Used Glass Machine for sale (67,167)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Fgodpoh Ek H Sjfx Am Tjd Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: used, Year of construction: 2019, functionality: fully functional, LISEC INSULATED GLASS LINE – Year 2019 LISEC IGU LINE H 2500 mm LH/RH Max. glass size: h2500 x 3500 mm Min. glass size: 350 x 180 mm Glass unit thickness: 12-80 mm Shapes: according to Lisec catalog Thickness of flexible spacer: 8-25 mm Composed of: LISEC VHW-D25/V6 - automatic vertical washing and drying system for flat glass sheets Brush configuration: 6 brushes LISEC RSVN-35/25U - automatic vertical station for inspection and positioning of spacer frames LISEC VSA-35/25 - fully automatic vertical system for the application of flexible spacers LISEC SSV-25 - automatic robot for sealing and closing the last corner Fedpfxjzhm Sms Am Tegd LISEC FPS-35/25U2B - fully automatic vertical press for lamination, flat pressing, and gas filling (Argon or Krypton) LISEC VL-1N/25 - fully automatic vertical extrusion and sealing robot LISEC DOS-1TH - high-pressure dispensing and mixing station for two-component sealants (such as polyurethane, polysulfide, or silicone).

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 336.067, 3-head glass bottle capping machine Fodpfx Amjw R Tvxo Tjgd

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, refurbished in 2023 NEW: - slides on both sides Fgjdozk Ew Tepfx Am Tod - conveyor - conveyor slats - tool kit

Condition: good (used), Year of construction: 2006, total length: 16,500 mm, - washing machine (requires renovation) - assembly station - panel press without gas filling, in good condition (size 2100 x 2500 mm) - knockdown table Fodpfx Aozk A Hxem Togd - year: 2006 - line length: 16.5 m - direction: right to left

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), Batch ball mills find applications in various industries where the processing of materials in discrete batches is required. The versatility of batch ball mills makes them suitable for a range of applications. Here are some common batch ball mill applications: 1. Ceramics Industry: - *Glaze Preparation:* Batch ball mills are extensively used in the ceramics industry for preparing glazes. Raw materials such as feldspar, quartz, and clay are ground with ceramic balls to achieve the desired particle size for glaze formulation. 2. Chemical Industry: - *Material Grinding:* Batch ball mills are used for grinding and blending various chemical materials. This includes the production of pigments, dyes, and other specialty chemicals where precise particle size control is crucial. 3. Pharmaceuticals: - *Drug Formulation:* In pharmaceutical manufacturing, batch ball mills are used for grinding and blending powders to create drug formulations. The controlled environment provided by these mills is essential for maintaining the integrity of pharmaceutical compounds. 4. Food Industry: - *Ingredient Mixing:* Batch ball mills may find application in the food industry for mixing and grinding ingredients. This can include the production of food additives, flavorings, and other powdered or granular products. 5. Mining and Minerals Processing: - *Ore Grinding:* Batch ball mills are used in mining and minerals processing for grinding minerals and ores. The controlled grinding helps in obtaining the desired particle size for subsequent processes, such as mineral separation or extraction. 6. Paints and Coatings: - *Pigment Dispersion:* In the paints and coatings industry, batch ball mills are employed for dispersing pigments into paint formulations. Achieving a uniform particle size is crucial for the quality and appearance of the final coating. 7. Building Materials: - *Raw Material Grinding:* Batch ball mills are used in the preparation of raw materials for the production of building materials, such as cement and concrete. Grinding of materials like limestone and clay helps in obtaining the desired fineness for subsequent processes. 8. Electronic Materials: - *Ceramic Powder Processing:* In the electronics industry, batch ball mills can be employed for processing ceramic powders used in the production of electronic components and insulating materials. 9. Research and Development: - *Material Testing:* Batch ball mills are often used in research and development laboratories for testing and optimizing material formulations. They provide a controlled environment for small-scale processing and experimentation. 10. Customized Applications: - *Specialized Processes:* Batch ball mills can be adapted for various specialized processes in different industries where precise grinding and mixing are required. Custom modifications can be made based on specific application requirements. Fgjdsq I N H Nspfx Am Tjd When using a batch ball mill, it's important to consider factors such as the type of material being processed, desired particle size, and the specific requirements of the end product. Additionally, following the manufacturer's guidelines and maintaining proper operating conditions are essential for efficient and effective milling processes. Technical details We have different options for different requirements, please contact our team for more info.

Condition: used, scoring head, glass cutting table, glass cutting table, glass cutting machine -Number: 21x scoring heads available -Manufacturer: Eitzenberger Luftlagertechnik GmbH Fjdpsb Nfcujfx Am Tsgd -Item no.: 093329 -Price per piece -Dimensions: 310/160/H60 mm -Weight: 0.5kg/pcs

Condition: used, Year of construction: 2009, REINHARDT-TECNIK ECOSTAR 250 Fgedpfxjzhxy Aj Am Tod

Condition: repair required (used), Year of construction: 2008, For sale: Bottero Technopower CNC glass processing center. The machine is currently not operational and requires an interchangeable distributor subassembly part, as well as a few smaller components. The machine has been completely refurbished, but the owner did not purchase the aforementioned part needed to get it running. The machine is being sold in its current condition. Disassembly, loading, and transportation of the machine are the responsibility of the buyer. Fgedpfjzh Uncex Am Tod Available for immediate removal!

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 41027512-14, total length: 11,900 mm, total height: 3,600 mm, overall weight: 4,100 kg, input voltage: 400 V, power: 30 kW (40.79 HP), Szlifierka BOVONE ELB10 Rok produkcji 2014. Najlepsza krawędziarka na światowym rynku. Charakteryzuje się bardzo sztywnym korpusem. Posiada przenośnik wjazdowy i wyjazdowy o udźwigu 800 kg. - Po Generalnym remoncie (2025 r) - Rozebrana do gołego korpus, zregenerowane sanie, wrzeciona, wymienione wszystkie uszkodzone elementy m.in. takie jak, bieżnia dolna tylnej belki, nawroty tylnej belki, nowe tylne klepki, listwy prowadzące przedniego pasa, (przednie klepki 2023r.), nowe łożyska na kołach przenośnika wjazdowego i wyjazdowego, zregenerowane myjki traków, nowy olej w napędzie głównym, nowy pas zębaty na przenośniku wyjazdowym. Maszyna kompletna z dodatkowym wyposażeniem takim jak przedłużany wjazd, wyjazd, podwyższana, majka pasa przedniego i tylnego, sprzęgło przenośnika wjazdowego, zwiększona możliwość szlifowania do 50 mm grubości szkła Wszystkie rzeczy które wymagały naprawy lub wymiany zostały wykonane na oryginalnych częściach przez autoryzowany serwis. Możliwość przyjechania sprawdzenia i wykonania prób. Maszyna jest technologicznie gwarancją wysokiej jakości szlifu, jest nie do zniszczenia. Przybliżone wymiary zewnętrzne Długość 11900 mm Szerokość 1200 mm Wysokość 2900 mm Całkowity ciężar linii 4100 kg Zapotrzebowanie prądowe: moc 30 kW Wymiary szkła o maksymalnej grubości 6 mm 40 x 40 mm Wymiary szkła o grubości nie większej niż 20 mm 50 x 50 mm lub 40 x 80 mm Grubości nadające się do obróbki Od 2 do 50 mm Prędkość przesuwu Zmienna od 0,35 do 5,4 m/min Wysokość płaszczyzny roboczej 850mm Fodpjyv Uprefx Am Tsgd

Condition: used, functionality: fully functional, FOREL Insulating Glass Line Fgedpsy If Aysfx Am Tjd - Washing Machine (6 brushes, Low-E) FOREL VW2500 (2009) Max Height: 2500 mm Min. Dimensions: 310x160 mm Thickness: 3-40 mm - Scanner LISEC (2014) - Gas Press FOREL APG 250 (2009) Max. Dimensions: 2500x4500 mm Min. Dimensions: 190x320 mm Max Manual Opening: 69 mm Working Direction: Right to Left

Condition: used, functionality: fully functional, LISEC PVB Lamination Line Composed of: TERRUZZI Autoclave – Year 2007 Washing Machine LISEC HVM26B6 – Year 2015 White Room Fjdpfjy I Sd Rex Am Tsgd Mangle Dimensions 5500x2800 mm

Condition: used, Year of construction: 2007, functionality: fully functional, BATTELLINO FP5 – Year 2011 Straight Line Edging Machine Number of wheels: 5 Min. glass thickness: 3 mm Max. glass thickness: 20 mm Min. glass dimensions: 80 x 80 mm Max. glass weight: 200 kg Speed: 0-4 m/min Machine dimensions: 5458 x 811 x 2087 h mm Worktable height: 830 mm Machine body: 2037 x 811 mm Input arm length: 1707 mm Output arm length: 1707 mm Fgjdpfxjzb Dzao Am Ted Weight: 1600 kg Power: 8.3 kW Water tank capacity: 200 lt Air pressure requirement: 6 bar Glass linearity: 0.1 mm per 2 meters of glass

Year of construction: 2009, condition: ready for operation (used), Glass width: 1500mm, glass thickness range: 3mm-70mm, max. workpiece weight: 350kg, max. glass height: 1500mm, machine dimensions X/Y/Z: approx. 5100mm/1350mm/2700mm, weight: approx. 1800kg. Including integrated blasting guns, recovery system RGWS 255 and dust extraction system Dust-EX 1703. Documentation available. An on-site inspection is possible. Fjdozka Ndepfx Am Togd

Condition: excellent (used), Year of construction: 2002, Complete system with support/transport table with edge delamination and storage rack for laminated safety glass. Automatic glass stop and glass-rotating device. Fgsdpfx Amsxap Axs Ted

Condition: good (used), Year of construction: 1994, The machine was restocked a year ago and fitted with new brushes. The washing brushes are in very good condition! 8 brushes, Without inlet and outlet, With control cabinet and dryer fan, Working direction: from right to left, 2.3 m washing height, Glass thickness: 4-15 mm, Fgjdpfx Amsqc Udio Tjd Width: 2900 mm, depth: 1100 mm, height: 3400 mm.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Bavelloni Gemy V10 vertical straight-line grinding machine with 10 spindles and a variable mitre function, in fully refurbished condition. The machine features an extended infeed and outfeed. Only original parts were used during the refurbishment. Fedpfx Amjzkumds Togd

Condition: used, • Load capacity 150 kg • Year of manufacture 2013 • Maximum pane/frame size – 1500 x 2400 mm • Machine no. – L-220.1743 Fgsdpfxowcm U He Am Tjd • Price upon request

Condition: good (used), - Completely overhauled by us, ready for immediate use - Type: 100013 - Serial number: 011136 - Glass thickness 2-12 mm - Minimum glass dimensions 120 x 80 mm - Max. Washing width: 1000 mm - Dimension: L=2900mm W=1650mm H=1250mm - Roller spacing 55mm -3 pairs of brushes / 1 pair of racks - Connected loads: 380/50V, 13kW - Price on request Fedpfxjr Nvlde Am Togd

Condition: good (used), Machine for irregular glass grinding Fsdpfx Amszg Awpj Tjgd

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 314-042581, Lisec Washing Machine VHW - 25/6M - Year: 2008 - Weight: 4,878 kg - Power: 75.10 A - Brushes: 6 - Includes pre-wash zone Fgjdpfxszkapws Am Tsd - Glass thickness: 3-20 mm

Condition: good (used), Year of construction: 2020, functionality: limited functionality, machine/vehicle number: ADL 2200/6, total height: 2,200 mm, Insulated glass production line and refrigerator with pumps for water purification Fgjdpfx Amszgu Rho Ted a) ADL 2200/6 insulated glass production line b) BM7 butilex applicator, 7 kg c) TMPB 200 two-component extruder d) F-200 refrigerator e) PKM strip cutting machine f) SM 25 strip filling machine g) R.T.M. rotary table h) Water purifier

Condition: used, functionality: fully functional, machine/vehicle number: 80796, Machine is in a perfect condition, fully operational, needs to be dismantled on site in Vilnius, Lithuania. Seller offers dismantling, loading on the truck as well as delivery. Fgjdpfjvddplsx Am Tjd

Condition: new, Year of construction: 2023, functionality: fully functional, Sigmatek Central Processing Unit DCP646, new part originally packed 100MHz, 2MB memory Fedpfx Aezhg Ibjm Tegd HW: 5.6 X1.1 SW: 97030C-72

Condition: excellent (used), Year of construction: 2005, operating hours: 8,000 h, functionality: fully functional, travel distance X-axis: 4,120 mm, travel distance Y-axis: 2,310 mm, For sale: Intermac Master 45 glass/stone processing machine, the largest unit ever produced. The machine was manufactured in 2005, with approximately 8,000 operating hours (including only about 100 hours dedicated to stone processing). The company is offering this machine for sale due to relocation and modernization of its machinery fleet. Condition: The machine is in very good condition—protected against corrosion and has undergone a comprehensive overhaul. Most hoses and lines have been replaced, all leaks sealed, filters changed, coolant and lubricants replaced, axis brakes changed, door wheel bearings and control unit fuse replaced, as well as air hoses and both suction and return hoses for the vacuum pump. Technical water pump hoses, clean water hoses, and filters have also been replaced. The radiator has been professionally cleaned, the lubrication system has been cleaned, and the coolant and lubricant tanks refilled. Operational status: The machine is fully functional and ready for immediate use. Professional geodetic measurements (laser scanning, photogrammetry) were conducted to verify machine geometry. Technical specifications: 1. Working area: 4.12 × 2.31 meters 2. Software: ICam Fsdoymgflopfx Am Tsgd 3. Suction cup set: 160 mm round (2 pcs), 120 mm (2 pcs), 90 mm (2 pcs) 4. 3 reference starting points 5. Stone-processing tools included: 5 ISO40 tool holders, 45 mm cutting mill, 20 mm diameter bit, “0” surfacing mill, set of 5 polishing pads, 35 mm hole saw, 120° lettering engraver—all tools are very lightly used. The machine is currently assembled and operational. It is a well-maintained, rust-free unit in full working order (interested buyers can request videos of the machine in operation). Throughout its lifespan, the machine has been stored in a dry, heated industrial facility. Buyer is responsible for disassembly and transportation. Disassembly services can be arranged upon prior agreement if needed. A VAT invoice will be issued. The listed price is NET. Possible disassembly date: From 10/02/2026 onward. Additionally, a Renner 15 kW compressor with a 500-liter pressure buffer tank can be purchased. Preferred contact method: email.