Used Small Device for sale (14,290)

Condition: ready for operation (used), functionality: fully functional, power: 22 kW (29.91 HP), Steam boiler LOOS DF 600kg/h renovation! EPS EXPANDER continuous operation 600kg/h 15g/liter electric power 22KW Hodpfx Akeu U Ad Rsrjfn EPS bead storage 300 m3

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Hjdscnw T Ijpfx Akrjfn Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: used, functionality: fully functional, overall weight: 3,000 kg, operation weight: 3,000 kg, maximum load weight: 3,000 kg, empty load weight: 3,000 kg, loading space volume: 18 m³, loading space width: 2,000 mm, loading space length: 3,000 mm, loading space height: 3,000 mm, Year of construction: 2022, operating hours: 2,000 h, machine/vehicle number: K22092001, ## Complete Nitrogen Generation System – Generator + High-Pressure Booster + Chiller For sale: a complete industrial nitrogen generation and high-pressure supply system, designed for use with high-power fiber laser cutting machines. The system allows nitrogen to be generated on-site and supplied to the laser at the required high pressure, significantly reducing dependence on liquid nitrogen deliveries. ### Complete system includes: * Nitrogen generator * High-pressure nitrogen booster * Industrial chiller / cooling system * Control system * Filtration and necessary system components ### Technical specifications: Nitrogen generator * Nitrogen purity: up to [99.99%] * Nitrogen capacity: [30 Nm³/h] * Outlet pressure: [8 bar] Hfsdezv T Abspfx Akren * Automatic operation High-pressure booster * Maximum nitrogen pressure: [200 bar] * Capacity: [25 Nm³/h] * Designed for continuous industrial operation * Suitable for fiber laser cutting applications Chiller * Cooling capacity: [XX kW] * Designed for cooling the nitrogen booster/system * Industrial continuous-duty design ### Application The system was used for supplying nitrogen to a high-power fiber laser cutting machine. Suitable for laser cutting of: * Stainless steel * Aluminum * Carbon steel and other materials where high-pressure nitrogen cutting is required The equipment is sold as a complete system. Condition: Used, fully functional Location: Lithuania Availability: Immediately available The system can be inspected and tested on site. More photos, videos, and detailed technical specifications are available upon request. Worldwide transport can be arranged.

Condition: used, Electric Loading Lift - Mobilift for ergonomic handling of small loads Pedestrian stacker, pallet stacker Hfsdpjpcqdwefx Akren Manufacturer: TransOrt Model: PRO 140 M Serial No.: P14012557 Year of manufacture: 2018 Rated capacity: 140 kg (with 400 mm outreach) Lifting stroke: 1380 mm Lifting cycles per charge: 140 kg x 1 m x 100 times Lift height: max. 2900 mm (underside of jib) Lifting speed (fast / slow): approx. 100 / 50 mm/s Outreach (load handling device): 890 mm Chassis length: 1100 mm Chassis width: 440 to 740 mm adjustable (internal measurement) Chassis height: 85 mm Underride length: 620 mm Chassis design (front / rear): Ø 80 / 125 mm (2 fixed / 2 swivel castors) Total length: 1450 mm Total width: 635 mm Overall height: 1980 mm Maximum height: 2980 mm (with lifting device extended) Battery capacity: 24 V / 18 Ah - Electric lifting drive via toothed belt with safety mechanism that stops the descent via freewheel as soon as the load contacts an obstacle. - Cable remote control with spiral cable and buttons for 2 lifting speeds - Control panel with emergency stop, on/off, and battery status indicator - Battery pack with quick-change system - 2 x 12 Volt, 18 Ah lead-acid batteries installed in battery pack - Integrated charger 24 VDC, 80 Watts - Manually maneuverable, steering castors with three-level parking brake - Continuously height-adjustable handle - Load pickup quick coupling TAWI system - Flange plate for quick coupling on the jib 30 x 340 mm with 5x M8 threaded holes Net weight of loading lift: 75 kg Installed lifting aid: Counterbalance jib made of 60 x 40 x 3 mm rectangular stainless steel tube Lifting aid capacity: 50 kg Outreach to handle: 865 mm Hanging handle with knurled nut Net weight: 13 kg As new condition, unused ex stock 2 units available, price per unit

Condition: good (used), Year of construction: 1957, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator Hfsdpez Szkwofx Akrsn -Manufacturer: M.Heitze / Deuma Heitze, Container rotating device, welding rotating device type 405/0 -Load capacity: kg -Roller spacing: 240 - 780 mm -Rollers: Ø 185 x 105 mm -Rolling speed: 0.15 to 0.70 m/min Right/Left rotation -Control unit: with foot switch -Individual components: see photos -Transport dimensions: 1160/920/H785 mm / 600/540/H785 mm -Weight: 411 kg / 221 kg

Condition: used, This listing is for a Gilson Pipetman Liquid Handling Device. The unit is in full working condition and is ready for immediate release. The Gilson Pipetman Liquid Handling Device is a well-known, precision liquid handling device commonly used in laboratories for transferring small amounts of liquids. It is a type of micropipette used to measure and dispense a specific volume of liquid, typically in the range of microliters (μL) to milliliters (mL). The Pipetman series is renowned for its accuracy, reliability, and ease of use. Features: - Adjustable Volume: The Pipetman is designed to allow the user to set and adjust the volume it will dispense, which provides flexibility for a variety of tasks. It typically has a volume range from 0.1 µL to 10 mL depending on the model. - Single Channel: The standard version is a single-channel pipette, meaning it is designed to handle one sample at a time, although multi-channel models are also available for higher throughput. - Ergonomic Design: The Pipetman is designed with ergonomics in mind, making it comfortable to use for long periods, which is important for minimizing hand strain and improving productivity. - Precision and Accuracy: The Gilson Pipetman is known for its high precision, with many models offering accuracy and precision to within a small percentage of the desired volume, which is crucial in scientific experiments. Hfsdpfx Ajxxx Sgokrsn - Durability: The Pipetman is robust and can withstand frequent use, making it ideal for laboratory environments. - Color-Coding: Pipetman models often use color-coded tips that correspond to different volume ranges, making it easier for users to select the correct pipette and tips for their needs.

Condition: used, Electric pallet stacker - pedestrian stacker, drawbar stacker for the ergonomic handling of small loads Manufacturer EXPRESSO, Model Lift & Drive 225P (lift2move) Serial No. 19500S, Year of manufacture 2008 Model No. Rated load capacity 225 kg Lifting stroke 1680 mm Lifting height 2200 mm Lifting speed (unladen / laden) approx. 100 / 75 mm/s Outreach of lifting device 861 mm Chassis length 1020 mm Ground clearance 90 mm Underneath length 600 mm Chassis design (front / rear) Ø 80 / 140 mm (2 fixed / 2 swivel castors) Overall length 1400 mm Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with coiled cable and 2 lifting speeds - Battery pack with quick-change system - Battery charge indicator - 2 units of 12 Volt, 17 Ah lead-acid batteries installed in the battery pack - External charger 24 VDC, 3 Amps (mains voltage 230 V, 50 Hz) - Can be moved manually, swivel castors with three-stage parking brake - Handlebar infinitely adjustable in height - Load receiving flange according to EXPRESSO standard Special version: lifting device from GIESLER for radial fan SC-1000 CP XT (Tiger) - Load capacity of the lifting device 25 kg - Lifting device can be swivelled 90° via manual hydraulic pump - Opening width between the support jaws 300 / 330 mm - Opening width between the clamping rollers 200 - 300 mm - Clamping is done via handwheel - Weight of the lifting device 60 kg Hfjdpfx Aoflt Edjkren Total weight 140 kg very good condition

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Hedpfeh Aw Rnox Akrofn Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Year of construction: 2009, condition: used, functionality: fully functional, Small-Format Production Line Parameters 2 Unwinders: Bielomatik: CSW: Pagomat: Bedo: CSI: Stretch Wrapper: Parent rolls 860 mm wide > longitudinal cut into 2x 430 mm strips > overlapped into 4 webs > longitudinal cut into 2x 210 mm strips + 2x 5 mm edge trim (suction system included) Mandrels for 150 mm (76 mm) cores; max. roll diameter 1500 mm 2-up A4 1-up A3 Max. 500 m/min. Punch unit for 2-hole/4-hole punching Automatic ream packaging machine with Nordson gluing unit and heating plates for film wrapping 26 reams/min. at max. 500 m/min. (Bielomatik system; designed for 32 reams/min.) Single-sided ream labeler (label size 35 x 150 mm, supplied from a roll) 5 reams per carton Nordson gluing unit for sealing carton bottoms and Hjdsz Sqa Ispfx Akrofn carton lids (fed from a flat-blank magazine) Includes a single-sided labeler for 80 x 150 mm labels (supplied from a roll) EPAL palletizing robot EPAL Pallet dimensions: 700 x 880 mm 4x12 A4 | 5x12 A4 | 5x8 A4 + 4x6 A3 | + 5x6 A3 | + 4x8 A3 Automatic stretch wrapper (500 mm film roll) + manual unloading and strapping

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Hedpfjcnw U Dox Akrsfn Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Tool presetting machine / used Manufacturer: Garant Type: VG1 Year of manufacture: 11/2022 Serial number: XXXXX • 15-inch touchscreen, intuitive and user-friendly operation via icons • With calibration equipment on the base plate • Digital camera with 24x magnification • Quick adjustment of both axes (X / Z) individually or simultaneously • Fine adjustment of both axes (X / Z) • Spindle with 4 x 90° indexing and spindle brake • Roundness and flatness error of the spindle max. 2 µm • With SK50 base adapter + HSK-A63 + VDI-30 adapter Technical data: • H x W x D: 1,060 x 400 x 860 mm • Weight: 150 kg • Measuring range X/Z: 400/500 mm Hodsz Sb Drepfx Akrefn • Includes label printer

Condition: good (used), Year of construction: 2020, functionality: fully functional, The Koch company’s material suction unit is available; the price is for one unit. All units are equipped with a level sensor, a material lock, and a funnel. There are 13 units in stock. Voltage: 24 V DC Height: 595 mm Weight: 12 kg Discharge connection: Nominal size: 40 mm Base size: Z5/Z12/Z24 Hjdpfsz Nxlmox Akrofn Level sensor Material lock

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing! Hfodpfxjwwzudj Akrsn

Condition: excellent (used), Year of construction: 2020, ZOLLER EZset 350 – Professional CNC Tool Setting and Measuring Device – 2020 Hfedpfxoz Si S Do Akren For sale is a professional ZOLLER EZset 350 measuring device, manufactured in 2020, designed for the precise setting, measurement, and inspection of cutting tools used in CNC machine tools. The ZOLLER EZset 350 is an industrial tool measuring system for offline tool measurement, enabling accurate determination of tool length, diameter, and geometry before machining. The device reduces CNC machine setup times, minimizes setting errors, and increases production efficiency. Technical data * Manufacturer: ZOLLER – Germany * Model: EZset 350 * Year of manufacture: 2020 * Type: CNC tool setting and measuring device (Tool Presetter) * Z-axis measuring range: up to 350 mm * Measuring system: optical, with camera * Control: computer-based with touchscreen * Software: ZOLLER pilot / Drive Snapshot 1.4 – according to the markings visible on the device * Computer panel: MOSTRON PPC3-13 * Device order number: EZS350C1T-00141 * Identification number: PMT0221 * Panel power supply: 12–24 V DC Device functions * Measurement of cutting tool length * Measurement of tool diameters * Inspection of CNC tool geometry * Setting of tool corrections * Optical measurement of cutting edges * Measurement of tools before mounting in the machine tool * Support for tool wear monitoring * Reduction of CNC machine downtime * Increased repeatability of settings Equipment shown in the pictures * ZOLLER EZset 350 measuring device * Integrated optical system * Computer panel with touchscreen * Tool holder / spindle for mounting tools * Work table with frame * Pneumatic system with pressure regulator * Label printer * Additional printer located under the table * Power and connection cables shown in the pictures Application The device is intended for use in: * CNC machining centers * CNC milling and turning machines * Tool rooms * Precision manufacturing plants * Automotive and aerospace industries * Tool preparation and quality control departments Technical condition The device is used, manufactured in 2020, and is in good visual condition. The device has a calibration mark dated 29.08.2024, valid until 29.08.2025. The set is equipped with a dedicated computer panel and measuring accessories. Inspection and testing of the device are possible by prior arrangement.

Condition: good (used), Year of construction: 1966, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heitze, container rotating device, welding rotating device type 406/2 G -Load capacity: kg -Roller spacing: 290 - 1100 mm Hfodpfez Ruwuox Akrsn -Rollers: Ø 225 x 300 mm -Rolling speed: 0.24 to 1.30 m/min Right/Left rotation -Control unit: with hand control and foot switch -Individual components: see photos -Transport dimensions: 1380/1110/H900 mm / 940/660/H900 mm -Weight: 706 kg / 463 kg

Condition: good (used), Year of construction: 2020, functionality: fully functional, The conveyor unit from Koch is for sale; 7 units are available. The price is per unit. Hodpfx Akez Nxfajrefn Supply voltage: 230V Power: 0.65 kW Weight: 3.4 kg Conveyor connection: NW -30mm Minimum air pressure: 4 bar

Year of construction: 2022, operating hours: 15 h, condition: used, functionality: fully functional, operation weight: 30 kg, feed force X-axis: 20,000 N, pipe diameter (max.): 14 mm, machine/vehicle number: 79000, Lancier Smart Wheel 2022, used very little Very few operating hours (approx. 38 hours) Includes extensive accessories Includes HONDA EU22i generator Includes cable guiding set 2.6 mm - 3.7 mm Includes cable guiding set 6.7 mm - 9.0 mm Includes drive wheel set without groove 0.8 - 3.4 mm Includes drive wheel set with groove 3.5 - 9.0 mm Includes steel transport box Includes compressed air hose with claw coupling, 10 m The blowing device Automatic logging For cable diameter 1.5 - 9 mm For outer pipe diameter 7 - 14 mm Blowing speed 0 - 100 m/min Thrust force 20 daN L x W x H 500 x 400 x 400 mm Hfjdpfezphdtex Akren Weight: approx. 30 kg Order no. 79000

Condition: good (used), The ALFRA PSG 5+ profile rail cutting device was manufactured in 2015 and is equipped with a hydraulic attachment. The length stop enables precise, repeatable cutting of profiles. An ALFRA 120 electro-hydraulic pump is connected to the hydraulic attachment and is included in the offer. The workbench is also part of the package. The device has been function-tested and has an electrical inspection performed by an electrical company. Hodpfxjz N Smdo Akrjfn

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Vacuum lifter from Schmalz for handling flat materials with a suction cup. Maximum lifting capacity: 125 kg. Schmalz model: MOD-VM-BASIC-125/250, BB-VM-BASIC-600-HI Hsdpfxez Nplke Akrofn Adjustable suction cup, maximum dimensions: 1600 x 750 mm Suction cup diameter: 220 mm Vacuum pump: EVE-TR 4 AC 3 Operating lever Mounted on a stand with 4 wheels.

Year of construction: 2016, condition: used, Four identical retarder prover chambers for bakery applications are offered. Equipped with a shared control cabinet. Inspection possible by arrangement. Hfedpoz Irlvsfx Akrsn

Condition: ready for operation (used), functionality: fully functional, Description: A complete compression testing station, consisting of a 20T hydraulic press from RYS and a professional measuring system from AXIS, including a ZEMIC strain gauge. The equipment comes from a SHILOH production plant that is being decommissioned in Bielsko-Biała. It was used for force insertion tests, strength tests, and quality control. The set includes: RYS FR-5019 hydraulic press – 20T AXIS force meter – PEAK, PRINT functions, units in kg/N/lbs ZEMIC load cell (strain gauge) – range 2000 kg Blocks, fixtures, and tools as shown in the pictures Analog pressure gauge Hydraulics and hoses Table height adjustment on bolts Applications: Force insertion tests Laboratory testing Quality control and R&D Assembly and disassembly of components Hedoz Rvywspfx Akrofn Design workshop / toolroom

Year of construction: 2023, condition: excellent (used), Professional pneumatic device for emptying SEMCO 600 ml cartridges and containers, designed for industrial applications (adhesives, sealants, pastes, high-viscosity materials). Manufacturer data: • Manufacturer: axiss GmbH (Germany) • Type: 9110 / B-SEMCO600-PN-KM-F • Year of production: 2023 • Serial number: 514 • Quality standard: DIN EN ISO 9001:2015 • CE marking Technical description: • Pneumatic emptying of SEMCO 600 ml cartridges • Robust construction on an aluminium profile mounting plate • Piston assembly with transparent sleeve (position control) • Pressure regulator with pressure gauge • Directional control valve • Pneumatic quick couplings • Shut-off valve (safety) • Vertical or horizontal mounting possible • Smooth and controlled operation Hfjdpfxjz Slmws Akrjn

Year of construction: 2004, condition: used, functionality: fully functional, For sale: Peripheral equipment for plastic injection molding. The grinders, mills, and temperature control units were in operation until 03/2026 and have been replaced by a new machine park. 3 units Wanner grinders, Compact series C17.26, year of manufacture 2006 2 units Kurtz grinders, SR 173, year of manufacture 2002 Hfodpfxoz Hvgbs Akren 9 units Kurtz K-mills, SR 171, year of manufacture 2003 10 units Wieser mills, WG-SR 170/110, year of manufacture 2003 1 unit Colortronic M102L sprue grinder, year of manufacture 2006 20 units HB-Term temperature control units, HB-CW 90, year of manufacture 1999 1 unit Wittmann temperature control unit, Tempro 1 TP 140, TS001537/001, year of manufacture 2000 1 unit Wittmann temperature control unit, Tempro basic 140, TS002073/001, year of manufacture 2000 3 units Wittmann temperature control unit, Tempro 2, year of manufacture 2000 Conveyor belts as shown in the picture Operating manuals available Complete purchase of all items preferred; individual purchase possible by agreement.

Condition: excellent (used), For sale: Professional setting device for internal micrometers SUBITO – Schwenk ESU. Very good condition, complete set in original wooden case with manual. • Model: SUBITO Einstellgerät ESU • Manufacturer: Oskar Schwenk GmbH, Germany • Complete equipment • Stable cast iron base • Precise adjustment and micrometric feed • Ideal for setting SUBITO, ESS, ESU internal micrometers • The whole set is in as-new condition Hfodpjz Slkpjfx Akrsn

Condition: good (used), functionality: fully functional, Year of construction: 2016, This is a professional, mobile cleaning device for injection molding machines and temperature control units. It can effectively flush out contaminated and scaled channels. Upon request, an operating manual for the system can be sent by email. Features of the system: Two-container system made of stainless steel, 1 container for descaling and container 2 for neutralizing agent. Pulsating cleaning through air impulses. Hfedsz Szn Nepfx Akrjn Process monitoring. Reduces cooling times in injection molding by up to 40%.