Used Fold for sale (7,180)

Condition: used, Year of construction: 2011, functionality: limited functionality, We are offering for sale a used, automatic creasing and folding machine "Multigraf Touchline CF375" at a competitive price. Iiodpfsxxb T Tex Aanek The machine is operational, but the folding is not entirely precise and requires adjustment. Replacement motor with sensor included. Once adjusted, the machine can function properly, or you can use it for spare parts. Creasing and folding machine 6 standard folding types Easy operation via touchscreen Automatic job changeover without tools Piled feeder and suction belt feed Flexible delivery system Technical specifications: Feeder capacity: 180 mm Max. sheet format: 375 x 1,050 mm (with extension table) Min. sheet format: 105 x 148 mm Double sheet detection: Yes Paper weight: 80–400 gsm or max. 0.4 mm Power supply: 100–240 V, 50/60 Hz Double sheet detection

Condition: used, Year of construction: 2009, cutting height (max.): 102 mm, cutting width (max.): 800 mm, saw blade diameter: 315 mm, planing width: 310 mm, total length of planing tables: 1,500 mm, total width: 2,120 mm, total length: 2,600 mm, total height: 1,300 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 10,000 rpm, overall weight: 900 kg, chip removal: 5 mm, chip removal for surfacing (max.): 5 mm, number of planer blades: 4, spindle speed (max.): 10,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: scorer, No. 04501 5-fold combined machine Felder CF 531 Used, year of construction 2009, very good condition Circular saw tiltable - table router tiltable - surface planer / thickness planer - preparation for long hole drilling support / long hole drilling device Circular saw Motor power 3 kW Scoring unit Sliding table 2500 mm long Manual saw blade tilting 90° - 45° Saw blade diameter 250 - 315 mm Spindle diameter 30 mm Iisdpfxoxzk Thj Aanjk Cutting height max. 102 mm Cutting width approx. 800 mm Outrigger table with telescopic cross-cut fence Pivoting cross-cut fence with degree scale Moulder Motor power 3 kW Moulder table opening diameter 180 mm Maximum cutter diameter 300 mm Spindle diameter 30 mm Manual spindle swivel 90° - 45° Speed 3000 / 6000 / 8000 / 10000 rpm Planer Motor power 3 kW 4-knife planer shaft Planer Table length 1500 mm Planer Table width 310 mm Chip removal max. 5 mm Parallel fence pivotable 0° - 45° Thicknesser Table length 540 mm Thicknesser width 306 mm Thicknesser height 4 - 220 mm Switchable feed rate 6 m/min Preparation for long hole drilling support / long hole drilling device With travel device and handlebar Machine CE-compliant, GS-tested Technical documentation available as .pdf file Transport dimensions approx. 2600 x 2120 x 1300 mm LWH Weight approx. 900 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2017, 1 used hydraulic 5-station combined high-performance profile steel shear Technical Specifications: Punching Station Punching force: 45 t Cutting capacity (steel 400 N/mm²): Ø 22 x 15 mm Ø 38 x 8 mm Throat depth: 175 mm Max. stroke: 50 mm Number of strokes: 20 / min Working height: 955 mm Notching Station Max. material thickness: 8 mm Max. notch width: 35 mm Max. notch depth: 75 mm V-notch tool size: 100 x 100 x 8 mm Flat Steel Shear Isdpfexz Dn Eox Aaneik Max. material width x thickness: 200 x 15 mm 300 x 12 mm Blade length: 316 mm Mitre cut 45° (leg length x thickness): 80 x 10 mm Working height: 955 mm Bar Steel Shear Capacity round material: 30 mm Square material: 25 mm Angle Steel Shear Cutting capacity 90° L-profile: 100 x 100 x 10 mm Cutting capacity 45° L-profile: 70 x 6 mm Cutting capacity U/I-profile (accessory): 80 x 45 mm Cutting capacity T-profile (accessory): 40 x 5 mm Working height: 1140 mm Motor power: 4 kW Machine dimensions: approx. 1500 x 950 x 1680 mm Machine weight: approx. 1400 kg Accessories / Special Features: • Punching station, flat steel shear, angle steel shear, profile steel shear, notching station • Stepless stroke adjustment • Heavy-duty and robust welded construction • Powerful 400 Volt motor • Jog mode • Triangle notching station / V-notch tool • With MUBEA holder for punch No. 1, No. 2 and No. 3 as well as die No. 30, No. 45 and No. 60; use of punch and die No. 4 and No. 80 possible as option • Punch holder with bayonet coupling • Advantages of punching over drilling: - Significant time savings – short cycle times - No chips - No coolant required • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2003, condition: used, Manufacturer: Pester Pac Automation Model: Pewo-fold 1 Year: 2003 Type: Cellophane wrapping machine Film type: OPP Film width: 90–300 mm Film thickness: 0.020–0.050 mm Max. roll diameter: 350 mm. Iiodpfxex Aulko Aanjk Max. capacity: 50 strokes/min Format (min): 60 mm x 30 mm x 60 mm Format (max):250 mm x 250 mm x 140 mm Formats: 2x2 = 90 x 100 x 54: capacity: 50 cycles/min 2x3 = 90 x 150 x 54: capacity: 35 cycles/min 2x4 = 90 x 200 x 81: capacity: 18 cycles/min Power supply: 4 x 400 V + N + PE / 50-60 Hz Installed power: 4 kW (6 A) Air pressure: min. 4 bar / max. 10 bar Documentation available

Condition: good (used), Year of construction: 2010, Very good used condition Specifications: Number of roller stations: 9 units Profiling speed approx. (based on 72mm drive roller diameter): 16 m/min Max. sheet thickness for folding: 1.5 mm Max. profile height: 20 mm Working shaft diameter: 28 mm Center distance of working shafts: - Vertical: 72 mm - Horizontal: 100 mm Minimum roller gap (both sides): 60 mm Connected load: 3.0 kW Rated current: - At 230V: 12A - At 400V: 7A Fuse protection: 16A Net weight approx.: 430 kg Ijdox Ekb Aopfx Aaneik Sound level: 70 db(A)

Condition: good (used), Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 Iodpfx Aaefndy Nonjik -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg

Condition: like new (used), Year of construction: 2020, Lid Removal System for Capsule, 16-cavity Short Description: The lids are removed from the open mold using the removal arm. The injection-molded products are extracted on the ejector side. Presence of the parts is checked on the removal arm. As soon as the removal arm reaches its end position, the lids are transferred into the prepared box by a vertical servo axis. Once the box is full (by counting lids), the box is conveyed outwards and the next empty box is brought in. Technical Data: Product type: round lid Ijdpjwuk Sgsfx Aanjik Dimensions: DN 50 mm Height: 6 mm Number of cavities: 16 IML system cycle time: 5 s

Condition: used, Year of construction: 2005, TB sprint 304 QSM stitch-fold-trim unit Format open max.: 35 x 50 cm Ijdpfxjh I Ahxj Aansik Format open min.: 6.5 x 15.5 cm smallest booklet: 6.5 cm spine length x 4 cm with head-foot trim: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Up to 3100 cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorised format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper 4 stiching heads

Condition: good (used), Year of construction: 1985, functionality: fully functional, Pocket – knife folding machine (cross fold machine) MBO – working width till 52 cm, year of manufacturing 1985, good condition, modell K 54/4 KL. Technical description: Maximal format: 52 x 80 cm. Iiedpfx Aaerrw Rkjnek High pile feeder with automatic sheet separation head at the back of the pile. Counter. 4 folding pockets. 1 folding knife perpendicular to the folding pockets. Mobile chute delivery for the full working width of the machine - till 52 cm. Year of manufacturing: 1985. Good condition. Possibility of inspection that machine.

Condition: used, Year of construction: 1991, Folieneinschlagmaschine für pharmasichere Einzel- und Sammelgebinde - Film Wrapping Machine for pharma single and multipacks Pester PEWO-foldYear 1991 - Serial-No. N-261 Maschinen Abmessungen: 2950 x 1450 x 2100 mm [L x B x H] Ausstattung: K-Stapler Iiodsh Axgnopfx Aanok Min. Formatbereich: Faltschachtel 30 x 15 x 60 mm [a x b x h] Gebinde 60 x 30 x 60 mm [L x B x H] Max. Formatbereich: Faltschachtel 150 x 80 x 250 mm [a x b x h] Gebinde 250 x 250 x 140 mm [L x B x H] Leistung: bis zu 60 Gebinde/ Min. Steuerung: Schneider Electric PacDrive 3 / Rockwell Automation (Allen-Bradley) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Iisdpevwlqqsfx Aanjk Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears, punching and notching machine -Manufacturer: Mubea, profile steel shear punching and notching machine type HIW 600 -Pressure force: 60 to -Applications: punching, shearing, cutting, notching -Punching: Throat depth 260 mm -Accessories: incl. punching tool, see photos Iodpfx Aaetxkn Usnoik -Dimensions: 1470/960/H2140mm -Weight: 1283 kg

Condition: like new (used), Year of construction: 2019, Capsule Extraction System 16-cavity with Packaging Automation Short description: Capsules are removed from the open mould using the extraction arm. The presence of the parts is checked on the extraction arm. As soon as the extraction arm reaches its end position in the robot, the parts are flipped in a 180° turning station. After the turning process, the capsules are stacked directly in a horizontal orientation. A separate stack is formed for each cavity. Once the stacks reach a quantity of 24 parts, all stacks are ejected into a buffer. This buffer is driven vertically by a servomotor. Once all 16 stacks are in the buffer, each tier moves to the level of the stacking table. As soon as a row reaches this level, all 4 stacks are pushed onto the table. Iodjwufxzopfx Aansik From the table, the stacks are then automatically packed into boxes using a 6-axis robot. Technical data: Product type: Capsule Dimensions: DN 56 mm x 51.3 mm Number of cavities: 16 IML system cycle time: 5 s

Condition: excellent (used), SDD Square Fold Module SFM 0704 + 2 Side Booklet Trimmer BLT 0202 Perfect condition , low meter ! As an experienced retailer of second hand copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. We ship copiers coming from, and maintained by Konica Minolta France. Our company offers the largest range of Konica Minolta production copiers, and handle world-wide deliveries on request. Ijdpfxsfybf Ao Aanoik

Condition: ready for operation (used), Type ACC 2.4 Iijdpfjd H Ncpex Aansk

Condition: used, Year of construction: 1987, machine/vehicle number: 33909, Falzmaschine - Folding Machine Stahl T52/4-4-X-SAK66Year 1987 - Serial-No. 33909/87-136159 Folding Size min. 100 x 150mm Folding Size max. 520 x 820mm Folding Type: Iedpfxjh Axuqj Aanjik 1. Unit 4 Buckles - folding width 500mm 2. Unit 4 Buckles - folding width 500mm 3. Unit knife Pile height max. 690mm Stream delivery SAK 66 Include Compressor Counter - Control PCS 100 Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), gate fold attachment Ijdoir A I Rjpfx Aansik

Year of construction: 1992, condition: used, Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones -Type: RSD II 8 Ijdpfxspwngbs Aaneik -P max: 21kW -Transport dimensions: 490/400/H490 mm -Weight: 30 kg

Condition: used, machine/vehicle number: 83357220, Falzmaschine / Folding Machine (Pharma-Fold) Multipli 464SSerial-No. 83357220 Unterflur-Sauganleger / Non-Stop Feeder Anleger Format / Feeder Size min. 10x10cm - max. 45,5x63cm Leistung / Output max. 220m/min Papiergewicht / Paper weight 40-200g/m2 4 Taschen 4 Bogenweichen / 4 Buckles 4 Deflectors 1 Kompressor / 1 Compressor Schuppenauslage / Stream Delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Iijdpfxorl Rdqe Aanok Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: Iodpfx Aaef Ek H Usnoik -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg

Condition: used, Year of construction: 1999, machine/vehicle number: 103638, Falzmaschine / Folding Machine Heidelberg Stahlfolder KD 78-4-KZ Year 1999 - Serial-No. 103638-258036 Arbeitsbreite max. 780mm / Working width max. 780mm Rundstapelanleger / Round Pile Feeder 1. Station 4 Taschen / 1. Station 4 buckles 2. Station 3 Schwerter links/rechts Auslage / 2. Station 3 knives left/right delivery Ijdpfemikq Ajx Aanoik Stehendbogenauslage / Delivery Stacker Stahl SBP 46 Rietschle Kompressor / Rietschle Compressor Inklusive Handbücher / Manuals included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1992, Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones -Type: RSD II 8 Iodpjudqb Ajfx Aanjik -P max: 28 kW -Transport dimensions: 490/430/H460 mm -Weight: 30 kg

Condition: good (used), Creasing and folding machine Heidelberg Stahlfolder + Popp Maschinenbau SRT + MWS Machine in very good condition, ready for production. Like new. Year of production 2012. It was used in the production of invitations, photo book inserts and leaflets. Modular design allows for expansion, e.g. installation of marking printers. Technical data: Paper format min 105 x 150 mm Paper format max 520 x 720 mm Iijdpfsw D E I Uex Aanek Feeding from a high stack Main and cross module with the possibility of installing creasing, perforating and cutting tools. Possibility of installing Heidelberg or Techni-Fold tools, Smooth speed regulation Becker compressor Double sheet sensor Electronic counter with packaging Set of inspection cameras.

Condition: used, Year of construction: 2008, Folding machine Heidelberg-Stahlfolder TH 82/442 Year: 2008 Description: - 16 page folder Iiedpfx Aaevu Tqaonjk - Colour monitor with touch screen - Automatic setting Feeder - Round pile feeder - Excluding pump Buckle folding unit: 1 - First buckle folding section with 4 buckle plates - Automatic setting - Perforating shaft - Noise hoods for upper folding buckles Buckle folding unit: 2 - Second buckle folding section with 4 buckle plates - Automatic setting - Perforating shaft Buckle folding unit: 3 - Third buckle folding section with 2 buckle plates - Automatic setting Delivery Heidelberg-Stahlfolder TSH 70 Year: 2008 - Horizontal stack delivery with pressing

Condition: good (used), Heidelberg Stahlfolder KH66-6KTL +SKPD 66 + gluer Machine in perfect condition, ready to work. RFH-66 continuous feed BCUH-66 folding module Year of production 2005 6 cassettes 2 electronic knives side cassette with 1 knife SKP.D 66 press auxiliary roller for perforation First rollers divided for gluing Gluing machine with pneumatic nozzles Max format: 660x1200mm Isdpjvbb Nqofx Aanoik two LCD control panels Counter with packaging, speed control, etc. Feeding on a suction roller Soundproofing covers. Window cassette. Documentation, additional tools and equipment.