Used Hand Edge Banding Machine for sale (70,450)

Condition: used, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, height adjustment type: mechanical, overall weight: 450 kg, – Italian production – year of production 2016 – pre-milling Hfjdowb Ha Topfx Ad Ujd – DTR, CE TECHNICAL PARAMETERS: – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm – weight: 450 kg

Condition: excellent (used), CATALOG NO. 7920 TECHNICAL DATA Equipment: - Disc - Tape feeder - Guillotine - Glue tank (granulate) - 2 pressure rollers - Cutting unit – guillotine - 2 milling units for edge profiling - 2 scrapers – for removing excess glue Hjdpfxoyrryfj Ad Usfd - Minimum length of workpiece: 210mm - Minimum width of workpiece: 70mm - Thickness of workpiece for edgebanding: 8-45mm - Edge tape thickness: 0.4-2mm - Support extension from table - Feed motor: 0.25kW - Total power: 5.5kW - Extraction port diameter: 115mm - Dimensions (L/W/H): 2100x670x1320mm – Weight: 276kg ADVANTAGES – Unpainted – Austrian production – Very good condition – Documentation (DTR) – Used edgebander Net price: 14,900 PLN Net price: 3,550 EUR (at exchange rate of 4.2 EUR) (Prices may vary with higher fluctuations)

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment/features: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter Hfedpjytkiuofx Ad Usd - Pneumatic roller separation with cutter (for cuttable edges) - Three pressure rollers - Belt feed motor 0.25 kW; approx. 1250 mm length; feed rate approx. 6.0 m/min; 50 mm wide timing belt with thick, workpiece-friendly rubber coating. Digital counter for height adjustment - Direct glue application to the workpiece: leakproof glue pot with glue supply from below and fast heat-up time after machine stoppage - Flush trimming unit for front and rear workpiece edges, automatic sensing at the workpiece, pneumatic trimming with a cutter for cuttable edges - Flush milling unit with vertical sensing and horizontal guidance, reproducible adjustment via digital counters, 2 high-performance 0.4 kW high-frequency motors, continuously adjustable from 4000 to 18000 rpm, cutter diameter 70 mm, Z4, radius 2 mm/15°; central extraction connection Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Technical details: - Minimum workpiece width: approx. 80 mm - Workpiece thickness: 10 – 50 mm - Minimum workpiece length: approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation max.: 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Heat-up time: approx. 10 minutes - Pneumatic connection: 6 bar - Working height: approx. 880 mm - Dimensions: approx. 1800 x 700 x 1300 mm (without film disc Ø 800) - Net weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 1998, 0.4-5 mm Workingpiece thickness from to 10-50 mm Hfsdpfx Asx Tu Rded Ued Total length 2730 mm Weight 720 kg

Condition: used, Year of construction: 2007, machine/vehicle number: AH/004965, The STEFANI Solution 5400 is a single-sided industrial edge banding machine designed for medium and large production facilities. The SOLUTION model range was conceived as a flexible solution for both stand-alone workstations and integration into automated production lines. SALE ON COMMISSION. Hfedpeynb Nnjfx Ad Uod

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Condition: unchecked Equipment and technical data: Hedpfxjyq T Ino Ad Uofd - Edgebanding thickness: 0.3-5 mm - Workpiece thickness: 6-45 mm - Minimum workpiece width: 60 mm - Minimum edge length: 200 mm - Feed rate: 11 m/min - Electrical connected load: 3.4 kW - Extraction port: 100 mm - Air requirement: 550 m³/h - Glue system: cartridge 1906 - Trim saws, front and rear: 1975 - Radius milling unit, top and bottom: 1942M - Radius scraper, top and bottom: 1929 - Buffing unit: 1941 K - Machine length: 3675 mm - Machine width: 1470 mm - Machine height: 1200 mm Weight: 950 kg Availability: short-term Location: 63934 Röllbach

Condition: new, Year of construction: 2025, Joining unit: Yes Edge thickness: maximum 3mm Workpiece thickness: from 8mm - 50mm Workpiece width: minimum 110mm Hfedpfx Aek Eai Ujd Uod Glue basin: granular, quick change basin cross-cut shear: yes cross-cutting / flush sawing: yes Milling station: chamfer / radius corner copying: yes Flat - scraper: yes Radius scraper: Yes Buff: Yes Non-stick spray unit: Yes Infeed ruler adjustment: manual workpiece thickness adjustment: manual power input: 5 kW machine length: 3314 mm Machine width: 1085 mm Weight: 545 kg

Condition: excellent (used), Year of construction: 2017, I sell the fully equipped edge banding machine BRANDT KDF 230 AirTec, year 2017: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible / AirTec unit Material pressure zone manual adjustable Hfjdpfx Asythxmsd Usd End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 5070mm Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Features and technical specifications: - Round pot glue application unit - With second glue application unit for PUR processing - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end cap cutting - Top/bottom milling units: 2 milling units with tracing wheels for radius or chamfering - Radius scraper blade: pneumatically operated, post-processing of radii - Surface scraper blade: for smoothing the edge surfaces - Polishing unit: 2 polishing wheels with motors for final finishing - Riepe spray device - Control: PLC with control panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW Hsdpfoyqanbsx Ad Ujfd - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120 x 840 x 1385 mm Machine weight: approx. 3,000 kg Availability: short notice Location: Röllbach

Condition: excellent (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings mm 1,3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 266 / 2400 (option 3000) Distance (center-axes) of the Disappearing Dogs (mm) 540 (prepared for 270 mm) Numerical Control ICOS OPEN Feeding speed (adjustable) max. 60 m/min Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 283.205 Band Pressure zone. Edge coils supporting unit (No. 2 reels) Servo-drive Snipping (end-cutting) unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min) Hfedpsu Ekbnjfx Ad Uod Fine Trimming unit 08.055 (KW 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Spraying Unit (for polishing liquid) Free space (for possible addition of a scraper) Buffing unit 08.617 (Kw 0.18 x 2)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) max mm 1,0 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt glue) 04.1570 Pressure zone Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Rough Trimming unit 08.0555 (1 x Kw 0,66) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min Hjdpfjwz Ic Aox Ad Uefd Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Milling grooving unit: 75.30 (2 x Kw 4,4)

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units 75.30 (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Hfsdpfx Ajunrwnsd Ued Pressure zone Edge coils supporting unit (No. of reels) 6 Rough Trimming unit 08.055 (2 x Kw 1) 0°-30° Fine Trimming unit 08.055 (2 x Kw 0,66) 0°-30° Profile Scraping unit 08.515 Free space Buffing unit 08.617-2 (2 x Kw 0,18) Nr. 2 Milling grooving units RIGHT: 75.30 (2 x Kw 4,4) 90°-180°

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 240 / 2500 Numerical Control PC 22 Adjustable feeding speed (m/min) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 (hydro) Hfodpfxelikydo Ad Ued Hogging Units KD 11 (2 x Kw 8,1) hydro EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "C" Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit MF 20 (2 x Kw 0,55) 20° Corner Rounding unit (Contour Trimming) FF22 (4 x Kw 0,4) max 35 m/min Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 11 Free space

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Hedpfx Aeifnxxjd Ujfd Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Gluing, flush trimming, flush milling, chamfer milling, radius milling - Scraper blade, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm Hodpswv Uq Aofx Ad Ujfd - Connection nozzle: 140 mm Ø - Workpiece width: min. 60 mm - Feed rate: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for roll material - WITHOUT pre-milling unit - New pneumatic cylinder Shipping possible at additional cost

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Equipment and technical data: - Automatic edge feeding Hfsdsyncpvopfx Ad Ujd - Cartridge glue system - Pressure unit with 4 rollers - Cross-cut saw unit - Flush trimming unit - Combination trimming unit (flush/chamfer/radius) - Radius scraper - Buffing unit - Edgeband thickness: 0.3 - 20 mm - Maximum edgeband height: 66 mm - Minimum edgeband length: 200 mm - Feed speed: 8/16 or 12/24 m/min Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Hedpfxoxy Tm Ie Ad Uefd

Condition: excellent (used), Catalogue number 7843 TECHNICAL DATA - Table dimensions: 2050x350mm - Table dimensions with support: 2050x940mm - Min. workpiece length: 120mm - Min. workpiece width: 90mm - Workpiece thickness range: 10-45mm Hfjdpox A Dt Dsfx Ad Ujd - Edge width range: 12-48mm - Edge thickness range: 0.4-3mm - Feed speed: 6.4m/min - Power consumption: 2.3kW - Required air pressure: 0.7 Mpa - Spindle speed: 10,000 rpm - Extraction connector: 2x100mm - Heating power: 1250W - Dimensions (L/W/H): 2400x1300x1130mm - Weight: 360kg ADVANTAGES – Unpainted – With polisher – Used machine, in very good condition Net price: 12,000 PLN Net price: 2,860 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot Hfjdpfx Adowlbxle Ued End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Hodpfx Ajw I U E Asd Ujfd Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Edge thickness from strip material: 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Hodpfx Asv R Nk Usd Uefd Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1999, Edge height: 10 - 60 mm Edge thickness: 0.4 - 3 mm Min. curve radius: 20 mm Feed speed: 2 - 18 / 4 - 14 m/min. Motor: 5.2 kW Air pressure: 6 bar Dimensions: 900 x 1300 x 1200 mm Weight: approx. 350 kg Storage location: Nattheim Hjdpfx Aeymcrbed Usfd

Condition: used, Storage location: Sonnefeld Hfodeway Dcepfx Ad Ujd

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Hodpfevvkd Tex Ad Ujfd Storage location: Nattheim

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Hsdpfxevvkfds Ad Usfd