Used Ess Synmag 4000 for sale (75,731)

Condition: used, Year of construction: 2008, machine/vehicle number: 0108.0272, Lg.no. 24189 Technical data: - Welding current 330 A 40% ED - 220 A 100% ED - Welding current adjustable in 4 coarse + 6 fine steps 30 A / 15.5 V - 350 A / 24 V - 4 roller wire feed infinitely variable 1.2 - 18 m/min - 2 cycle + 4 cycle regulation - Hose package approx. 4 running meters Itedetp Id Uopfx Aanjr - Ground cable - Pressure reducer - Connection 400 V / 50 Hz - Space requirement approx. W 500 x H 1000 x D 1000 mm - Weight approx. 140 kg

Year of construction: 1999, condition: excellent (used), We are offering a Heizbosch natural gas boiler. Type LLR 4000 Boiler with a 4 MW output Year of manufacture: 1999 Flow temperature: max. 120 °C, Pressure: max. 6 bar Water capacity 5720 l It has only been used very rarely, primarily for cleaning two adjacent biomass boilers. Available from the end of March 2026 Ijdpfx Asxxa Ivoanjtr

Condition: used, Year of construction: 2020, CNC Gantry Plasma Cutting Machine with Skew Rotator Bevel Unit Manufacturer: Messer Model: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 12 m Track width: 4,000 mm 1 ALFA oxy-fuel torch 1 plasma torch with Skew Rotator Bevel Unit Power source: Hypertherm XPR300 Cutting capacity: 50 mm piercing 80 mm separation cut Extraction table: Beuting without filter system Software: Omniwin with Bevel 161225 Iodex Dlwmspfx Aanjtr

Condition: used, Year of construction: 2020, controller model: , _____ Description: Year of manuf. : 2020 Technical specifications Working surface:2000 mm x 15000 mm Ijdpfjxw A Icjx Aanetr Total width:5070 mm Height:1980 mm equipment :-Global Control S with 15" colour touchscreen :-Joystick and handwheel for Global Control S panel :-Cooling for the control cabinet :-Laser diode :-Drives up to a maximum of 35 m/min. AC :-Heat shield without air cooling :-Runway for double-sided longitudinal drive HEB :-OmniFlow oxyfuel supply up to 70 m'/h (gas flow control) :-ALFA machine cutting torch (internal ignition) :-Smartlifter 300 :-SensoMat ARKI :-Full addressing of gases :-Light barriers :-Safety device for wheel housing (foot switch)

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 19100 € 366.72 € 4000 kg Itedpfx Ajwirz Ejanor 1300 mm 450 - 550 mm 600 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 4000 600 M D1300) € 21.800,--

Condition: good (used), Year of construction: 1995, nominal heat output: 3,850 kW (5,234.54 HP), Equipment: hot water, Boiler output: 3,850 kW, operating temperature: 185-190 °C, flue gas flow rate: 19,000 m3/h, fuel type: bark, sawdust, wood chips Itsdpfov R E Iijx Aanor A ROTHEMÜHLE electrostatic precipitator is also available.

Condition: good (used), Year of construction: 2008, CNC portal plasma cutting machine Manufacturer: Messer Model: Multitherm 4000 CNC control: Global Control Plus Year of manufacture: 2008 Retrofit: 2019 Isdpeiff Dajfx Aanetr Extraction table: 2,000 x 3,000 mm 1 ALFA oxy-fuel torch 1 plasma torch Power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC In-house technicians available for installation, commissioning, and training! All spare parts in stock.

Condition: used, Year of construction: 2020, controller manufacturer: Sonstige, controller model: Global ControlS, _____ Itodpfexv Nk Uox Aaner Description: Year of manuf. : 2020 technical data Working area:3000 mm x 6000 mm Total width:5070 mm Height:1980 mm equipment :-Global Control S with 15" colour touchscreen :-Joystick and handwheel for Global Control S panel :-Cooling for the control cabinet :-Laser diode :-Drives up to a maximum of 35 m/min. AC :-Heat shield without air cooling :-Runway for double-sided longitudinal drive HEB :-OmniFlow oxyfuel supply up to 70 m3/h (gas flow control) :-ALFA machine cutting torch (internal ignition) :-SmartLifter 200 :-SensoMat ARKI :-Full gas addressing :-Light barriers :-Wheel housing safety device (foot switch)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 33,500 mm, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, BYSTRONIC / LENHARDT 4000 x 1600, IGU Line – Double Gas Press + Robot Autom. IGU Glass Production Line, h=1,6 m Double Gas Press, Sealing Robot | Right – Left Itedpfx Aajxf Hm Sjnsr Max. glass sizes: 4000 x 1600 mm, Year: 2004 – Washing and Drying Machine (8 brushes) with Inlet and Outlet Conveyor, Blower, – Frame Mounting Station, – Autom. Double Gas Press, – Sealing Robot, – Inlet and Outlet Conveyors. In good working condition. Inspection is possible by appointment. Available: NOW

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight of the machine ca. 2,5 t - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The basic equipment foot is available in various lengths. Isdeibw Sxopfx Aanstr The load capacity of the foot is 2,000 kg.

Condition: used, Clamping plate, welding table, welding table, straightening plate -Width: 1210 mm -Length: 4000 mm -Height: 830 mm -Plate thickness: 30 mm -with steel frame -Number: 2x plates available Itsdpsb Elz Tofx Aanor -Price: per piece -Weight: 1400 kg/piece

Condition: like new (used), functionality: fully functional, Year of construction: 1997, control type: CNC control, GASPARINI PRESS BRAKE 4000 X 300 CNC DELEN SA 24 E MOD. PSG300/4000 USED MACHINE INTERNAL CODE: SVR 364 Isdpfxoxy Sn Dj Aanstr

Condition: used, This listing is for the Hanwell 4000 Wireless Transmitter The unit is in full working condition and is ready for immediate release Key Features: Single & Dual Channel Options: Choose between single or dual thermistor channels to suit your monitoring needs. ​ Isdpfx Aasxv D H Renstr LCD Display: Equipped with an LCD display showing real-time data readings and battery life. ​ Temperature Range: Measures temperatures from -40°C to +60°C, accommodating various storage conditions. ​ Long-Range Wireless Transmission: Utilizes low-power radio technology with a transmission range of up to 3 km over open ground. ​ Battery Life: Powered by a 3.6V AA lithium battery​ Memory Capacity: Stores up to 100,000 readings for single-channel units and 50,000 readings per channel for dual-channel units. ​ Applications: Ideal for monitoring temperatures in fridges, freezers, and chillers. ​ Compatible Sensors The transmitters are compatible with various thermistor probes, available separately, to meet specific monitoring requirements. ​ Specifications at a Glance Feature Specification Dimensions 110 x 80 x 35 mm Weight 200 grams Power Supply 3.6V AA Lithium Battery Battery Life Up to 2 years Operating Range 0°C to +60°C (non-condensing RH environment) Storage Range -40°C to +60°C Accuracy ±0.1°C Radio Frequency 433–458 MHz (country-specific) Radio Power 10 mW Radio Range Up to 3 km over open ground IP Rating IP30

Condition: like new (used), Year of construction: 2014, 4 meter width Nominal pressure 1250 kN CNC Back Gauge Itodpfelqwvksx Aanor Quick Change Tooling

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 201805015, working length: 4,100 mm, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, total width: 1,550 mm, total length: 3,560 mm, total height: 2,850 mm, pressing force: 185 t, overall weight: 18,000 kg, space requirement height: 3,440 mm, table length: 4,100 mm, installation height: 500 mm, Lightly used press brake in excellent condition. 185 tons, 4 meters, 6 axes No. 4 rear backgauges, No. 2 retractable pneumatic supports ESA 660W CNC LAG press brakes represent the perfect combination of Italian technological innovation, meticulous attention to detail and design, and the substantial production capabilities of China. These strengths, combined with the highest quality European components, allow LAG to offer its customers press brakes, shears, and inserting machines with the best price-to-performance ratio on the market. Iedpfx Aajwync Hjnjtr This is the top-of-the-line model, equipped with accessories and automation for highly profitable performance. Main standard configuration of the G-TOP press brake: - G-FLEX crowning compensation system - G-CS active crowning system - 6 axes (Y1-Y2-X-R-Z1-Z2) - Dual pump system: one main power pump and one pump dedicated to the crowning system - DSP AP safety system - Touchscreen control panel on the electrical cabinet - Sliding front supports - Touchscreen CNC control - Reference 4-axis rear backgauge system, model GRP-4 (X-R-Z1-Z2)

Condition: used, Year of construction: 2023, operating hours: 41 h, functionality: fully functional, machine/vehicle number: 3617, Model/ Type: RUF 15/4000/70 Ma.Nr. / Ma.No.: 3617 Year of construction: 2023 Drive motor: 15 kW Throughput capacity up to max.: 450 kg/h (depending on material) Press pressure: approx. 4000 kg/cm² Briquette size: 70mm Operating hours / Running hours: approx. 41 h approx. 41 h Warranty: 12 months after delivery 12 months after delivery Verfügbarkeit/ Availability: approx. 8 weeks after receipt of down payment approx. 8 weeks after receipt of down payment Isdpfxet Sgrzj Aanetr Details: + Siemens TP 700, Siemens S7-1200 + Hopper extension with grid / Hopper extension with grid + Elektrische Emulsionspumpe / Electrical emulsion pump + Sprüheinrichtung / Spraying device + Inspection door in hopper / Inspection door in hopper

Condition: excellent (used), All stainless steel Mixer Grinder Size150 mm mince plate "56 head" Hopper capacity 200 litres Single interrupted ribbon mix arm Main motor 15 Kw - 2 speed Mix motor 1.5 Kw Safety interlocked lid Ijdpfx Aaewwkk Ienstr In good working order

Condition: refurbished (used), functionality: fully functional, The Sepamatic 4000 DPC (Desinewer/Separator) is a powerful, industrial-scale machine designed to efficiently separate soft tissues (meat, poultry, fish) from sinews, gristle, cartilage, and bone fragments. This process yields a high-quality, high-protein mince or emulsion base. Itjdpfoxxva Iox Aaner Performance & Yield High Yield Separation: Engineered to maximize the recovery of high-quality meat proteins from trimmings, tendons, and less valuable cuts. Low-Pressure Operation: Sepamatic machines typically use a low-pressure desinewing process to gently separate tissues, which minimizes friction and prevents temperature rise, preserving the natural structure, color, and quality of the final product. High Throughput: The "4000" designation suggests a high-capacity machine, ideal for continuous, large-scale industrial operations. Operational Benefits Improved Final Product Quality: By removing sinew and gristle, the 4000 DPC significantly improves the texture and consistency of final products like sausages and restructured meats. Versatility: Capable of processing various raw materials, including beef, pork, poultry, and fish, requiring only a change of screen or configuration. Hygienic Design: Constructed entirely from robust stainless steel (implied by the manufacturer), ensuring durability and simplified washdown procedures that meet stringent food safety requirements. Reduced Waste: Converts what would typically be considered low-value trimmings into high-value product, improving overall profitability.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Block Gluing Press STROMAB SL-1 4000 Maximum gluing length: 4000 mm Maximum gluing height: 1350 mm Maximum gluing width: 150 mm Number of hydraulic clamps: 8 pcs Itjdpsx Nahmsfx Aansr Number of gluing sections: 4 Number of frontal clamps: 4 pcs Hydraulic pump motor: 2.2 kW Piston rod diameter: 45 mm Piston stroke: 150 mm Maximum pressure: 180 bar Adjustable gluing height CE certificate Year of manufacture: 2008

Condition: used, tank capacity: 4,000 l, GENERAL Design: vertical Remarks: Tanks slightly out of round; outlet is lower than tank bottom (consider during installation); cut-outs in the lid; nameplate only present on 2 tanks; 1 tank with ball valve (see photos) Internal diameter: 1,590 mm Total height: 2,200 mm Top: bolted lid with folding segment Location: Bremen Nameplate: Volume: 4,000 liters Cylinder wall thickness: 3 mm Itjdpsxqdnqsfx Aanor Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,000 mm Last application: cosmetics (shampoo) VESSEL Bottom: flat-bottomed EQUIPMENT Outlet: present Note: slight residues Outlet: 48 mm TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3 mm Top wall thickness: 1.5 mm

Condition: used, Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures approximately 1,800mm diameter x 2,450mm straight side. Internal rated 6 bar/full vacuum design pressure at 130 deg.c. External stainless steel coil jacket rated 9 bar/full vacuum design pressure at 185 deg.c. Unit has external stainless steel cladding. Has top entry stainless steel 2-tier, 4-blade pitched blade agitator driven by motor/gearbox. Unit has (4) stainless steel internal wall mounted baffles. Specifications: Capacity: 4,000 L Diameter: 1,800 mm Straight Side: 2,450 mm Material of construction: Stainless Steel Type Of Heads: Welded Dished Top and Bottom Iodpox Hwbxjfx Aanstr Internal Pressure: 6 bar Jacket Pressure: 9 bar Internal Temperature: 130°C Type of stainless: Stainless Steel Legs/Lugs: 4 Lugs

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Holac Cubixx LP 120 Dicer / slicer including Holac GFA-5-4000 conveyor belt specialy made for hot products up to 90 degrees. Year of construction 2017 very little used and low running hours! Itodpfxjxwb Dce Aanor

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, We are selling this machine as we no longer have any use for it. Price is VHB we need the space. English version below: Itsdpjtgxyqefx Aanor We sell this machine because we don't use it anymore and we need the space. The price is open to discuss.

Condition: like new (used), Year of construction: 2019, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 2196028, Gerätetyp: Vollautomat Betriebsart: elektrisch Material: Edelstahl Itodpfov Acm Tsx Aanjr Produktkennzeichnungen: Hersteller-Art.-Nr: VA 4000/AT Gewichtsinfo: Gewicht: 130 kg Geräteanschluss: Anschlusswert: 600 Watt Netzspannung: 400 Volt Schnittstärke maximal: 10 mm Messergröße: 330 mm Länge (Breite): 1270 mm Tiefe: 853 mm Höhe: 1330 mm

Condition: good (used), functionality: fully functional, operating hours: 12,921 h, Used AMADA press brake Model: HFP220-4S Capacity: 4000 x 220T Number of axes: 8 axes CNC: AMNC, retrofitted by AMADA in 2022 Fast working speed: 100 mm/sec Ram stroke: 200 mm Electrical power: 67 amps, 38.5 kW motor Ijdpfx Aoxwtvdsanetr Operating hours: 12,921h Machine tested and inspected by AMADA – report with photo Video on request Machine loaded onto truck