Used Construction Site for sale (24,287)

Condition: used, Year of construction: 2026, Avola construction site circular saw ZBV 500-S. Complete with operating manual, adjustable cutting height, and bevel adjustment 90°-45°. Electrical connection for three-phase current 400 V, 50 Hz. Device plug CEE 32, with phase inverter. Circular saw blade, carbide-tipped, sound-dampened, 500 mm diameter. With safety guard and table extension. Parallel fence with 2 support edges. 4 lifting eyes. Cutting height 0-170 mm, weight 175 kg. Motor power P1/P2: 6.4/5.0 kW. Therefore, ready for use in all respects. Prodpfe Af Nnlsx Airjc Storage location: Available for delivery.

Condition: excellent (used), Year of construction: 2016, Construction compressor Prjdpfowubzrsx Airec Manufacturer: Atlas Copco Model: XAVS 186 Year of manufacture: 2016 Operating hours: approx. 657 h - Delivery pressure: max. 14 bar - Flow rate: max. 11.4 m³/h - Power: 104 kW - Engine: John Deere 4045HAC05 - Aftercooler - Water separator - Weight: approx. 2.45 t

Condition: new, functionality: fully functional, machine/vehicle number: HBWW1140, color: yellow, Year of construction: 2026, fuel type: gasoline, operation weight: 1,626 kg, Bowser Washer mobile pressure washer The improved Bowser Washer mobile pressure washer from the British company FuelProof is EU/RDW approved and equipped with a highly manufactured 1140-liter polyethylene tank, which is mounted on a robust galvanized chassis. Mounted on the chassis are the tank and the high-pressure unit with hose reel with standard 20-meter hose. These are protected by a tubular frame. Furthermore, this pressure washer is equipped with a Honda GX390, 11.7 hp gasoline engine with electric start. The pressure washer gives 15 ltr/min, 200 bar. This machine is expandable into a special sewer unit, making it easier to clean and flush sewers. In short, a versatile unit with an extensive pallet of applications and possibilities! Prodpjvf Ibusfx Airsc

Condition: used, Mitre Cold Circular Saw WMW (VEB GDR) Serial No. 189886 Year of manufacture: 1989 Saw blade diameter max. 300 mm Cutting range at 90° round approx. Ø 75 mm Square approx. 70 x 70 mm Cutting range at 45° round approx. Ø 55 mm Square approx. 50 x 50 mm Vice clamping width 100 mm Saw blade speed 31.5 rpm Prsdpfx Aey Ra D Djiroc Motor power 0.37 kW Connection 230 Volt, 50 Hz - Mitre adjustment up to 45° - Material vice - Mounted saw blade Ø 275 mm Dimensions (L x W x H) 600 x 600 x 700 mm Weight 47 kg Good condition

Condition: used, functionality: fully functional, Year of construction: 2007, The Soilmec SR-40 is a compact, highly versatile hydraulic rotary piling rig built on a Caterpillar base carrier, designed specifically for deep foundation works, urban construction, and restricted job sites Predpfx Aioz H Ud Esrec

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment. Special drilling machine for staircase construction, window construction, and universal applications due to pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily realized thanks to the rotatable drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Predsyfta Tjpfx Airsc Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching is then done pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be placed on the table at the front and rear 2 swivel workpiece supports 2 side stops, also usable as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swivel elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, Roll-off container, roll-off compaction container, compaction container, closed roll-off container with large rear door. Also ideal as a construction site container. Easy to convert into a drying container. Manufacturer: AJK, Ludden + Mennekes, Type PC 4500 Serial No. 3098-3, Year of manufacture 1993 Capacity: 20 m³ Unladen weight: 3200 kg Permissible total weight: 12,000 kg Internal length: 450 cm Internal width: 225 cm Internal height: 220 cm - with large rear door - very robust design made of thick material - former compaction container External length: 490 cm External width: 250 cm External height: 250 cm Good condition Several different roll-off containers available. Prsdpfx Ajz Ntbcsiroc Price quoted is for the illustrated and described roll-off container.

Condition: ready for operation (used), Year of construction: 2023, A mobile diesel screw compressor unit CompAir, suitable for construction site use, is available. Volume flow: 20m³/min, max. operating pressure: 24bar, motor power: 224kW, engine: Cummins QSB6.7, chassis: height-adjustable, fuel tank capacity: 350l. Machine dimensions: approx. 5500mm/2000mm/2700mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Pjdsxu I Ddopfx Airsrc

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: Predpfx Aoq N Ud Isirec - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 43,686 h, total height: 2,300 mm, overall weight: 7,000 kg, table width: 500 mm, table length: 870 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D Powerline, number of axes: 3, This 3-axis DMG Sauer Lasertec80 FineCutting was manufactured in 2006. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 700 mm. The machine is equipped with a Siemens SINUMERIK 840D Powerline control and a high-precision cross table with linear drives. If you are looking to get high-quality laser fine cutting capabilities, consider the DMG Sauer Lasertec80 FineCutting machine we have for sale. Contact us for further details. Technical Data • Machine Type: Laser Fine Cutting, Laser Drilling and Laser Welding Machine • Control: Siemens SINUMERIK 840D Powerline • Table Type: Cross Table with Linear Drives • Maximum Sheet Size: 870 × 500 mm • Vertical Axis with Linear Guideways and Ball Screw Drive • Machine Base: Mineral Cast Construction Pedpezl T R Dofx Airsrc • Laser Type: Lasag KLS246 Nd:YAG Laser • Average Laser Power: 100 W • Focal Length: 70 mm • Machine Dimensions (L × W × H): 6,000 × 5,000 × 2,300 mm • Machine Length: 6,000 mm (including aggregates, operation and maintenance space) • Machine Width: 5,000 mm (including aggregates, operation and maintenance space) • Operating Hours: 43,686 h • Laser Unit Condition: C Module Defect Additional Equipment • Precitec Processing Head • Automatic Height Control • Keller Dust Extraction System • Automatic Filter Cleaning System • KKT Kraus Water-Air Cooling Unit • Programmable Process Gas Pressure • Completely Overhauled Laser Cavity • New Pulse Lamp • Precitec Laser Head Mounting Tools Machine Benefits • Suitable for Laser Fine Cutting, Laser Drilling and Laser Welding • High-Precision Cross Table with Linear Drives • Automatic Height Control for Precise Processing • Comprehensive Maintenance Logbook Available • All Repairs and Component Replacements Documented • Inspection on Site Possible • Repair of the Laser Unit PossibleRepair will only be carried out if requested. Please note that the selling price may vary accordingly.

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Prsdpfx Aexlngasiroc Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display Predpfx Ais Afznuorsc The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Condition: new, Year of construction: 2025, Construction staircase, suitable for use on any construction site. 2 units available in stock. Can be assembled by one person in 15 minutes. Two staircases can be mounted on top of each other. Predpfx Aiszhhl Isrsc Half-turn staircase, left + right. A complete staircase can be stored on a Euro pallet.

Year of construction: 2020, condition: new, Selling price: € 1.000, US$ 1.059 Predpfx Aion Tm U Ejrsc Bucket volume: 2 m^3 Galen Group Heavy-Duty series of excavator buckets combines innovative design and advanced materials for the ultimate in job site productivity. Use the GALEN Buckets to tackle tough digging and material handling conditions with solid results. *Bucket shape designed to improve the penetration. *Strategic placement of HARDOX450 wear material in the cutting edge, side cutter and bottom corner to reduce wear *Dual taper design provides enhanced heel clearance for less resistance and wear during digging *Improved construction reduces weight up to .10% for larger payloads. Moreover, it decreases fuel consumption. *We use our own production Ground Engaging Tools which name is Metalon. We use Hardox as a scrap. We get better performance in comparison with the local market.

Year of construction: 2021, condition: new, Layout: Shears Attachment suited for: Construction machines Psdeph Rm Dspfx Airsrc Hydraulic crusher for the primary demolition phases equipped with power booster multiplier valve. Shear weights: from 1800 to 3100 kg Excavator weights: from 15 to 40 tons Jaw openings: from 850 to 1250 mm 360° rotation: YES *On site, reducing the opening/closing cycle of the jaws translates into time gained and a substantial increase in productivity. *Synchronized linkage system allows simultaneous opening/closing of the jaws *Heavy duty cylinders and protectors *High penetration jaws profile *Hardox 550/ 600 reversible blades We can manufacture high quality demolition shears with competitive prices. For detailed information, please contact us

Year of construction: 2023, condition: new, Field of application: Construction 1. Trapeze Bucket (or Trenching Bucket): Purpose: As the name suggests, a trapeze bucket is primarily used for digging trenches. These trenches are often required for laying utilities such as water, gas, or electrical lines. Design: A trapeze bucket is typically narrower than standard digging buckets, and it may have a trapezoidal shape to create trenches of a specific width and depth. Advantages: Precision: Designed for accurate and clean trenching, reducing the need for manual labor to finalize the trench. Efficient: Enables faster excavation, especially for straight-lined trenches. Versatile: Some are designed with replaceable teeth or edges, making them suitable for various ground conditions. 2. Ditch Cleaning Bucket (or Grading Bucket): Pedpfxon Tm Ngo Airjrc Purpose: This bucket is used for leveling, grading, cleaning ditches, removing debris, and back-filling trenches. Design: Typically broader and flatter than standard digging buckets, a ditch cleaning bucket might also have a smooth edge to ensure a clean finish. Advantages: Wide Reach: Its broader design means it can cover larger areas in one sweep, making grading and leveling tasks quicker. Smooth Finishing: The flat base allows for a smoother finish on surfaces, which is especially important when preparing for foundations or paving. Versatility: Excellent for landscaping projects, creating drainage slopes, or even spreading materials evenly across a site. Conclusion: The right bucket can make all the difference in a mini excavator's efficiency and the quality of its work. By understanding the specific functions and advantages of the trapeze bucket and ditch cleaning bucket, operators can ensure that they are using the right tool for the job, optimizing productivity and outcomes.

Year of construction: 2023, condition: new, Attachment suited for: Construction machines The rotary screen bucket is a versatile attachment for excavators, designed to effectively segregate and sort various types of materials on-site. Its rotating screening drum facilitates the separation of larger particles from fine materials, providing an efficient solution for waste handling, recycling, and construction applications. We can produce for every brand-models. For detailed information and quote, please contact us Predpspa Rt Hsfx Airec The machine model on the photos is Hitachi ZX225

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Sandwich panel construction Equipment: - Sink - Electric heater - Refrigerator Net: €9,151.26 / Gross: €10,890.00 Article number: BBC113372123.01 Technical data: • Brand: Blyss • Model: Comfort • Vehicle type: Site trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 370 x 210 x 230 cm • External dimensions (L x W x H): 542 x 222 x 290 cm • Permissible total weight: 1,300 kg • Unladen weight: 830 kg • Payload: 470 kg • Chassis: High loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Welded frame, hot-dip galvanized • V-drawbar • Chassis ALKO • Braked rubber spring axle • Ball coupling • Support wheel • Electrical system - 13-pin 12V connector • Downpipe supports with bracket - 4 pcs • Multiplex wood floor • Walls - 25mm sandwich panel, smooth laminate, RAL9016 color • Ventilation grilles - 2 pcs • Entrance door in the front wall • Entry step made of tread plate • Window in the rear wall with shutters • Socket • Switch box • 230V electrical installation • Double sockets - 3 pcs • Ceiling light - 1 pc • Table and benches for 4 people • Shelf above the window • Built-in refrigerator • Sanitary module (1.5-chamber stainless steel sink, faucet, 5 l boiler, 2 x 19 l canisters for clean and dirty water, soap dispenser, paper towel dispenser) • Clothes rail - 4 hooks • Curtain rod with fireproof curtain • Electric heater 2000W • Towing handles - 2 pcs _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT Predpfozy Dfzox Airec - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: new, overall weight: 1,300 kg, empty load weight: 1,140 kg, maximum load weight: 160 kg, loading space length: 4,130 mm, loading space width: 2,170 mm, loading space height: 2,120 mm, tire size: 165R13C, Car trailer as a construction trailer for 8 people with toilet and storage room. The insulated recreation trailer is suitable for all seasons thanks to its sandwich construction with 50 mm and 60 mm insulated floor. A heater provides support in very cold weather. The use of a crew trailer is possible on almost any construction site. As a normal car trailer, it can be driven to the construction site by a simple car. These vehicles are also operated as Burö trailers. Our mobile construction trailers have the following as standard an entrance door with personal lock lockable, toilet room with chemical toilet and sink, storage room with shelf, stairs and holder on the door, 50mm Snadwich structure outside silver inside white, iso floor in 60mm, PVC aud floor, refrigerator, coffee machine, connection cable, 230V fuse box with FI, sockets, switch and interior light, table and chairs, shelf, window with safety cover, coat hooks, sturdy crank supports, 230V power socket, sturdy frame and galvanized V-drawbar. Further technical details can be found below. Prodpfxorx Sn Ts Airsc Accessories for construction trailers include a toilet with drainage via a sewer, other sizes for up to 16 people, 100 km/h shock absorbers and an anti-theft device.

Condition: used, overall weight: 40,000 kg, No. 3282 Float and laminated glass cutting line Lisec ESL-60/30RS / VB-33 Used, year of construction 2009 / 2016, line still in operation, expected to be available from 15.02.2027 According to our customer / the previous owner, the line is fully functional and can be inspected on site Scope of delivery Only the areas framed in yellow in the layout Laminated glass cutting items 1 - 8, float glass cutting items 9 - 22 Item numbers as marked on the photos Key technical data Designed for jumbo size 6000 x 3210 mm Float glass cutting up to max. 33 kg/m2 glass weight, corresponds to approx. 13 mm glass thickness Laminated glass cutting up to max. 43 kg/m2 glass weight, corresponds to approx. 17 mm glass thickness 2 laminated glass cutting bridges Lisec VB-33 for higher output Automatic cutting table with grinding unit for edge deletion (Low-E) Automatic breaking in X and Y direction Conveyor sections up to max. 50 kg/m2 Power supply 3/N/PE 400 V / 50 Hz, control voltage 24 V Compressed air 6 - 8 bar Total of the stated connected loads approx. 210 kVA Laminated glass cutting Item 1: Laminated glass cutting machine Lisec PTV-60/30RE, year of construction 2009, approx. 5640 kg Pedpfx Aie Af Aqwerorc Item 2: Assembly Lisec VZ Line 2 Item 3: Air cushion table Lisec LKT-45/45TS, year of construction 2009, 61.28 kVA, approx. 3200 kg Item 4: Laminated glass cutting bridge Lisec VB-33, year of construction 2009, 17.00 kVA, approx. 2200 kg Item 5: Film overhang removal Lisec FASV-33, year of construction 2016, 0.83 kVA Item 6: Laminated glass cutting bridge Lisec VB-33, year of construction 2016, max. 43 kg/m2, 18.83 kVA, approx. 2200 kg Item 7: Stop and positioning station Lisec AL-32/33N, year of construction 2016, 25.88 kVA, approx. 1830 kg Item 8: Belt conveyor section Lisec BTA-20/26, year of construction 2016, max. 50 kg/m2, 6.08 kVA, approx. 1020 kg Float glass cutting Item 9: Belt conveyor section Lisec BTA-20/26, year of construction 2016, 6.08 kVA, approx. 1020 kg Item 10: Belt conveyor section Lisec BTA-40/26 Item 11: Belt conveyor section Lisec BTA-20/26, year of construction 2016, 9.05 kVA, approx. 1020 kg Item 12: Manual breaking table Lisec BTS-37/33, year of construction 2016, 15.75 kVA, approx. 1543 kg Item 13: Air cushion table Lisec LKT-10/33, year of construction 2016, max. 33 kg/m2, 4.50 kVA, approx. 250 kg Item 14: Belt conveyor section Lisec BTA-40/26, year of construction 2009, max. 50 kg/m2, 2.30 kVA, approx. 1154 kg Item 15: Breaking unit Lisec TBY-26/12, year of construction 2009, approx. 255 kg Item 16: Conveyor section Lisec RWF-33/25, year of construction 2009, 4.59 kVA, approx. 975 kg Item 17: Belt conveyor section Lisec BTA-30/33, year of construction 2009, 2.30 kVA, approx. 980 kg Item 18: Assembly Lisec RBA-25, year of construction 2009, 1.46 kVA, approx. 820 kg Item 19: Breaking unit Lisec TBX-33/12, year of construction 2009, approx. 290 kg Item 20: Belt conveyor section Lisec BTA-60/33, year of construction 2009, 18.22 kVA, approx. 1560 kg Item 21: Automatic breaking station Lisec ARS-33, year of construction 2009, approx. 580 kg Item 22: Automatic cutting table Lisec ESL-60/30RS, year of construction 2009, max. 33 kg/m2, 14.90 kVA, approx. 6380 kg Total weight approx. 40000 kg Sale on behalf of customer, ex location near 97076 Würzburg, without dismantling, transport and assembly On-site inspection is possible and recommended Any warranty is excluded, sold as seen / as is

Condition: new, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: electric, color: silver, overall weight: 27,000 kg, empty load weight: 27,000 kg, operation weight: 36,000 kg, maximum load weight: 50,000 kg, tire size: 6*2, tire condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, machine/vehicle number: MYM-J57C90, Equipment: hydraulics, low noise, rubber tracks, Mobile Crusher: Smart C&D Waste Recycling Solution Turn Demolition Debris into Profit Construction and demolition waste accounts for 30-40% of global waste. Our mobile crushing solution processes C&D waste on-site, transforming costly debris into valuable recycled aggregates. Technical Specifications 900×1060 Mobile Jaw Crusher Crusher Unit: Jaw opening: 900mm × 1060mm Max feed size: 750mm Output size: 75-200mm (adjustable) Capacity: 80-180 TPH Power: 90-110 kW Vibrating Screen: 2-deck or 3-deck configuration Screen area: 3.6-4.8 m² Motor power: 15 kW Produces 3-4 aggregate sizes simultaneously Feeder: Belt width: 1000mm Variable speed: 0-25 m/min Power: 7.5 kW Hopper capacity: 5-8 m³ Overall: Dimensions: 12-14m (L) × 2.8-3.2m (W) × 3.8-4.2m (H) Weight: 38-45 tons Total power: 120-150 kW Fuel consumption: 25-35 L/hour (diesel option) What We Process ✓ Concrete (plain & reinforced) ✓ Asphalt pavement ✓ Bricks and masonry ✓ Tiles and ceramics ✓ Mixed demolition debris ✓ Road construction waste Complete Recycling Process 1. Feeding Large hopper (5-8 m³) receives mixed C&D waste up to 750mm 2. Primary Crushing 900×1060 jaw crusher reduces material to 75-200mm with 4-6:1 reduction ratio 3. Magnetic Separation Automatic removal of steel rebar (>95% recovery rate) 4. Screening Multi-deck screen produces multiple grades: 0-5mm (sand) 5-10mm 10-20mm 20-40mm 5. Dust Control Integrated water spray system (8-12 nozzles) achieves >90% dust suppression Key Features Mobility: Track-mounted: Self-propelled, 0.8-1.2 km/h Wheel-mounted: Highway transportable Setup time: 30-60 minutes 360° working radius Automation: PLC control system Pjdpjq Nf Tvjfx Airjrc Remote operation (50m range) Real-time monitoring Automatic overload protection Performance: Concrete: 120-150 TPH Asphalt: 100-130 TPH Mixed waste: 80-120 TPH Screening efficiency: >95% Output Products Recycled Aggregates: 0-5mm: Concrete, mortar (15-20% output) 5-10mm: Asphalt mix, drainage (20-25%) 10-20mm: Concrete, road base (25-30%) 20-40mm: Sub-base, backfill (25-30%) Applications Building demolition Highway reconstruction Bridge dismantling Airport runway recycling Disaster debris management Urban renewal projects Service Package Included: Factory testing Installation supervision Operator training (3-5 days) 12-month warranty Lifetime technical support Spare parts availability Get Started Transform C&D waste from cost to profit. Our 900×1060 mobile crusher delivers proven performance, exceptional ROI, and environmental sustainability. Contact us for: Detailed specifications Custom configurations Site assessment Equipment demonstration Competitive quotation Make waste work for you. Choose proven mobile crushing technology for sustainable C&D recycling.

Condition: new, Construction fence with Douglas fir wood panel – durable, robust, and easy to maintain. Robust construction fence with a hot-dip galvanized and hand-welded steel frame, combined with a Douglas fir wood panel. Thanks to the galvanized finish, the frame is highly resistant to rust and weather conditions, making it suitable for long-term outdoor use. The wood panel can be replaced separately, so if it is damaged, the entire fence does not need to be replaced. Prodj Aaxc Sspfx Airec 🔧 Specifications Welding: Hand-welded Panel dimensions: 2160 x 2000 mm Weight: approx. 37 kg Frame material: Hot-dip galvanized steel Vertical tube: Ø 40 mm Horizontal tube: Ø 28 mm Wall thickness: 1.5 mm Mesh size: 35 x 150 mm Horizontal wire thickness: 4.0 mm Vertical wire thickness: 3.0 mm U-profile: 40 x 42 x 40 mm Panel material: Douglas fir wood Douglas fir plank: 145 x 17 x 1090 mm ✅ Advantages Robust, hand-welded frame Hot-dip galvanized for rust and weather resistance Strong and high-quality construction Replaceable Douglas fir wood panels Suitable for long-term outdoor use Durable solution in case of damage Application Suitable for securely and attractively fencing off construction sites, areas, and other locations where both screening and durability are important.

Condition: new, Complete construction fence set – 30 construction fences including feet, clamps, and a combination pallet Complete set for quickly and practically fencing off construction sites, grounds, and event locations. The set consists of 30 construction fences with matching fence feet and connecting clamps and is delivered with a combination pallet for easy transport and storage. Suitable for professional use in construction, rental, events, and site security. 🔧 Specifications Number of construction fences: 30 pieces Construction fence feet: 30 pieces, 25 kg Fence clamps: 30 pieces, type 42-42 Transport: Includes 1 combination pallet Pjdpfe Aaw Rnjx Airorc Example construction fence – type Mona: Dimensions: 3.45 x 2.00 m Mesh width: 100 x 300 mm Diameter of uprights: 40.4 mm Diameter of rails: 27.0 mm Wire thickness, horizontal: 4.0 mm Wire thickness, vertical: 3.0 mm Weight: approx. 18.9 kg Finish: Hot-dip galvanized ✅ Advantages Complete set ready for immediate use Includes feet and connecting clamps Combination pallet for efficient transport and storage Suitable for construction sites and events Robust galvanized design Ideal for rental or expanding existing inventory Application Suitable for temporarily fencing off and securing construction sites, event grounds, and other locations where a flexible and quickly deployable barrier is needed.

Condition: new, Complete construction fence set – 31 construction fences with a horizontal pallet Complete set with 31 construction fences and a horizontal construction fence pallet for easy transport and storage. Suitable for professional use on construction sites, event venues, and other locations where temporary fencing is required. Ideal for rental, project use, or supplementing your own stock. 🔧 Specifications Number of construction fences: 31 Type of construction fence: Mona, with a vertical center tube Transport: Includes 1 horizontal construction fence pallet Dimensions of construction fence: Width x height: 3.45 x 2.00 m Mesh size: 100 x 300 mm Diameter of uprights: 40.4 mm Prode Aaw R Ijpfx Airjc Diameter of crossbars: 27.0 mm Wire thickness, horizontal: 4.0 mm Wire thickness, vertical: 3.0 mm Weight: approx. 18.9 kg Finish: Hot-dip galvanized ✅ Advantages Complete set ready for immediate use Includes horizontal construction fence pallet Efficient to transport and store Robust, hot-dip galvanized construction Suitable for construction sites and events Ideal for rental and professional use Application Suitable for the temporary fencing and securing of construction sites, event venues, and other locations where flexible partitioning is required.

Condition: new, functionality: fully functional, fuel type: diesel, Year of construction: 2025, Equipment: new trailer mounted 190cfm diesel engine rotary twin screw air compressor Make/model: MCWEL MC190S-I Free Ris Delivery : 190cfm Working Pressure :100psi Engine make/model: Isuzu 4JB1ZY-01 Pedpfx Aex Izktsirorc Rate output: 50kW , 2500rpm