Used measuring systems for sale (280)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 7525SE-0949-FA, measuring range X-axis: 2,600 mm, number of axes: 7, TECHNICAL DETAILS Axes: 7 Measuring range: 2.6 m Accuracy Acceptance temperature: 20 °C Humidity during acceptance: 50 % Permissible single-point deviation: 0.028 mm Determined single-point deviation: 0.010 mm Maximum permissible volumetric length measuring deviation: ± 0.039 mm Determined volumetric length measuring deviation: -0.018 mm Scanner Manufacturer: Hexagon Model: CMS108 Integration: Calibrated within the measuring arm Note: Can be used on the measuring arm with appropriate scanning software Note: Scanning software not included in the scope of delivery MACHINE DETAILS Design: Portable measuring system Weight of measuring system including transport case: approx. 40 kg External dimensions of transport case for measuring arm: approx. 1,350 x 550 x 350 mm Dimensions of tripod: approx. 750 x 750 x 750 mm Weight of tripod: approx. 75 kg Dimensions of scanner case: approx. 600 x 450 x 220 mm Weight of scanner including carrying case: approx. 6 kg Notebook size: 17 inches Note: The measuring arm was relabeled before the last calibration. Tedpezv Rhusfx Abtob EQUIPMENT - Hexagon ROMER Absolute Arm RA-7525SE measuring arm, 7-axis - Mobility Pack FP2-1503-FA with wireless computer connection - Transport case for measuring arm - Magnetic base - Test bar, length 700 mm - Test sphere, diameter 25 mm - Probe box with 3 probes - Probe with ruby ball, diameter 6 mm - Probe with ruby ball, diameter 3 mm - Calibration sphere, diameter 15 mm - Dust cover - Complete cable set - Calibration certificate for measuring arm, notebook Dell M6600 - PowerInspect 11 software including hardware dongle - Hexagon RDS software - Brunson 231 roll stand, height-adjustable - Height adjustment range of tripod: approx. 700 to 1,100 mm - Scanner Hexagon CMS108 - Carrying case for scanner - Calibration certificate for scanner Note: PowerInspect 11 is exclusively for tactile measurements and cannot be linked with a scanner. Note for packaging request: €250 for special pallet with cardboard construction and tripod on a Euro pallet.

Year of construction: 2011, condition: excellent (used), machine/vehicle number: F04-02-11-26923, Technical specifications Manufacturer: FARO Type: GAGE PLUS Year of manufacture: 2011 Certificate date: 02/04/2021 Revision: 28.1 Serial number: F04-02-11-26923 Accuracy: 5+8L/1000 (µm) The machine can be upgraded with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We will gladly prepare a detailed offer for you! Todpfsich H Rjx Abtob Note: Our offer is exclusively for professional customers! (Subject to changes and errors in the technical data, information, and prices, as well as prior sale!)

Year of construction: 2011, condition: excellent (used), machine/vehicle number: F04-02-11-26919, Technical Data Manufacturer: FARO Type: GAGE PLUS Year of Manufacture: 2011 Certificate Date: 03/02/2020 Revision: 28.1 Serial Number: F04-02-11-26919 Tjdpfxeich H As Abtsb Accuracy: 5+8L/1000 (µm) The machine can be modernized with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We will gladly prepare a detailed offer for you! Note: Our offer is exclusively for professional customers! (Subject to changes and errors in the technical data, specifications, and prices, as well as prior sale!)

Year of construction: 2003, condition: like new (used), machine/vehicle number: 67099.031501, Used Ravas floor weighing scale Ravas floor weighing scale, model: RWB ND CE, serial number: 67099.031501, year of construction: 02-06-2003, max/min: 1500/20 kg, e=dd= 1kg, dimensions: 1300 mm x 900 mm x 50 mm. with wall display. Benefits: Stainless steel scales can be safely used in the food or chemical industry. You can weigh palletized goods more easily than on a platform scale, because you don't have to climb the load on ramps. You can transport the scale easily, because it is equipped with wheels and handles You can sanitize these scales at any time, because they are IP68 certified You can easily weigh loads up to 1,500 kg on EUR1 pallets Price: 1.250 Euro + VAT, negotiable, FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. Tjdpfx Aei E Hxxjbtsb We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand KEYENCE VL 350 3D measuring system. Item for sale: 1 x KEYENCE VL 350 We can easily configure the machine to your requirements. Please feel free to contact us! Condition: Todpszxqxfsfx Abtob This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: new, functionality: fully functional, warranty duration: 24 months, input voltage: 240 V, measuring range X-axis: 280 mm, measuring range Z-axis: 350 mm, overall weight: 100 kg, workpiece weight (max.): 50 kg, Equipment: type plate available, High-end contour and roughness measuring system with air-bearing motion axes, up/down measuring function and X-sensing. Tedpfx Aowzlcajbteb Anytime optionally via software updatable functions: - Motorized Y-Supporting table Scope of supply: - Basic mechanics with integrated Y-adjustment table - Integrated control system - integrated gauging force regulation - software option roughness - Software option for measurement and evaluation of the following standards: DIN EN ISO 4287 (10/1998) DIN EN ISO 4288 (04/1998) DIN EN ISO 11562 (04/1998) DIN EN ISO 13565-1 (04/1998) DIN EN ISO 13565-2 (04/1998) VDA 2006 (07/2002) Stahl-Eisen-Prüfblatt (SEP 1940) - PC W11/64Bit; 24"TFT flat screen; - Compressed air unit consisting: Particulate filter 25µm/0.1µm, oil filters and water separator 2 precision pressure regulator mounted on base with stand - ConturoMatic Software; user manual - Software add-on for roughness calculation - Cable set - Protective cover, sturdy and water repellent (material), Commodity-Code 63079098 Description of the up down function: The scanning of surfaces in two directions is possible by the measuring direction switching function. This can be assessed without loss of the relationship to other scans from the same measuring process. Inside and external scans can be calculated to each other. This function is suitable without restrictions in automatic measurement programs. Additional evaluation possibilities are for example - Raceway diameters - Diameter - Thickness variation - Parallelism - Cone angle measurement - Calculation of pitch deviation - Thread testing (thread calculation software optionally) etc. Technical data contour and roughness measurement: Aerostatic linear bearings (X and Z) Measuring range Contour X 280mm (XL) 360mm Measuring range Roughness Z 350mm (XL) 550mm Suitable range Ra Ra from 0.08µm* Suitable range Rz Rz from 0.8µm* Resolution 1nm Sensing system optically incremental 1 point measuring in X direction (static) Accuracy +/-(0.85µm+L/100)µm* [L=mm] Measuring speed contour 0.1-3mm/s self-optimizing Measuring speed roughness 0.1-0,5mm/s self-optimizing Positioning speed up to 25mm/s Probing force contour 30mN Probing force roughness 7.5mN Table load 25kg weight: 96kg * According to our specified terms- Subject to change without notice

Condition: new, warranty duration: 24 months, measuring range X-axis: 300 mm, measuring range Z-axis: 370 mm, overall weight: 95 kg, Modular extensible Contour measuring system Anytime optionally via software updatable functions: - up-down-directions Z-Scanning - option Roughness measurement - motorized Y-Supporting table - axis of rotation for contour and roughness Scope of supply: - Basic mechanics with integrated Y-adjustment table - Integrated control system - PC W11/64Bit; 24"TFT flat screen; - CunturoMatic Software; user manual - Software option for measurement and evaluation of the following standards: DIN EN ISO 4287 (10/1998) DIN EN ISO 4288 (04/1998) DIN EN ISO 11562 (04/1998) DIN EN ISO 13565-1 (04/1998) DIN EN ISO 13565-2 (04/1998) VDA 2006 (07/2002) Stahl-Eisen-Prüfblatt (SEP 1940) - Protective cover 8988, sturdy and water repellent (material), Commodity-Code 63079098 Description of the up down function: The scanning of surfaces in two directions is possible by the measuring direction switching function. This can be assessed without loss of the relationship to other scans from the same measuring process. Inside and external scans can be calculated to each other. This function is suitable without restrictions in automatic measurement programs. Additional evaluation possibilities are for example - Raceway diameters - Diameter - Thickness variation - Parallelism - Cone angle measurement - Calculation of lead deviation - Thread testing etc. Technical data contour measurement: X-Measuring range 300mm Z-Measuring range 375mm Resolution 1nm Sensing system optically incremental Todpfogr Uzcex Abteb Inaccuracy +/-(0.9µm+L/100)µm* [L=mm] Measuring speed 0.1-3mm/s self-optimizing Positioning speed up to 25mm/s Gauging force regulation Table load 35kg Granite precision guides Technical data roughness measurement: Diamond tip Cone 60° R=2µm Z-Measuring range +/-500 µm Scope Ra > 0.08µm | Rz> 0.8µm Probing force 7.5mN Measuring speed 0.1mm/s * According to our specified terms- Subject to change without notice without fixing system

Condition: excellent (used), IM-6600 measuring system IM-6120 measuring head CMOS sensor: 6.6 MP monochrome 10.4" display LCD color monitor Field of view: φ100 x 200 mm Smallest display unit: 0.1 μm Telecentric transmitted light illumination (4-segment ring) Measuring accuracy: Wide-field measuring mode: ±5 μm High-precision measuring mode: ±2 μm Measuring mode with large field of view: ±7 +0.02L μm Measuring mode with fixed position: ±4 +0.02L μm Table: Tjdpfx Abezcd A Totjb X-axis: 100 mm Z-axis: 30 mm Load capacity: 1 kg

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 640 h, The configuration consist of - ATOS Compact scan (measuring head) - Picture creation PC7810.S - Industial stand - GOM Scan Software - GOM Inspection software Todpfx Absvpu U Ajtob The condition is new and barely used.

Condition: used, machine/vehicle number: 7F001-7, Optical multi-sensor measuring machine HEXAGON OPTIV CLASSIC 321 GL tp Year of manufacture: probably 2015 Machine number: 7F001-7 Availability: Immediately (by arrangement) Payment terms: Prepayment - by bank transfer Internal No.: OCU2 Can be inspected while powered on: YES Technical data: Metrology software: PC-DMIS Vision Vision sensor for non-contact measurement of smallest and precise components CCD camera with 6.5x motorized CNC zoom DC servo motors Modular probe changer: TESASTAR Linear guides in all axes Tedpfxszk I T Re Abtob Coaxial LED top light (white LED) LED back light (green LED + diffuser) Multi-segment LED ring light Maximum feed rate in the X, Y, Z axis: 160 mm/s Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Measuring accuracy in the X, Y axis (optical sensor): Ex, Ey = (1.6 + L/250) µm Measuring accuracy in the XY axis (optical sensor): Exy = (2.0 + L/250) µm Measuring accuracy in the Z axis (optical sensor): Ez = (3.9 + L/200) µm Measuring accuracy in the X, Y axis (scanning probe system): Ex, Ey = (2.0 + L/250) µm Measuring accuracy in the XY axis (scanning probe system): Exy = (2.5 + L/250) µm Measuring accuracy in the Z axis (scanning probe system): Ez = (2.9 + L/200) µm Measuring volume optical sensor X 300 mm Y 200 mm Z 150 mm Measuring volume tactile sensor X 230 mm Y 200 mm Z 150 mm Scope of supply: - As shown in the pictures Note: The rolling shutter cabinet on which the PC is placed is not included in the scope of supply. Dimensions & weights: Installation dimensions L x W x H approx.: 705 x 986 x 890 mm Weight approx.: 170 kg ⚠️Additional notes: ►The goods are sold with exclusion of any warranty ►Technical data without guarantee ►Subject to prior sale ❗The sale of the goods is exclusively to business customers❗

Condition: used, Year of construction: 2015, Year of construction 2006 CNC controlled video measuring device Measurement software MeasureMind 3D Touch Probe TP200 PC system and 2 x TFT monitor Reflected light, transmitted light, Xoaxiallicht LED ring light Further equipment, software modules, probe changers and accessories optional. Installation and commissioning, individual training possible with us in Remscheid or at your location. Tsdpozvl Suofx Abtob

Condition: like new (used), Year of construction: 2023, Shimadzu HPLC + Preparative HPLC – Complete System We offer a complete Shimadzu liquid chromatography system, consisting of an analytical HPLC and an extended preparative system. The entire system is from 2023 and is unused. Main Equipment * Shimadzu LC-2050C 3D – High Performance Liquid Chromatograph * Year of manufacture: 2023 * Integrated HPLC system with PDA detector * Cat. No.: 228-65822-58 * Shimadzu RF-20AXS – Spectrofluorometric Detector * High-sensitivity fluorescence detector * Year of manufacture: 2023 * Cat. No.: 228-65305-58 Preparative System Tsdpfx Aszv Salobteb * 2 × Shimadzu LC-20AP Preparative Pump – flow rate range 0.01–150 ml/min * Shimadzu SPD-40V UV-VIS Detector * Shimadzu FRC-10A Fraction Collector * Shimadzu CBM-40 System Controller * Preparative gradient mixer * Preparative flow cell – 0.1 / 0.2 / 0.5 mm * 7725i manual dispenser * Holder for preparative columns * Set of preparative tubing * LabSolutions Lite LC * Computer set Additional Equipment The set also includes a fraction collector head, vial and tube racks, holders, 350 3.5 ml tubes, 200 Shimadzu 20 ml tubes, Vial Kit 4-SV, power cables, and other accessories. Manufacturer: Shimadzu Year of manufacture: 2023 Condition: unused Configuration: Complete analytical and preparative HPLC system with UV-VIS, PDA and fluorescence detectors, automatic fraction collector, software, computer and accessories.

Condition: used, Year of construction: 2022, functionality: fully functional, input voltage: 230 V, total width: 996 mm, total length: 1,311 mm, total height: 2,633 mm, overall weight: 250 kg, input frequency: 50 Hz, Equipment: documentation/manual, The InspecVision Planar P70.20 is a high-speed, non-contact 2D optical measurement and reverse-engineering system. Machine type: 2D optical inspection and measurement system Maximum part length: 1,000 mm Maximum part width: 667 mm Maximum part thickness/height: Up to 350 mm* Maximum part weight: 50 kg, evenly distributed Measurement accuracy – length/width: ±20 / ±40 µm Point spacing / resolution: 0.18 mm Measurement speed: Less than 0.25 seconds SurfScan resolution: 0.15 mm Camera: High-resolution industrial camera Lighting: LED Software: InspecVision inspection, SPC, reporting, and reverse-engineering software CAD comparison: DXF comparison and dimensional inspection Reverse engineering: Available Power supply: 230 V, single phase, 50 Hz Maximum power consumption: Approx. 4 A Tjdpfxozvxg Ee Abteb Operating temperature: 10–30 °C Computer interface: USB 2.0 / USB 3.0 Approximate machine dimensions (W × D × H): 1,311 × 996 × 2,633 mm Machine weight: Less than 250 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A25-S5-22-48417, input voltage: 230 V, overall weight: 51 kg, Dear Sir or Madam, We are selling: FARO Quantum S MAX 2.5 m, year of manufacture 2022, fully functional, current calibration available, including CAM2 Probing Edition with an unlimited CAM2 license and USB dongle, complete with all accessories. - Arm reach: 2.5 m - Number of axes: 7 Sale only to business customers; no warranty. Equipment: - Calibration kit - Transport case - Mounting plate - 3 mm and 6 mm iProbes - USB cable - Power cord 230 V - Rechargeable battery - Mount G3+, magnetic holder 150 mm - Measuring software CAM2 Probing Edition 1, unlimited license for CAM2 - USB dongle, single-user license Tsdezxn E Nepfx Abtjb Please contact us if you have any questions.

Condition: used, Surface measuring instrument Mahr Perthometer S2 Used, as shown in the pictures Todpfx Abozkl Dyetsb From stock (may have storage marks) Please refer to the pictures for further technical information Scope of delivery as shown in the pictures With invoice The invoice will be enclosed with the shipment. Payment method Bank transfer Self-collection Information about bank details, payment terms, etc. will be sent to you by email. W120

Condition: used, functionality: fully functional, Geosig Accelerometer with recorder GeoSIG GMS plus Recorder model no GMSplus-IP67 Tjdpeq S Uz Usfx Abtsb Geosig Accelerometer/sensor Model AC73 Type HHV Vibration sensor and Recorder including accessories as shown in the photos. This Vibration sensor and Recorder is used. We have a stock of approximately 100 used sensors and 100 used recorders available.

Condition: new, Year of construction: 2024, Stock items available for immediate delivery consisting of: Tsdpsfnp Swsfx Abtob ᐳ Stop rail, 3 m long ᐳ 2 complete stop units ᐳ 1 measuring scale, right to left ᐳ 1 measuring scale, left to right ᐳ Fastening screws - The wooden base strip, 50 x 45 mm, onto which the stop rail is screwed, is not included in the scope of delivery.

Condition: used, For sale is a modular test and measurement system from National Instruments, based on the PXI Express platform. The system was originally purchased in 2016 and subsequently expanded in 2018. The device can be used for test automation, multi-channel data acquisition, quality control, GigE camera support, and communication with industrial devices. Current configuration: National Instruments PXIe-1085 – 18-slot PXI Express 3U chassis with a system throughput of up to 24 GB/s, National Instruments PXIe-8880 – embedded PXI Express controller with a 64-bit Windows 7 operating system, 2 × 8 GB RAM expansion for the PXIe-8880 controller, 6 × National Instruments PXIe-8234 – dual-port GigE Vision modules designed for image acquisition from industrial cameras, Todpozv Idtsfx Abtob National Instruments PXIe-4499 – 16-channel, 24-bit module for sound and vibration measurements, 204.8 kS/s, with IEPE and TEDS support, a complete set of two InfiniBand–BNC cables for the PXIe-4499 module, National Instruments PXIe-4357 – 20-channel, 24-bit temperature measurement module for RTD sensors, National Instruments TB-4357 – terminal block for the PXIe-4357, National Instruments HDD-8261 – 6-disk, high-speed SSD data storage module with a total capacity of 2.9 TB according to the original configuration, National Instruments PXIe-7846R – reconfigurable I/O module with a Kintex-7 160T FPGA, equipped with 8 analog inputs, 8 analog outputs, and 48 digital I/O lines, National Instruments SCB-68A – shielded terminal block, shielded 68-pin terminal block for R Series DIO and HSDIO devices, 2 m SHC68-68-RMIO cable, shielded 2 m R Series High Speed Digital Cable, power cable. Additionally added: NI PXI-6224 M Series Multifunction DAQ – 32 analog inputs and 48 digital I/O lines 12 × NI 8234 Dual Gigabit Ethernet Controller for Windows – a total of 24 Gigabit Ethernet ports NI PXI-8433/2, 2000 V Isolated RS422/485 – isolated, dual-port RS422/RS485 interface Possible applications: - Multi-camera GigE Vision systems - Automated quality control - Testing of electronics and components - Acquisition of analog and digital signals - Communication via Gigabit Ethernet, RS422, and RS485 - Research and development workstations - Automation of production tests The devices were purchased as part of a single, complete National Instruments system. Original purchase documentation is available for review. The system was used in research and development activities related to electronics, vision systems, metrology, and automation. Technical and visual condition as shown in the photos. Detailed catalog numbers and serial numbers of individual devices can be provided upon request. Sale of the complete system is preferred. Sale of selected modules is also possible after prior arrangement.

Condition: new, ID 376 846-E8 SN 17 404 874 Type: Rotary encoder ROD 426 2500 03S12-03 Condition: New Stock number: 2065-T503 Tedpfx Aoylc Dhsbtjb HEIDENHAIN rotary encoders are used in industrial applications to measure the and position of axes in machines, robots, machine tools and other automated systems. and other automated systems.

Condition: used, Year of construction: 2016, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Coordinate measuring device for simple inspection of components directly on the production floor. Measurement routines can be visually displayed step by step for untrained operators. The device was purchased in 2016 but was used only briefly as it proved unsuitable for the intended application. It is in nearly new condition and comes in its original packaging. Manufacturer: Keyence Model: XM-1000 Year of Manufacture: 2016 Todpfx Abszbvqyeteb Measuring range: 300 x 250 x 150 mm Repeatability: ±3 µm Measurement deviation: ±8 µm Equipment: - XM-1000 measuring system - XM-1500 measurement computer - XM-P1000 measuring probe - Several probe heads / balls - Documentation - Original packaging

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 113018006121, Equipment: documentation/manual, type plate available, Optical measuring system with the following objectives: 1900WD30, 800WD17, 400WD19, and 150WD11. Todpfx Ajzwuxaebtjb Rotary unit with EROWA clamping system. Ring light, compatible with all objectives. Automated pick-and-place system with 24 positions, featuring the latest software packages: MetMax 4.0.1, Alicona Laboratory Measurement 11.0.1, and Inspect 2023. 2 Inspect licenses available as floating licenses. Automation Manager.

Condition: good (used), MASS FLOW TRANSMITTER-PD340 Tsdpfxjhcpwtj Abtob Item: D_1596-Flowmeter-PD340, Digital flow meters Mass Flow Transmitter with or without display (New or used) PD340. Ø 1" - 4". For more informations please contact us!

Condition: excellent (used), functionality: fully functional, Very good leak calibration device in a case. And other measuring cases available upon request! Tjdpfxjxz R Ape Abtob

Condition: like new (used), For sale is a Renishaw XL80 laser interferometer system for machine calibration, suitable for linear and rotary axes, in very good condition. The measuring device is fully functional and has been used very little. It was manufactured in 2022. The device has an accuracy/deviation of 1 nm, and the software is, of course, included in the offer. If you have any further questions, please do not hesitate to contact me. Tjdpfx Aezrgvmebtob

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Todozdz S Tspfx Abtob Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i