Used Fast Radial for sale (3,768)

Year of construction: 2026, condition: new, Cutting height 195 mm saw-blade dia. 550 mm Fsdjyk Iarspfx Afpopi Motor output 5,5 kW

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Fpedpfeyxw Ddsx Afpoi Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: excellent (used), Year of construction: 1955, Drilling capacity in steel St 37 Ø 65 mm Fpjdpfetwzk Djx Afpji Drilling capacity in cast iron Ø 75 mm Spindle mount MT 5 Throat 1250 mm Spindle stroke 400 mm Spindle speeds 22.4 – 1800 rpm Feed range 0.056 – 0.56 mm/rev Column diameter Ø 300 mm Motor power, 2-stage: 3.6 / 4.8 kW Clamping surface, base plate 1320 x 1000 mm Dimensions L x W x H (with motor!) 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!) 2250 x 1000 x 2800 mm Weight 5100 kg Accessories / Special features: • Cube table L x W x H 650 x 500 x 500 mm • Central clamping • Feed • Right-to-left travel • Motorized up and down travel • High speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2022, functionality: fully functional, The tool holder is completely new and still in its original packaging. There is a second one, which is used but shows no signs of wear. (see picture) Spindle MTSK-40 Gear ratio 1:1 Max rpm. 6000 Maximum torque [Nm] 50 External cooling Yes Internal cooling Yes Internal cooling P=30 BAR Fodpfeuzwutex Afpopi The holder can also be used for the following CMZ machines. CMZ - TA15M/Y/MS/MY/YS 15 PCS. CMZ - TX52 Y2 QUATTRO CMZ - TX52 Y2 TWIN CMZ - TX66 Y2 QUATTRO CMZ - TX66 Y2 TWIN CMZ - TX66 Y3 CMZ - TA20M/Y/MS/MY/YS 15 PCS. CMZ - TA25M/Y/MS/MY/YS 15 PCS. CMZ - TA30M/Y/MS/MY/YS 15 PCS. CMZ - TTL 52 CMZ - TTL 66 CMZ - TX52 Y3

Condition: good (used), Year of construction: 1996, Radial drilling machine type Reform RB50x12 for sale in good condition. Capacity: Max. 50mm in steel. Fpedpfxjxftk Ro Afpei Arm lenght: 1250mm Spindle distance to column min: 350mm Taper: MK5 Stroke: 315mm Spindle speeds: 25 – 2000 rpm, in 16 steps Feed rates: 0.04-3.2 mm/rev Main motor 3kW Weight: 3000kg Dimensions: 2150x1060x2840mm Machine clamps hydraulically, equipped with emergency stop. Under power in our warehouse.

Year of construction: 1995, condition: good (used), Radial fan from Venti Oelde with inlet silencer. !! Performance curve included as an image!! Volume flow: 46308 m³/h Pressure increase: 4830 Pa / 48.3 mbar Weight: 2750 kg Fpedpfxed Nqlco Afpji Temperature: 30°C Speed: 1480 rpm Motor: VEM 415 S4 Power: 110 kW

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 39200 € 748.72 € 50 mm MK 5 350 - 1.600 mm 56 - 1.450 (12) U/min Stahl/Guß: M40/M50 2670 mm 1120 mm 2410 mm 3300 kg 465 - 1.420 mm 0,06 - 0,2 (3) mm/min 3.7 kW 320 mm 270 mm 2.550 x 970 x 200 mm 1,5 kW 630 x 500 x 500 mm 2760 mm 0,75 kW left/right rotation automatic feed Fpsdpfeynmt Sjx Afpoi drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 30100 € 574.91 € 50 mm MK 5 360 - 1.250 mm 44 - 1.206 (12) U/min Stahl/Guß: M40/M50 2060 mm 995 mm 2240 mm 2300 kg Fedpjynmt Eefx Afpspi 441 - 1.345 mm 0,06 - 0,2 (3) mm/min 3.7 kW 300 mm 270 mm 1.785 x 785 x 190 mm 0,75 kW 635 x 520 x 420 mm 2645 mm 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH

Condition: good (used), Drilling capacity: Ø 50 mm Spindle fitting: MT5 Spindle speeds: 18 - 2,000 rpm Spindle stroke: 400 mm Maximum horizontal arm travel: 1,250 mm Maximum spindle to floor plate distance: 1,600 mm Equipped with: - Thread-cutting device - Drilling table Machine weight: 4,500 kg Machine dimensions (LxWxH): 2,800 x 1,000 x 3,500 mm Fpodpfx Afsy Ia Azepei

Condition: used, Year of construction: 1986, bore capacity in steel (diameter) 50 mm bore capacity in cast iron GG 20 70 mm arm length 2000 mm morse taper MK 5 Spindle Speed 28-1.250 U/min. spindle stroke 330 mm total power requirement 8 kW weight of the machine ca. 5.500 kg Fsdpfx Afoyv N Eujpepi

Condition: used, Year of construction: 1996, bore capacity in steel (diameter) 60 mm arm length 1600 mm workpiece height max. ca. 1300 mm borehole diameter in Stahl 80 mm borehole diameter in Guss 100 mm threading in St 60 M55 mm spindle turning speed range 29-1.450 U/min Spindle Speed 12 Stück boring spindle 100 mm morse taper MK5 spindle stroke 350 mm Fpedpoyv N Ehofx Afpoi total power requirement 7,5 kW weight of the machine ca. 4.600 kg dimensions of the machine ca. 2600x1100x3200 mm

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Fedpfxevylh Us Afpepi Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, cutting height (max.): 140 mm, cutting width (max.): 1,000 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, OMGA 1000 radial saw Specification: • condition - after inspection, fully functional • manufacturer - OMGA • model - 1000 • blade diameter max 400 mm • max dimensions of the cut element 140 x 1000 mm Fjdpsv Hqknjfx Afpjpi • guards on the saw to ensure the safety of the saw operator • cutting adjustment in three planes • extraction port fi 80 mm and 110 mm • tabletop dimensions 160 x 95 cm • 1998 year of production • manufacturer's documentation • dimensions - 175 x 170 x 155 cm (length x width x height) Additional information: • the machine is in excellent technical condition, ready for immediate use • the photos presented show the actual condition of the subject of sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT and transport costs

Condition: good (used), table mounting size: 400 x 1500 mm table movement x: 1130 mm table movement y: 320 mm table movement z: 430 mm spindle taper: ISA 50 Fedpfx Afsg A Inwepepi spindle turning speed range: Horizontal-/Vertikalspindel 32-1500/25-1200 rpm carriages longitudinal and cross: 15 - 600 mm/min carriages vertical: 6 - 240 mm/min space needed: 2500 x 2200 x 1900 mm weight: 3000 kg

Condition: good (used), height of centers: 220 mm center distance: 1000 mm max. circulation-Ø over bed: 440 mm spindle boring: 52 mm spindle retainer: Gr. 6 mm retainer taper tailstock: 4 MK spindle speed: 37,5 - 3000 Upm forwarding feed: 7500 mm/U thread pitch: electrical connection: 400 V kW Fpjdpfx Ajd Scafofpei space needed: 2800 x 1480 x 1570 mm weight: 2150 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine configuration • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device Dimensions and Travel Ranges Tool holder SK 40 Column diameter mm 195 Table size mm 1200 x 750 Fsdpfx Aeyuqmisfpspi Number of T-slots 5 Distance between T-slots mm 125 Quill travel (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle lower edge – table top min mm 70 / max mm 680 Distance spindle lower edge – floor min mm 970 / max mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacities Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 @ 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feed rate stepless mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, values absolute or incremental Units: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions by machining operation, material-dependent cutting data suggestions Tool management: up to 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X,Y,Z axes, program re-start with selectable functions for targeted entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - arbitrarily mounted rectangular parts - arbitrarily mounted round parts - alignment of cast and flame-cut parts - angular position detection for round parts by probing reference edges or surfaces Test graphic: Graphical display of drilling patterns.

Condition: good (used), Manufacturer: MAS Type: VR 4 Reach: 1000mm Without table! Fpodpfxoh Eigbo Afpoi

Condition: good (used), Outreach: 915 mm Taper: MK3 Length: 1700 mm Width: 1,000 mm Height: 2000 mm Fsdpfx Ajd Ixy Isfpopi Weight: 1000 kg

Condition: used, Year of construction: 1987, functionality: fully functional, Drilling capacity in steel (diameter) 80 mm Arm reach 2000 mm Workpiece height - approx. 1300 mm Boring diameter in steel 100 mm Boring diameter in cast iron 115 mm Thread cutting in ST 60 M 68 mm Spindle speeds 16 - 1250 rpm Number of spindle speeds 32 Spindle stroke 550 mm Number of feeds 18 Feed range 0.06 - 3.0 mm/rev Fedpfx Afjy H Dauspspi Distance spindle/baseplate 480 to 1800 mm Column diameter 500 mm Spindle motor 11 kW Lifting motor 4 kW Total power requirement 15 kW Machine weight approx. 8,500 kg Footprint 3200 x 1250 x 3600 mm with work table 1500 x 1000 x 500 mm

Condition: new, Year of construction: 2024, Power: 1.35kW Speed range: 230 - 3100 rpm Speed steps: 9 Spindle holder: MK-2 Drilling stroke: 85 mm Spindle projection: 140 - 540 mm Fpjdpfxsuix Sgs Afpji Table size: Table size: 500 x 740 mm / 250 kg load capacity Head inclination: 90° left / 45° right Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 240 kg

Condition: new, column diameter: 320messurements (LxWxH): 2670 x 1120 x 2760weight approx.: 3200drilling performance: Stahl (S235JR) - 50Drilling table T-slot size: 14Drilling table T-slot spacing: 180Clamping table length: 630Clamping table height: 500connected load: 6,5Maximum spindle to drilling table distanc: 1420speed range: 44 - 1023Number of speed ranges: 12Maximum Spindle to Column Distance: 1600- Versatile application range, e.g., drilling, reaming, threading - Electrically braked motor - 24V DC electrical system and 2-channel safety circuit according to DIN EN 12717 - Heavy, massive, high-quality cast construction - Wide reach thanks to horizontally adjustable machine head - Clearly arranged control panel - Smooth swivel and travel axes Fpjdpfx Aowruk Isfpji - Elaborately designed column swivel with optimized clamping for maximum stability and minimal clamping offset - Robust, torsion-resistant construction of the arm - Height adjustment of the arm is carried out via powerful motorized drive and lifting spindle - Gearbox of the drill head running in an oil bath - Arm guideways hardened and precision ground - Gear wheels made of chrome-nickel steel, hardened and precision ground, resulting in quieter and smoother operation - Drill head and column can be clamped or released together or separately - Right-left rotation - Massive, precise drill table, generously dimensioned - Hardened and ground worktable with parallel T-slots - Machine light - Overload protection - Thick-walled cast column ensures smooth running and stability - LED lamp - Coolant system with coolant tank in the machine base - RD 6 / RD 7 - The column is hydraulically clamped

Condition: new, column diameter: 260messurements (LxWxH): 1725 x 745 x 2550weight approx.: 1800drilling performance: Stahl (S235JR) - 42Drilling table T-slot size: 19Drilling table T-slot spacing: 171Clamping table length: 635Clamping table height: 415connected load: 4Maximum spindle to drilling table distanc: 1270speed range: 37 - 1253Number of speed ranges: 12Machine FeaturesFunction & ApplicationVersatile application range, e.g. drilling, reaming, tapping Forward and reverse rotation Drive & ControlElectrically braked motor 24V DC electrics and 2-channel safety circuit according to DIN EN 12717 Clearly arranged control panel All axes are manually clamped Structure & DesignHeavy, solid, high-quality cast construction Thick-walled cast column for high smoothness and stability Rigid, high-strength boom construction Large reach thanks to horizontally adjustable machine head Massive, precise drilling table with generous dimensions Hardened and ground clamping table with parallel T-slots Elaborately designed column swivel with optimized clamping for maximum stability and minimal clamping offset Drill head and column can be clamped or released together or separately Movement & MechanicsSmooth-running swivel and travel axes Boom height adjustment via powerful motor drive and lifting spindle Boom guideways hardened and precision-ground Drill head gearbox runs in oil bath Gear wheels made of hardened and precision-ground chrome-nickel steel, ensuring quiet and smooth operation Additional EquipmentMachine light LED lamp Fpedjwrukzjpfx Afpji Overload protection Coolant system with integrated tank in the machine base Model VersionsRD 4 / RD 5

Condition: new, column diameter: 432messurements (LxWxH): 3050 x 1185 x 3050weight approx.: 5600drilling performance: Stahl (S235JR) - 70Clamping table length: 1000Clamping table height: 500connected load: 11speed range: 44 - 1023Number of speed ranges: 29 - 1575traverse path - x: 1185traverse path - y: 1000Versatile application range, e.g., drilling, reaming, threading Electrically braked motor 24V DC electrical system and 2-channel safety circuit according to DIN EN 12717 Heavy, massive, high-quality cast construction Wide reach thanks to horizontally adjustable machine head Clearly arranged control panel Smooth swivel and travel axes Elaborately designed column swivel with optimized clamping for maximum stability and minimal clamping offset Robust, torsion-resistant construction of the arm Height adjustment of the arm via powerful motorized drive and lifting spindle Fpjdpfowruk Uox Afpji Drill head gearbox running in an oil bath Arm guideways hardened and precision ground Gear wheels made of chrome-nickel steel, hardened and precision ground, resulting in quieter and smoother operation Drill head and column can be clamped or released together or separately Right-left rotation Massive, precise drill table, generously dimensioned Hardened and ground worktable with parallel T-slots Machine light Overload protection Thick-walled cast column ensures smooth running and stability LED lamp Coolant system with coolant tank integrated in the machine base Model: RD 6 / RD 7 Column is hydraulically clamped

Condition: new, column diameter: 210messurements (LxWxH): 1260 x 700 x 2180weight approx.: 1120drilling performance: Stahl (S235JR) - 32column diameter: 210Drilling table T-slot size: 19Drilling table T-slot spacing: 171Clamping table length: 600Clamping table height: 380connected load: 3Maximum spindle to drilling table distanc: 1060speed range: 73 - 1247Number of speed ranges: 6 Fpedpfx Aswrukusfpsi

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius Fpjdpfx Afoynt Ucopji min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic