technical data for the pallet racking system: Racking system: Jungheinrich Type: Esmena Blsdpfoz Ng E Uox Ahdsp Technical data for the installation: Number of racking rows: 1 Length per racking row: 53,433 mm Number of bays per racking row: 5 Number of levels including the base level: 2 Technical data for the capacity: Pallet spaces per bay: 19 Number of pallet spaces per row: 228 Total number of pallet spaces: 288 Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in the scope of delivery: 20x Pallet racking uprights, used Material color: blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System hole spacing: 50 / 50 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) Height: 6,000 mm Depth: 1,100 mm 114x Pallet racking beam, used Material color: yellow Box profile: 116 x 40 mm Beam type: GNA 116x40 SEG5 Hook: 5 hooks Clear span: 2,707 mm Max. load per beam pair: 2,400 kg, with evenly distributed load. 228x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams to prevent unintentional lifting 80x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 20x Shimming plate, used Material: Fully galvanized For leveling the racking uprights that are installed on uneven ground 1x Load plate with information on bay and frame loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), mileage: 2,52,835 km, power: 74 kW (100.61 HP), first registration: 04/2018, fuel type: diesel, tire size: 205/60R16, axle configuration: 4x2, wheelbase: 3,060 mm, fuel: diesel, color: silver, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro6, number of seats: 2, total length: 4,910 mm, total width: 1,800 mm, total height: 1,840 mm, loading space length: 1,960 mm, loading space width: 1,430 mm, loading space height: 1,190 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Fabric - Partition = Notes = Configuration: 4x2, Payload: 697 kg, Curb weight: 1463 kg, Gross vehicle weight: 2160 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 1300 kg, Tow hitch, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 4, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: Silver, Metallic, Rear view camera, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Engine power: 74 kW (99 hp), Number of cylinders: 4, Displacement: 1499 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 5, Power steering, ABS, ASR, Starter battery, Body type: Extended, Side panels, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat covering: Fabric, Seat adjustment: Manual, Air conditioning, Navigation, Parking distance control, Tow bar, Spare wheel, Tire type: Summer tires = Additional Information = General information Number of doors: 1 License plate: V-914-NP Axle configuration Tire size: 205/60R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Unladen weight: 1,463 kg Payload: 697 kg GVW: 2,160 kg Blsdpfoz Rv Egex Ahdep Functional Loading area height: 57 cm Maintenance APK (Periodic Vehicle Inspection): Valid until 04.2027 Condition Technical condition: Good Optical condition: Good Damage: None Number of keys: 1

Condition: used, Year of construction: 2016, Conveyor system for bulk solids Bjdpfx Ahoz R Auujdolp Bulk solids conveying system using a flexible screw. The system comprises a FLEXICON stainless steel hopper with a pyramidal bottom, support legs and capacitive level sensor. UTFS-S045-010-X tubular conveyor, approximately 2 m long, fitted with a 114 mm diameter UHMW polyethylene outer tube and flat profile flexible internal screw. Discharge head with DRP-02214T-05-X geared motor. The drive incorporates a 2.2 kW three phase motor operating at 1,425 rpm and 50 Hz, with IP55 protection. The system is ATEX II 3D T125 certified, suitable for operation in Zone 22 environments containing combustible dust. Designed for conveying pellets, plastic granules, powders and other solid products with minimal segregation of blended materials.

Condition: excellent (used), mileage: 5,31,928 km, power: 352 kW (478.59 HP), first registration: 03/2016, fuel type: diesel, tire condition: 50 %, axle configuration: 8x4, wheelbase: 6,800 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 9,360 mm, total width: 2,550 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 11,500 kg, Equipment: ABS, crane, electric window regulation, = Additional options and accessories = - Brake assist system - Power take-off (PTO) - PTO - Radio/CD player - Stability control - Sun visor = Remarks = Crane Number of hydraulic extensions: 3 Remote control: × Rotator: ✓ Clamshell bucket: ✓ Very beautiful and unique MAN TGS configured as a Z-Crane/Hook Lift with WIERDE WIDESPREAD SYSTEM and driving system!! In addition to the options already mentioned, it features: -Automatic -8x4 -3 steering axles -Widespread -Load capacity 22800kg -Palfinger epsilon Q180 z 95 tap -18 to -9.5 meter extendable -High seat -DRIVING SYSTEM TO BE OPERATED FROM ABOVE THE HIGH SEAT!!! -Hook arm 30 tons -Air conditioning etc etc Original Dutch car directly from the first owner! = More information = General information Year of construction: 2016 Registration number: 53-BGZ-3 Technical information Number of cylinders: 6 Engine capacity: 12.419 cc Axle configuration Front axle: Max. axle load: 10000 kg; Steering; Tyre profile: 50% Rear axle 1: Max. axle load: 10000 kg; Steering; Tyre profile: 50% Rear axle 2: Max. axle load: 11500 kg; Tyre profile: 50% Rear axle 3: Max. axle load: 11500 kg; Steering Weights Empty weight: 20.310 kg Carrying capacity: 22.790 kg GVW: 43.000 kg Max. towing weight: 50.000 kg Functional Crane: Palfinger Q180 Z 9.5 HOOGZIT, year of manufacture 2015, behind the cab Extendable superstructure: Yes Condition Bedpfxj Afhrme Ahdolp Technical condition: very good Damages: none Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: excellent (used), operating hours: 692 h, lifting height: 210 mm, free lift: 210 mm, fuel type: electric, fork length: 1,150 mm, fork width: 560 mm, total height: 1,300 mm, color: other, Year of construction: 2019 GVW: 492 kg Lifting capacity: 1.600 kg Blodpfs Ad R Aljx Ahdop Working height: 130 cm WEIGHING SYSTEM! NEW BATTERY CELLS 24V 3PzB 225Ah with filling system, Built-in 220V high-frequency charger, Fork size 1150 x 560 mm, Single fork wheels, NEW wheels,

Condition: used, Carl Zeiss Jena ULM 01-600C Universal Length Measuring Machine Manufacturer: Carl Zeiss Jena Model: ULM 01-600C Serial No.: 7104 Digital Readout: AE101 Description Carl Zeiss Jena ULM 01-600C universal length measuring machine with AE101 digital readout and a comprehensive set of original accessories. The machine comes from a former metrology environment and includes multiple fixtures, measuring attachments, tables, centers, and original storage boxes as shown in the photographs. Bsdpfx Aho Ady Iksdjlp The machine has been stored for a number of years and has not been tested recently. It is therefore offered in its current condition. Included Carl Zeiss Jena ULM 01-600C measuring machine AE101 electronic display unit Original measuring fixtures and accessories Various probes, supports, tables, and mounting equipment Original wooden storage cases Everything shown in the photos Stored unused for several years Not recently tested Sold as-is Calibration status unknown

Condition: excellent (used), functionality: fully functional, total height: 850 mm, overall weight: 30 kg, includes reference block and battery charger, plus 1 measuring tip in very good condition Bledpfxs Adklmj Ahdjp

Condition: excellent (used), Year of construction: 2005, 380 USED Miwe Athlet loading and unloading system. TECHNICAL DATA: - year of production: 2005 EQUIPMENT: - 4 trolleys with belts for proofing and loading bread The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the set. The price is a net price per set. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Bsdpfx Asy S Da Eohdjlp ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. Bedpfx Aezdqkrohdelp The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, 3D Systems Type: ProJet 3000 HD Uninspected ProJet 3D printers The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, these office-friendly 3D printers accelerate and maximize your return on investment (ROI). Printing Modes: HD - High Definition UHD - Ultra High Definition Net build volume (xyz) Bsdpfjzdnnujx Ahdjlp HD mode: 298 x 185 x 203 mm UHD mode: 127 x 178 x 152 mm XHD mode: n/a Resolution: HD mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD mode: n/a Accuracy (typical): 0.1 - 0.2% of part dimensions Accuracy depends on build parameters, part geometry, part placement, and post-processor settings Email notification: No Build materials: VisiJet® EX200 build material: Durable solid material with a long service life VisiJet® SR200 build material: Cost-effective, multi-purpose material. Available in natural, blue, or gray. VisiJet® HR200 build material: Available in blue, specifically developed for investment casting applications. Support material: VisiJet® S100 support material: Non-toxic wax material for melting the supports without manual intervention Power supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Dimensions (L x W x H) printer without packaging: 737 x 1215 x 1504 mm Weight: printer without packaging: 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and processing optimization tools Extensive part file editing tools Automatic support generation Job statistics Network compatibility: 10/100 Ethernet interface Hardware requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Operating system: Windows XP Professional, Windows Vista, Windows 7 Supported file formats: STL and SLC Ambient temperature: 18-28 °C Noise level

Condition: used, Item: inos iSENS laser sensors Item: inos iSENS laser sensors with control unit, cable, PC interface Condition: used Bodpezdn T Rofx Ahdolp Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Bosch Type: XR31-3 Description: Delta pick and place robot Manufacturer: Bosch Product type: Sigpack Systems XR31-3 Designation: Delta pick and place Year of manufacture: 2008 Pads/cycle (min): 185 Max. acceleration (g): 0.455 Cycle time (s): 0.32 Bjdpfx Aezdrzrehdjlp Working area (mm): 48 x 9.2 Maintenance rate: None Assembly time (h): 2.5 Scope of supply: 1 x Delta robot XR 31-3 Manz operating panel pendant P51 1 x Rotary gripper Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, TOX Type: TZ-VSN TOX – Full-Punch Riveting System The full-punch rivet initially separates all joining partners and then pushes the punched-out section out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, is expanding its range of products and services to include a future-oriented process. Full-punch riveting offers an additional mechanical sheet metal connection that is of great importance for lightweight construction and the joining of hybrid parts and assemblies. The rivet feeders, tongs, and tool holders are also designed to be so universal that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand tongs and TOX robot tongs. Press force: 55 kN Total stroke: 140 mm Rivet type: Diameter 5 x 4.6 Connection values Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Blsdozdtffjpfx Ahdop Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 029.700, Painting/drying booth from Luft- und Trockentechnik GmbH, type KSP 6-BT, manufactured in 1992. The system is suitable for painting and drying workpieces and features an integrated exhaust/extraction system. Bledpfxoz D Evye Ahdep Technical data: Manufacturer: Luft- und Trockentechnik GmbH Type: KSP 6-BT Year of manufacture: 1992 Manufacturer's number: 029.700 Usable volume: approx. 72 m³ Total volume: approx. 81 m³ Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum solvent quantity: 4,302 g/oven load The painting booth has dimensions of 6 x 4 meters. The system includes an exhaust duct with extraction via the roof. In addition, a suspension/transport system is located in the ceiling area, to which workpieces or painting racks can be attached and moved through the work area. Dismantling will be carried out by the buyer.

Condition: used, Year of construction: 2007, Overview This KHS Corvus is a skid-mounted cartridge filtration system (microfiltration), built in 2007 by KHS AG in Dortmund, Germany. Four stainless steel KHS cartridge filter housings for 40-inch cartridges are connected through a pneumatically operated valve manifold and controlled from the skid's own stainless steel control cabinet with Siemens PLC. The Corvus range is designed for clarifying filtration, cold sterile filtration and safety filtration of wine, beer and water ahead of the filler. This unit was last used for wine filtration in a bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Corvus - Year of manufacture: 2007 (filter housings 2006) - Machine type: cartridge filtration system (microfiltration), skid-mounted - Filter housings: 2 housings for 19 cartridges of 40 inch, 143 L each; 2 housings for 12 cartridges of 40 inch, 108 L each Bodpoz Hb Scjfx Ahdslp - Housing design ratings: max. 10 bar at up to 90 °C, max. 2 bar at 121 °C - Material: stainless steel - Overall dimensions: approx. 3,600 x 1,700 x H 3,750 mm Equipment - 4 CE-marked KHS cartridge filter housings - Pneumatically operated valve manifold with stainless steel piping - Pressure gauges and process instrumentation - Stainless steel control cabinet with Siemens PLC and pneumatic valve terminals - Stainless steel skid frame with mesh safety guarding Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: used, 1 used, partially overhauled universal milling head, System "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mount DIN 69871 ISO 50 Overhang 358 mm Max. speed range 3000 rpm Max. drive power 22 kW Mounting flange: Outer diameter Ø 306 mm Dimensions L x W x H 460 x 306 x 360 mm Weight approx. 150 kg Accessories / Special features: • 2 pivoting axis system "HURON" • Hydraulic tool clamping • For retrofitting to conventional, NC or CNC milling and panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Delivery time: approx. 2 weeks after order receipt The following work will be carried out during the partial overhaul: - 1 new gear pair - 1 new gear shaft - New bearings for the milling spindle and the gear shafts - New seals for the milling spindle and hydraulic tool clamping - New paint job The image is similar and shows a milling head that has already been overhauled. Siegfried Volz Werkzeugmaschinen Blsdpoz Adz Isfx Ahdjp Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: good (used), Year of construction: 2001, Demag Ergotech 250/560-840 Euromap size: 2500-840 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN Blodpfsz D Ttgjx Ahdep INJECTION UNIT (840) Screw diameter: 45 mm L/D ratio: 20 Injection pressure: 2402 bar Stroke volume: 358 cm³ Shot weight (PS): 320 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 80 kN Barrel heating power: 13.0 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 43 kW (50 kW with electric screw drive) Dry cycle time (EUROMAP 6): System: 2.35 s – 392 mm / 2.25 s – 392 mm; Concept: 2.25 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 10700 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.1 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: used, Year of construction: 2003, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Bedsz D U D Topfx Ahdelp Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg INJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l INJECTION UNIT (840) Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1946 bar Stroke volume: 442 cm³ Shot weight (PS): 400 g Max. dosing stroke: 225 mm Barrel heating power: 14.8 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 43 m³/h, filter area: 43 m², Equipment: CE marking, documentation/manual, a SCHUKO dust extraction system with 5 metal containers and a 43 m³ filter area; can also be sold as a complete set including the entire installation. Bjdpfx Aszzzg Sehdjlp

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Technical data: - Fan 1: 11 kW - Fan 2: 3 kW - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h Bodpfx Ajztvwishdslp

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 28 m², total height: 2,500 mm, total length: 3,150 mm, total width: 1,030 mm, overall weight: 900 kg, Wood chip extraction system, dust extraction system, self-cleaning filter, vacuum system – Hoecker Polytechnik brand. Model: Vacumobil JT 300 – with pneumatic cleaning of filter bags using compressed air during operation. Bjdpfxoz Nxxae Ahdslp Year of manufacture: 2009 Fan power: 7.5 kW Capacity: 6,000 m3/h Filtration area: 28 m2 Air return Dust tank capacity: 495 liters Equipped with an automatic fire suppression system Inlet diameter: 300 mm Stock number: 1172

Condition: used, RMS   Vibration exciter / Vibration testing system   RMS SW 6005 Vibration exciter, sold exclusively as a source of spare parts   For sale is a used vibration exciter from RMS Regelungs- und Messtechnik. Bodpjz Iqigefx Ahdslp   The device is sold explicitly and solely as a source of spare parts. Its functionality has not been tested. Operational readiness or completeness is not guaranteed.   Technical data:   Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Year of manufacture: 1983   Voltage: 30 V Current: 200 A Force: 11,770 N Vibration amplitude: ± 13 mm Velocity: 1.2 m/s Acceleration: 100 g   Weight: approx. 700 kg (estimated)   Equipment:   RMS vibration exciter SW 6005 Mounting surface with threaded holes Pneumatic vibration isolation Lateral spring elements Pneumatic components Control and connection housing Cooling/air connection with hose Transport/lifting eyes Solid base frame Existing mounting and supply components Accessories as shown in the pictures   Application areas:   Spare parts sourcing Maintenance of existing vibration testing systems Spare parts and assembly supply Rebuilding and repair projects   Scope of supply:   1 × RMS SW 6005 vibration exciter Existing mounting and supply components Cooling/air hose as shown in the pictures Accessories as shown in the pictures   Condition:   Used Optical condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested   Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No guarantee for functionality, operational readiness, or completeness.   Shipping or freight shipping possible. Subject to changes, errors, and prior sale.   We will gladly answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Bledpfx Ahez Iql Iedop Price: Upon request