Used Flat Steel Scissors for sale (22,667)

Condition: used, tank capacity: 4,000 l, GENERAL Design: upright Remarks: Tanks slightly out of round; outlet is lower than tank bottom (consider when positioning); sheet metal cutouts in the cover; nameplate only available on 2 tanks; 1 tank with ball valve (see photos) Bedpfx Aoxqdnqsbzoww Internal diameter: 1,590 mm Total height: 2,200 mm Top: bolted lid with hinged segment Location: Bremen Nameplate: Volume: 4,000 liters Cylinder wall thickness: 3 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,000 mm Last application: cosmetics (shampoo) TANK Bottom: flat bottom EQUIPMENT Outlet: available Outlet (alternative entry): 48 mm Note: slight residues TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3 mm Top wall thickness: 1.5 mm

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Bedpfxerz Tute Abzjww Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Year of construction: 1994, condition: good (used), machine/vehicle number: 2466, Offer 14415 Technical data: - Flat steel shears cuts up to 350 x 6 mm Bwedpfx Aoi E Hfujbzjw - 200 x 12 mm - section steel shears - cuts - L-steel at 90° up to 80 x 8 mm - bar steel shear - cuts - round steel up to 30 mm - square steel up to 25 mm - punching machine - punching force 380 KN - throat 175 mm - punches holes in steel up to 27 mm Ø in 10 mm - drive 400 V / 2,2 kW - space requirement approx. W 500 x H 1280 x D 1000 mm - weight approx. 900 kg

Condition: used, Type: 229R200 Winkelstahl: 150x12 / 200x100x12 mm T-Stahl: 120 mm U-Stahl-Flansch: 200 mm Flachstahl: 140x20 / 200x14 mm I-Normalprofil bis: 200 mm Gesamtleistungsbedarf: 7,5 kW Bwodps Dv Nkjfx Abzew Maschinengewicht: ca. 4,1 t Raumbedarf: ca. 1,2 x 1,8 x 2,2 m Profilstahlschere mit - Messertaegertrommel fuer 4 Messerpaare - schnellem Messerwechsel

Condition: excellent (used), approx. 54 pieces steel flat pallets with skids - used - : Price per piece: only 45.-€ (net), ex location! Manufacturer: unknown type: unknown Bedpfx Abjmx T I Hszoww Year of manufacture: unknown Steel flat pallets with skids dimension approx. 0,8 x 0,6 x 0,15 m Weight: approx. 35-40 kg per piece Condition: good - very good Available: immediately Location: D-97900 Külsheim-Steinbach

Condition: used, Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears Bwjdpefndy Nsfx Abzjw -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg

Condition: used, Hand lever shears VEB Scherenbau Nossen type ScDH10 Blade length: 180 mm Sheet thickness: max. 10 mm Flat material: 50x15 mm square solid material: 22x22 mm Bsdpeuqrabofx Abzsww Round steel: 24 mm Angle steel: 60x7mm T-steel: 60x7mm on mobile base frame Own weight: approx. 150 kg

Condition: used, PEDDINGAUS Type: 210/20 EXCELLENT CONDITION Bwsdpe Dv Nnjfx Abzjw

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Bodpfx Abji Duh Ijzjww Weight 2000 kg good condition

Condition: used, axle configuration: 3 axles, first registration: 07/1987, color: other, Year of construction: 1987, Empty weight: 7.600 kg Axle 1: left 6 mm right 6 mm Axle 2: left 6 mm right6 mm Axle 3: left 7 mm right 8 mm Bwodpfjwwuk Ssx Abzsw We have the possibility to stack trailers! 

Condition: good (used), mileage: 6,09,687 km, power: 265 kW (360.30 HP), first registration: 03/2004, fuel type: diesel, color: other, axle configuration: 6x4, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2004, Equipment: ABS, air conditioning, differential lock, = Additional options and accessories = - 1 fuel tank - Airbag - Armrest - Day Cabin - Disc brakes - Drum brakes - Electric windows - Fog Lights - Front suspension: Leaf - Open roof - Radio - Rear suspension: Leaf - Sper = More information = Bwjdpoxuu N Tofx Abzew Tyre profile: 50% Suspension: leaf suspension Front axle: Steering; Brakes: disc brakes Rear axle 1: Double wheels; Differential lock; Brakes: drum brakes Rear axle 2: Double wheels; Differential lock; Brakes: disc brakes Dimensions (LxBxH): 920 x 250 x 350 cm Technical condition: good Visual appearance: good Serial number: WMAH25ZZ64M384251

Condition: good (used), mileage: 8,09,534 km, power: 235 kW (319.51 HP), first registration: 04/1992, fuel type: diesel, color: other, axle configuration: 4x2, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, Year of construction: 1992, Equipment: ABS, crane, differential lock, = Additional options and accessories = - 1 fuel tank - Armrest - Day Cabin - Drum brakes - Front suspension: Leaf - Hydraulics - Open roof - PTO - Rear suspension: Air - Sper Bwjdpexuqgusfx Abzew = More information = Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Front axle: Steering Rear axle: Double wheels; Differential lock Dimensions (LxBxH): 800 x 250 x 350 cm Technical condition: good Visual appearance: good Serial number: YV2F2CBA8NA373239

Condition: excellent (used), Stainless Steel Cut to Length Line • Coil Weight: 2 tonnes Bwedowbzbxepfx Abzjw • Coil Width: 100 – 500mm • Cut Length: 150 – 500mm • Thickness: 0.30 – 1.0mm • Max Coil O/D: 500mm

Condition: used, Year of construction: 2002, Ladle Furnace For Steel Refining with Control Station: Capacity 30-60 Ton. With Hydraulic Room (Motors, Hydraulic Cylinders, Pumps), Electrical Control Room, Wire Feeder, Manual Hydraulic Control Station, Heraeus Multilab Inspection Units, Heraeus Temperature Inspection Probes, Spare's Room, Visual Inspection Camera, Loading Bogey & SMS Demag Stanchioning. (2002) Bedpoxq Awqefx Abzjww

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Bwsdpfx Asxdmgvebzjw Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: used, Stainless steel tank 100m3 Diameter 4m Total height 8.25m Bjdpfx Aboxtmy Uezoww

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 7,000 h, mileage: 60,000 km, load capacity: 200 kg, lifting height: 21,000 mm, fuel type: diesel, TRUCK MOUNTED PLATFORM Oil & Steel Snake 21.12 Year 2014 Working height 21 m Horizontal outreach 12 m Basket capacity 200 kg Working hours 7.000 km 60.000 All hydraulic controls Good conditions All regular documents Bwsdpjxtmq Hsfx Abzow

Condition: like new (used), Vertical stainless steel storage tank 20 m3 with agitator, 4 ss legs, manhole, valve, pump, motor 10,6 kW.... Bwjdsiuc Skopfx Abzew

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Calmic Eurovent is a leading manufacturer of drying equipment. This unit has an approximate 0.75 sqm drying area. It features three individual drying compartments, each 500mm wide x 500mm deep x 160mm high. The unit includes a hot oil recirculation system and one Leybold vacuum pump. It also comes with an electrical cabinet and a separate control cabinet. The main unit is mounted on a mild steel frame. Bwedpfx Absxnl Srszew

Condition: good (used), item: ITEM: AV-12099-VERTICAL-TANK External dimensions: Diameter 3000 mm Total H 6000 mm. Vertical stainless steel tank - 1 pc. Isolated with 100 mm rockwool completed with white trapezoidal plates. Flat sloaping bottom. Manhole bottom. Bjdpsr Ny Axefx Abzeww Topmounted agitator. Jacket 1000 mm on cylinder. AISI 304.

Condition: new, thickness of jaw 200 mm max. clamping width 205 mm Bjdju Img Ejpfx Abzoww weight of the machine ca. 21 Kg dimensions 430x200x195 mm Workbench vice with: Set of pipe jaws

Condition: used, 145,000 liter stainless steel tank Diameter: 4.95 m Tank height: 7.60 m Height of the steel structure under the tank: 80 cm Bedpfx Abexrtcmszoww Total height: 8.40 m The tank has a flat bottom and is mounted on an 80 cm high steel structure.

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Diameter: 2.80m Bjdpfsxqfwtex Abzoww Length: 17.10m

Condition: used, 150m³ (1500hl) Stainless Steel Tank Grade AISI304 Wall Thickness: 2.2mm Bottom Thickness: 3.3mm Bedpfjxcxitjx Abzjww

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Upper part: 40° slope - Lower part: 2% slope. Bodpfx Abovlpctozjww DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. The tanks are dismantled and ready for delivery.