Used Fins for sale (178)

Condition: excellent (used), Year of construction: 2007, Used, draw through water/glycol cooler, brand Alfa-Laval type INR W S 6777D/Y. YOM: 2007, SN: 2190988. Codpfx Absucnzwozehd Max DN = 57 mm; Vn = 3҇230/400V, fluid group 2, coil TS 110/-40°C, F = 50 Hz, PT = 10 bar, PS = 9 bar, own weight: 604 kg. This, in very good condition draw through water/glycol cooler is equipped with: 2 pieces Ziehl Abegg ventilators 07078866, FC063-4DS6KV7, each Ø500, 1,19 kW, 1360/1000RPM; COSY 085, surface more than 90 m2, aluminium casing/aluminium fins Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol basis. Sales price: 2.960 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Two independently operated heavy-duty transport vehicles (A and B) for loads up to 35 tonnes. The transporters are supported by four steerable heavy-duty caster wheels and two omnidirectional drive wheels (allowing movement in any desired direction). The drive wheels are pneumatically pressed against the ground to ensure optimal traction. Rotation of the two drive wheels activates various drive modes for the transporters. This design enables highly flexible maneuvering, permitting travel in longitudinal and transverse directions as well as rotation on the spot. Each transporter is equipped with an integrated 35-tonne lift table. The contact surfaces of the table feature cooling fins to dissipate heat emitted from the pallet during the transport of warm or hot materials. The lifting mechanism is powered by a central motor; power is transmitted via two gearboxes and axes traversing the frame, which in turn drive four shafts located at the corners of the vehicle. Depending on the cargo, custom fixtures can be manufactured to be mounted on the lift system. The entire system is covered with aluminum panels, each individually numbered to ensure correct repositioning after maintenance. The transporters were designed to carry a maximum load of 35 tonnes at a top speed of 1.5 km/h in manual mode and 1 km/h in semi-automatic mode. The speed is continuously adjustable via joystick-based manual control. Unladen, and in manual mode, the vehicles can reach speeds of up to 2.5 km/h. In semi-automatic mode, speed is limited to 1.5 km/h. Chodpfxjxa Ende Abzjd Control system: SIEMENS SIMATIC Operation: Radio remote control Drive: Battery powered Dimensions per vehicle: approx. 3,600 x 2,500 x 800 mm (Original purchase price approx. €1.2 million)

Condition: used, mileage: 1,300 km, power: 235 kW (319.51 HP), gearing type: automatic, fuel type: diesel, color: white, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2025, loading space length: 4,200 mm, loading space width: 2,450 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), New vehicle, 18-ton truck MAN TGM 18.320 BL with Meiller 3-way tipper, offering 8,560 kg payload and a new HMF 1320K5-RCS loader crane featuring hydraulic 5-stage extension up to 14.90 m, radio remote control, dual hydraulically extendable swing-out stabilizers, rotator and grab system (control circuits 5 + 6), EVS system, Meiller 3-way Trigenius tipper D212, 320 HP, automatic transmission, high-performance engine brake, EVBec, trailer coupling with pneumatic and hydraulic connections for tipper trailers, air conditioning, air-suspended rear axle, reversing camera, Plus driver’s seat package, central locking, and much more. Extended MAN manufacturer’s warranty from date of first registration for 24 months and up to 100,000 km. ATS warranty from date of first registration for 48 months and up to 240,000 km. Truck Equipment: - Mileage: 1,300 km - CC (short) cab with rear wall window - 3-seater - Drive: 4x2 - Unladen weight: 9,440 kg - Payload: 8,560 kg - Engine: Euro 6 E - Wheelbase: 3,875 mm - Meiller Trigenius D212, 4,200 x 2,450 mm, sidewalls 600 mm high - Front wall: 800 mm high - Tipper bed floor thickness: 4 mm - Load securing with floor and sidewall lashing rings - 600 mm side and rear wall height - Rear wall tipper pendulum-type and foldable - MAN PowerMatic 08.13 OD automatic transmission - MAN TipMatic gearstick control - MAN Idle Speed Driving transmission function - Rockinger AHK (type 400 G 150 A) with air brake connectors - Trailer load: 21,000 kg - Permitted gross train weight: 36,000 kg - Tipper hydraulics connections at rear for 3-way tipper trailer - Front axle leaf-sprung, rear axle air-sprung - Rear axle differential lock - Front axle: 7,500 kg, rear axle: 11,500 kg - Stabilizer on front and rear axle - Shock absorbers front/rear - HY axle ratio: i=5.29 - Full brake assistant - Emergency brake assistant (EBA) - Lane departure warning (LDW) - Turn assist - Driver attention warning (MAN AttentionGuard) - Tire pressure monitoring system (TMP) - Reversing motion system (rear-view camera) - Traffic sign recognition - Front Detection - EBS with ABS and ASR - Disc brakes on front and rear axles - ESP - MAN EVBec high-performance engine brake, adjustable - MAN EasyStart hill hold assist - Air conditioning - Cruise control - Sun visor - Central locking - 2 LED rotating beacons on cab roof - 2 work lights behind cab roof - Multifunction steering wheel - LED daytime running lights - Electrically adjustable and heated exterior mirrors - Electric windows - Plus driver seat package with air suspension, adjustable belt height, and seat heating - Comfort seat covers - MAN MediaSystem Advanced 7-inch - MAN Sound System - Smartphone integration - New vehicle without registration with 2-year MAN factory warranty Loader Crane Equipment: - New HMF 1320K5-RCS loader crane with hydraulic 5-stage extension - Manufacturer’s warranty until 09/2027 Chedpfjxpbrqjx Abzjd - HMF SC radio remote control with linear control levers - Rotator and grab system (5 + 6 control circuits) - Lifting capacity approx.: 4.50 m / 2,470 kg; 6.30 m / 1,630 kg; 8.40 m / 1,140 kg; 10.60 m / 860 kg; 12.80 m / 680 kg; 14.90 m / 580 kg (manufacturer specification) - Hydraulic reach: 14.90 meters - Crane extensions up to 17.30 meters possible - Dual outrigger with hydraulically extendable swing supports - Autoswitch for automatic mode change between EVS/CYL operation - Temperature monitoring - LED spotlight at the articulated boom with 3,040 lumens Price NET plus 19% VAT. Attractive fin

Condition: used, maximum load weight: 12,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2016, loading space length: 9,120 mm, loading space width: 2,480 mm, loading space height: 3,030 mm, loading space volume: 68 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: ABS, 2 axle H&W tandem trailer Tautliner FIN: H49132 Chassis / attachments: * Air suspension lifting + lowering * Tires: 435/50R22.5 * Remaining profile: approx. 50% * Spare tire holder * 2 x rear supports * 1 x front support * WAP drawbar coupled * Eyelet 50 mm Construction: * H&W Tautliner * Certificate EN 12642 Code XL * Daimler DL-RL 9.5 * Side curtains * Edscha roof * Lashing eyes * Multilock / perforated outer frame * Folding doors on the front * Through-loading ramps Dimensions: 9100 mm x 2480 mm x 3020 mm * approx. 68 m³ 22 pallets Weights: * Total weight: 18,500kg Codpfx Abjvtihlezjhd * Empty weight: 5,100kg * Payload: 13,400kg Other: * 1 previous owner New general inspections / safety inspections or weight reductions / increases are available on request. We are happy to help you obtain export / transfer license plates, and it is also possible to transfer your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and spelling errors, changes, prior sale and errors reserved!----Who are we? Leible commercial vehicles is a family business based in Kehl am Rhein. Thanks to our many years of experience in the areas of reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible commercial vehicles lies in the sales of new and used commercial vehicles. There are a wide range of vehicles on 11,000 square meters. Our company philosophy is characterized by fairness and seriousness. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them when buying or selling vehicles. See for yourself! Our service for you: Loading vehicles We are happy to help you load the vehicles you have purchased. Organizing special transports We are happy to help you organize special transports. Day numbers / export license plates We are happy to help you obtain export license plates / short-term license plates. Handling customs formalities We are happy to help you handle customs matters.

Year of construction: 2020, condition: reconditioned (used), functionality: fully functional, Mycket fin maskin. Enads använd 3 säsonger. En ägare Luftkyld Codpfexnm Uujx Abzshd 220 v

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 6381/99, 2 connected kilns, timber volume, each 142m3 , total = 284 m3 concidering: - 50x100 boards, stacking factor 0.85 - each kiln 24 stacks 4.2x1.2x1.2m + 12 stacks 5.1x1.2x1.2m ; 1m free space in front and 1m behind the stacks, 0.15m between the stacks - inside dimensions of each kiln: width 15.2m (3 stacks), depth 7.3m (4 stacks), height 4.1m (3 stacks) - dimensions of loading door 15.2x4.1m , lifting-sliding type of 2 pcs. Inspection doors in rear walls. - loading system frontal forklift , 2 sliding trolleys for the loading door of lifting-sliding type Heating power 610,000 Kcal/h at 60'C inside temperature. Heating system: hot water, 90'C at inlet min, bi-metal pipes, stainless steel core with external aluminium fin, including the automatic valve for the hot water with intercept valves and stainless steel pipes till rear wall of dryers Rehumidification: cold water 3.5 bar, 150l/h. The spraying device by stainless steel pipe and changeable nozzles on brass. Number of fans each kiln, installed in long aluminium pipes (Nardi patent): 12 , reversible, 800mm, changed power motors 4.0/1.1kw, two speeds. Long pipes increase the air flow, reducing the pressure drop, saving energy. The horizontal aluminium baffles closing the free space over the stacks Number of vents each kiln: 8+8 cast aluminium vents Snow load 120 kg/m2, wind speed 100 km/h The electric switchboard cabinet per each kiln. Voltage: 400V , 50Hz . Type of control: LEONARDO 3000 (renewed in 2007) Each kiln has 12 wood moisture probes, 2 kiln temperature probes and 2 kiln relative moisture probes, 3 digital read outs of these values. Dismantling will be done by buyer. Seller provide a forklift if needed. Cedpfx Abewynnijzjhd

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2514070/0200/2007/15128743/1, Used evaporator GEA KÜBA, typ CA.E.06-1X1F, serial no. 2514070/0200/2007/15128743/1 Year of manufacture 2007 Casing Self-supporting construction, fan sections individually partitioned. Ventilator extremely silent (E)• Casing and legs from galvanized sheet steel • Temperature- and UV-radiation resistant powder coating RAL 7032 pebble gray • Lifting hangers standard Heat exchanger Standard tube arrangement lengthwise, staggered, in special copper. • Tubing: Tubes: Ripple Fin, SF-Cu Fins: High performance aluminum fins with Al studs for increased heat transfer Fin spacing: 2,2 mm. • Multi-circuiting possible. • Fluid connections Brazed copper connection vertical (can be used with vertical and horizontal airflow). 3. Axial fans Compact unit without external pressure, corrosion proof and weather resistant: Motor with fans, Fan guard in accordance with DIN 31001/24167 and assembly brackets. • Fan blades ø 650 mm, balanced in two levels according to a VDI 2060 standard. • Motors, threephase current 400±10%V, 50 Hz, 2 speeds, ∆-Y-connections, Protection: ø 650, IP66 • variable speed control by reduction of voltage. • Proof to frequency changes (maximum fan pitch dU/dt=500V/µs; Standard protection of motor by thermocouples. • For outdoor installation and ambient motor temperatures of -30°C up to +60°C. CA. 05 – 06 • 400V±10%V-3 with speed reduction ∆-Y-change-over • Protection CA.06: IP66 • Range of application: –30°C to +60°C • 230V±10%V-1 on request Maximum permissible 60 starts per hour. Fan motors have to be operated for at least two hours per month. • Other motors will change performance and Sound Pressure Levels quoted. The standard fans are recommended for frequency converters with a: • clock frequency: < 16kHz • voltage speed increase : , dU/dt < 1000V • frequency: f < 60Hz For reduction of peak voltages, speed voltage increase and motor noise (at reduced speed) manufacturers of frequency converters recommend the use of sinus filters at the output, especially when using motor cables longer than 50 m. For shorter motor cables dU/dt motor reactors can be used for this purpose. If several motors are connected, the total of all cable lengths has to be considered. Taking electromagnetic compatibility guidelines into consideration, power chokes or input filters are to be used at the input side (and shielded cables having a proper ground connection are to be used) Cedpfoip Utaex Abzshd LxBxH: 141 х 115 х 114 cm; Colant R typ Very good condition Price Euro 1200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2023, condition: new, A hand-operated budget table grinding machine for the deburring, grinding and edge rounding of sheet metal parts. The ProGrinder is a manually operated deburring machine which is suitable for finishing sheet metal parts. With the ProGrinder you can deburr semi-automatically for an attractive price. With this machine, Q-Fin gives you the possibility to achieve high-quality edge rounding with little effort, simply remove burrs and even polish the surface to a high-gloss finish. Optionally, you can also mount an orbital head on the ProGrinder so you can apply a nondirectional finish to the product. New machine from 2023, can be delivered from stock. Ask us about the attractive price. Machine comes with 1 year warranty (excluding wear parts). Machine is located in Bergeijk, NL. Cedpjlbmm Eofx Abzshd Machine Power Supply: 230 V |50 Hz | 4 A | 1kW Maximum workpiece height: 120 mm Maximum workpiece width: 780 mm / Lengte onbeperkt Dimensions (LxWxH): 1435 x 1100 x 1510 mm

Condition: used, Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 Driven Sizing # 2 Pass N. 28 Driven Sizing # 3 NDT Prueftechnik Pass N. 29 Driven Sizing # 4 Pass N. 30 Driven Sizing # 5 STRAIGHTENING AND SQUARING SECTION Pass N. 31 Idle Turkshead #1 Roll holder plates NOT available Csdpfxoq Ul Rvs Abzohd Pass N. 32 Idle Turkshead #2 Roll holder plates NOT available Pass N. 33 Idle Turkshead #3 Roll holder plates NOT available Pass N. 34 Idle Turkshead #4 Roll holder plates NOT available Tables and tools for rolls change ABB Motors Costamasnaga Reducers Centralized lubrication system Hydraulic Power Unit Complete Mill Portion Automation with diagrams (OTO MILLS/Elletre 2013) Complete hydralic system Fume and Vapors exhaust system with extraction hoods (EUROFILTER) Complete Zinc exhaust system (DONALDSON)

Condition: used, mileage: 31,388 km, power: 160 kW (217.54 HP), first registration: 11/1992, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, Year of construction: 1992, Equipment: ABS, navigation system, M-Benz 1224 4x4 RW2 Equipment Vehicle FIN 5569873 Vehicle ID / Vehicle ID /1151324 ????? ????? ??? ????? ?? ????? Chodjvc Ntgepfx Abzjd Chassis / Attachments: Wheelbase: 3,600 mm * Leaf suspension * Tires: 10 R 22.5 * Tire tread remaining: Front ~90% Rear ~80% * 1x Diesel tank * Winch 60 m/13mm thick * Trailer hitch Cabin: 3-seater * 2x revolving beacons Bodywork: Metz RW2 * Kirsch Type: D20SE * Rotzler winch 60 m * Light mast 6 m * Power generator Engine / Transmission: 11,309 cc // 218hp/160kW * 5 speed * Differential lock * Power take-off Weights: Total weight: 12,000 kg * Empty weight: 8,500 kg * Payload: 3,500 kg Other: * German vehicle * Rescue saw (for metal and glass) New main inspections / safety inspections or weight downgrades/upgrades are possible on request. We are happy to help you obtain export/transfer license plates, and transferring your purchased vehicles within the Federal Republic is also possible. Contact us!----We speak the following languages: German, English, and Russian!----No liability for printing & typing errors, changes, prior sale, and mistakes excepted!----Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Through our many years of experience in the processing and distribution of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge’s particular strength lies in the sale of new and used commercial vehicles. On 11,000 sqm², there is a wide variety of vehicles. Our company philosophy is characterized by fairness and seriousness. Because customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who accompanies them when buying or selling vehicles. See for yourself! Our service for you: Loading of vehicles We are happy to help you load your purchased vehicles. Organizing special transports We are happy to assist you with organizing special transports. Temporary/export license plates We are happy to help you obtain export/temporary license plates. Handling customs formalities We are happy to help you with customs matters.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: W09107335FHR30396, empty load weight: 8,500 kg, maximum load weight: 26,500 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space volume: 90 m³, color: silver, Year of construction: 2015, Equipment: ABS, For sale is a walking floor moving floor trailer from Reisch with a radio remote-controlled hydraulic tarpaulin. The moving floor is also operated by radio remote control. The trailer has a lifting axle and all 3 axles are equipped with Alcoa aluminum rims. The floor is grain-tight and there is a sight glass in the side wall. A matching Scania tractor unit is available. Please see our other advertisements. Trailer equipment: Chsdpfxotwyxas Abzed - EZ: 10.12.2015 - HU 12/2023 - FIN: W09107335FHR30396 - 1st axle tires: 385/65 R22.5, tread depth: 5mm suspension: air - 2nd axle tires: 385/65 R22.5, tread depth: 4mm suspension: air - 3rd axle tires: 385/65 R22.5, tread depth: 4mm suspension: air - BPW axles - Alcoa aluminum rims - Disc brakes all around - Work lights at the rear - LED taillights - Hydraulic tarpaulin with radio remote control - Walking floor control with radio remote control - Sight glass in the side wall Trailer can be used immediately Offer subject to change, input errors, changes, errors and prior sale reserved. Financing available on request. We are also happy to organize customs clearance for you. Opening hours: Mon.-Fri. 8 a.m. to 2 p.m. Or by appointment. Invoice with VAT shown will be issued upon sale. Price is NET/ subject to negotiation Location of the vehicle: Im Gewerbepark 11 99441 Umpferstedt

Year of construction: 2018, operating hours: 35,000 h, condition: used, functionality: fully functional, Description of fully automated dryer Major overhauling made by mid 2025 • The housing of the dryer is welded steel construction. The internal floor is made of perfored sheet board. The dryer has an external casing (walls and ceiling) in sandwich panel. • The dryer is driven by hydraulic power pack. • The dryer is equipped with “Ziehl Abegg”, MAXvent axial fans. It's propeller blades are made out of light casted material. One of the most energy efficient product on the market. Hot air generator is equipped with two “Geo Coil’’ heat exchangers. (fully functional but has bent fins) • The control system is equipped with a touch display for operation and visualization of the Dryer. Remote control via PC possible. Incl. web server on the panel for the visualization of drying processes via Ethernet interface. • Working mode according to air exit temperature. The rotational speed of the fans automatically adjusted by the frequency converters so that a desired air temperature level is maintained. Includes pressure measuring devices and extension of control system. • Dryer’s heat carrier temperature approx. 85°C flow temperature and approx. 65°C return temperature. Heat carrier flow defined as 176m³/h • Drying air ventilators equipped with frequency converters • Moisture sensors at the outlet of the dryer: YES • Adjustable height of drying bed: YES • Enlarged fuel receiving bin: Yes General specifications • Infeed material: Wood chips • Size of material: G100 • Water content infeed material max. 45% Cedpfexc Eitjx Abzohd • Water content outfeed material 7-10% • Designed capacity outlet approx. 1.600 kg/h • Density (wet): 300 kg/m³ • Designed drying surface approx.: 97 m² • Designed climate conditions on site: Ambient temperature 0°C; relative humidity 70%, air pressure: 990 mbar • Noise pressure level, 75 dB, (1 m distance from air inlet port) Dryer fans, installed power: 74 kW Dryer hydraulic powerpack: 15 kW

Condition: reconditioned (used), Year of construction: 2022, Trane | RTAA270 | Water Cooling System | | Brand | TRANE | | Model | RTAA270 | | Cooling Capacity kW/h | 1000 kW/h | | Evaporator | Shell & Tube | | Condenser | AI Finned Cu Tube | | Compressor | Helical Screw | | Compressor Model | 2 x CHHB0100 - 1 x CHHB070 | | Control | Compatible Control Microprocessor | | Dimensions mm. | 2285x9800x2540 mm | | Weight | 9096 Kg | Product Information Chodpfx Aoiphmcjbzsd Trane is a rebuilt chiller, a Trane water-cooled chiller with two-stage three-screw compressors. This chiller is equipped with a Trane Tracer Compatible Control Microprocessor. The rebuilt chiller works with a guaranteed start-up, tested from A to Z, at the specified capacity of +7/12°C water temperature and +35°C ambient temperature. ABOUT OUR COMPANY ; We offer for sale the cooling products "Chiller" which we have obtained as a result of our production process. Our "Chiller" products, which are provided by leasing or by re-production, are tested for their performance characteristics (current, pressure and tightness) before being shipped. In addition, we provide the necessary electrical and water pipe installation project for the installation and operation of the products to the purchasing companies. We also provide our customers with a guarantee for any problems that may arise during the operation of our products on site. In this way, our customers are fully assured during the installation and operation process of their units. #Trane #RTAA270 #WaterCooling #Chiller #Screw #Compressor #Tracer #Compatible #Control #Microprocessor #Installation

Condition: as good as new (ex-display), Year of construction: 2024, working width: 200 mm, 2024 Deburring and finishing machine F200 XLDS with magnetic support. Suitable for deburring, rounding, deslagging and/or grinding of steel cut parts up to 200 mm wide. This is concerning a F200 XLDS 4-station machine. Type TS, with touch screen. Compared to the standard F200 XL, this machine is equipped with a deslagging roller for removing slag from plasma cut products. The F200 XL deburring machine is the finishing specialist for small workpieces. Suitable for flat ferrous/magentic sheet metal parts between 15 and 200 mm wide. Deburring, slag removal, grinding and edge rounding at high speed. This deburring machine has a deslagging roller ('deslagging hammer') as the first station. The second station is a grinding belt followed by two stationary disc brushes, one rotating clockwise (CW) and the other counterclockwise (CCW). Compared to other deburring machines, the F200 DS has a very high processing speed while being able to achieve more edge rounding. The machine comes standard with a freely adjustable speed for the conveyor belt and the grinding and/or brush head(s), making it possible to perform every conceivable operation and achieve every conceivable result. You determine the desired finish. Simple operation via the HMI touch screen on the front. The magnetic system ensures effective fixation of the products to be machined on the transport table, allowing even small workpieces (from 15 x 15 mm) to be machined safely, quickly and without problems. It is not for nothing that we at Q-Fin are convinced by a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput of this machine is 5 times higher than comparable machines. Take the test for yourself and make an appointment. Csdpjhnc E Asfx Abzjhd We can now offer you this F200 DS - MAG showroom machine built year 2023 possibly in combination with a WES3000 wet working extractor and associated pipe work. Only available until sold. Machine comes with 1 year warranty excl. wear parts. Delivery ex works Bergeijk. If wanted we can also offer the machine including transport, installation and training of your operators on site. The machine is on display in our showroom in Germany. This is the very last F200 XLDS -MAG machine! Please contact us and we will send you an attractive offer.

Condition: used, This listing is for the Gram Vio Compact 610 Refrigerator The unit is in full working condition and is ready for immediate use although sins of wear include scratches to sides The Gram Vio Compact 610 is a professional-grade refrigerator designed for laboratory and medical applications. It offers reliable temperature control and energy efficiency, making it suitable for storing temperature-sensitive materials. Chsdpfx Asxhf T Aobzsd Design & Features Exterior Finish: Available in white lacquered steel or stainless steel. Interior: ABS lining with stainless steel wall rails for mounting fittings. Cooling System: Equipped with a finned tube evaporator and forced air distribution for uniform cooling. Defrost System: Automatic smart defrost with re-evaporation of defrost water. Control Unit: Gram Control Unit with voltage-free contact, alarms, and offset function. Alarms: Acoustic and visual high/low temperature alarms and door alarm. Applications The Gram Vio Compact 610 is ideal for: Laboratories requiring precise temperature control. Medical facilities storing biological samples. Pharmaceutical companies handling temperature-sensitive products The unit is moved easily on its lockable heavy duty castors

Condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral -Heat exchanger: cooling coil with fins -Dimensions: see photos -Material: aluminum -Transport dimensions: Ø65 x 365 mm Chjdpfeikgd Hsx Abzjd -Weight: 0.5 kg

Year of construction: 1990, condition: excellent (used), Fermin Elola multisaw - SCM 350 - year of manufacture 1990 - Spanish production - introductory pulling roller with pneumatic pressure TECHNICAL PARAMETERS: - cutting width 300 mm - cutting height 150 mm - engine power 90 kW - disc diameter 250 - 450 mm - sleeve diameter 70 mm - spindle diameter 52 mm - 3000 rpm main spindle - feed speed continuously adjustable up to 35 m/min - a toothed roller that introduces the material with an automatic pneumatic pressure - five upper pressure rollers Chedpfxjir Etpj Abzod - electric height adjustment - maximum element width 600 mm - minimum element length 800 mm - the possibility of attaching a "fin" clamp - central pneumatic lubrication - spigot diameter 260 mm Machine dimensions 270x240x210 cm weight ~ 5000 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 18.8 kW (25.56 HP), RegloChill RC2E 20 warehouse no.: 503608 type / device: chiller manufacturer: RegloChill type: RC2E 20 year of construction: 2016 Chjdpfx Abow Nxw Eezjd - Ecological refrigerant R407C - High efficiency rotating Scroll motor compressor groups - Molecular sieves dehydrating filter - Liquid level sight glass - High efficiency copper tube aluminum finned condenser - Solenoid valve - Safety pressure switches for high and low gas pressure - Copper evaporator, with high efficiency water-gas exchange stainless steel plates connection power: 12 A cooling medium: R407C cooling capacity: 18,8 kW voltage: 400 V - 50 Hz

Condition: like new (used), Year of construction: 2015, operating hours: 13,000 h, machine/vehicle number: EWADC22C-XS003, cooling capacity: 2,000 kW (2,719.24 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 46 °C, ambient temperature (min.): 35 °C, TECHNICAL SPECIFICATIONS Brand: DAIKIN Model: EWADC22C-XS003 Cooling Performance Cooling Capacity: 1933 kW Cooling Capacity (Kcal/h): 1,720,000 Kcal/h Energy Efficiency Ratio (EER): 2.63 Seasonal Energy Efficiency Ratio (ESEER): 4.02 IPLV (Integrated Part Load Value): 4.47 Evaporator Type: Shell & Tube (Direct expansion) Max. Water Side Operating Pressure: 10 bar Water Volume: 850 liters Nominal Water Flow: 92.2 l/s Water Inlet/Outlet Temperature: 12.0°C / 7.0°C Connection Diameter: 273 mm Insulation Material: Closed cell Condenser Type: Aluminum finned, internally grooved copper tubes Fan Type: Propeller type, glass fiber reinforced resin Fan Diameter: 800 mm Number of Fans: 30 Fan Motor Power: 52.5 kW Fan Speed: 900 rpm Nominal Air Flow: 160,327 l/s Compressor Type: Asymmetric single screw, semi-hermetic Model: 3 x HSA2690524 Quantity: 3 Oil Charge: 75 liters Control Mode: Stepless modulation (25% – 100%) Start Method: Star-Delta (Y-Δ) Refrigerant Type: R-134a Charge Amount: 360 kg Number of Circuits: 3 Dimensions and Weight Width: 2,285 mm Length: 14,785 mm Height: 2,540 mm Unit Weight: 12,600 kg Operating Weight: 13,470 kg Electrical Specifications Voltage: 400V / 3 Phase / 50 Hz Voltage Tolerance: 10% Nominal Running Current: 1100 A Max Starting Current: 1486 A Max Current for Wire Sizing: 1608 A Control and Automation Cjdpfx Asuma Thsbzshd Control Panel: MicroTech III Remote Monitoring: Modbus RTU, BACnet/IP, LonWorks, TCP/IP Temperature Regulation Accuracy: 0.1 °C Advanced Protection: High/low pressure, oil pressure, motor temperature, freeze protection, phase monitoring Sound Level Sound Power: 104 dB(A) Sound Pressure: 81 dB(A) 1 meter distance

Year of construction: 2025, condition: new, By installing the heaters, we have gained the possibility to speed up the gluing process. After the press has been heated up, the wrapping process takes 5 to 15 minutes. depending on the thickness of the veneer and the glued element. The process is widely used in factories producing furniture, windows, doors and coffins. The flexible membrane enables the gluing of both flat elements, such as: furniture sides, frames and stiles, as well as shaped elements, e.g. panels, door strips and bent fronts. Heaters power 2x2.5 = 5 kW Vacuum pump power 0.75 kW Working voltage 400V Cedpfsgp I Upox Abzohd Number of phases 3 Operating voltage frequency 50 Hz Working vacuum - 0.8 ± 0.05 bar Working temperature 40-50 ± 5 ° С Maximum temperature 60 ± 5 ° С Length 3050 mm Width 1350 mm Height 1600 mm Protection degree IP2X Noise level ≤ 70 dB Weight 350-400 kg Vacuum pump capacity 25 m3 / h Working dimension 3000 x 1350 mm 700% stretch of the membrane Diaphragm thickness 2.7 mm (+/- 0.20 mm)

Year of construction: 2001, condition: excellent (used), Machine: (Soldering of impact cooling fins) Dimensions: 2500 mm x 3200 mm x 2900 mm Chsdpfjxckv Eex Abzsd Furnace type: E 210 / 1H 60x90x60 1 RD

Condition: used, Year of construction: 2016, operating hours: 19,808 h, Volvo L 110H wheel loader FIN: Vehicle ID / Vehicle ID / 0204825 ????? ????? ??? ????? ????? ????? * Own weight 20,700 t * Tires 23.5 R25 * Articulated steering * Transport length 6.48 m * Transport width 2.67 m * Transport height 3.38 m * Driving speed 40 km/h * Dumping height max. 4.03 m * Outside turning radius 12.89 m * Lifting capacity 150.6 kN * Bucket scale * Air conditioning * Rear view camera * Sliding window * Trailer coupling * Heated seat * Heated exterior mirrors * Air conditioning * Volvo D8J diesel engine with 191 kW * Pfreundt WK 50-XS scale Other: * German vehicle * Service history (invoices) available New general inspections / safety tests or weight reductions / increases are possible on request. We are happy to help you obtain export/transfer license plates, and we can also transfer your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and spelling errors, changes, prior sale and errors reserved!----Who are we? Leible commercial vehicles is a family business based in Kehl am Rhein. Thanks to our many years of experience in the areas of reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible commercial vehicles lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 square meters. Our corporate philosophy is characterized by fairness and seriousness. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. See for yourself! Chedpfevywg Aox Abzjd Our service for you: Loading vehicles We are happy to help you load the vehicles you have purchased. Organizing special transports We are happy to help you organize special transports. Day numbers / export license plates We are happy to help you obtain export license plates / short-term license plates. Completing customs formalities We are happy to help you complete customs matters.

Condition: refurbished (used), Year of construction: 2022, Technical Specifications Brand: TRANE Model: RTAD 125 Cooling Capacity kW/h: 430 kW/h Cooling Capacity Kcal/h: 370,000 Kcal/h Evaporator: Shell & Tube Condenser: Aluminum Fin Copper Tube Compressor: Trane Chsdpfx Abekw D Acszod Compressor Model: 2 x CHHP0M2TK Control Panel: Trane Adaptive Control Dimensions (mm): 2260 x 3600 x 2068 Weight (Kg): 4500

Condition: used, mileage: 5,87,502 km, power: 360 kW (489.46 HP), first registration: 07/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Scania R 490 LA4x2MNB FIN: 5515173 Chassis / Attachments: * Wheelbase: 3700 mm * Full / Air suspension * Tyres: Front 385/65 R22.5, Rear 315/80 R22.5 * Remaining tread: Front approx. 20%, Rear approx. 90% * 1 x aluminium tank 1000 L * 1 x AdBlue tank * Hydraulic tank * PTO (power take-off) * Combined hydraulic system (Kombi-Hydro) Cab: * CR 19 N * 1 x bunk * Refrigerator / storage box * Automatic climate control * Auxiliary heater * Radio CD * Aux, USB, BT * 2 x revolving warning beacons * Scania AEB = Emergency Braking Assistant * Scania ACC = Adaptive Cruise Control * Scania LDW = Lane Departure Warning Engine / Transmission: * 12,742 cc // 490 HP / 360 kW // EURO 6c * Scania retarder * Opticruise / Automatic with 2 pedals * Differential lock * PTO (power take-off) Weights: * Gross weight: 18,000 kg * Curb weight: 8,580 kg * Payload: 9,420 kg Other: * German vehicle * SP valid until 02/2026 * New general inspection (HU) available upon request Chjdpfx Ajv R N N Debzed ---- New general inspections / safety inspections or weight reductions/load increases possible upon request. We are happy to assist with obtaining export/temporary license plates. Delivery of purchased vehicles within Germany is also available. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to change, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in the refurbishment and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specialises in the sale of new and used commercial vehicles. On our 11,000 m² premises you will find a wide range of vehicles. Our corporate philosophy is characterised by fairness and reliability. Customer satisfaction is very important to us, so we offer our customers an excellent all-round service package and provide a competent contact person to support them in the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organisation of special transports We are happy to assist you in organising special transports. Temporary/export license plates We are happy to assist you with obtaining export/temporary license plates. Customs formalities We are happy to assist you with customs formalities.

Condition: used, Year of construction: 2015, Brand: Rhoss Model: TCAV Z810 Chedjin N Amopfx Abzod Cooling Capacity kW/h: 800 kW/h Cooling Capacity Kcal/h: 688,000 Kcal/h Evaporator: Shell & Tube Condenser: Al Finned Copper Tube Compressor: Refcomp Compressor Model: 134-S-160-L4 Controller: Carel Dimensions (mm): 2260 x 7680 x 2430 Weight (kg): 6490 kg