Used Automatic Flatbed Die Cutter for sale (36,286)

Condition: used, Year of construction: 2008, Halbautomatischer Stanztiegel / Automatic Platen Die Cutter ETERNA ML 930 GIIYear 2008 - Serial-No. EP51568 M9Svk3Igvl Format 670 x 930mm Weight 2800kgs Included frame and tools, very good condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1994, Condition: ready for operation (used), A Bobst die-cutting machine for the corrugated board industry is available. Format dimensions X/Y: 1600mm/1100mm, min. sheet dimensions X/Y: 400mm/5200mm, die-cutting force: 400t, die-cutting speed: 6500/h, number of colors: 3, flute type: single/double. Including pressure unit Bobst Flexo 160, feeder Roda and crusher Pallmac. Documentation available. On-site inspection is possible. Biyh738Byi

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz Bc9Yxe0Lov - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 400018, Machine type: Embossing and punching system / Automatic sheet punching machine Machine number: 400018 Year of manufacture: 2004 Inner clamping frame width: 820 x 1134 mm Max. Cutting die size: 816 x 1130 mm Largest die-cutting area: 800 x 1120 mm with gripper edge Gripper edge adjustable from: Standard 11 - 17 mm with 13 mm wood in front of 1st knife Option 8 - 14 mm with 10 mm wood in front of 1st knife Cutting line height: 23.8 mm Height of the feeder stack including pallet: max Machine data Max. Max. number of strokes per hour: 9000 B/h Length without feeder: approx. 5190 mm Length with feeder: approx. 7770 mm Max. Width: approx. 2400 mm Max. Height: approx. 3200 mm Max. Height with open window: approx. 3930 mm Weight without feeder: approx. 30400 kg Weight of feeder W4: approx. 3000 kg. 2000 mm Height of the delivery stack including pallet: max. 1700 mm Weight of the feeder stack: max. 1000 kg Weight of the delivery stack: max. 1000 kg Height of remaining feeder stack: max. 450 mm Weight of the remaining feeder stack: max. 450 kg Height of auxiliary stack: max. 200 mm Weight of auxiliary stack: 200 kg Pallet sizes Feeder: max. 800 x 1200 mm (EURO pallet) Tray: max. 800 x 1200 (EURO pallet) Pallet height: max. 170 mm Switch cabinet Equipment: power supply, main switch, fuses, motor protection device, PLC control unit Connected loads: 3 NAC 400 V, 50 Hz, 63 A B3Oa0Jyvoo Control voltage: 24 V DC; 230 V; 50 Hz Dimensions: 2800 x 600 x 2200 mm Performance data Main motor: 18.5 kW Feeder pressure/vacuum pump: 4.0 kW Machine output: 41 kW Average output (7500 B/h): 24 kW Average power consumption (7500 B/h): 50 A Pneumatic punch Compressed air connection = operating pressure: 5.5 bar Minimum pressure: 4.5 bar Air requirement in relation to the intake volume: 27 m³/h (with one sheet stretcher) Additional air requirement: 25 m³/h (for each additional sheet stretcher) Pneumatic feeder Compressed air connection: 0.6 bar Vacuum connection: -0.6 bar Air requirement: 70 m³/h each Noise emission In accordance with DIN 45635, the sound pressure level at the machine's operating stations remains below dB(A). Machine is fully functional and fully operational. Various accessories are available. The machine can be inspected and demonstrated on site. Location: Nuremberg area

Year of construction: 2005, operating hours: 25,000 h, Condition: good (used), Stripping Station Max. Size : 1060 x 750 mm Min. Size : 400 x 270 mm Die-Cutting Output Maximum : 6.000 Sheets / Hour C93Cqra

Condition: used, Halbautomatischer Stanztiegel / Automatic Platen Die Cutter Joh. Cietz PRESTO Year 2008 - Serial-No. EP51568 Format 370 x 480mm Weight 1100kgs Included frame and tools Btwsioztz0 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2018, Condition: ready for operation (used), General Data Measurements width 1016 mm Measurements depth 1168 mm Measurements height 1854 mm Machine weight 365 kg Main Drive B8Hhzxm3Y0 Spindle motor power 5.5 kW / 7.5 kW Additional Equipment Main drive belt (a new one is installed) + 1x reserve 10 pieces new orbital cutting discs TYROLIT A80-BM/50 400x3x32mm This Buehler Large Delta Automatic Chop Cutter 10-1317-400 was manufactured in 2018. Ideal for precise and efficient cutting operations in sheet metal applications. Consider the opportunity to buy this Buehler Large Delta Automatic Chop Cutter 10-1317-400. Contact us for more information. Application Types Other Sheet Metal Machinery

Condition: good (used), Corner cutter Kolbus ECK 100 Automatic Manufactured in Germany, Kolbus Gmbh & Co. KG. Perfect condition. This is a professional, production device for trimming corners for hardcovers. Bzblipx2Ds Year of manufacture 2016. Solid construction ensures precision of operation. Interchangeable knives. Adjustable margins. One set of knives included. Compressed air supply.

Year of construction: 1983, Condition: good (used), max. size 42 x 42 cm age 1983 die cutting machine block thickness up to 2 mm B92Uf7Gclk max. 5.000 cycles / h (off-load)

Condition: used, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1983 - Serial-No. 194543 Size min.: 40 x 70mm - max. 260 x 380mm Drflbh Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1990, Condition: reconditioned (used), ELEVATED MACHINE Machine elevated 415 mm Centerline for job quick change Electronic device for sheet travel control Air conditioning for the electrical cabinet NON-STOP FEEDER MANUAL DEVICE Adjustable lateral blowers with Centerline references Suction unit with multiple adjusting Safety system for lowering the pile try Introduction table covered by antistatic steel stainless plate Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle Feed belt slow-down device Ensures smooth arrival of sheets against front lays 4 front lays, adjustable in pairs with front register control Pull-lay operator side (OS) adjustable according to Centerline, with sheet control "Double sheet "detector Fqnovg8Ha Upper frame with manual lifting device Sheet-hold down device (guiding the sheets to front lays) Upper transport equipment for paper, paperboard and corrugated board Transport belts. With lateral guidance Heated upper platen with 16 heating zones Grippers re-opening device Equipment centering and locking Locking of the chase against the upper beam Measurement of the die-cutting force using an electronic probe Steel material print supporting plate Compensating plate, thickness 3 mm (E-52). Compensation plate, 3 mm thick (E-52). It is used as a cutting plate for die cutting and as compensation plate together with the 2.3 mm thick printing plate for printing and embossing Honeycomb frame (E-6) Includes a series of cliché fixing accessories. To specify: height of the clichés of 6.35 or 7 mm Compensating plate, thickness 2,3 mm (E-62) 1 HONEYCOMB FRAME. It includes a series of accessories for fixing the clichés. 1 unit with the basic machine •Pile tray •Braking Brush Pneumatically controlled adjustable front joggers AUTOMATIC NON-STOP BELT. Pneumatically controlled adjustable lateral and front joggers with Centerline marks Removable tape feeding module. Including a trolley equipped with: 3 shafts for adjusting the advancement of the belts driven by motors 2 additional roll-holder axles for preparation outside the machine 3 sets of 8 roll holders with 3° combined spindles consisting of: 1 set of narrow rolls; 1 set of medium coils; 1 set of reels with brake 30 wide drive rollers, 38 mm wide • 1 automatic device for putting the platen "on and off" pressure 1 Margin line. Facilitates the positioning of clichés 1 device for manual tapes introduction (mounted on the autoplaten) 1 blower with nozzles to detach the belts after printing (mounted on the platen) 1 blower inside the platen to stabilize the sheets of paper before printing or die-cutting (mounted on the platen) 1 belts guide on the upper post (mounted on the platen 1 belt tension shaft driven by a motor with air cooling device (mounted on the platen) 1 bands break control system with 16 photo-electric cells with lateral adjustment for immediate machine stop in case of band breakage 1 lateral evacuation device for metal band with rotary brushes at variable speed depending on the advancement of the belts (mounted on the platen) 1 longitudinal belts cutting device (mounted on the platen) Operator safety devices Gripper Bar Chain Slip Clutch Handling of the diecutting equipment Emergency Stops Photoelectric cell safety barriers located at the feeder and at the delivery

Condition: refurbished (used), Year of construction: 2017, Number of working hours 2400 h Pressure power 110000 kg Speed 2500/2700 Sheets/h On offer here is a punch with hot foil from the brand APR Solutions. The machine is offered including warranty from the manufacturer! Model: Saroglia FUB/D 56x74 - Format: 56x74 cm - Year of manufacture: 2017 - Condition: Refurbished by the manufacturer (electronics as original) - Operating hours: 2400 - Feeding and delivery: Automatic - with hot foil - Punching: Up to 5 mm thickness Bwriiqaahs - Speed: 2500/2700 sheets/hour - Paper weight: 80 - 1800 gr/sqm - Pressure force: 110000 kg (110 tonnes) If you require further information, please contact us at any time!

Condition: new, Year of construction: 2025, We are a Polish manufacturer of recycling machines. We offer personalized solutions compatible with die-cutters and die-cutting machines from various brands. All parameters are customized to meet individual customer needs. The RS-601 shredder collects waste directly from the die-cutter, ensuring efficient and smooth operation. It is equipped with a conveyor belt and a feed hopper with an openable bottom, making handling easier and optimizing production. By39Setcuw We invite you to cooperate with us. RS TeamTech Team

Condition: good (used), Heidelberg Cylinder S 54×72 die-cutting machine Machine from production, ready to work. Format 540x720mm Bzbex3Azrm Machine prepared for die-cutting. Fully automatic, central lubrication. The set includes a mounting frame, sheet metal for the cylinder, trolleys, a set of fillers and locks.

Year of construction: 2020, Condition: like new (used), Year 2020 Counter: only 1.9 Million sheets like new machine! Format 760 mm x 1060 mm Type FLAT BED LASER DIE CUTTER LAUDA chiller Max sheet format: 760mm X 1060mm/ 30" X 41.7" Min sheet size: 500mm x 700mm/ 19.7" x 27.5" Drcvud Materials: corrugated board flutes F, E, up to 2mm Cutting area: 740mm x 1050mm/ 29" x 41"

Condition: used, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1969 - Serial-No. 171075 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm B0G7Tjjtha Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Buldy329Wo Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Condition: used, Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg S Year 1958 - Serial-No. 12218 Bgfu02Jn7M Size max.: 540 x 720mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Beier UER M automatic corner cutter Production Germany. Perfect condition. This is a professional, production device for rounding corners. Solid cast iron construction, strong pressure ensure precision of operation. Interchangeable knives. Adjustable margins. A knife with a radius of 7 mm is included. Bulc2Dgnge Stack height 65 mm Weight 130 kg Efficiency 50 cycles/min Power supply 400 V This is the currently produced model.

Condition: used, Year of construction: 1968, machine/vehicle number: 32236, Buchdruckzylinder / Letter Press Zylidner DIE Cutter Heidelberg SBBYear 1968 - Serial-No. 32236 Size max.: 570 x 820mm Bb2Wqyswsv0 Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 6.200kg3Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, ML-1400 NXL die cutter The machine is brand new. It is the heaviest die cutter in this format. Format: 1400 × 1000 mm Weight: 6500 kg 380 V power supply Engine: 5.5 kW Working speed 15 +/- 2 cycles / min Drbxkx Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in EU. Possibility of testing in the showroom in Radom.

Condition: used, Year of construction: 1966, machine/vehicle number: 155017, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHTYear 1966 - Serial-No. 155017 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mmKomplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Jkoluqln On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1963, machine/vehicle number: 142, Letter Press Tiegel - DIE CutterSize min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Wsfbkclk Standard chase: 260 x 340mm Skeleton chase: 260 x 350mmComplete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1962, Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg KSB Year 1962 - Serial-No. KSB 308003 Papierformat / Size min. 125 x 150mm - max.: 400 x 570mm Druckgeschwindigkeit / Speed min. max. 5.000 sph Punching pressure: 60T Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include fram Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Dpa2Fr

Condition: used, Year of construction: 1957, machine/vehicle number: 120523, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHTYear 1957 - Serial-No. 120523N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mmKomplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame B983I2Y08O Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test