Used Railing for sale (4,697)

Condition: like new (used), Spacing for straight railings: 100 - 140 mm, for stair railings max.: 120 mm Prsdpfx Absxzdn Se Ijd Maximum number of rods: 20 pcs Maximum rod diameter: 30 mm Rod lengths: 450 - 1150 mm Required space: 3300 x 1320 x 1100 mm Weight: 140 kg Rod insertion angle 90°, 0 - 8°, incline angle 20 - 42° (depending on rod spacing)

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery Prsdoh Hf Rmopfx Ab Ijd 01x railing post, used Material color: blue total height: approx. 1.110 mm total width: approx. 110 mm total depth: approx. 62 mm base plate: approx. 120 x 110 x 12 mm ( W x D x H) Diameter of round tube opening: approx. 48 mm Distance center-center-hole: approx. 465 mm Material thickness: approx. 2 mm Weight pcs.: approx. 5,07 Kg Notes: - The railing post is open when viewed from the top. - The heights of the round tube openings are: 565 mm and 1.030 mm. ( Measured from the lower edge of the base plate to the lower edge of the round tube opening ) - suitable for round tubes with a diameter of 45 mm General information about the article: This article is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: excellent (used), 3-phase follow-up controller for asymmetrical load (current controller for constant voltage) Prodpfx Aextu Tiob Iod Additional data: see photos of the nameplates

Condition: used, functionality: fully functional, power: 84.58 kW (115.00 HP), overall weight: 16,000 kg, Year of construction: 1970, Towed roller 16,000 kg, 6 cylinders. Year of manufacture: 1970. Weight: 16,000 kg. 115 hp. Deutz engine with 6 cylinders. Prodpfx Abjxwvpas Isd

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, product length (max.): 1,400 mm, product width (max.): 1,000 mm, Equipment: CE marking, documentation/manual, TECHNICAL DETAILS Number of blasting turbines: 4 Power per blasting turbine: 22 kW Blasting media amount per turbine: 7 kg/h Blasting throughput: 450 kg/min Blasting velocity: 80 m/s Maximum product dimensions: 1,400 x 1,000 mm Prodpfx Abexw Sfqs Iod Cabin diameter: 2,200 mm MACHINE DETAILS Control system manufacturer: Siemens EQUIPMENT Vibrating sieve for abrasive/blasting materials and discharge products Feeding via external rail system possible CE marking Documentation

Condition: ready for operation (used), functionality: fully functional, MACHINE DETAILS Machine type: Manual edge stripping system Alignment: Aligned against stop rails Fixation: Integrated suction cup for fixation EQUIPMENT Pjdexurq Uepfx Ab Ierd Side table for manual edge decoration Side-guided sanding heads Manually adjustable sanding pressure

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, working width: 3,200 mm, sheet thickness (max.): 3 mm, empty load weight: 4,400 kg, TECHNICAL DETAILS Sheet width: 3,200 mm Sheet thickness: 3 mm Opening width of the upper beam: 300 mm MACHINE DETAILS Motor power: 4.5 kW Dimensions & Weight Space requirements: approx. 4,300 x 2,300 x 1,750 mm Pedpfoxyv Iuox Ab Ierd Machine weight: approx. 4,400 kg EQUIPMENT Segmented pointed rail Segmented gooseneck tool

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0-201-09-5124, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,650 mm, working height: 60 mm, TECHNICAL DETAILS Prsdpfoxx Nnxex Ab Isd X-axis travel: 6,000 mm Y-axis travel: 1,650 mm Y-axis travel (for milling): 1,750 mm Maximum working height for trimming: 60 mm Maximum applicable edge height: 65 mm Minimum inner radius: 30 mm Tool change positions: 18 Aggregate saw blade diameter: 200 mm (max.) MACHINE DETAILS Vertical electrospindle (C-vector axis, automatic tool change, cone type HSK F63): 11 kW Drilling head output: 4 kW Vertical drilling spindles in X-axis: 11 Vertical drilling spindles in Y-axis: 6 Horizontal drilling spindles in X: 6 Electrical Data Voltage: 400 V Current: 39 A Frequency: 50 Hz Current: 50 A Control voltage: 24 V EQUIPMENT Numerical control with WoodWop software Adjustable panel support rails for suction cup positioning Pneumatic rods for loading/unloading assistance Adjustable Schmalz-type vacuum suction cups Laser positioning system for suction cups Independent edge-banding unit with 360° rotation Glue pot and premelter for granular EVA adhesive Applicable edge materials in rolls: PVC / ABS 0.4 – 3 mm Rubberized pressure roller + panel preheating lamp Edge trimmer Combined trimming/edge unit Edge holder magazine Chip extraction system with motorized conveyor belt Air conditioning unit for cooling and cleaning of machine control Automatic lubrication system Vacuum pump

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 4,300 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, plate height: 60 mm, Placing a bid obligates the buyer to collect the equipment by calendar week 02 in 2026. Forklifts and transport aids can be provided by the seller. Up for auction is a combination consisting of two Holzma saws, connected to a Bargstedt storage system. TECHNICAL DETAILS HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data Cutting length: 4,300 mm Lift table cutting size: 4,300 mm x 2,200 mm Maximum panel size for lift table loading: 4,300 mm x 2,200 mm Minimum panel size for lift table loading: 1,200 mm x 400 mm Stack Heights Stack height for lift table, floor installation max.: 560 mm Stack height for lift table, pit installation max.: 780 mm Lift table maximum load capacity: 4 t Roller Rails Roller rail element, 10 tracks: 1 piece Roller rail element, 2 tracks: 6 pieces Clamping Jaws Pitch: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables Push-off device position: 2,375 mm Air cushion table with rollers 2,160 x 800 mm: 1 piece Air cushion table with rollers 2,160 x 650 mm: 3 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm HOLZMA PROFILINE HPP 380 Cutting Data Cutting length: 4,300 mm Cutting width (programmable pusher travel): 4,250 mm Saw blade projection: 95 mm Combi and Clamping System Combi profile rail element, 2 tracks: 9 pieces Clamping jaws: 7 pieces Pitch: 75/275/475/1,050/1,850/2,650/3,450 mm Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm Feed and Programmable Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed reverse: constant 130 m/min Programmable pusher speed forward: 80 m/min Programmable pusher speed reverse: 80 m/min BARGSTEDT PROFILINE TLF 420 Panel thickness: 3–60 mm Maximum panel size: 4,300 mm x 2,200 mm Maximum traverse length: 5,200 mm Measuring and Correction System Length measurement: integrated Width measurement: integrated Automatic rotation correction: available Note: Further technical details can be found in the attached order confirmations. Prjdpfsxy Ng Rox Ab Ijd

Condition: new, Convert your machine to rail machine For detailed information, please contact us Prjdpfx Ajxz Ryzeb Ijd

Condition: excellent (used), Catalogue number: 7547 TECHNICAL DATA Pjdovx N Ucspfx Ab Isrd Track width: 300 mm Roll working width: 290 mm Max. disc diameter: 300 mm Disc bore diameter: 70 mm Max. cutting height: 100 mm Table width with extension: 680 mm Table length: 1630 mm *From above: 2 rows of pawls Metal pressure slip roller Roller with saws 2 smooth metal pressure slip rollers From below: Guide rail Pawls Track Electric height adjustment of main body (up/down) Central track lubrication 2 feed speed modes Feed motor: 1.1 kW Main motor: 22 kW Extraction nozzle diameter: 130 mm Overall dimensions (L/W/H): 2000x1400x1700 mm Weight approx.: 900 kg – Italian manufacture – Very good condition – Used multi-blade saw Net price: 34,900 PLN Net price: 8,300 EUR (based on 4.2 EUR rate) (Prices may vary according to rate fluctuations)

Condition: like new (used), Year of construction: 2023, DIVISIO 5100 (2023) Machine Type: Automatic Depaneling System Model: DIVISIO 5100 Transport height: 920 mm ± 50 mm Max. transport width: 460 mm Predpfxev R D Nle Ab Ijd Interface: SMEMA, Hermes, Siemens Transfer direction: Left to right or right to left Operating side: Front of the machine Fixed rail: Front of the machine Panel length: 70 to 460 mm Panel width: 50 to 460 mm Panel thickness: 0.5 to 5.0 mm Max. panel weight: 1.5 kg Max. PCB weight: 1.5 kg Component height, spindle-side: 8 mm; partial 18 mm (other height on request) Component height, gripper-side: 40 mm Trays on lane 2: 600 x 400 mm Power supply: 400V, 208V 50/60Hz, ±10% Power supply system: 3L + N + PE Fuse protection: 3x C16 A without ELCB Power consumption (without suction): 0.8 kW Air supply: 6 bar Air consumption: 120 Nl/min Machine dimensions (L x W x H): 1200 x 2360 x 2152 mm Weight: 1800 kg (standard equipped) Speed (X, Y): 2000 mm/s Speed (Z): 1500 mm/s Acceleration (X, Y): 20 m/s² Acceleration (Z): 15 m/s² Positioning accuracy: ±0.02 mm (20°C ±1°C) Repeatability: ±0.005 mm (20°C ±1°C) Cutting accuracy: ±0.08 mm (20°C ±1°C) Noise level: < 75 dB(A) (may vary due to material mix of the panel)

Condition: new, Advantages BOVER_BASIC intelligent control system Power set (electric motor, reduction gear and belt transmission) Filling hopper Hydraulic pressure unit Robust and adjustable Hardened knives with four cutting edges with an extended service life Hardened cleaning knives Hardened cutting racks HARDOX sieve The engine start-up is controlled by the star/triangle system Basic characteristics FILLING HOLE (mm): 1445 × 1345 ROTOR WORKING LENGTH (mm): 650 ROTOR DIAMETER (mm): 270 SIEVE HOLE DIAMETER (mm): 14 CAPACITY (m3/h): 3 – 5* POWER (kW): 22 WEIGHT (kg): 1750 * Depending on the material and diameter of openings in the sieve OPTIONS on request: Adjustable sieve rails Suction sink with Ø160 mm attachment Screw/snail conveyor (price for 1 meter) Hi-Lo "TURBO" hydraulic power unit Customized hopper Bover Premium with remote access Additional Sieve/Screen Heavy-duty gearbox (22/30 kW) Secondary cutting blade HARDOX toothed strip on pusher rack Predjhbdg Uspfx Ab Ied Hydraulic oil cooler system Ethernet PLC plug-in Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed rate X-axis: 14 m/min, workpiece height (max.): 55 mm, controller model: TS 200 Touchscreen, TECHNICAL DETAILS Panel height: 55 mm Solid wood: 8 mm PVC/ABS thickness: 0.4–3 mm Feed speed: 14 m/min MACHINE DETAILS Control: TS 200 touchscreen EQUIPMENT Guide rail for panel insertion Side roller conveyor with idler wheels Pedoxxy Hfopfx Ab Isrd Roller holder plate Glue unit for EVA hot-melt adhesive with glue pot Edge pressure group for straight profiles with adjustable pressure rollers End cutting unit with 2 motors and tilt adjustment Fine trimming/trimming unit with 2 tilting motors Corner rounding unit with 2 multifunctional motors (Gleaner + Rounder) Edge scraper group Glue scraper group Brush unit Adjustable working height

Condition: used, mileage: 1,12,060 km, power: 77 kW (104.69 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,800 kg, first registration: 04/2020, loading space length: 2,411 mm, emission class: euro6, color: white, number of seats: 3, Year of construction: 2019, total width: 2,032 mm, total height: 1,974 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 1144. KL59621 ---- EQUIPMENT - Airbag (passenger side) - Double-wing rear door with 90° opening angle (without window) - Air conditioning in the front including dust and pollen filter Podsxz I D Depfx Ab Iord - LED lights in the cargo area - Package: Load securing package - Airline rails on the right and left side walls - Radio: Audio system 12 - Radio (FM/AM) - Four speakers, antenna - Audio remote control on the steering wheel - Bluetooth, USB connection and hands-free system - Seats: Seat package 4 - Partition wall (with through-loading flap), with window (custom truck basis) - Driver's seat, 4-way adjustable (forward/backward, backrest, seat cushion inclination, height) - Double passenger seat with storage compartment under individually foldable seat cushions - Headrests, height adjustable - Armrest inside for driver - BASIC seat cover: fabric - Partition wall with window and with through-loading hatch - 6-speed gearbox - ABS electronic with EBD - Driver's side airbag - Outside mirrors, manually adjustable (2) - On-board computer - Flat roof - Tachometer - Electronic safety and stability - No vinyl floor covering - Electric front windows - Ford Easy Fuel - Generator, 220 A - Halogen headlights with daytime running lights - Glove compartment with lid - Interior lighting with delay switch. - Cargo area lighting - Adjustable steering column - Emergency brake support including emergency brake - Particle filter: diesel particle filter - Sliding door: sliding door, right - Mud flaps front and rear - Side protection strips - Power steering - Seat belts - Socket: 12-volt connection - Lashing eyes 8 - Immobilizer - Heat-insulating glazing, slightly tinted - Central locking with remote control - Auxiliary heater, electric ... and much more ---- The vehicle is unprepared! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing / leasing also possible without a down payment! Do you have any questions? We are happy to advise you!

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 05/2018, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF axles Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock EBS-braking system, 2S/2M, 2 sensors on 1 axle 1 pair(s) of load lock rails, horizontally, inserted into side walls Disc brakes 430 mm Prsdpoxwx Tbefx Ab Ijd incl. 2 temperature sensor Ventilation flap, at the front wall, at top of left side, Ventilation flap, small, at rear, right si Lift axle control for 1st axle Low noise aluminium floor, suitable for PIEK floor, tested according to CSC/EN 283, reinforced at re Spare wheel holder as fixed basket for one spare wheel, right side, behind axles, 2nd spare wheel ho 1 spare wheel (6+1) tyres - 385/65R22.5 12 sets of double deck rails, type Airline, inserted into side walls, full length 1.600 mm from the Loading capacity 33 / 66 euro paletts Internal Length/width/heigth - 1331cm/246cm/265cm Gross vehicle weight: 39.000 kg Own weight - 8 813 kg 3 axles Pallet box for 24 Euro-pallets

Condition: excellent (used), Catalogue Number: 7641 ADVANTAGES – The best wide planer for wet and dry wood – Ideal for machining logs, floorboards, etc. – 3 planing shafts + 3 spindles – Manufactured by German brand KUPFERMUHLE – Used planer, in very good condition TECHNICAL DATA Max planing width: 800 mm Max planing height: 200 mm From above: - Feed-in roller, toothed, powered - Anti-kickback fingers - Pressure unit - 2 toothed feed rollers - Pressure unit - Planer shaft 800 mm, 4-knife, 7.5 kW - Pressure units - Profiling shaft 800 mm, 4-knife (equipped with 3 straight knives, 1 profile knife) - Pressure unit - Smooth outfeed roller From below: - Guide rail - Infeed table - Smooth feed roller Prjdpswfti Aofx Ab Iod - Planer shaft 800 mm, 4-knife, 7.5 kW - 2 smooth feed rollers - Split smooth sliding roller - Side pressure at outfeed From the rear: 2 side spindles + pressure units: 1) Right vertical 90 mm – 4 kW 2) Left vertical 90 mm – 4 kW - Spindle diameter: 35 mm - Alternately adjustable spindles - Spindles adjustable up/down, right/left 3) Additional horizontal bottom spindle 350 mm, adjustable up/down & right/left – 5.5 kW - Spindle diameter: 40 mm On outfeed: 4 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - 6 feed speeds: 7/14/9/18/11.5/23 m/min - Feed motor: 2.2 kW - Extraction port diameters: 3×180, 130 mm - Dimensions (LxWxH): 3100x2000x1900 mm - Weight: approx. 3500 kg Net price: 64,900 PLN Net price: 15,450 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: used, Year of construction: 2009, operating hours: 560 h, Genie GS 1930 scissor lift, 8 m Working height 8m * Platform height 6 m * Basket load 227 kg * Weight 1502 kg * Drive 24 volt electric drive with integrated charger * 2 speeds * Dimensions (LxWxH) 1830 x 770 x 2100 mm (without railing 1750 mm) * Folding railing * Non-marking tires * Tire size 12x4.5x8 * Wheel formula 4x2 * Wheelbase 1320 mm * Steel basket * Basket dimensions (LxWxH 1530 (+900) x 550 x 1100 mm * Platform extendable 900 mm * Basket and floor control ----This description does not represent a binding offer and may contain errors. No guarantee for all information. Visit our homepage Prodsqybpxjpfx Ab Isd

Condition: new, Multipurpose combination machine with aluminum sliding table for sawing, milling, surface and thickness planing, and optional long-hole boring Torsion-resistant steel and cast iron construction Machine table made of cast iron, hardened and ground Smooth-running anodized aluminum sliding table, 10-year SCM warranty on slideway wear Large crosscut frame with extendable aluminum telescopic fence and flip stops Psdjiiyppopfx Ab Ijrd Combination saw and mitre fence with 45° quick adjustment Max. saw blade diameter 315 mm with optional scoring unit, tiltable from 90° to 45° Helical steel feed roller for consistent timber feed during thickness planing Four spindle speeds, manually selectable Standard with forward/reverse spindle rotation Three independent motors for each working unit Sliding table with ball contact system Fitted with the proven million-fold SCM ball contact system Consistently smooth operation due to hardened and ground guides Not susceptible to dust and dirt thanks to minimal contact point between ball and trapezoidal rail The extraction ports for surface and thickness planing are located on the same (right) side, so the same extraction hose can be used for both planing operations. Helical steel infeed rollers for constant and even workpiece feed Massive anti-kickback pawls for operator safety 3-knife cutterblock ensures optimum planing results Crosscut length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of blade: 1660 mm Cutting width at rip fence: 800 mm Saw shaft speed: 3500 rpm Saw blade tilt: 90° - 45° Working width: 300 mm Surface table length: 1260 mm Cutterblock diameter / number of knives: 72 mm / 3 pcs Table dimension: 300 x 450 mm Min. / Max. working height: 3 mm / 220 mm Max. stock removal: 4 mm Feed speed: 7 m/min Spindle diameter: 30 mm Usable spindle length: 100 mm Max. retractable tool diameter: 180 mm Spindle speed: 3500/6000/8000 rpm Motor power: 3 x 4 kW, 400 V, 50 Hz Extraction port diameter: 4 x 120 mm Saw blade guard extraction port Ø: 60 mm Weight: 430 kg OPTIONS: - Professional fences EUR 300.-- Saw fence with quick lock and micrometric adjustment Surface planer fence 90° ÷ 45° continuously adjustable - Scoring unit incl. blade EUR 292.-- - Handwheel with digital readout for thickness table positioning EUR 129.-- - Mobility kit EUR 119.-- - 2 additional handwheels for unit adjustment EUR 45.-- - TERSA cutterblock, diameter 72 mm EUR 212.-- - Xylent spiral cutterblock with 3 rows of knives EUR 717.-- - Aluminum long-hole boring device EUR 390.-- - 2 flip stops for crosscut fence EUR 150.--

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Prjdpoxta Dyjfx Ab Ijd Location: Supplier

Condition: used, mileage: 210 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 01/2025, emission class: euro6, color: white, number of seats: 8, total length: 5,981 mm, total width: 2,474 mm, total height: 2,533 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 12211 Errors and prior sale excepted! ---- SPECIAL EQUIPMENT * Double-wing rear door with 256° opening angle (with windows) – heated rear windows and retaining magnets * Windows, 2nd row: sliding windows, right and left * Wheels: All-season tires (winter rated) * Rough road package 1: Wax-based underbody protection * Seats: Rear seats omitted (Flex Package 32) * Seat Package 12: Driver’s seat, 4-way adjustable – Single passenger seat, 2-way adjustable – Height-adjustable headrests – Driver’s inside armrest – Manual lumbar support (driver’s seat) – Trend seat upholstery: fabric * Heat-insulating glazing, medium tint from B-pillar rearward * Conversion KMP: AMF-Bruns Smartfloor (Airline track rails) – 6 Smart Seat single seats with quick-release – 3-point automatic diagonal seatbelt – Plastic storage box – Grab handles at B-pillar – Additional roof mounted indicator lights – Wheelchair ramp (Altec 2600x1000, gas pressure spring, rated up to 320kg) – Side step, right FURTHER EQUIPMENT * 1 battery * Driver and passenger airbags * ABS with electronic brake-force distribution – ESP with traction control – Hill start assist – Side wind assist – Emergency brake assist – Roll stability control – Emergency braking support incl. brake lights * Exterior mirrors, electrically adjustable and heated – with integrated indicator lights Podpfjxzmqvex Ab Ijrd * Battery: runtime programming, adjustable to 10 min * On-board computer with fuel consumption and mileage info (e.g., remaining range), exterior temperature display, and Ford ECO-Mode * Full headliner * Passenger compartment lighting with delay timer * Windows, 2nd row: fixed side windows, right * Power windows front, with quick-down/-up function for driver’s side * Ford Easy Fuel – capless fuel filler and misfueling protection * High-performance alternator * Lockable glove compartment with lid * Interior lighting with delay timer, front reading lamps * Front air conditioning incl. dust and pollen filter * Steering wheel: synthetic leather * Steering column, adjustable for height and reach * MyKey key system – individually programmable second key * Fog lights * Emergency assist * Package: Technology Package 9 – heated windshield – wipers with rain sensor – front and rear park pilot – active emergency braking (camera-based) – lane keeping assist with drowsiness warning and high beam assist, including lane-keeping aid – automatic headlight control with day/night sensor – cruise control – fog lights – Ford audio system with 4" multifunction display * Particulate filter: diesel particulate filter * Wheels: wheel covers * Wheels: tire repair kit * Wheels: steel rims 6.5J x 16, with 235/65 R16 tires * Wipers with rain sensor * Headlights: dipped beam, halogen with daytime running lights * Sliding door, right * Rear mud flaps * Side protection strips * Low side wall cladding * Power steering * Seatbelts: front seatbelt pretensioners and load limiters – driver seatbelt warning system * Start-stop system * Rear bumper with integrated step * Front bumper * Center bumper section partially painted in body color * Immobilizer * Heat-insulating glazing, lightly tinted * Central locking with remote control – 2 keys, one with remote * Auxiliary heater, electric * Overhead storage compartment, front

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 14-1332-015/23270, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 20 m/min, nominal power (apparent): 28 kVA, controller manufacturer: OSAI, controller model: OPEN, total height: 3,000 mm, total length: 5,400 mm, total width: 3,200 mm, overall weight: 4,100 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 12,000 W, number of spindles: 1, number of slots in tool magazine: 14, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Purchased new in 2024 – minimal use, excellent condition Ready to use immediately – fully operational and well-maintained Original purchase price: over €85,000 Machine Specifications Type: 3-axis Gantry CNC (Pod and Rail design) with 2 working zones Working area: 3200 mm (X) × 1300 mm (Y) × 300 mm (Z) Axis speeds: 100 / 100 / 20 m/min Tool changer: 14 positions with HSK-63F tool holders Spindle: HSD 12 kW, air-cooled Boring head: HSD BHZ17 (6 vertical + 4 vertical / 4 horizontal + 2 horizontal / 1 blade) Controller: OSAI Open Smart Vacuum system: Becker KVT3100 pump (100 m³/h, purchased 2023) Key Components Yaskawa motors, Güdel linear guides, Festo pneumatics, Schmalz vacuum components, HSD spindle, OSAI control Bonus Offer As an additional bonus, the machine comes with a free Airpress HK 700-300 Pro compressor – almost new, manufactured in 2024. Predpfx Abjwlaxqe Ijd This compressor provides reliable air supply for pneumatic and vacuum systems, making the setup immediately ready for production. Flexible Payment Option (EU Buyers Only) For buyers within the European Union, I am open to a two-installment payment plan under specific conditions: 65% of the total price upon signing the contract, before delivery. 35% within 90 calendar days from delivery, guaranteed by a promissory note issued by the buyer. Ownership transfers to the buyer only after full payment. This allows the machine to start production immediately while ensuring secure payment of the remaining balance. Please note: this two-installment option is not available for buyers outside the EU. Installation Support While transport is not included, I can offer support for installation and commissioning of the machine. Assistance can be provided either remotely or on-site (depending on location) to ensure proper setup and smooth operation from the start. Reason for Selling Downgrade due to family reasons VAT not applicable. VAT-registered buyers can apply the reverse charge mechanism.

Condition: new, empty load weight: 2,850 kg, maximum load weight: 7,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,580 mm, loading space volume: 46 m³, suspension: air, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 2 x rows of rod lashing rails, 14 x lashing eyes in the floor, walls lined with felt, 1 x interior light, pull-out galvanized stairs approx. 700 mm wide, rear, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Pjdpfx Aoxz Rr Rob Isrd

Condition: new, empty load weight: 3,780 kg, maximum load weight: 6,720 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 42 m³, suspension: air, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, BPW axles, Dautel or BÄR tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 7 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ , , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Psdpfexz Rrwox Ab Ijrd

Condition: used, empty load weight: 3,880 kg, maximum load weight: 6,120 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 10/2019, loading space length: 7,090 mm, loading space width: 2,480 mm, loading space height: 2,430 mm, loading space volume: 42 m³, suspension: air, tire size: 235/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/70 R 17,5, rear tire size: 235/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, tail-lift, Front with portal doors for through-loading with drive-over plate, Dautel tail lift, 4 cylinders, aluminum platform 1,800 mm long, incl. 2 roll-off safety devices, batteries and charging cable, 2 times combination lashing rails, , Vehicle is sold on commission, , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Prjdpfxexz Rtho Ab Ied