Used Achs Edu for sale (23,903)

Condition: excellent (used), Year of construction: 2004, 5-axis machine from Hermle - Hermle U740 - Year of manufacture: 2004 Control system: - Heidenhain iTNC 530 - Electronic handwheel - 3D measuring probe Renishaw OMP 40-2 Main spindle: - Tool holder SK 40 - Speed range max. 12,000 rpm - B-axis with hydraulic clamping -5° / +95° Tool changer: - 12 magazine positions Working area: - X- 915mm - Y- 500mm - Z- 500mm Table design: - NC rotary table - Table load max. 500 kg Coolant: - Internal cooling 40 bar - Chip conveyor Hjdjz Nih Espfx Ag Sjfn Machine hours: - Machine: 30,622 - Spindle: 8,844 Delivery time: - Immediate Video available. Special features: - Machine is ready for immediate use. - Machine is available for immediate delivery. - Machine can be inspected and tested on-site while powered. - Machine will be loaded onto a truck free of charge. - Forklift for loading is available. - Transport can be arranged upon request.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Universal milling machine WAGNER FCA 400 & 3-axis digital from a testing workshop - Year of manufacture 2008 Hfodpez St Hqofx Ag Sjn - CE marking - 3-axis digital display - Travel ranges X/Y/Z 450x400x400mm - Fixed angular table 740x320mm - Automatic feed rates in all three axes - Rapid traverse - Speed range 40 - 2000 rpm - Tool holder ISO 40 - Vertical milling head with drilling quill - Safety handwheels - Coolant system - Horizontal counter bearing - Work light - Machine feet Dimensions: L x W x H 1.4 x 1.2 x 1.9 meters / Weight 1800 kg Errors and omissions excepted.

Condition: excellent (used), load capacity: 2,000 kg, Height-adjustable welding positioner with a load capacity of 2 tons, including infinitely adjustable clamping extensions and clamping jaws. Condition: very good. Speed, height, and tilt are infinitely adjustable. Hand and foot remote control. Hjdezk Ra Tepfx Ag Sofn Welding current transmission: 600 Amperes. Dimensions: Length: 1940 mm Width: 1200 mm Disc diameter: 1200 mm Height (tilted): min. 700 mm, max. 1550 mm Height (horizontal): min. 900 mm, max. 1700 mm Weight: 1750 kg.

Condition: excellent (used), functionality: fully functional, from an EDM (electrical discharge machining) machine Travel in X: 220 mm Travel in Y: 160 mm Mitutoyo 2-axis digital readout with a display accuracy of 1/1000 mm . Base without evaluation . Hfsdpfx Agsz Euqie Son

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 1,000 kg, 1000 kg load capacity complete set including hand and double foot remote control 3-axis welding rotary table, height adjustable with through hole 200mm Plate diameter 900mm with T-slots alternatively with screwed on solid perforated plate 2000 x 1000 x 200mm, thickness 20mm, hole pattern 100mm, diameter 28mm Height horizontal min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Speed from 0.01 - 1.1 rpm Hodpfevllhrsx Ag Sefn Inclination up to 135° Hand and double foot remote control with speed display very robust Price is without accessories, accessories with very reasonable surcharge Table top surcharge €1900 (only in conjunction with positioner)

Condition: ready for operation (used), load capacity: 750 kg, 3-axis welding positioner, 750 kg load capacity, control panel Hfedexxvgzjpfx Ag Son Tilt and speed infinitely adjustable from 0.05 to 1.0 rpm Clamping plate diameter: 0.8 meters Height when tilted to center min. approx. 0.45 m + 0.1 m base, max. 1.1 + 0.1 m base Height horizontal min. approx. 0.56 m + 0.1 m base Length 2.0 m, width 1.05 m

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 4480, total length: 14,500 mm, total width: 7,800 mm, total height: 3,500 mm, overall weight: 20,000 kg, Reichenbacher Machining Center VISION III-TT-L – 5-Axis, 3-Axis, MBG8, 5x SNA Equipment: 5-Axis Unit with Cardanically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 3-Axis Unit with Vertically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 8-Spindle Drilling Unit (1 unit): L-Shape, Grotefeld Drill spindles: individually selectable Rotation direction: clockwise/counterclockwise Hjdpfx Aoywzq Seg Sjfn Pitch: 32 mm Power: 2.5 kW Speed: 5,000 rpm fixed Z-axis stroke: +75 mm Holder: D = 10 mm H7 Plunge stroke: 80 mm Grooving Unit (5 units): GROTEFELD Angle Saw Unit F100-S The working/milling stroke is pneumatic. Drive: three-phase motor with multi-ribbed belt LEFT version Drive rotation direction: clockwise/counterclockwise Speed reduction: 1:2.86 – belt drive Power: 2.20 kW – 220-240/380-415 V – 50 Hz Speed: n1 = 2,800 rpm, n2 = 8,011 rpm at 50 Hz Spindle power: 2.2 kW Feed: 150 mm Tool holder: Ø30 x 1.5 mm – 5.0 mm Tool holder rotation: opposite to drive rotation direction Feed force: 2565 N Underfloor Drilling Unit in Machine Bed (1 unit): GROTEFELD Angle Milling Head G06-1.1-P The working/drilling stroke is pneumatic. Drive motor: 1.1 kW 220-240/380-415 V 50-100 Hz Drive rotation direction: clockwise Speed reduction: 1:1.55 gear drive Drive speed: 2,800 – 5,600 rpm Tool spindle speed: 4,340 – 8,680 rpm Tool holder: 1x HI-Q/ERM25 DIN6499-C (8°) For ER25 collet DIN 6499-B Ø0.5–16 mm max. Tool holder rotation direction: clockwise Flange clamping piece: FK45 Feed slide: with pneumatic cylinder and double steel guideways Feed: 80 mm

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, pivoting range: 135 °, Equipment: foot remote control, 3-axis welding positioner Protec KT 10 000 HV Complete set incl. hand and dual foot remote controls Digital speed display Hydraulic height adjustment Tilting range 0 to 130° Dimensions: Min. tilted height: 1050 mm Max. tilted height: 2200 mm Min. horizontal height: 1360 mm Hedoxt Tgnjpfx Ag Sjfn Clamping plate diameter: 2000 mm Length: 3250 mm, width: 1700 mm Speed from 0.05 to approx. 0.6 rpm (range from 0.05 to 1.2 rpm possible)

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Hsdpfx Asz A Aw Sjg Ssfn

Condition: excellent (used), Year of construction: 2007, Manufacturer: DECKEL MAHO Model: DMU 50 Year of manufacture: 2007 Machine type: Vertical machining center Application area: Milling Location: Germany Condition: As is, where is Control system: Heidenhain ITNC 530 Number of axes: 5 Travel of X-axis: 500 mm Travel of Y-axis: 450 mm Travel of Z-axis: 400 mm Main spindle speed: 10,000 rpm Spindle speed range: 20 – 10,000 rpm (variable) Tool changer: Chain magazine with double gripper Tool magazine capacity: 30 tool positions Max. tool diameter: 80 – 130 mm (depending on speed) Max. tool length: 290 mm Max. tool weight: 6 kg Table type: Digital swivel-rotary table Table dimensions: Ø 630 mm x 500 mm Max. table load: 200 kg Swivel range of the table: -5° to +110° (total 115°) Drive power: 9 kW (100 %) / 13 kW (40 % duty cycle) Torque: 82 Nm (40 % duty cycle) Measuring system: Direct linear measuring system Input resolution: 0.01 mm Positioning tolerance: 0.010 mm Rapid traverse: 24 m/min Feed rate: 20 m/min Coolant tank capacity: 80 l Electrical connection / Power consumption: 17 kVA Maximum current: 28 A Fuse / Network protection: 35 A Voltage: 400 V / 230 V / 24 V Frequency: 50 Hz Installation dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm Transport dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm Transport weight: 4,050 kg Manufacturer: DECKEL MAHO — Model: DMU 50 (2007). Machine type: Vertical machining center for milling applications. Condition: As is, where is. Control system: Heidenhain ITNC 530. Number of axes: 5. Axis travels and table: X = 500 mm, Y = 450 mm, Z = 400 mm. The machine is equipped with a digital swivel table (Ø630 mm x 500 mm) with a maximum table load of 200 kg and a swivel range of -5° to +110° (total 115°). Spindle and tools: Main spindle speed up to 10,000 rpm with a variable speed range of 20–10,000 rpm. Tool changer: Chain magazine with double gripper; tool magazine capacity 30 positions. Max. tool diameter depending on speed (80–130 mm), max. tool length 290 mm, max. tool weight 6 kg. Drive and accuracy: Drive power 9 kW (100%) and 13 kW (40% duty cycle), torque 82 Nm (40% duty cycle). Measuring system: direct linear measuring system. Input resolution 0.01 mm and positioning tolerance 0.010 mm. Feed and auxiliary systems: Rapid traverse 24 m/min and feed rate 20 m/min. Coolant tank capacity 80 L. Electrical and transport: Electrical connection / power consumption 17 kVA; Maximum current 28 A; Fuse/protection 35 A; Voltages 400 V / 230 V / 24 V at 50 Hz. Installation dimensions: 4,860 mm x 4,350 mm x 2,424 mm. Transport dimensions: 2,210 mm x 2,120 mm x 2,150 mm. Transport weight: 4,050 kg. Hedpfez An S Rjx Ag Sofn

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DELEM DA 69T control system The machine was distributed by Knuth and manufactured in Turkey. Press force 135 t Bending length 3,100 mm Distance between uprights 2,600 mm Overhang 410 mm Stroke 265 mm Opening width 485 mm Table width 108 mm Travel of X-axis 700 mm Rapid traverse 120 mm/s Bending speed 9 mm/s Return speed 95 mm/s Drive power Main drive 15 kW Hydraulic tank volume 250 l Dimensions (L × W × H) 3.95 × 1.95 × 2.81 m Weight 9,000 kg Some punches and dies are included in the scope of delivery (see pictures). Hfedpfxez Hmxus Ag Sjn Inspection with the machine running is possible.

Condition: used, Year of construction: 2020, Slider length: 3000 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring saw: no Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut ruler display: scale Crosscut ruler with miter function: yes Saw blade diameter: 450 mm Speeds: Vario Motor power: 5.5 kW Hodpez A D Uxofx Ag Ssfn Dust extraction connection: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 1200 kg

Condition: new, Year of construction: 2024, 1000 kg load capacity complete set incl. hand and double foot remote control Height-adjustable welding turntable with through hole 200mm Plate diameter 900mm Horizontal height min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Hfodpfx Ager Tr A Uo Sjn Speed from 0.01 - 1.1 rpm Tilt up to 135° Hand and double foot remote control with speed display Very robust Chucks available at extra cost depending on model and size

Condition: excellent (used), functionality: fully functional, load capacity: 1,000 kg, 3-axis welding positioner with hydraulic height adjustment, load capacity 1000 kg, remote control. Clamping plate diameter 900 mm, excellent condition. Speed, height, and tilt infinitely adjustable. Height with vertical plate min. 635 mm, with horizontal plate min. 800 mm, height with vertical plate max. 1360 mm, with horizontal plate max. 1500 mm. Hjdpfx Agsylihyo Sefn

Condition: used, maximum load weight: 27,020 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 09/2009, loading space width: 2,480 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Construction description* Manufacturer: Schwarzmüller, Type: X303 / X-Series * 3-axle semi-trailer, vehicle class O4 * High-quality steel frame welded construction * Wheelbase 1,310 / 1,310 mm * Overall length approx. 13,840 mm * Overall width approx. 2,550 mm * Overall height approx. 4,000 mm * Fifth wheel height approx. 1,200 mm * Distance from kingpin to center of 1st axle: 6,440 mm * Track width front and rear: 1,950 mm each * 12 pairs of recessed lashing eyes according to UVV * 2 mechanical support winches at the front * Rear impact protection * 2 chock blocks * Retractable drawbar hook at the rear * Plastic mudguards * Aluminum combination rub rail * Steel underrun protection * Lateral impact protection * Spare wheel holder * Plastic toolbox * Rear marker boards Chassis* Air suspension low-loader unit * Low-maintenance drum brake axles * Lifting and lowering device * 3 axles with single tires * Tires 235/75 R17.5 140J * Steel rims 6.75 x 17.5 inches Braking system* Two-line compressed air braking system * With automatic load-dependent brake force control * With ABS and EBS * Operating pressure 6.5 bar * Spring-loaded parking brake * Parking brake on the 2nd and 3rd axles Floor* Wooden floor made of spruce, laid lengthwise with tongue and groove * Screen-printed top layer with flush outer frame Body and sliding tarpaulin* Fixed aluminum hollow profile front wall * Front wall with aluminum corner posts * Bolted rear portal with aluminum corner posts * Double doors at the rear * 6 sliding center posts * 4 rows of locking slats * Bilateral plastic sliding tarpaulins * Strap reinforcement with direct tensioning buckles * Front and rear rod tensioning closure * Tensioning gear at the front * Eccentric locking mechanism at the rear * Edscha sliding tarp system "LITE" * Bilateral aluminum special guide rail profile * Light-transmitting plastic tarpaulin roof Hjdoz Shibopfx Ag Sefn Electrical system* 24-volt electrical system * 7-chamber tail lights * Design according to EU directives Paintwork* Steel grit blasting * Zinc dust primer * Painting with 2-component commercial vehicle acrylic paint * Color of chassis and body: Gray Weights* Technically permissible total weight: 39,000 kg * Permissible total weight according to vehicle data sheet: 34,000 kg * Permissible payload according to vehicle data sheet: 27,020 kg * Unladen weight according to vehicle data sheet: approx. 6,980 kg * Fifth wheel load: 12,000 kg * Axle load: 3 x 9,000 kg

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis 360° rotation, 360° tilting (overhead), with height adjustment (virtually silent) Excellent condition (like new) Minimum height: approx. 486 mm (tilting axis 0° horizontal) Maximum height: approx. 1438 mm (tilting axis 0° horizontal) Minimum height: approx. 525 mm (tilting axis vertical) Maximum height: approx. 1477 mm (tilting axis vertical) Lower arm length 1500 mm (radius) Hjdeyupl Djpfx Ag Sjfn Upper arm length 1900 mm (radius) Connection: 16 A plug Overall height 3250 mm Rotational speed approx. 0.2 - 2.0 rpm Torque 24000 Nm Lifting speed 1.5 m/min Handheld remote control

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Hjdpovvi N Iofx Ag Sjfn

Condition: ready for operation (used), Year of construction: 2017, A Reichenbacher CNC multi-spindle woodworking center with automatic support table and vacuum pins is available. Traverse path X1/X2: 8540mm, traverse path Y1: 2500mm, traverse path Z1: 480mm, swivel B: 180°, swivel C: 360°, X3 axis: underfloor drilling unit, U2-U10: carrier movement 1-9 (gantry), axis speed X/Y/Z: 60m/60m/20m/min, turning speed B/C: 90°/s, table dimensions X/Y: approx. 8500mm/2600mm, max. workpiece weight: 150kg, max. workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9. Workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9, suction plates per carrier: 8, suction plate diameter: 100mm, carrier positioning: +/-1000mm, min. carrier distance: 300mm, total vacuum pump number: 72, vacuum pump stroke: 100mm, vacuum pump useful stroke: 25mm, tool positions: 24, max. tool weight: 6kg, max. tool length: 240mm, max. tool diameter: 300mm. Total system dimensions X/Y: approx. 15000mm/8000mm, weight: approx. 20000kg. Documentation available. On-site inspection is possible. Expected to be available from the end of September 2025. Hjdpfow Azuzsx Ag Sefn

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- Machine already professionally dismantled and stored at our warehouse in Oberkochen: - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Hfsdpszqggvefx Ag Ssn Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR B...

Condition: used, Year of construction: 2004, Carriage length: 2250 mm Cutting width at rip fence: 1040 mm Cutting width at crosscut fence: 2900 mm Cutting depth: 154 mm Scoring unit: yes Saw blade height adjustment: electric / position control Saw blade tilting adjustment: electric / position control Rip fence adjustment: electric / position control Hfjdpfey Ai I Nsx Ag Sjn Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Crosscut ruler display: digital readout Crosscut ruler with mitre function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction connection: 80 and 120 mm Machine length: 2200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, empty load weight: 6,500 kg, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 06/2010, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Vehicle is sold on behalf of a customer, partly wooden boards def., 17 pairs of lashing eyes, , loading height approx. 900 mm, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hfedpfx Ajz Stnhjg Sen

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Hfjdpfxoz Stnne Ag Son

Condition: new, Year of construction: 2024, Welding positioner Protec KT 10 000 HV Complete set including hand-held and dual-pedal remote control Digital display for speed Hydraulic height adjustment Tilting range from 0 to 130° Dimensions: minimum height when tilted: 1080mm maximum height when tilted: 2200mm minimum height in horizontal position: 1400mm diameter of the clamping plate: 2000mm length: 3250mm, width: 1780mm Hjdpfxsk S D N Ee Ag Sjfn speed from 0.05 to approximately 0.6 RPM.

Condition: like new (used), Year of construction: 2006, operating hours: 500 h, functionality: fully functional, Control unit: SIEMENS Sinumerik 840D Solutionsline Table clamping surface: 650 x 410 mm Max. table load: 250 kg T-slots: 3x 14 mm X-axis travel: 560 mm Hfedpfx Agsy U Hw Ej Sen Y-axis travel: 410 mm Z-axis travel: 410 mm Spindle speed range: max. 12,000 rpm Spindle drive power: 12 / 18 kW Tool magazine capacity: 24 positions Max. tool diameter: 77 mm Max. tool diameter (with vacant adjacent slots): 125 mm Max. tool length: 200 mm Max. tool weight: 5.0 kg Tool change time: approx. 1.3 sec Rapid traverse (X / Y / Z): 48 m/min Total power requirement: approx. 30 kW Machine weight: approx. 4.0 tons Required floor space: approx. 3000 x 2000 x 2500 mm Equipment and Accessories: - NC rotary table (2-axis) - Coolant system - Spindle chiller - Machine feet The machine is located in our showroom and can be inspected under power. It has very little working hours since it was in a technical school's workshop.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2024, suspension: air, tire size: 385/65 R22,5, front tire size: 385/65R22,5, rear tire size: 385/65R22,5, KRONE Cool Liner 3-axle refrigerated semi-trailer, SDR 27 eL4-DS, Krone axles. 1st axle is a lift axle. LED taillights. 2 roll-compression buffers (4 rollers per side). Pallet box (for 36 pallets). Tool box. Duoplex floor. Body length (overall): 13,311 mm. Body width (overall): 2,490 mm (=flower width). Interior height: 2,630 mm. 1 row of slotted-hole lashing rails at 780 mm. Double-deck rails. Refrigeration unit: Thermo King SLX i 300-50, diesel/electric. Sale exclusively to commercial enterprises, with no warranty of any kind. Subject to errors and prior sale. Hsdpfx Aoz Sp Hmog Sofn