Used Find for sale (2,00,000)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding width: 1,350 mm, working height: 900 mm, workpiece height (max.): 150 mm, grinding belt width: 1,370 mm, TECHNICAL DETAILS Sanding width: 1,350 mm Working height: 900 mm Workpiece thickness: max. 150 mm Lodpfxoxwnbbs Aaajhp Abrasive belt width: 1,370 mm Belt speed: 18 m/s Contact roller diameter: 140 mm Feed belt system: length 3,400 mm Feed belt system: width 1,350 mm MACHINE DETAILS Weight: approx. 3,000 kg 1st unit: 18.5 kW 2nd unit: 15 kW Machine resistance: approx. 800 Pa Operating pressure: 6.8 bar Air consumption: approx. 28 l/min Feed drive: 0.7/0.9 kW (2 speeds) Feed speed: steplessly adjustable: 2.5–13 m/min EQUIPMENT Segmented sanding pad Combination unit

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, load capacity: 20 kg, TECHNICAL DETAILS Robot payload: 20 kg EQUIPMENT Ledsxt H Daopfx Aaaohp Floor scanner Lift table

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 11598, controller model: SIEMENS 840D, laser power: 2,400 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TRUMPF laser cutting system including LoadMaster! Submitting a bid requires collection by the deadline at the end of November! TECHNICAL DETAILS Lhjdpjxu Ihisfx Aaasp Axes X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm Working area: 3,000 x 1,500 mm Laser and Power Laser output: 2,400 W Laser unit: TLF 2400 TURBO MACHINE DETAILS Control: SIEMENS 840D Electrical Data Mains connection: 400 V / 50 Hz Connected load: 71 kVA Control voltage: 24 V Main fuse: 3 × 125 A Compressed Air and Gas Connections Compressed air connection: 6 bar Nitrogen (N₂) connection: 30 bar Oxygen (O₂) connection: 20 bar Dimensions & Weight Dimensions (L x W x H): 9,800 x 5,300 x 2,000 mm Weight: 11,500 kg EQUIPMENT LoadMaster

Condition: ready for operation (used), Year of construction: 2010, operating hours: 49,479 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 7,500 rpm, turning diameter: 210 mm, turning length: 100 mm, TECHNICAL DETAILS Max. turning diameter: 210 mm Max. turning length: 100 mm Max. swing diameter over bed cover: 210 mm Travel X-axis: 400 mm Travel Z-axis: 200 mm Max. workpiece length: 100 mm Max. workpiece diameter: 27 workpieces with 30–85 mm or 18 workpieces with 30–130 mm Max. main spindle speed: 7,500 rpm Main spindle power at duty cycle 10–40/100% max.: 25/16 kW Main spindle torque at duty cycle 10–40/100% max.: 200 Nm Main spindle front bearing diameter: 80 mm Main spindle flange size: Size 5 (DIN 55026) Axes at main spindle unit: X/Z Turret: bottom Number of stations/driven stations: 12/12 Tool mounting in turret: VDI 40 Rapid traverse speed X-axis: 60 m/min Rapid traverse speed Y-axis: 30 m/min Feed force in X/Z main spindle unit: 5,000 N Direct linear measuring system main spindle unit: X/Z MACHINE DETAILS Control: Fanuc 18i TB Electrical Data Operating voltage: 400/50 V/Hz Main fuse: 80 A Total connected load: 36 kVA Dimensions & Weight Machine dimensions (LxWxH): approx. 2,500 x 1,900 x 2,300 mm Lhsdpfxjxu Ekbo Aaasp Overall system footprint (LxWxH): approx. 3,600 x 1,900 x 2,300 mm Machine weight: approx. 6,000 kg Operating hours: approx. 49,479 h EQUIPMENT Full-stroke cylinder on main spindle Splash guard enclosure with fully encapsulated working area Work area lighting Oil/emulsion mist extraction system Hinged belt chip conveyor (discharge height: 1250 mm) Coolant system Circulating parts storage conveyor Automatic central lubrication

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning length: 850 mm, spindle bore: 103 mm, spindle speed (max.): 3,000 rpm, turning diameter over bed slide: 600 mm, controller model: Sinumerik 840 D, TECHNICAL DETAILS Lhjdpfoxt Rkqsx Aaasp Turning length: 850 mm Swing diameter over bed: 600 mm Turning diameter with external tools: 290 mm Spindle speed range: 30 – 3,000 rpm Main spindle head: Size A8 according to DIN 55026 Spindle diameter at front bearing: 150 mm Spindle bore: 103 mm Tailstock (NC-controlled) Thrust force: freely programmable 3,000 – 8,000 N Quill taper: MT4 Tool turret for driven tools Cylindrical shank mountings: 12 units according to DIN 69880-40x63 Positions with driven tool holders: 12, radially mountable Power: 5 kW at 100% duty cycle Torque: max. 20 Nm Speed range: 20 – 4,000 rpm C-axis Speed range: 0 – 800 rpm Max. angular specification: 9,999.999° Input increment: 0.001° Steady rest slide Guiding diameter range: 8 – 101 mm MACHINE DETAILS Control: Sinumerik 840 D EQUIPMENT 2 upper tool turrets SMW 225 3-jaw power chuck Chip conveyor with cooling unit Oil mist extraction Loading hatch for top-side loading and unloading

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, resolution (max.): 2,400 dpi, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², paper width (max.): 330 mm, paper height (max.): 487 mm, Original purchase price of the printer was €486,000 net! The machine was relocated to ensure smooth processing. The auction end date has been postponed to 26.11.2025 due to increased demand for current images. TECHNICAL DETAILS Print resolution: 2,400 × 2,400 dpi Print speed: 100 images per minute Recommended monthly print volume: 100,000 – 450,000 pages Maximum monthly print capacity: 1,500,000 pages Supported paper sizes min.: 182 × 182 mm Supported paper sizes max.: 330.2 × 487.7 mm Paper weight range: 60 gsm to 350 gsm Paper weight range (with validation): up to 400 gsm Duplex printing media weight: 350 gsm MACHINE DETAILS Standard paper feed capacity: 1,000 sheets Total capacity expandable up to: 10,000 sheets Lodjxtalkepfx Aaajhp Dimensions main unit C10000 (H x W x D): 145.5 cm x 258.6 cm x 115.3 cm FEATURES Offset-like print quality Compatible with specialty and textured media In-line sensors for color management Automatic calibration

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 199583, clamping force: 1,800 kN, screw diameter: 35 mm, injection pressure: 1,595 bar, ejector force: 80,000 N, opening stroke: 1,050 mm, TECHNICAL DETAILS Clamping force: 1,800 kN Platen size (H x V): 880 x 830 mm Minimum mold height: 300 mm Maximum opening stroke: 1,050 mm Maximum ejector stroke: 180 mm Ejector force: 80 kN Injection unit Screw diameter: 35 mm Shot volume: 154 cm³ Maximum screw speed: 320 rpm Injection pressure: 1,595 bar Injection rate: 151 cm³/s Nozzle stroke: 500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,720 x 1,350 x 2,020 mm Net weight (incl. control cabinet): 11.7 t EQUIPMENT ENGEL ecodrive SHV2 (servo-hydraulic drive) Quick-clamping system Core pull control Thermoset package Lhedpfoxuqh Sex Aaajp ENGEL Viper 40 robot integrated with RC200-A03 control ROTOFEEDER BMC50 with frequency converter and dedicated programming interface Microcomputer CC200 with 15'' TFT color touchscreen

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 06601, feed rate X-axis: 12 m/min, empty load weight: 2,500 kg, Equipment: CE marking, TECHNICAL DETAILS Maximum edge banding thickness: 12 mm Minimum workpiece thickness: 10 mm Maximum thickness of roll material: 3 mm Feed speed: 12 m/min Heating time: 10 min Guillotine for trimming: 0.2 – 3.0 mm MACHINE DETAILS Ledpfx Aasxuqwmjajhp Dimensions & Weight Dimensions (L x W x H): 6,500 x 1,000 x 1,600 mm Weight: 2,500 kg EQUIPMENT Jointing unit with 2 milling units Automatic roll magazine Solid edge magazine Pre-heating of panels by infrared heater Automatic gluing with granulate glue pot Cross-cut saw with programmable angle setting Multi-function unit Corner rounding/copying unit with 2 motors Profile scraper Flat scraper Buffing unit Unit indicator with mechanical numeric display Control via operator panel Operation via selector switch / push buttons Protective hood CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 3,870 h, load capacity: 3,200 kg, lifting height: 3,300 mm, free lift: 1,450 mm, mast type: duplex, Equipment: sideshift, No reserve price – guaranteed sale to the highest bidder! The forklift's tyres, tubes, and seat have been replaced. TECHNICAL DETAILS Duplex lift height: 3,300 mm Free lift: 1,450 mm Load capacity: 3.2 t MACHINE DETAILS Overall height: 2,160 mm Unladen weight: 4,637 kg Operating hours: 3,870 h EQUIPMENT 3rd valve Ledpfexvpr Sex Aaaehp Side shifter New starter battery

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 220.01.016.22, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, rotary table diameter: 750 mm, rotational speed (max.): 12,000 rpm, The machine is being auctioned due to a business closure! Further details on the machine’s equipment can be found in the attached order confirmation. TECHNICAL DETAILS Workpiece height: 8–60 mm Rotary table edge magazine diameter: 750 mm Edge banding material (coil): 0.4–3 mm Rotary table diameter for coil edge material: 740 mm Support surface (workpiece infeed): 600 mm Spindle speed of diamond pre-milling unit: 12,000 rpm Feed speed, chain feed: 10 and 18 m/min Spindle speed, cross-cut saw unit: 12,000 rpm Upper multifunctional milling unit speed: 12,000 rpm Lower multifunctional milling unit speed: 12,000 rpm Cutter assembly: 64 mm MACHINE DETAILS Electrical data Voltage: 400.0 V Phases: 3 Ljdpfx Aaoxwt Nqjashp Frequency: 50/60 Hz Current: 28.0 A Power: 15.0 kW EQUIPMENT Ball bearing rotary table for edge banding coil material Workpiece infeed and feed fence with manual adjustment Chain feed with two speeds Edge feeding for coil and strip material in single feed Upper and lower multifunctional milling unit x-motion PLUS via smartouch Upper and lower radius scraper blade x-motion PLUS Corner rounding unit with motorized adjustment for postforming and softforming profiles Upper and lower polishing units Pneumatic-mechanical infeed stop for workpiece gap monitoring glueBox application unit

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1058083, controller manufacturer: HAAS/FANUC, number of slots in tool magazine: 40, MACHINE DETAILS Tool changer: 40 positions Tool holder: BT40 Ledpfx Aexuikxeaajhp Control: HAAS/FANUC Electrical data Voltage: 360–480 V Phases: 3 Frequency: 50/60 Hz Full load: 20 A Maximum load: 35 A

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 207000044, paper weight (min.): 50 g/m², paper weight (max.): 300 g/m², production capacity: 19,680 unit/h, The original price of the printer was EUR 143,250! The machine has been relocated to ensure smooth handling. The auction end date has been extended to 26.11.2025 due to increased demand for up-to-date photos. Production printer with the following configuration: - Input Interface Module-B1 - Standard Paper Input Module-B1 - Optional Paper Input Module-B1 - Océ iHCS2.1 TopCover-B2 TECHNICAL DETAILS Print speed A4: up to 328 pages/minute Print speed A3: up to 171 pages/minute Maximum monthly print volume: up to 10,000,000 A4 pages Resolution: 600 x 1,200 dpi Paper specifications: Total paper weight range: 50 g/m² – 300 g/m² Plain paper (Canon recommended media): 50 – 300 g/m² Coated media (Canon recommended media): 80 – 250 g/m² Paper size: 203 x 203 mm to 350 x 500 mm MACHINE DETAILS Main unit dimensions (W x D x H): 1,439 x 1,070 x 1,225 mm Main unit weight: 779 kg Meter readings: A4 simplex: 173,028 A4 duplex: 58,200,255 A3 simplex: 11 A3 duplex: 3,424 SYSTEM CONFIGURATION - 4x Paper Input Modules - 8x Duo Paper Tray - 2x High Capacity Stacker - Remote Manager - PCL, IPDS, PostScript Lhodpfxsxtacvo Aaaep - Streaming & PrismaSync

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2010019101, clamping force: 1,750 kN, screw diameter: 32 mm, injection pressure: 1,611 bar, ejector force: 50,000 N, opening stroke: 450 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 1,750 kN Opening stroke: 450 mm Mould mounting area: 500 x 800 mm Minimum mould height: 500 mm Ejector force: 50 kN Ejector stroke: 150 mm Dry cycle time: 1.4 s / 357 mm Injection Unit Screw diameter: 32 mm Shot volume: 80.4 cm³ Shot weight (for PS): 77.2 g Injection force: 129 kN Injection pressure: 1,611 bar Injection rate: 201.1 cm³/s Plasticising capacity: 17 g/s L/D ratio: 20 Screw speed: 590 rpm Screw torque: 250 Nm Nozzle retraction force: 25/50 kN Nozzle stroke: 510 mm MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 5,462 x 1,931 x 2,042 mm Lsdpsxuqgbefx Aaaehp Net weight: 10,650 kg Heating Specifications Number of heating zones: 6 Heating capacity: 8.4 kW EQUIPMENT Control panel with keypad 32 mm screw Rotameter with electronic flow control 2 cores (moving platen) 1 core (fixed platen) 2-stage sequential air injection Heated channels: 32 pcs Euromap 67 interface 6 vacuum sensors

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 80709, plate height: 45 mm, empty load weight: 2,900 kg, operating speed: 333 mm/s, Equipment: CE marking, TECHNICAL DETAILS Maximum panel thickness: 45 mm Edge band thickness: 13-60 mm Maximum edge material thickness in rolls: 3 mm Minimum panel width: 50 mm Minimum panel length: 150 mm Lhedpfxoxuqufo Aaajp Working speed: 10 - 20 m/min MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,950 mm x 1,700 mm x 1,530 mm Weight: 2,900 kg EQUIPMENT Glue pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting edge trimming and chamfering unit RI 700 Compact edge scraper RBK501 Brushes SP700 Edge sanding unit LV 700 Heated infeed guide PLC control Panel support guide Large-diameter roll holder Edge cutting device for 3 mm thick rolled edges CE certification

Condition: not inspected (used), Year of construction: 2001, operating hours: 3,260 h, functionality: unexamined, machine/vehicle number: 730, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 685 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you are committing to collecting the item within the specified period: between 01.12.2025 and 05.12.2025. TECHNICAL DETAILS Travel distances X-axis travel: 1,350 mm Y-axis travel: 1,150 mm Z-axis travel (vertical): 685 mm Z-axis travel (horizontal): 870 mm Spindle Main spindle speed: 0 – 12,000 rpm Acceleration time: approx. 2.5 s Tool holder: HSK-A63 Tool Data Tool magazine: 46-position changer Number of magazine stations: 46 Max. tool diameter (full magazine): 80 mm Max. tool diameter (partial magazine): 130 mm Max. tool weight: 8 kg Max. tool length: 300 mm Max. magazine load: 200 kg Chip-to-chip time: 9–12 sec H/H Feeds and Rapid Traverses Rapid traverse X, Y, Z: 30 m/min Table NC rotary table diameter: 1,100 mm Clamping surface: Ø 1,100 x 1,000 mm Table load: 1,500 kg Centering bore: Ø 50H6 Table height above floor: approx. 1,120 mm Swivel axis (A-axis): +15° to -120° Control: HEIDENHAIN TNC 426 MACHINE DETAILS Spindle hours: 3,260 h Machine operating hours: 82,797 h Dimensions & Weight Machine weight: approx. 12,000 kg Space requirement (L x W x H): 4,130 x 3,680 x 3,150 mm EQUIPMENT Lhsdpfxexxzqro Aaasp RENISHAW OMP60 probe system Technical documentation Note: Transport is expected to be carried out by a truck with a loading width of 3,000 mm.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 40164, controller manufacturer: HAAS/FANUC, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS Spindle speed: 12,000 rpm MACHINE DETAILS Control: HAAS/FANUC Electrical data Voltage: 360/480 V Phases: 3 Frequency: 50/60 Hz Full load: 40 A Maximum load: 70 A EQUIPMENT 24-position tool changer BT40 Lhodjxuih Rspfx Aaasp Belt filter system / high-pressure pump KNOLL KF 150

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,029 h, functionality: fully functional, machine/vehicle number: 51561, clamping force: 2,300 kN, screw diameter: 135 mm, injection pressure: 1,600 bar, opening stroke: 3,800 mm, tool height: 1,890 mm, TECHNICAL DETAILS Clamping force: 2,300 kN Platen size (H x V): 2,900 x 2,500 mm Tie bar distance (H x V): 2,000 x 1,600 mm Minimum/maximum mould height: 700 mm/1,890 mm Maximum opening stroke: 3,800 mm Lhodpfsxuqc Nex Aaaop INJECTION UNIT Screw diameter: 135 mm Shot volume: 8,870 cm³ Shot weight (PS): 8,071 g Injection pressure: 1,600 bar MACHINE DETAILS Net weight (with control cabinet): 113 t + 18 t Operating hours: 70,029 h

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 560, working width: 1,200 mm, working height: 800 mm, workpiece height (max.): 100 mm, empty load weight: 1,700 kg, throughput speed: 166 mm/s, TECHNICAL DETAILS Working height (carousel): 800 mm Working width: 1,200 mm Max. workpiece height: 100 mm Feed speed: 0.3 - 10.0 m/min Spindles length: 6 x 100 x 350 mm Extraction: 2,500 m³/h Ljdpexuqr Dofx Aaaohp MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,500 x 4,000 x 2,210 mm Net weight: 1,700 kg Electrical Data Voltage: 3 x 400/500 V - 50/60 Hz Max./Min. fuse: 32 A Max. power consumption: 15 kW EQUIPMENT lock-itTM spindles

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1062021, controller manufacturer: HAAS/FANUC, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 40, TECHNICAL DETAILS Spindle speed max.: 10,000 rpm Lhedpfoxuidxsx Aaajp MACHINE DETAILS Tool changer: 40-fold Tool holder: BT40 Control: HAAS/FANUC

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,250 h, functionality: fully functional, machine/vehicle number: 51760, clamping force: 11,000 kN, screw diameter: 90 mm, injection pressure: 1,910 bar, tool height: 1,270 mm, TECHNICAL DETAILS Clamping force: 11,000 kN Platen size (H x V): 2,340 x 2,040 mm Tie bar spacing (H x V): 1,575 x 1,320 mm Min. tool height: 592 mm Max. tool height: 1,270 mm Max. opening stroke: 3,016 mm Lhjdpfexuqbrsx Aaaep Injection unit Screw diameter: 90 mm Shot volume: 2,480 cm³ Shot weight (PS): 2,256.8 g Injection pressure: 1,910 bar MACHINE DETAILS Net weight (including control cabinet): 62 + 11 t Operating hours: 70,250 h EQUIPMENT ENGEL ERC 84-1E robot

Condition: ready for operation (used), Year of construction: 1999, operating hours: 1,712 h, functionality: fully functional, machine/vehicle number: 09990138, overall weight: 935 kg, pressure (max.): 7.5 bar, rotational speed (max.): 3,500 rpm, Equipment: CE marking, TECHNICAL DETAILS Output: 7.95 m³/min Max. speed: 3,500 rpm Max. pressure: 7.5 bar MACHINE DETAILS Engine power: 45 kW Voltage: 400 V / 50 Hz Weight: 935 kg Operating hours Operating hours: 17,482 h Lhedexuqqtspfx Aaajp Operating hours at start-up: 9,242 h Air hours: 1,712 h Oil hours: 663 h Oil change: 663 h EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, opening stroke: 2,900 mm, tool height: 1,400 mm, TECHNICAL DETAILS Clamping force: 15,000 kN Platen dimensions (H x V): 2,150 x 1,880 mm Tie bar spacing (H x V): 1,500 x 1,250 mm Min. mold height: 700 mm Max. mold height: 1,400 mm Max. opening stroke: 2,900 mm Screw diameter: 145 mm Shot volume: 10,981 cm³ Shot weight (PS): 9,880 g Injection pressure: 1,454 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 14,400 x 3,400 x 2,900 mm Net weight (incl. control cabinet): 74,000 + 21,000 kg Electrical & hydraulic equipment Rated power of pump motor: 165 kW Heating capacity: 97 kW EQUIPMENT Lsdpfexup T Hex Aaashp Wittmann W 753 robot (year of manufacture: 2008) Safety enclosure Conveyor belt Service history notes: 2010: New screw with RSP and barrel 2015: New IBED 2015: New wiring panel 2017: New motor and 2nd pump 2017: New injection side cylinder piston BS with seals 2017: Replacement of oil cooler circulation pump 2017: Replacement of teach box (robot) 2018: Replacement of pumps P1 + P3 (at 65,800 operating hours) 2018: Replacement of hydraulic oil

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 092323, feed rate X-axis: 24 m/min, working width: 230 mm, spindle diameter: 40 mm, working height: 125 mm, number of spindles: 5, TECHNICAL DETAILS Working width: 230 mm Working height: 125 mm Spindle diameter: 40 mm Infeed table: 2,000 mm Feed speed: 24 m/min Feed motor power: 3 kW Minimum material length: 400 mm Spindles Number of spindles: 5 Lower horizontal spindle power: 7.5 kW Right spindle power: 5.5 kW Lhsdpfx Ajxuqm Usaaop Left spindle power: 5.5 kW Upper horizontal spindle power: 7.5 kW Second lower horizontal spindle power: 7.5 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 370 cm x 200 cm x 190 cm Weight: 3,500 kg Electrical Data Voltage: 380 V Frequency: 50 Hz Phases: 3 EQUIPMENT Continuously adjustable feed Electronic height adjustment Electronic adjustment of the left head Feed via cardan shafts Five upper steel rollers Two upper rubber feed rollers Roller in the table feed Pneumatic material pressure Chromium tables CE marking

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 120 mm, ejector stroke: 300 mm, opening stroke: 1,900 mm, TECHNICAL DETAILS Clamping force: 9,500 kN Opening force: 665 kN Tie bar distance: 1,400 x 1,150 mm Clamping plates: 1,960 x 1,710 mm Opening stroke: 1,900 mm Min. mould height: 500 mm Max. mould height: 1,200 mm Max. opening width: 2,400 mm Ejector stroke: 300 mm High-performance screw HPS-UN, diameter: 120 mm Lsdpfsxup Sijx Aaajhp Nozzle radius: 30 mm Nozzle opening: 12 mm Screw diameter: 120 mm Shot weight (HDPE): 5,420 g Shot volume: 7,634 cm³ Specific injection pressure: 2,257 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,770 x 3,420 x 2,750 mm Machine weight: 61.5 t

Condition: ready for operation (used), Year of construction: 2001, operating hours: 70,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 90 mm, clearance between the columns: 1,000 mm, injection pressure: 1,742 bar, opening stroke: 2,000 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Maximum mold opening force: 356 kN Feed force of the moving opening platen: 98 kN Force of the moving closing platen: 92 kN Platen size (H x W): 1,610 mm x 1,530 mm Tie bar spacing (H x W): 1,120 mm x 1,000 mm Ledpfexup Nnex Aaajhp Mold opening stroke: 1,400 mm Minimum mold height: 600 mm Maximum opening: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 10,500 x 2,860 x 2,890 mm Weight: 43,000 kg Operating hours: 70,000 h