Used Felder Hammer for sale (148)

Condition: used, Year of construction: 2010, functionality: fully functional, – Very good condition – Year of manufacture: 2010 – Operating and maintenance documentation (DTR) available TECHNICAL PARAMETERS: – Edge thickness min. - max.: 0.4 – 3.0 mm – Workpiece thickness min. - max.: 10 – 45 mm – Saw trimming unit – Milling unit for trimming excess edge tape flush or with a profile – Designed to remove excess edge tape at the top and bottom edges of the panel – Flush milling – Milling of the edge tape at an angle or radius in a single work cycle – Edge overhang milling: Ø 70 mm, Z 6, a=15°, R=2 mm Isdsw H Rzxjpfx Adlotl – INSPECTIONS CARRIED OUT BY FELDER SERVICE – COMPACT DIMENSIONS – PRECISE AND VERY EASY TO USE – Table dimensions: 2000 x 300 mm – Air supply requirement: 6 Bar – Power supply: 400 V – Power: 3.2 kW – Glue application roller and glue tank – Grooved glue application roller ensures uniform glue coverage on the edge of the workpiece – Feed speed: 9 m/min – Overall dimensions (L/W/H): 2000 x 1260 x 650 mm – Net weight: 360 kg

Condition: like new (used), functionality: fully functional, Exhibition machine For sale is our Felder RL-125 clean air extraction unit from our showroom, with a maximum air flow rate of 1900 m³/h. The extraction unit is in like-new condition and has been inspected and refurbished by our qualified personnel. Technical data: - Clean air extraction unit RL-125 - Extraction connection 125 mm - Manual filter cleaning - Max. air flow rate 1,900 m³/h - Chip container with a capacity of 200 liters - 3 kW (4 hp) motor / 400 volts - H3 certified! The clean air unit is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Iedpfszrnqlox Adletl Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-D1618

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit Ijdpfsw I H Rkjx Adletl With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 30B.11.040.22, functionality: fully functional, TECHNICAL DETAILS Working area, X-axis: 3,300 mm Working area, Y-axis: 1,280 mm Working area, Z-axis: 250 mm Travel, X-axis: 4,000 mm Travel, Y-axis: 1,670 mm Travel, Z-axis: 500 mm Milling spindle Number of milling spindles: 1 Max. spindle speed: 24,000 rpm Main motor power: 11 kW Tool clamping system: HSK-F63 Table design: Cantilever table Itjdpfxjzrmuvs Adljl Table length: 3,300 mm Table width: 1,280 mm Material clamping: Pneumatic Drilling unit Drilling tools available Horizontal drilling spindles: 4 Vertical drilling spindles: 12 Tool changer positions: 12 MACHINE DETAILS Controlled axes: 4 Software: WoodFlash Voltage: 400 V Current consumption: 40 A Connected load: 18 kW Dimensions & Weight Dimensions (L x W x H): 6,250 x 3,494 x 2,300 mm Shipping dimensions (L x W x H): 5,300 x 2,350 x 2,400 mm Shipping weight: 4,000 kg Shipping packages: 2 EQUIPMENT Sawing unit Vacuum pump Becker PICCHIO 2200, year of manufacture 2022 Safety light curtain Manual control panel Tools CNC documentation with user keys/licenses and USB stick Documentation CE marking

Condition: good (used), Year of construction: 2023, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. Isdpfx Asxnxm Nsdletl The extraction unit is in excellent condition and has been inspected and refurbished by our professional staff. (Fully functional) Technical data: - Max. airflow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Automatic filter cleaning - Antistatic filter - H3 dust tested - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: clean air unit, extraction unit, dust extraction, clean air, RL Reference: R-A0117

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Press length without side pressing device: approx. 2,300 mm Press length with side pressing device: approx. 2,100 mm Press width, max.: approx. 1,400 mm Isdpfxjzn Iwqe Adletl 4 pcs. vertical pressing units, adjustable, each with 1 crank drive pressing unit, and 1 counter piece 1 pcs. horizontal pressing unit with 2 crank drive pressing units 1 pcs. counter pressure rail, fixedly mounted on the left side 1 pcs. lower support rail with crank drive

Condition: used, Year of construction: 2025, table length: 3,100 mm, table width: 2,100 mm, Technical data - Table size: 3100 x 2100 mm Ijdjzuw Tzepfx Adljtl - 4-axis main spindle - Linear tool changer, 16 positions - 2 vacuum pumps - 12 vertical drilling spindles - 1 dado blade

Condition: excellent (used), Felder TEMPORA F600 edge bander with glue box Liquids Pre-milling cutters, Itjdpey N Sdyjfx Adljl Glue application with roller, Interchangeable glue tank Second tank included Features glue box, enabling edge banding with PUR glue Pneumatic pre-cut guillotine Liquids End-trimming sawblades Top/bottom trimming unit Corner rounding unit, Profile scraper Cleaning fluids Flat scraper Polishing unit The machine has NC control Max workpiece height: 60mm Max edge banding thickness (roll): 3mm Feed rate: 10 m/min Original working distance: 30,000 meters, in my opinion the technical condition is very good Year: 2023 Possibility to inspect and test on site

Condition: excellent (used), 3 kW motor, Automatic dust extraction, 160 mm dust extraction port, 2400 Pa vacuum, Max. air flow 3200 m3, Iedpfx Adszy Ur Esletl Very good condition.

Condition: ready for operation (used), functionality: fully functional, power: 7.35 kW (9.99 HP), 2-speed (Vario) feed gearbox 4-spindle thickness table guide Electric thickness table adjustment Itedpeyzc Efofx Adlsl

Condition: used, Year of construction: 2007, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, – Year of production: 2007 – Austrian manufacture TECHNICAL SPECIFICATIONS: – Total power: 7.35 kW – Max. saw blade diameter: 450 mm – Min. saw blade diameter: 250 mm – Scoring blade diameter: 125 mm Iodpfeymz Ubjx Adlstl – Pro Gline carriage guides – Carriage length: 2,800 mm – Fence with two stops – Cutting width to the right: 1,250 mm – Three spindle speeds: 3,500 / 4,500 / 5,500 RPM – Main motor power: 5.5 kW – Electric height adjustment of cut – Electric angle adjustment of cut – Electric setting of cutting width on the right side – Automatic scoring unit advance – Extraction port diameters: 100 mm and 120 mm Transport dimensions: – Length: 290 cm – Width: 230 cm – Height: 180 cm – Weight: approx. 1,000 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Technical specifications: - 4 milling speeds - Milling spindle tiltable 90° - 45° Iedewp Ri Uspfx Adlotl - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Related terms: milling cutter, milling machine, milling Reference: R-D1618

Condition: excellent (used), Year of construction: 2013, I sell the format sliding table saw with scoring Manufacutrer: FELDER Model: K975 Year 2013 Cutting length 3200mm. Cutting width 1350mm Cutting height 130mm (at saw blade 400mm) Saw blade and scoring tilting 0-45° digital Saw blade and scoring height adjustment digital Parallel fence manual adjustable. Turn on the main saw blade and scoring unit from control panel Turn on the main saw blade and scoring unit from aluminium sliding table Main motor format sliding table saw 5,5KW (7,5 HP) (3500/4500/5500 rpm adjustable) Scoring motor format sliding table saw Tools, Optionals, and equipment on photos included in price. Very good condition. Available immediately. Iedpfx Ajtt Nq Dodletl

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Motor power approx. 2.2 kW 2 chip collection bags, each with a capacity of 200 liters, chip collection bags replaced Capacity of the system according to the manufacturer: 3,100 m³/h Quick-change system for chip collection bags Machine includes the following options: - Drive system - Dust extraction connections 120 & 80 mm Additionally available: - 1 additional set of new chip collection bags Space requirement approx. 1,300 x 520 mm Iodpfx Aeztxp Ijdljtl Connection values: 400V, 3-phase, N

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Itedpfoyzdnbox Adlel Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: CA.03.013.12, operating hours: 1,555 h, Edge banding machine FELDER G400, used machine / condition as coming in from customer. Itjdpsng H Uvjfx Adlsl Machine is functional tested and OK. Without service / warranty for this price. Free loaded into your truck/trailer. Directly available ex works Barneveld (NL)

Condition: good (used), Year of construction: 2016, - Table length (mm): approx. 3000 Itjdpey Tm Twofx Adlol - Power (kW): 5.5 - Scorer: included - Saw blade: swiveling

Condition: used, Year of construction: 2005, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 104 mm, cutting width (max.): 1,250 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, total length: 3,200 mm, Equipment: CE marking, documentation/manual, saw blade guard, – Austrian production – year of production: 2005 – X-Roll carriage guide system Iodpoy Awwljfx Adlstl – Operation manual DTR and CE TECHNICAL SPECIFICATIONS: – Carriage length: 2800 mm – Cutting width (right side): 1250 mm – Main blade diameter: max. 315 mm – Scoring unit diameter: 100 mm – Main motor: 4 kW – Scoring motor: 0.75 kW – Brake – X-Roll carriage guide system – Cutting height adjustment – Manual angle adjustment: 0° - 45° – Max. cutting height: 104 mm – Option for installing milling cutter, thickness: 6 - 20 mm – Max. diameter: 180 mm – Pawl – Moving guard – Dimensions (L/W/H): 300 / 195 / 170 cm – Weight: approx. 700 kg

Condition: good (used), Year of construction: 2017, - Milling spindle swivel range: 90 degrees / 45 degrees Itodpfx Adoy Tm Rpslol - Spare milling spindle: included

Condition: like new (used), For sale is a used Felder K-540S panel saw with a cutting length of 3200 mm. The machine was only used for a short period and has been inspected and refurbished by our service team. Technical specifications: - Cutting length 3200 mm - Cutting width 850 mm - Cutting height 140 mm - Max. saw blade diameter 400 mm - Height-adjustable + tilting - Incl. protractor scale - Motor power 5.5 kW / 7.5 hp - Year of manufacture 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Itedpfx Ajzil Ebjdlel Related terms: Panel, circular saw, panel saw, Felder Reference: R-L0B9N

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 432.07.383.14, functionality: fully functional, planing width: 410 mm, number of blades: 4, overall weight: 510 kg, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Planing width: 410 mm Planer cutterhead: 4-knife Felder system cutterhead Number of planing knives: 4 Feed table length: 2,200 mm Fence: 1,300 x 170 mm MACHINE DETAILS Motor power: 5.5 kW Motor voltage: 400 V Chip removal: 5 mm Dust extraction connection: 120 mm Weight: 510 kg EQUIPMENT Cutterhead with 410 mm planing width Itjdpfezkt Itox Adlel Infeed table with table length of 1,080 mm Fence with ruler 1,300 x 170 mm Fence guard, EURO standard 4-knife Felder system cutterhead

Condition: used, Year of construction: 2021, - Edge joining unit - Teflon-coated gluing unit - Miter saw unit - Multifunction milling unit x-motion PLUS, flush and radius milling unit - Edge processing unit - Radius grooving unit - Polishing unit Edge banding machine Manufacturer: Felder Format4 Type: Tempora60.06LX Year of manufacture: 2021 Technical data Control system: x-motion PLUS Chain feed Feed speed: 10 m/min Drive motor: 0.75 kW (S6) - 1.1 kW (S6) Itsdpezuyh Iofx Adlsl Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm The minimum workpiece width varies depending on the workpiece length, height, and surface texture. Rotary table edge magazine for edge banding material Diameter of the rotary table: 750 mm Edge thickness: 0.4 - 3 mm Pull-out frame Pull-out workpiece support, extendable up to 450 mm Upper pressure bar Manually adjustable workpiece height: 8 - 60 mm Edge feeder for edge banding and strip material Edge joining unit: 2.2 kW, diamond cutter Z2 Speed: 12,000 rpm, 2 x 1.1 kW Teflon-coated gluing unit for 1.5 kg of EVA or PUR granules Ready for use after only 10 minutes of heating time Tool-free quick-change system Pressing unit, pneumatically controlled 1 driven and 2 tapered pressing rollers form the pressing zone Shear cutter for edge banding material, 0.4 - 3 mm thickness Miter saw unit with two high-frequency motors 0.35 kW, 12,000 rpm Pneumatically swiveling 0 - 10 degrees Multifunction milling unit x-motion PLUS, flush and radius milling unit 1 high-frequency motor above and below, 0.75 kW, 12,000 rpm, each with 4 interchangeable cutters Edge processing unit For soft-forming and post-forming workpieces, for processing the end edge with 0.4 - 3.0 mm edge thickness and 10 - 60 mm workpiece height 2-axis motor-controlled radius grooving unit including pneumatic retraction function Polishing unit Above and below Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW 5 spindle speeds 3500-10000 rpm Milling spindle tilting 0-45° Sliding table length 1300 mm Electric height and tilt adjustment Electrically adjustable milling fence Milling fence completely foldable Max. tool diameter 250 mm Fence jaws aluminium 550 mm Centrex milling guard Itedpexbq Ulefx Adljl Weight approx. 700 kg

Condition: ready for operation (used), Year of construction: 2016, Felder clean air extraction unit | Dust extraction system RL 200 | Ø 200 mm Maximum flow rate: 4000 m³/h Nominal flow rate: 20 m/sec, 2300 m³/h Valve pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Iedpfxowa Rlks Adljtl Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: Ready for use Price: €15,500 The system has already been dismantled and is stored in the Raasdorf warehouse.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, workpiece height (max.): 45 mm, edge thickness (max.): 45 mm, total height: 1,640 mm, total length: 3,350 mm, total width: 1,510 mm, overall weight: 770 kg, extraction nozzle diameter: 60 mm, We offer for sale a professional edge banding machine with pre-milling unit of the company FELDER model G480. Below you will find some useful information about the machine: * Year of production - 2017 * Equipped with the Schugoma hot-air system for zero joints * Connected load - 7 kW * Edge thickness - 0.4-350 mm Itjdpfx Aetp T Dtodljl * Thickness of the sheets - 8-45 mm * Minimum width/length of the sheet - 70/210 mm * feed speed - 9 m/min * has a pre-milling and corner rounding unit * Automatic feeding of edges from a roll * Impact shears for PVC and ABS edges up to a thickness of 3 mm. * Teflon glue tank with a capacity of 1.2 kg. * Saw blade cutting unit with 12,000 rpm. * Rotating control panel with LCD display. * Suction nozzle - 7 x 60 mm * Weight approx. 770 kg * Overall dimensions 335 x 151 x 164 cm (Wx Lx H) * Perfect technical and visual condition