Used Fertilizer Distributor for sale (402)

Condition: excellent (used), Year of construction: 2022, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: Puma 2600, turning diameter over cross slide: 630 mm, turning length: 1,245 mm, turning diameter: 376 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 26 W, type of input current: three-phase, controller manufacturer: FANUC, number of spindles: 2, operating hours of spindle: 7,800 h, number of slots in tool magazine: 12, Equipment: chip conveyor, For sale: Turning center with sub-spindle and Y-axis. Machine in perfect condition. Purchased new in mid-2023. Currently in operation, with less than 8,000 operating hours; parts produced well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for robot operation: equipped with autodoor and external communication signals. Features include parts conveyor and oil mist filter. NOTE: The robot is not included in this offer – separate sale and integration support can be offered upon individual quotation. TECHNICAL DATA according to manufacturer’s specification: 1) Capacity Swing over bed: 680 mm Swing over cross slide: 630 mm Max. turning diameter: 376 mm Recommended turning diameter: 315 mm Max. turning length: 1245 mm Max. workpiece weight (incl. chuck): In chuck: 500 kg (with support: 1000 kg) Bar capacity in spindle: 102 mm 2) Main Spindle Chuck: 315 mm Spindle nose: A2#11 ASA Front spindle bearing diameter: 160 mm Spindle bore: 115 mm Chuck through hole: 103 mm Spindle motor power (S3-25%/S6-60%/S1 Continuous): 26/22/18.5 kW Spindle speed range: 2 - 800 rpm Max. spindle torque (S3-15%): 1123 Nm Power transmission: Belt 3) Sub-Spindle Chuck: 175 mm (optionally 210 mm) Spindle nose: A2#5 ASA Spindle bore (diameter): 62 mm Sub-spindle cylinder bore: 50 mm (H8) Spindle motor power (continuous/30 min): 7.5/5.5 kW Sub-spindle speed range: 4,500 rpm Max. spindle torque (30 min): 85 Nm Power transmission: Belt 4) Axis Travel X axis: 260 mm Z axis: 1350 mm Y axis: 105 (±52.5) mm B axis: 1350 mm C axis (1, 2): 360° (0.001° increments) Rapid traverse: X axis: 30 m/min Z axis: 30 m/min Y axis: 10 m/min B axis: 30 m/min C axis: 200 rpm 5) Bed and Saddle Slant bed, tilt angle: 30° Bed guideway (Z axis): 437 mm Saddle (X/Y axis): 321/325 mm Sub-spindle stroke: 335 mm 6) Tooling System Tool holders: BMT 65P Number of tools: 12 Tool size: 25 x 25 mm Max. drill diameter: 50/32 mm (main/sub-spindle) Driven tool motor power (5 min/Cont): 7.5/1.5 kW Driven tool speed: 5,000 rpm Driven tool max. torque: 95.5 Nm Driven tool collets (ER32): Φ3–Φ20mm (option) Turret indexing time: Single position: 0.15 s (1.2 s full station) Max. driven tool drilling diameter: φ20 mm, M20 x P2.5 Csdox Rqkujpfx Anforc 7) Hydraulic System Tank capacity: 20 l Flow rate (60/50 Hz): 25 / 20.8 l/min Power/Pressure: 2.2 kW x 5.0 MPa 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Power/Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine Accuracy Positioning: 0.01 mm Repeatability: 0.02 mm C Axis Positioning: 0.0167° Linear repeatability (axes X/Z/Y): ±0.002/±0.003/±0.003 mm C Axis repeatability: ±0.006° 10) Control System Full electric control for X, Y, Z, C axes For further questions or additional information, please feel free to contact us by message or phone.

Condition: like new (used), Year of construction: 2015, operating hours: 10 h, functionality: fully functional, Volumetric dosing machine COMAS model DN (reconditioned with new dosing unit) Specialized machine for dosing “sponge cake” composition and creams onto cake layers: a) Sponge cake onto mould trays with diameters of 240–260 mm and thicknesses of 7–12 mm, or onto rectangular trays with custom circumscribed dimensions. b) Creams onto the layers from point a) in multiple layers (optional). Machine configuration: - Main structure made of stainless steel (S/S) with wheels and locking pivots. - Dosing head with pneumatic operation, Waicon and/or Fesner brand. - Height adjustment device for the dosing head, operated by handwheel. - Product dosing volume adjustment device, operated by handwheel with markings. - No. 1 height-adjustable work surface. - No. 1 50-liter buffer tank for sponge cake composition storage. - No. 1 interchangeable dosing cylinder, diameter 100 mm. Adjustable dosing volume from 78 to 1240 cm³. Codpfjwxlm Tsx Anferc - No. 1 terminal distributor for dosing into moulds with diameter 260 mm, equipped with perforated diaphragm for final closure. - No. 1 limiting pedal for dosing actuation or line synchronization. - No. 1 set of nozzles for sponge cake dosing. - Optional cream decoration (see pictures/next page). - No. 1 electrical installation and control panel. Main technical features - All parts in contact with the product are made of AISI 316 stainless steel or other decontaminable materials. Structure made of AISI 304 stainless steel and/or food-grade aluminium. - Transmissions and gears made of chrome-plated steel. Bearings are stainless steel-coated with hermetic sealing. - Pneumatic system: Waircom and/or Fesner brand. - Compressor: excluded. - Working cadence: a) Manual, via pedal (estimated 5–15 cycles/min). b) Automatic mode: 8–15 cycles per minute, adjustable.

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Max format 790 x 560 mm : max speed 6,000 sheets / hr High speed MABEG suction feeder : 6 heating zones : 3 x electronic servo longitudinal foil feeds : 3 line hologram capability : Cedpfx Anjy T Ngtofjrc Full impression and register tested before supply Carries distributor's warranty

Condition: new, Year of construction: 2026, functionality: fully functional, power: 36 kW (48.95 HP), input voltage: 380 V, inner dimension length: 2,000 mm, inner dimension width: 1,500 mm, inner dimension height: 1,800 mm, total length: 3,033 mm, total width: 1,802 mm, total height: 2,553 mm, overall weight: 750 kg, fuel type: electric, Equipment: CE marking, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately based on the delivery address. Please contact us for an individual transport quote. ✅ Made to order ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment Please also inquire about current stock availability. ➖➖➖➖➖ ⭐ Matech Powder Oven with Electric Heating – MATOVENB-151820 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Compact ☘️ Efficient ☘️ Professional Curing ✅ Electrically heated powder oven ✅ Compact design for small and medium-sized workpieces ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and curing time ✅ Programmable automatic exhaust fan function ✅ Audible signal at end of curing cycle ✅ Insulated door with specialized locking system ✅ Durable sandwich panel construction ✅ Excellent heat retention due to robust insulation ✅ Timer function from 10 minutes to 24 hours ✅ Automatic shut-off after process completion ✅ Compatible with mobile workpiece trolley ✅ Optional rack system for small series production ➖➖➖➖➖ ♨️ Also available with extension up to 500°C for high-temperature processes (optional) ➖➖➖➖➖ Technical specifications: ✔️ Model: MATOVENB-151820 ✔️ Internal and external dimensions: see technical drawing in the image gallery ✔️ Electric heating power: 36 kW ✔️ Fan capacity: 3,000 m³/h ✔️ Recirculation fan: 1.50 kW ✔️ Exhaust fan: 0.53 kW ✔️ Total power: approx. 38 kW ±10% ✔️ Digital temperature control Credpfx Ansxpvbaofec ✔️ Infinitely variable temperature setting up to 220°C ✔️ Interior: 1.2 mm galvanized steel ✔️ Exterior: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm mineral wool + 100 mm glass fiber ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ Signal tone after process completion ✔️ Control panel: 1 unit Further MATOVENB electric powder ovens available in various sizes. Dimensions and technical data for additional models can be found in the attached catalog. ➖➖➖➖➖ ⚙️ Optional control features ✅ PID control for precise temperature regulation ✅ Touchscreen control panel and smartphone operation ✅ Ramp-heating mode for defined temperature curves ✅ Storage of process parameters ✅ Weekly & monthly reports at the touch of a button ➖➖➖➖➖ ️ Safety and process monitoring Safety sensor to prevent overheating Automatic shutdown in the event of a fault Acoustic alerts in case of errors Smoke extraction via automatic venting system ➖➖➖➖➖ ♨️ Ramp Heating Mode (optional) Accurately control temperature profiles and holding times, for example: • Reach the target temperature within a specified time • Maintain the desired temperature for a set period • Controlled cooling down to the target temperature • Automatic notifications for process events ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer a range of financing options to ensure flexible investment planning. Contact us for information on leasing, hire purchase, or installment payment options. ➖➖➖➖➖ Custom dimensions or special configurations available on request. We are happy to plan a tailored solution for your workshop. Request your quote now – equip your business for professional powder coating!

Year of construction: 2004, condition: used, Year: 2004 Condition: good Counter. 91 Mil Impression but reality is approx. 200 Mil Machine on stock Technical specification: - Maximum sheet size: 720 × 1,030 mm - Minimum sheet size: 360 × 520 mm - Paper thickness: 0.07 – 0.30 mm - Maximum printing area: 705 × 1,020 mm - Maximum printing speed: 13,000 sheets per hour - Minimum printing speed: 3,500 sheets per hour Printing plate: - Length × Width: 800 × 1,030 mm - Thickness: 0.30 mm Blanket: - Length × Width: 900 × 1,040 mm Inking unit: - Number of form rollers: 4 - Form roller diameters: 87.5 – 77.5 – 85 – 90 mm Crodpfxjy Ixnpo Anfec - Number of rollers: 21 (lower unit) / 20 (upper unit) Pile height: - Feeder: 1,430 mm - Delivery: 1,430 mm Dimensions and weight: - Length × Width × Height: 11,022 × 4,037 × 3,383 mm - Weight (standard configuration): 64,220 kg (machine only) Electrical specification: - Power consumption: 117.94 kW (machine only) - Frequency: 50 Hz Specification: - Remote diagonal register adjustment (cocking). - Semi-automatic plate changing in the upper printing unit. - Semi-automatic plate changing in the lower printing unit. - AMR job presetting system: presetting of paper size and thickness, presetting of feeder table brushes / feed roller, presetting of feeder side air blowers, presetting of the side lay, and sheet drum brake position. - Automatic ink roller washing system. - Automatic blanket washing system. - Automatic impression cylinder washing system. - Lateral feeder pile adjustment (via shifting feeder). - Remote sucker height adjustment. - Water-cooled distributor rollers. - Oscillating ink form rollers: 2 × B and 2 × D for the upper and lower printing units separately. - Chrome-plated plate cylinder. - Chrome-plated impression cylinder (with special surface coating). - Chrome-plated blanket cylinder. - Combined Technotrans Beta.C 300L system for dampening solution cooling and ink temperature control (including CombiControl 4.3, Aquados C5, and integrated tank). - Grafix powder spray unit with Grafix powder spraying system.

Condition: used, mileage: 88,060 km, power: 115 kW (156.36 HP), color: yellow, gearing type: automatic, loading space length: 60,600 mm, loading space width: 24,500 mm, loading space height: 25,200 mm, Year of construction: 2020, Equipment: ABS, power assisted steering, For vehicle inquiries, Mr. Seidel will assist you (by phone). Cedpfsyxklnjx Anfsrc Mercedes-Benz Axor 816 4x2 box body for furniture transport A1M Front axle, 4.1 t; A2B Rear axle, crown wheel 325, hypoid, 6.2 t; A5L Axle ratio i = 3.417; B1B Electronic braking system with ABS and ASR; B1C Electronic compressed air supply unit, low; B1F Heating for the electronic compressed air supply unit; B2A Disc brakes on front and rear axles; B4A Condensate monitoring for compressed air system; C2J Wheelbase 4,220 mm; C5I Mounting parts for flatbed body; C6A Steering ZF 8090; C6Z Reinforced stabilizer, underframe, rear axle; C7A Rear underrun protection (ECE); C7M Side guard, weight-optimized; D1B Standard driver’s air suspension seat; D1S Standard passenger’s air suspension seat; D1Z Middle seat with 3-point safety belt; D3X Flat fabric seat cover; D4A Standard dashboard; D4W Electric windows, both sides; D6Y Pollen filter; D7L Overhead storage above the windscreen, 1 compartment; D8A Roof hatch/vent; E0Y Battery cover; E1E Maintenance-free batteries, 2 x 12 V/100 Ah; E1N Generator 28 V/100 A; E3F Additional 12 V/15 A socket on the beltline; E3I Additional 24 V/15 A socket on the beltline; E5A Switch No. 1 for bodybuilder electrical system; F1X S-Cab ClassicSpace, 2.30 m, tunnel; F6C Tinted windscreen; F6I Heated front mirror; F6J Electrically adjustable main mirror, driver’s side; F7W Single-step cab entry; F8E Central locking; F8L Immobilizer with transponder; F8X Rain/light sensor; G0U Economy driving mode; G1B G 70-6/5.94-0.74 transmission; G5G Mercedes PowerShift 3; I0E Tubeless tires 215/75 R 17.5 front/rear; I4A 4x2 axle configuration; I5Q 7.5-ton vehicle; I6W Leaf suspension, rear axle; J1A 10.4 cm instrument cluster; J1O 2nd generation digital tachograph, ADR; J1S Tachograph manufacturer VDO; J3N Fleetboard Eco Support; J5S Radio with USB port and Bluetooth; J9D Pre-equipment for toll registration; J9N Pre-equipment for Truck Data Center 6 (DTCO); K0E Plastic tank 120 l, left; K3T AdBlue tank 25 l; K5M Lockable tanks; K5S Protective cap for AdBlue dosing system; K7I Exhaust system on right frame, tailpipe inward; L1B Daytime running lights; L1H Halogen fog lamps; M0S Noise insulation to ECE; M1H Engine OM934, inline 4-cylinder, 5.1 l, 115 kW (156 hp), 650 Nm; M5C Engine version Euro VI, D; Q1J Front spring 3.6 t, parabolic; Q2A Rear spring 4.6 t, parabolic; Q8L Crossmember for G135 trailer coupling; R0Z Wheel nut cover; R1A 6.00 x 17.5 tapered rim; S1D Stability Control Assist (ESP); S1H Lane Keeping Assist; S1P Active Brake Assist; S5A Speed limiter 90 km/h / 56 mph, ECE; S5Z Cruise control; S8A First aid kit; S8C Warning triangle; S8D Warning lamp; S8E Warning vest; T0F Weight option 7.49 t (3.6/4.6); U2I EBS control code, 4th generation; U3F Control code, Global AdBlue Sensor (GMS DEF); V1D Atego new distributor; V1W Standard; V2T Atego model generation 1; V6C Minimum equipment for flatbed/box vehicles; V7C Dry freight box body; V8A VIN chassis number; X2E EU type plate; X2T Maintenance documentation; X2Y Registration certificate, Part II, prepared; X3O Mercedes-Benz OnRoadService; Y1C Control for paint tones, solid double-runner; Y1G Cab paint allocation, topcoat line 2; Z3H Side marker lights, 1st position; Z3I Side marker lights, 2nd position; Z4D Inline engine, 4-cylinder. Cargo space dimensions: L 6,060 mm, W 2,450 mm, H 2,520 mm Gross vehicle weight: 7,490 kg Unladen weight: 4,975 kg Payload: ...

Condition: new, functionality: fully functional, machine/vehicle number: M30-4, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,000 mm, free lift: 1,833 mm, fuel type: diesel, mast type: triplex, construction height: 2,689 mm, fork length: 1,200 mm, empty load weight: 6,000 kg, total length: 4,701 mm, drive type: Diesel, construction width: 1,927 mm, All-terrain forklift Chassis number: M30-4 Fork width: 125 mm Fork thickness: 40 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: New machine Technical condition: New Front tires type: Pneumatic Front tires condition: New Rear tires type: Pneumatic Rear tires condition: New Description: 12-month factory warranty / Maximum 2,000 operating hours 3rd valve, 4th valve, rear work lights, front work lights, fully enclosed cab, full free lift, CE certificate, exterior mirrors, rotating beacon, wiper, LED, seat, - Mast tilt 15° / 12° forward-back - Mast tilt holding valve - Fork carriage with guide rollers, width 1,470 mm FEM 4 - Hydraulic line for distributor - Hydraulic kit function for triplex mast with free lift FLT 50 - Hydraulic kit function for triplex mast with free lift FLT 50 - Hard connection for 3rd and 4th hydraulic circuit - Front tires: Alliance A323 405/70-20, off-road tread - Rear tires: Alliance A317 10.5-18 10PR, off-road tread - Full cab - Differential lock - Mechanically suspended plastic seat - LED front work lights (2x) - LED rear work lights (2x) - Orange LED rotating beacon - Reinforced battery capacity 12V 180Ah 900A - Reversing warning signal in counterweight - CE machine homologation - Easy Link Standard Module Crodpfsy R Hmxsx Anfjc

Condition: used, mileage: 3,29,500 km, power: 235 kW (319.51 HP), first registration: 11/2005, fuel type: diesel, empty load weight: 12,320 kg, maximum load weight: 5,680 kg, overall weight: 18,000 kg, axle configuration: 4x4, wheelbase: 3,900 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 2, loading space length: 4,200 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, crane, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, with superstructure, 1 comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, 16-speed gearbox, ABS (anti-lock braking system), constant throttle, auxiliary drive, differential lock, fog lights, long-range headlights, work lights, rotating beacon, storage compartment, leaf spring suspension, trailer hitch with air and light connections, aluminum tank, low-noise G1, winter service equipment, lashing eyes, U-protection, swing-out flaps, sunroof, crane behind the cab, emergency stop, grab control, foldable, 2-point hydraulic support, radio remote control, 3x hydraulic outriggers, yellow environmental badge. Crjdpfx Anoy N Tb Hofoc Wheelbase: 3900 mm, Superstructure: Meiller 3-sided tipper with aluminum sideboards, Crane: Palfinger PK 12000 B with radio remote control, OLD TACHOGRAPH! Differential lock front axle, 9-ton front axle, rear axle H7 13t, ring gear 300, Telligent braking system with ABS, ABS can be deactivated, drum brake on front and rear axle, stabilizer rear axle, steel bumper, parameterizable special module (PSM), distributor cockpit, pre-equipment for toll collection, construction site filter, reversing warning, auxiliary drive input shaft MB 2c, rear engine output, torque 600 Nm. Load chart: 4.5m - 2420kg, 6.1m - 1720kg, 8.1m - 1260kg, 10.2m - 980kg. Suitable salt spreader -9923- available at an extra charge! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: new, functionality: fully functional, Year of construction: 2026, Asphalt Hot Box НВ-2 With Asphalt Hot Box HB-2 by TICAB TM you can deliver hot asphalt from the asphalt plant to the place of road works, with minimal heating loss. Thermal insulation of the container with quality mineral wool allows to keep the working temperature of the asphalt up to 12 hours without additional heating. At the same time, the HB-2 is additionally equipped with a Beckett diesel heating system and a Thermal Controller. HB-2 is equipped with a hydraulic lifting system. There is a manhole on the top of the tank for loading the hot asphalt. Asphalt Hot Box HB-2 by TICAB TM is easily mounted on the truck body or on a trailer. SPECIFICATIONS: Credpfx Ast It Dvjnfoc - Capacity - 1,8 m3 TICAB Manufacturer of road machines: bitumen emulsion sprayers, crack sealing mahines, asphalt recyclers, street vacuum cleaners, universal loaders and other road machines. The highest European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor there! We are looking forward to contact with you!

Condition: good (used), Year of construction: 2018, Ref. -No.: 10643 Manufacturer: FERMAT Type: Gantry Year of construction: 2018 Type of control: CNC Control: Siemens Sinumeric Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 20000 mm Y-Travel: 7800 mm Z-Travel: 2000 mm W-Travel: 1000 mm Turning Speeds: 20000 RPM Speed work spindle: 0 - RPM Max. Torque: 3294 Nm Rapid Traverse X/Y/Z: 40000 m / min Table-Size (Lxw): 20000 x 5000 x 300 mm Power Capacity: 74 kW Headstock - (spindle diameter): 160 mm Further information: - Tool cooling - Low pressure - Tool cooling - High pressure 50 bar (6,000 liters) - Tool cooling - Oil separator - Sludge pump - Machine enclosure (CE) - Electrical - Linear measurement - Electrical - Remote diagnostics - ATC/Robot Robot 140 - Chip conveyor 2 - Operator cabin / protective screen - Electrical - HH iTNC 640 control system - Electrical - Handwheel Crodjyzpxfopfx Anfjc - Electrical - Air conditioning for the distributor - Head - Type 2x UHA 0.001 The machine can be viewed while powered on by prior arrangement.

Condition: new, total length: 2,072 mm, total height: 2,856 mm, total width: 2,105 mm, workpiece weight (max.): 30 kg, power: 2.5 kW (3.40 HP), workpiece height (max.): 1,500 mm, overall weight: 450 kg, filter area: 22 m², energy consumption: 3 kWh, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast delivery ⚡ Professional support! ✈️ The listed price is the net price plus VAT and shipping costs. ✈️ Shipping costs are calculated separately based on the delivery address. Please contact us for an individual shipping quote. ✅ Made to order ✅ Brand-new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorised distributor for Matech products in Europe ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment Please also enquire about current stock availability. ➖➖➖➖➖ ⭐ Matech Powder Coating Booth – MATBOOTH.FT-2W MATECH QUALITY – WITH PROTON SERVICE! The Matech MATBOOTH.FT-2W is a compact powder coating booth designed for professional manual powder coating of small and medium-sized workpieces. Featuring high extraction performance, an automatic filter cleaning system, and a powder recovery container, this booth ensures clean, practical, and economical operation. ☘️ Efficient ☘️ Clean application ☘️ Professional results ✅ Compact solution for professional powder coating ✅ Powerful extraction system ✅ Automatic filter cleaning system ✅ Economical operation with powder recovery ✅ Convenient working with 360° rotatable suspension system ✅ Individual adaptation possible through various additional options ➖➖➖➖➖ Technical features: ✔️ 2 polyester filters ✔️ Filter dimensions: Ø325 x 725 mm ✔️ Automatic filter cleaning system ✔️ Adjustable cleaning interval ✔️ Powder recovery container: 30 L ✔️ 360° rotatable and movable suspension system ✔️ 1 x 2.2 kW extraction fan ✔️ Extraction capacity: 2,800 m³/h ✔️ Control panel ✔️ Lighting Crsdey It Uwspfx Anfoc ➖➖➖➖➖ ✨ No more exhaust ductwork – thanks to the Nano Filter Box! ✨ With the optional Nano Filter Box, you can operate your powder coating booth without a flue connection or fixed ductwork. This provides maximum flexibility – even in workshops where direct exhaust air routing is not feasible. Additionally, the booths can be individually tailored and upgraded to suit your specific work requirements with a range of optional features. ➖➖➖➖➖ ✳️ Preserve your liquidity! We offer various financing solutions to help you plan your investment flexibly. Contact us for information on leasing, hire purchase, or instalment payment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and benefit from service and quality advantages! ✨ Proton Maschinenbau offers professional Matech surface technology for industrial applications. Our machines are made to order and are supplied as new, unused equipment with a 2-year warranty. Special dimensions or customised designs are available upon request. We are happy to plan the right solution for your workshop. Enquire now – get your business ready for professional powder coating! ☀️ 2-YEAR WARRANTY ☀️

Condition: used, mileage: 1,76,100 km, power: 110 kW (149.56 HP), first registration: 02/2005, fuel type: diesel, overall weight: 7,490 kg, color: grey, emission class: euro3, number of seats: 3, total length: 8,080 mm, total width: 2,550 mm, total height: 3,550 mm, Special equipment: * Reinforced battery * Electric window lifters * Side-mounted spare wheel holder * Tail lights for tail-lift mounting * Tail lift * Tail lift switch * Cab seats: adjustable passenger seat * Cab seats: center seat with seatbelt * Cross member for trailer coupling Standard equipment: * Axle configuration: 4x2 Crjdpsyy Hqcjfx Anfoc * Exterior mirrors electrically adjustable and heated * Cockpit distributor * Roof hatch (steel) * Cab: S (short) * Suspension: leaf/leaf * Alternator 80 A * Transmission 6-speed - Type: G 56-6 * Rear axle H 2, crown wheel 325 * Interior filter: pollen filter * Bodywork: chassis * Fuel tank: 125 liters * Model update Atego 2 * Engine 4.3 L - 110 kW diesel (OM 904 LA) * Wheelbase 4,220 mm * Disc brakes * Side impact protection * Cab seats: driver’s seat standard air-sprung * Telligent brake system with ABS * Fixed rear underrun protection * Immobilizer * Permissible gross weight 7.49 t Our special service for you: * Full service history with authorized partners and master workshop * Winter tires available at extra cost * Warranty insurance up to max. 36 months available at extra cost * We are happy to accept your used vehicle as a fair trade-in! * Financing brokerage from 6.99% with or without down payment, up to a maximum of 96 months, subject to creditworthiness * TÜV / DEKRA main and emission inspection * EU net sale possible – intra-community delivery with valid VAT ID number * Non-EU countries (worldwide) sales possible, incl. export declaration, supplier’s declaration * We deliver your vehicle nationwide in Germany at extra cost! * Registration service for customs and short-term license plates, incl. insurance and registration fees The information provided on the Internet is non-binding and for descriptive purposes only. Input errors and mistakes excepted. The information provided does not constitute a guaranteed property as defined by § 434 paragraph 1 sentence 3 BGB.

Condition: excellent (used), Year of construction: 2015, 📌 Glass Processing Center – DENVER Krea / Krea Fit (CNC) General Description: A professional 3-axis CNC glass processing center by DENVER – model Krea (also commonly known as Krea Fit), designed for comprehensive processing of flat glass. The machine combines functions such as grinding, milling, drilling, edge shaping, and polishing, making it an ideal solution for glassworks, window manufacturers, producers of decorative elements, and appliance (white goods) manufacturers. ⸻ 🛠️ Technical Features and Functions 🔹 CNC Construction: 3 interpolated axes ensure precise tool guidance and high processing quality. 🔹 Spindle: powerful electrospindle with a power rating of approx. 6.6–9 kW (S6), optimized for glass working. 🔹 Automatic Tool Changer: 14-position tool magazine (standard), which speeds up operations and increases work flexibility. 🔹 CAD-CAM & CNC Control: an intuitive CNC control system with CAD-CAM support simplifies programming and 2D/3D model processing. 🔹 Automation: can be equipped with an integrated automatic loading and unloading system, handling trolley, and robot for glass sheet handling. 🔹 Vacuum Kit: additional vacuum tank and distributor for stable glass clamping during processing. 🔹 Helpful Accessories Included:  • various vacuum suction cups,  • tool sets,  • reverse osmosis system (e.g. IDROTECNICA IDRO RO 130 ST),  • tanks and auxiliary equipment. Cjdpfsy Edlbex Anfjrc ⸻ Kdsboyk Dx Dsludqncok 📏 Working Range ✅ Supported Materials: flat glass of various thicknesses (typically from a few mm up to approx. 25 mm – depending on tool configuration and program). ✅ Possible Operations:  • edge grinding,  • drilling and milling holes,  • beveling and rounding edges,  • engraving and cutting shapes

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 Cedpeyzr Tfofx Anfsrc With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 2012, functionality: fully functional, Messer Cutting Systems Multitherm 4000 - Oxy-fuel Working area: 2500 x 15000 mm 1 Global Control Plus CNC controller 50 m network cable 1 cooling unit for control cabinet Crjdpfjynzfpsx Anfoc 4 laser diodes 6 drives 1 heat shield (without air cooling) 1 heat shield (without air cooling) 20 m track 1 OmniFlow oxy-fuel supply, 100 cbm 1 compressed air supply on the machine 1 distributor block for compressed air purging 1 oxy-fuel take-off point with pressure regulator 1 take-off point for compressed air 4 ALFA machine cutting torches 4 compressed air purges for ALFA 4 torch suspensions OL 200 N 4 Sensomat Alfa 20 m energy supply via energy chain 1 emergency pull cord (front) 1 emergency pull cord (rear) 2 wheel well safety devices Including tables and rails

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 4,500 mm, total width: 7,500 mm, total length: 1,000 mm, SPECIAL PRICE – only €5,900 instead of €6,900! Save €1,000 now – limited-time special offer. Industrial 4-in-1 Fiber Laser Welding Machine – Model LMH1500 Top performance at a fair price! Our new LMH1500 model with 1500 W Raycus CE-certified laser source offers four integrated functions for professional metalworking: ✅ Key Features: Laser Welding – precise, deep, and virtually distortion-free Laser Cutting – ideal for thin sheets up to approx. 4 mm Laser Cleaning – effectively removes rust, paint, and oxide Seam Cleaning – cleans the weld seam immediately after welding 📌 Technical Specifications: Laser power: 1500W Raycus (CE-certified) Wavelength: 1080 nm Fiber optic cable: 10 meters Cooling: Integrated water cooling Operating modes: Welding, cleaning, cutting, pulse Voltage: 3×400V / 50–60 Hz Welding speed: up to 120 mm/s Dimensions (L×W×H): approx. 1000×760×450 mm Weight: approx. 170 kg 📦 Delivery Includes: 1× LMH1500 Laser Welding Machine 1× Handheld Welding Gun with nozzles 1× Automatic Wire Feeder 1× Laser Safety Glasses 1× User Manual (German) 1× CE Declaration of Conformity 1× Risk Assessment according to Machinery Directive 💼 Areas of Application: Suitable for stainless steel, galvanized sheets, aluminum, copper, brass, and more. Ideal for workshops, mechanical engineering, metal construction, body shops, or maintenance. Codpfx Anjw Tfbrsforc 🔒 Certified & Safe: CE certificate including risk assessment according to EU directives. Delivery includes all required documentation. 📍 Manufacturer / Distributor: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück 🚚 Shipping & Invoice: Delivery via freight forwarding (pallet shipping) within Germany & EU – shipping costs upon request. 🧾 Invoice with VAT shown will be issued. ✅ Buy now and have it delivered ready for immediate use!

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, Csdpfx Anovfxqyeferc 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Condition: reconditioned (used), Year of construction: 2008, required room height-300 cm Dimensions-1730x1500x1860 mm Csdpfx Anskv Uz Asforc Power-7.35 kW Bath tub capacity-300 liters Amount of dough to be mixed-200 kg Amount of flour to be mixed-125 kg The mixer dumps into the distributor to the left or right Dump height-1860 mm

Condition: new, maximum load weight: 31,480 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 35 m³, Equipment: ABS, New vehicle - Available immediately! For sale, lease, or lease with option to purchase upon request! GRW - VAN HOOL 35m³ Horizontal Cement Silo - NEW----* Manufacturer: GRW / VAN HOOL * Type: Cement Silo * First registered: - (New vehicle) * Color: Chassis RAL 7024 Graphite Gray, Container RAL 9001 Cream White * Volume: 35m³ / 1 Chamber * Gross vehicle weight: 36,000 kg * Unladen weight according to manufacturer: 4,520 kg * Payload: 31,480 kg * Axles: 3x SAF axles / disc brakes * Tires: 385/65 R22.5 NEW / Alcoa aluminum rims Crjdpfswaqhljx Anfsc * Suspension: Air suspension * ABS / EBS * 2 bar pressure tank * Operating temperature from -40°C to +80°C * 1 chamber * 2 dome covers * 4" pinch valves * 4" central outlet to the rear * 1x DN65 aluminum pipe (painted) runs on the right side from the main air supply to the distributor * 1x DN65 upper air hose line * 2x hose pipe boxes left and right (5m) * Fluidization mats * 1,185mm fifth wheel height * Aluminum chassis * Aluminum walkway with access to the rear left * Single fender * Full load supports * Toolbox * Aluminum air tank * Loading pressure gauge * LED work lights * LED reversing lights * Reverse alarm New vehicle - Available immediately! For sale, rent, or lease with option to purchase upon request! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or information. We assume no liability for errors, changes, or prior sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: ready for operation (used), Year of construction: 2010, A complete film packaging line Georg Hartmann, consisting of a line distributor, two grouping units and a pillow pack packaging machine, is available. Packaging materials: film, Packaging capacity: approx. 30 packages/min. Documentation available. An on-site inspection is possible. Csdpfsy Ey Ufox Anfjrc

Condition: used, mileage: 5,70,000 km, power: 300 kW (407.89 HP), first registration: 03/2010, fuel type: diesel, empty load weight: 16,500 kg, maximum load weight: 15,500 kg, overall weight: 32,000 kg, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,200 mm, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 2, loading space length: 5,400 mm, loading space width: 2,420 mm, loading space height: 1,100 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: in transit, steel body, type house, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, 16-speed manual gearbox, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, leaf suspension, aluminum tank, low-noise G1, underbody protection, chute, pendulum flaps, roof hatch, green environmental badge. Wheelbase: 4,200 mm Credpfx Ansyniw Hefoc Body: interchangeable system consisting of 3-way tipper body & Stetter concrete mixer body approx. 9m³ Front axle 7.5 t, rear axle H7 13 t, crown gear 233, switchable ABS, Telligent brake system with ABS and ASR, disc brakes front and rear, rear axle stabilizer, steel bumper, PSM, pre-equipment for toll recording, distributor cockpit, Telligent gearshift II, construction site filter, on-board diagnosis 1.0, transmission oil cooling, double PTO MB 124-11B/1C flange + MPA M-speed, rear engine output 600Nm. VIN: WDB9333041L296831! All information is given without guarantee as the vehicle is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: used, We offer a used Kainz crate washing system for E2 and E1 containers, designed for continuous, industrial washing of Euro crates used in meat and food processing plants. The machine is manufactured by WVG KAINZ GmbH, model KP03/3-10, year of manufacture 2001. This is a robust, stainless-steel tunnel washer, ideal for continuous operation in demanding production environments. The KP03/3-10 model is equipped with a double roll system, which ensures stable and smooth feeding and removal of crates from the washing tunnel. Two synchronized roller sections stabilize the containers, improve their guidance, and reduce friction points. This solution increases efficiency, reduces the risk of damage to the crates, and facilitates integration with additional equipment such as stacking machines, sorters, conveyors, or palletizing systems. The machine is designed as a complete system consisting of 4 working sections, which together form an efficient logistics and washing process for E1 and E2 crates: Buffering Section (stocking sector) In the buffering section, empty E1 and E2 crates are collected and positioned before entering the washing tunnel. This part of the system stabilizes the flow of containers and improves the continuity of the entire line’s operation. Transport Section (transporting sector) The transport section consists of a heavy-duty, stainless steel conveyor system that guides the crates through all process zones. Thanks to its robust construction and double-roll system, the crates move smoothly, safely, and with high precision. Washing Section (washing sector) In the washing section, the crates pass through a pre-wash zone and a high-pressure main wash zone. Optimized spray manifolds—both rotating and fixed—reach all internal and external surfaces, effectively removing meat residues, fat, blood, labels, and other contaminants. Drying section (drying sector) The drying section removes residual water from the crates after the final rinse. Effective drying reduces the risk of bacterial growth and helps prevent problems with wet pallets, slippery floors, and excessive moisture in the packing area. Technical specifications: Manufacturer: WVG KAINZ GmbH Type: KP03/3-10 Machine number: 508/2 Year of manufacture: 2001 System: Double roll system Key advantages of the Kainz KP03/3-10 system designed for E2 and E1 Euro crates used in the meat and food industries, robust stainless steel tunnel washer for continuous operation, double roll system ensuring smooth feeding and unloading of crates, optimized spray manifolds for thorough cleaning of the interior and exterior walls of the crates, service platform and large access doors for easy inspection and cleaning, integration possible with conveyors, stackers, and crate distributors, suitable for facilities operating under HACCP, IFS, BRC standards and other stringent hygiene requirements, complete system covering buffering, transport, washing, and drying. The used Kainz KP03/3-10 crate washing system is an excellent solution for meat processing plants, slaughterhouses, and food processing facilities that want to improve hygiene, reduce manual labor, and streamline crate logistics throughout the entire production process. Cedpfxsyyma De Anfjrc

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical Csdpfjyxdwdsx Anfsrc • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: new, functionality: fully functional, Year of construction: 2026, Bitumen Emulsion Sprayer BS‑200 – 200 L Asphalt Distributor | Road Construction Equipment The BS‑200 bitumen emulsion sprayer by TICAB is a compact, reliable, and easy‑to‑operate bitumen sprayer / asphalt distributor designed for road repair, resurfacing, and surface priming before asphalt laying. With its 200 L capacity, this unit is ideal for small‑to‑medium road maintenance jobs where precise and uniform spraying of bitumen emulsion is required. Key Features 200 L bitumen emulsion sprayer – compact and efficient Uniform and accurate spraying for road surface treatment Smooth operation for asphalt maintenance, patching, and repair Ideal for roads, parking lots, driveways, and pathways Portable design that can be mounted on a trailer or platform Reduces material waste with controlled dosing and spray flow Technical Specifications Tank capacity: 200 L Effective emulsion spraying system for even coverage Can be mounted on frame or trailer at customer request Heating system for bitumen emulsion Self‑pumping tank function 3‑level cleaning system (diesel fuel) Cedpfsvphitsx Anferc Manual spray rod for targeted application Optional connection for external compressor to clean spray bar Applications Precise bitumen emulsion spraying before asphalt paving Asphalt road repair and maintenance Tack coat / prime coat application Parking lots, sidewalks, driveways Municipal and contractor roadworks The BS‑200 Bitumen Emulsion Sprayer from TICAB is an efficient and cost‑effective solution for companies seeking a small asphalt sprayer that delivers consistent performance, accurate emulsion distribution, and reliable road surface preparation. Condition: new Manufacturer: TICAB Delivery: worldwide

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, Complete production line for drywall metal profiles (CD/UD/CW50/UW50) for sale, ideal for anyone looking to start or expand a profitable business in the construction materials industry. ✔ Strong and reliable machines ✔ Efficient and continuous production ✔ Easy to operate ✔ Perfect for producing your own products or supplying construction material distributors The production line is in very good working condition, well maintained, and can be tested on site. This is an excellent opportunity for entrepreneurs or companies who want to enter the drywall profile market without investing in expensive new equipment. Crjdpfxjyv R N Us Anfoc Selling due to business reorganization. 📞 For more details, price, photos, or videos of the machines in operation, please contact me by phone or message.