Used Fins for sale (491)

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg Bwsdpel Dw D Eefx Abcsh

Condition: excellent (used), For sale: 3 FINSCAN lines: 1x Finscan camera sorting line Boardmaster HD Year of manufacture: 2012 1x Finscan NOVA No need to turn the pieces and without infrared lights. Speed: 200 pcs/min Year of manufacture: 2014 Bjdsx Up Dbjpfx Abcewh 1x Finscan NOVA Camera sorting, speed 200–220 pcs/min. No need to turn the pieces and without infrared lights. Year of manufacture: 2018

Condition: used, Year of construction: 2016, Laser type: PowerLine F100 Technical data: Travel distances of linear axes X/Y/Z axis: 800 / 300 / 300 mm Max. workpiece weight: 30 kg Heating, Ventilation, Air Conditioning: Operating temperature: 25°C +/- 10°C Storage temperature: 5°C to +40°C Ambient conditions: non-condensing, non-corrosive, frost-free Air electrical section: 160 m³/h Pneumatic supply: Medium: filtered, oil-free compressed air Max. permissible operating pressure: 6 bar Temperature range: -10° to +60°C Laser safety class: Laser Class 1 according to EN (IEC) 60825-1:2007 Marking field size of the laser: 120 x 120 mm Operating and storage conditions: Floor load capacity: min. 500 kg/m² Clearance above: 2 m for ventilation Bwedpfx Asxqp Rdjbceh Transport height: min. 2 m Room height: min. 2.50 m Electricity: Input fuse (protection): 3 x 16 A Nominal voltage: 400 V (+/-10%); 3P; N; PE Nominal frequency: 50/60 Hz; neutral conductor loaded Power consumption: 4 kVA (at 50 Hz) Size and weight: Width1): 1.50 m plus swivel arm max. 0.8 m (width without monitor) Length1): 1.80 m plus swivel arm 0.5 m (length without monitor) Height standing workstation: 1.20 m Working height: 0.96 m (standing workstation) Required space and volume 2): Width: 3.00 m Length: 2.50 m Height: 2.20 m (standing workstation) Area: 7.50 m² Weight, approx.: 1500 kg 1) Width, length, and area of the laser processing machine may vary depending on the adjustment of the optional swivel arm. 2) The necessary space and volume do not include potential aisle space! The operator must define the safety distances around the machine in accordance with national occupational health and safety regulations. Operating and storage conditions: - No direct sunlight - Do not place near radiators - Avoid strong temperature fluctuations - Do not install in areas with high dust levels - Do not install in areas with high levels of oil, solvent, or cleaning agent vapors

Condition: used, Finscan Boardmaster - 12 cameras Led lamps Laser thickness measurement Latest generation control computer (installed in 2021) Bwodpfx Asxpgmgobcsh Scanner from 2014 Complete with conveyors

Condition: used, Year of construction: 2012, machine/vehicle number: 873833, input voltage: 380 V, input current: 25 A, input frequency: 60 Hz, Equipment: freezer, lighting, Freezer container. In good condition. Bwedevwkmqepfx Abcsh

Condition: used, functionality: fully functional, Year of construction: 1991, ROFIN SINAR 1700 SM Laser, year 1991 for sale! Power 850 W Cuts metal up to 5 mm. Complete set: machine, changeable table, conveyor for assembly of parts, all documentation, program for uploading files available. Bwsdperi Nb Rjfx Abcoh Condition: mechanically it is in good condition, all guides, rails, and chains have been maintained.

Year of construction: 2006, condition: good (used), FIN Glue spreader SC2R/1300 with 2 rollers The year 2006 manufacture: FIN s.r.l. Italy main technical specification: Width of working: 1300mm The maximum passage between roller: 120mm The diameter of rollers: 185mm Advancement speed: 19m/min Net weight 390 Kg Overall dimensions: 64 x 210 x 136cm Bodpfx Abefguntocowh Overall dimensions with case: 73 x 200 x 153cm 400 V, 50 Hz, 037 kW Accurate and uniform spreading with any type of glue, excellent technical characteristics, added to the high practicalness, functionality and safety for the operator, place it at the forefront among the 2 roller glue spreaders. Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are built with a rational layer of rubber it is, therefore, possible to carry out 6-7 grindings. It is easy and quick to disassemble. Spreading, precise and uniform on one or both sides of the panels. Special shock-absorbers, on the roller supports, allow the rollers an automatic opening depth, so as to spread panels of different thickness within 5 mm. they also compensate for eventual parallelism differences of the panel. Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction to allow cleaning. Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy cleaning. Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal protection prevents the introduction between the rollers of any object more than 5 mm. thick over the transit established, ensuring the maximum safety for the operator. Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer protection. Control panel, with starting button, stopping button and warning light (24 V). Rollers rotation chain with self-registrable turnbuckle pinion. Roller washing with a bored washing tube, for the water intake during this operation.

Year of construction: 2000, condition: ready for operation (used), Operational hours counter heating: 23,002h, with controls cabinet and documentation. Bedpfx Aonl Emmsbcowh

Condition: excellent (used), Finscan Nova and a CGV full trimmer Bjdpfx Abswq A Edjcswh

Condition: like new (used), DELFIN INDUSTRIAL VACUUM CLEANER INDUSTRIAL VACUUM 400V EXCELLENT CONDITION SCOPE OF DELIVERY = AS SHOWN IN PICTURES (Approx. 1/4 - 1/5 of the price of a new unit – TOP OFFER) 4 units available Delfin ESD.DX.0036 Industrial Vacuum Cleaner – Excellent condition, ideal for industrial applications Manufacturer: Delfin Model: ESD.DX.0036 Condition: Very good, with only minor signs of use Functionality: 100% operational Features: ✅ ESD protection: Specifically designed for use in electrostatically sensitive areas – ideal for cleaning electronic components and delicate equipment ✅ High suction power: Efficient cleaning with a high-performance motor and excellent suction capacity Bedpswd D R Ujfx Abcjwh ✅ Robust and durable: The Delfin ESD.DX.0036 is built for continuous operation in industrial environments and workshops ✅ Versatile: Ideal for dust extraction, cleaning machines, production areas, and construction sites ✅ Easy to operate: Simple handling with ergonomic handles and a user-friendly control panel ✅ Low energy consumption: Powerful yet energy-efficient and environmentally friendly Technical details: Easy maintenance: The Delfin ESD.DX.0036 is easy to maintain and spare parts are readily available Robust construction: Optimized for industrial use, with exceptionally durable materials capable of withstanding extreme conditions Industrial businesses Cleaning laboratories and production facilities ⚡ Use in ESD-protected areas ️ Workshops, machine cleaning Cleaning electronics and sensitive devices Why choose this vacuum? The Delfin ESD.DX.0036 is the ideal choice for companies seeking a reliable, high-performance, and energy-efficient industrial vacuum cleaner. With ESD protection and powerful suction.

Condition: good (used), Year of construction: 2016, total height: 2,640 mm, total length: 3,300 mm, total width: 3,960 mm, volume flow: 8 m³/h, Equipment: cabin, Technical Details: 75 m³ area including paint booth, drying booth, and paint storage room. Paint booth: - Internal dimensions: 3300 x 3960 x 2640 mm - Floor area: 13.1 m² - Internal volume: 34.5 m³ Bodpfoyhbggjx Abcswh - Heating method: air intake from the air-conditioned area - Air supply: 8,000 m³/h Drying booth: - Internal dimensions: 3300 x 3960 x 2640 mm - Floor area: 13.1 m² - Internal volume: 34.5 m³ - Heating method: electric heating cartridges, 22 kW, 3x400V - Air supply: 2,500 m³/h Paint storage room: - Internal dimensions: 3100 x 2000 x 2600 mm - Heating method: air intake from the air-conditioned area - Floor area: 6.2 m²

Condition: new, Year of construction: 2025, * 60 lt Capacity Bodpfxjh Nnbcs Abcowh * 2,2 kW High performance three phase current drive motor. * Adjustable speed control up to 200 rpm. * Control panel and dosing pump included. - The dosage pump automaticly puts the chemical to the bowl * Working hours timer * PU or INOX plate * Changeable valve for the wastewater decharging. * Inner bowl has canals and gaps for ensuring non stick wall.

Condition: new, Year of construction: 2026, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations Bedpfsvv Rfksx Abcewh

Condition: new, Year of construction: 2025, DESIGN VFDK powder booths are designed as an open wall cartridge filtered for manual powder coating use from one side. Powder booths are manufactured of externally powder coated sheet metal structure with castor wheels at the ground. The system consists of filtration system with automatic cleaning, ventilation and electrical control panel. Long lasting 100% polyester cartridge filters are used for high efficiency. WORKING PRINCIPLE Air flow generated by the extraction fan carries overspray powder coating particles to the filter unit and collects them at the outer surface of the filters. Filters are cleaned by pulse valve operated pull-reverse system during the operation. Powder coatings accumulated by this way at the ground of powder booth are collected manually in the drawer and can be reused after sieving. A hopper with vibrated sieve can be added optionally for powder recycling. ADVANTAGES Saves space in the workshop Easy and fast cleaning Made in Türkiye CE Mark Bjdpfx Abjvv H Hdscewh We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: excellent (used), Robust industrial machine made in Germany: Walther Trowal, model DLT 4, year 1980. The device is intended for surface finishing of metal, aluminum, or plastic parts – trowalizing process (deburring, edge rounding, polishing, cleaning). Classic drum-type construction – reliable, heavy-duty, and durable, typical for “West Germany” manufacture. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Drum speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Complete machine, drum rotates smoothly and evenly. • Perforation and internal lining in good condition. • No visible cracks or structural damage. • Requires electrical connection and possibly a basic inspection. • Ideal for tool shops, machining plants, or production lines. Application: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Finishing screws, bushings, stamped parts, castings, and precision components. Condition: used, robust, classic Walther Trowal construction – ready for light refurbishment or immediate operation. Bedpfxjxmlinj Abcewh

Condition: excellent (used), For sale: Professional turning and finishing holder with SK40 mounting, ideal for facing, finishing, and rough machining of end and flat surfaces. The high-quality tool steel construction ensures stability, rigidity, and high clamping precision. Bwjdpfx Aboxizb Ejcjh 📌 Technical data: • Type: Turning and finishing holder with insert • Mounting: SK40 DIN 69871 B • Dimensions: SK40 × 40 × 40 • Head diameter: Ø40 mm • Total length: approx. 60 mm • Condition: Used, very good technical condition – fully functional ✅ Advantages: • High machining accuracy and clamping rigidity • Suitable for use with indexable inserts • Designed for facing, finishing, and rough machining • Compatible with milling machines and machining centers with SK40 mounting

Condition: used, Year of construction: 2004, Infeed length: 150–700 mm Final length: max. 6,100 mm Moulder: 2 packages/min Press: 2 cycles/min Compact semi-automatic finger jointing line consisting of: Bwodpfxow Nbaco Abceh - Moulder PJ 150/500 - Transfer table for manual handling - Single-channel press PJ 7/6100 li

Condition: used, Throat depth: 420 mm Feed rate: approx. 6 m/min Bwsdpfx Ajwrfbdjbcjh Kuper veneer splicing machine, type FW/Mini, for precise gluing and joining of veneer sheets with glue thread. Ideal for smaller workshops or flexible use in the production of high-quality veneered surfaces. Includes batch of glue threads.

Condition: good (used), Year of construction: 1998, Machine weight approx. 2,700 kg Space requirements approx. 4700x1800x2000 mm Comprising: Bwjdpfx Abjyg Npmjceh Dry vibratory finishing system RÖSLER RT 250 EURO (year of manufacture: 1998) Wet grinding system with cover RÖSLER R 320 EC (year of manufacture: 1998) Process water recirculation unit RÖSLER Z 500 HA-TURBO-FLOC (year of manufacture: 1998) Centrifuge RÖSLER Z 800 (year of manufacture: 2014)

Condition: new, The RA 2 Tube End Finishing Machine is an essential tool for every workshop, designed to simplify the assembly and welding of tubes at a precise 90° angle. This robust device caters to various tube diameters while allowing for horizontal and vertical operation, making it versatile for both dual and corner unions. With its capability to handle tubes with wall thicknesses of up to 5 mm, from steel to non-ferrous metals, the RA 2 ensures quick and efficient machining. An eccentric shaft guarantees minimal effort during operation, enhancing productivity. The machine comes standard with an operator manual to facilitate setup and use. For your tube end finishing needs and additional inquiries, you can request a quote today and elevate your performance with KNUTH equipment. Bjdpfswhkf Hjx Abcswh

Condition: used, Year of construction: 1992, machine/vehicle number: 23011, Zusammentragmaschine / Broschürenfertigung Theisen & Bonitz TB Sprint 315 VP - TB Sprint 303 Booklet Maker / Brochure Finishing Theisen & Bonitz TB Sprint 315 VP - TB Sprint 303Zusammentragmaschine / Gatherer TB Sprint 310 VP - 15 Stations Feeder Baujahr / Year 1992 Format / Size min. 65 x 100mm Format / Size max. 350 x 500mmBroschürenfertigung / Booklet Maker TB Sprint 303 Baujahr / Year 1992 Heften-Falzen-Schneiden / Stitching-Folding-Trimmer Unit 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Kompressor / Compressor Becker Auslage / Delivery Bwedpsll A Tuefx Abcjh Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1998, machine/vehicle number: 42016, Zusammentragmaschine / Broschürenfertigung MC-80a MC-80m SPF-11 FC-11 Booklet Maker / Brochure Finishing MC-80a MC-80m SPF-11 FC-11Anlage besteht aus / Booklet Maker consist of:Zusammentragmaschine / Air Suction Collator MC-80a MC-80m - 2 x 8 Stations Feeder Baujahr / Year 1998 - Serial-No. 042016 Format / Size min. 110 x 160mm - max. 318 x 470mm Grammatur / Paper weight 50-260g/qm Stapelhöhe / Infeed height Station 50mm Geschwindigkeit / Speed 5.100 Product/hBroschürenfertigung / Booklet Maker SPF-11 - FC-11 Baujahr / Year 1998 - Serial-No. 128032 Bodpsibuq Dsfx Abcowh Heften-Falzen-Schneiden / Stitching-Folding-Trimmer Unit 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Kompressor / Compressor Rietschle Auslage / Delivery - Rüttler / Jogger PJ-77 Geschwindigkeit / Speed 1.500 - 3600 Sets/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2003, Zusammentragmaschine / Broschürenfertigung Watkiss - SlimVac Vario 10 Booklet Maker / Brochure Finishing Watkiss - SlimVac Vario 10 Zusammentragmaschine / Gatherer Watkiss SlimVac Vario 10 collator Baujahr / Year 2003 - Serial-No. ASF 1092 Format / Size min. 120 x 160mm Format / Size max. 364 x 520mm Paper weight: 40 to 240 gsm. Bwsdpstpkwyefx Abcjh Geschwindigkeit / Speed 2.500 - 5.000sets/hr. Auslage / Delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Finger jointing line Grecon ProfiJoint Year of production: 2014 Technical condition: very good Technical data: Bodpfx Abexyq Nmecswh Finished element length: 2100 mm For an additional fee, installation, start-up, and operator training are available. We also offer ongoing service.

Condition: excellent (used), Year of construction: 1988, For sale: Industrial vibratory finishing machine from the renowned brand SPALECK (Max Spaleck GmbH & Co. KG, Bocholt, West Germany) – model VAT-240. Robust unit manufactured in 1988, designed for professional finishing of components. Ideal applications include: • Surface polishing • Deburring after machining • Edge rounding • Cleaning and surface preparation prior to painting or electroplating Works with different types of media – ceramic, plastic, or steel – depending on the workpieces to be processed. Technical data: • Model: VAT-240 • Year of manufacture: 1988 • Maximum batch load: 500 kg • Power supply: 3-phase, 380 V, 50 Hz • Control voltage: 220 V • Rated current: 20 A • Protection: 25 A • Total power: 18.1 kW • Serial number: 63712 • Included: control cabinet with START/STOP buttons, emergency stop switch, and ammeter The machine is complete, in good technical condition, and ready for operation upon connection. Heavy-duty construction, discharge chute with rubber cover, and convenient media change system. Bjdpfsw Ixw Ajx Abcewh SPALECK is a German brand known for manufacturing reliable vibratory finishing machines, highly regarded by industrial plants worldwide.