Used Folding A3 for sale (5,970)

Condition: used, Year of construction: 1985, Folding system Note: The system has been refurbished and received a new control system in 2013! Folding system consisting of: Lifting table with pusher Roller conveyor Infeed Transfer system and workpiece pre-cleaning Double-end profiler Manufacturer: Homag Type: FG63 Year of manufacture: 1985 Technical data - with adhesive strip application - Machine for profiling and folding the edge strips - Milling station on both sides - Control system: Siemens Simatic Touch - Glue application unit Iiedpfxszuynzs Ahnjg - Folding unit for folding the pre-folded workpieces - Sliding shoe for pressing - Extraction table for material removal Electric scissor lift table Manufacturer: Altek Year of manufacture: 2014 Technical data - Load capacity max. 1000 kg - with attached roller conveyor - Dimensions approx. 3100 x 1000 mm - with height measuring device for automatic detection of stack height and corresponding cycle time Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1988, Format: 560 x 900 mm Equipment: Flat pile feeder 6 bags Cross-fracture aggregate Integrated cutterblocks Electrics & Meters Maximum format: 560 x 900 mm Minimum format: 100 x 150 mm Iedpezyyulefx Ahnoig

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge Ijdpfxjzuykvo Ahneig 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Year of construction: 2009, - Edge trimming mills - Gluing unit for EVA hot melt adhesive - Pressure zone - Cutting unit - Copy milling - Pull blades - Deburring unit Edge banding machine Manufacturer: Homag Type: KAL 330/6/A3/S2 Year of manufacture: 2009 Technical data - Edge trimming mills - Gluing unit for EVA hot melt adhesive - Pressure zone - Cutting unit - Copy milling - Pull blades - Deburring unit Iisdpfxezuyhzj Ahnog Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Iiodpfx Aozuyhhehneg Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.

Condition: used, mileage: 3,82,000 km, first registration: 03/1998, fuel type: diesel, fuel: diesel, Year of construction: 1998, MAN FE 18.264 FBL A3 tank truck for diesel and heating oil, 2 compartments, 10,250 liters !!TANK AND PUMP TRUCK!! !!TANK CLEANING VEHICLE + TANK TRUCK!! !!Very good overall condition!! Equipment of the truck: • EURO 3 + PMK • 260 hp • Engine displacement: 6,871 cm³ • 8-speed manual transmission - dual H-pattern • Cruise control • Engine brake • Differential lock • Leaf / air suspension • Radio - CD player • On-board computer • Horn • Driver airbag • Sunroof • 1 x tank, 250 liters • Wheelbase: 3,900 mm • Unladen weight: 7,600 kg • Payload: 10,400 kg • GVW: 18,000 kg • Tires: 295/ 80 R 22.5 • Tire tread: 15/15 10/11 11/11 mm TANK BODY: ESTERER Iedszyzwhopfx Ahnoig • Year of manufacture: 1998 • For diesel and heating oil • 2 compartments • 6,200 + 4,050 liters = 10,250 liters • FMC measuring system from Sening, type GMVT 703-J • TKZ system (temperature-compensated meter) • Printer • 2 x hydraulic hose reels • ADR compliant! • Tank inspection valid! Tank cleaning system: Küller Fahrzeugbau • Year of manufacture: 1998 • Water tank capacity: 1,600 liters • Test pressure: 4 bar - German vehicle! - MOT/TÜV: NEW! Subject to errors and prior sale.

Condition: used, Year of construction: 2010, gebraucht 2010 080065 prompt, Zwischenverkauf v Deutschland 29800 € 1 2040 mm 3 mm 2 mm 4.5 mm Motorisch 1.5 kW 1.1 kW 3060 mm 1650 mm 1500 mm 2730 kg 750 mm 140 mm 50 °/sek CNC control ECT (Schneider Magelis) - Input of bending angle, depth stop dimension, lifting height, folding, precut - max. 36 bending angles can be saved per set - max. 510 sets can be saved - comfortable 7.5" color touch TFT monitor - Power mode for material-friendly operation - Soft start of the bending beam and the depth stop - Visual user guidance in the event of faults (diagnosis center) - Selection of different languages ??such as German, English ... CNC back gauge - Back gauge range 6 - 750 mm - Drive via belt - 6 stop fingers - support plates with brushes Sectioned goose neck rail height 75 mm Additional 10 mm rail on the bening beam Flat rail R 1 mm Flat rail R 2 mm Mechanical drive via gear brake motor Upper beam drive via double eccentric Foot pedal Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility Iedpfswiri Ajx Ahnoig • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, control type: CNC control, controller manufacturer: ESA, controller model: Touch Panel, pipe diameter (max.): 30 mm, pipe length (max.): 4,000 mm, tube wall thickness (max.): 4 mm, overall weight: 3,700 kg, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, Tube bending machine Transfluid - DB630 A3 CNC MACH-ID 9783 Iedpfxozvfq Dj Ahneig Make: Transfluid Type: DB630 A3 CNC Control: ESA TOUCH PANEL Year: 2008 Max.Tube Ø: 30mm Min. Tube Ø: 4mm Max. Wall thickness:4mm Max. Bending radius:180mm Min. Bending radius:10mm Max. bending length:4000mm 3e dimsion bending:Yesmm/min. Number of tools: 10,12,15,16,18,20,22,28 Length: 6000mm Width: 1800mm Height: 1800mm Weight: 3700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Folding Machine Eurofold 235 ST Item no. L1130 The folding machine has been serviced and is in excellent technical condition. A 3-month warranty applies to mechanical assemblies and parts. Ijdeya E Hbspfx Ahnjig

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. • Core processing machines: • HOMAG Optimat KFL 525 • Units: pre-milling, gluing, trimming, radius units, scrapers, polishing Iodpfxjzuhbie Ahnjig • HOMAG control with touchscreen/keyboard • Sensors for board thickness and edge material detection • Large blue safety windows • HOMAG Optimat KFL 526 • Continuing trimming and polishing stations • Manual service access with lift-up covers • Controls & electrics: • HOMAG electrical cabinet with main switch • PLC, fuses, control boards, voltage/current meters • Safety control panels (stop, reset, feed, emergency stop) • Condition: • Complete, physically connected line • Normal operational wear; no major damage visible • Full set of professional edge-banding aggregates installed Additional equipment • 2× Automatic loading systems: WEEKE OPTIMAT BST 500 D (2007) • Ser. no. 0–251–04–2756 (34 kW, 80 A) and 0–251–04–2755 (25 kW, 63 A) • Overhead gantry with vacuum lifting cups, automatic material alignment • Heavy-duty roller conveyor section • Transport/transfer system: HOMAG OPTIMAT TDL 310/25/12 (2007) • Ser. no. 0–205–10–1698 • Wide roller conveyor with safety guards • Cross-transfer and sorting sections • Integrated measuring and positioning units • Portal manipulator (stacker/unloader) • Overhead vacuum pick-and-place unit (orange) • Linear guiding with chain drive, dedicated motor drive • Automatic lifting and stacking of finished panels • Extraction/filtration • Strong industrial dust extraction along full line (yellow flexible hoses + metallic ducts) • Safety guarding • Complete set of safety guards across the line

Condition: used, Year of construction: 2009, sheet width 3100 mm plate thickness / mm distance between columns / mm Swivelling bending machine 3100SK Folding bench Sheet metal bending machine Folding bench Iiodewbi Itspfx Ahnjg

Condition: used, Year of construction: 2007, The Heidelberg Stahlfolder TH 82/6-4-2 - RFH, manufactured in 2007, is a high-quality folding machine with a size of 820 mm. Currently dismantled and located in Germany, this machine features a rotary feeder RFH-82. It includes three stations: the first station has 6 folding pockets of 82 cm with automatic pocket setting, the second station has 4 folding pockets of 66 cm with automatic pocket setting, and the third station has 2 folding pockets of 56 cm with automatic pocket setting. The machine also includes a stacking delivery SBP 66, a touchscreen monitor, and an MCT control system. The specific model is identified as TH82/6/4/2 with the machine number FH.HACO-00951. Format: 820 mm Equipment: Rotary feeder RFH-82 1.station: 6 folding pockets 82 cm Automatic pocket setting 2.station: 4 folding pockets 66 cm automatic pocket setting 3.station: 2 folding pockets 56 cm Automatic pocket setting Stacking delivery SBP-46+ MKE+VE Iisdpfjwnft Sox Ahnsg Touchscreen-Monitor, MCT-control-system

Condition: used, Year of construction: 2006, The Heidelberg Stahlfolder Ti 40/4-SAK is a compact and efficient folding machine designed for small to medium-sized print shops. It has 4 pockets and an SAK stream delivery system Iiodpfxewcqxve Ahnog Format: 400 x 650 mm Equipment: Feeder Feeder Mode: Flat pile feeder Type: FI-40 Control Unit: DCT 500 Folding Units 1st unit Type: Ti-40 Year: 2004 Pockets: 4 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Noise Protection Hood Serial number: FH.FANF-00226 Delivery Delivery mode: Shingle delivery Technical Details Sheet size max: 400 x 650 mm Sheet size min: 80 x 100 mm Max. mechanical speed: 180 m/min.

Condition: used, Year of construction: 2011, Booklet Size (min./max.): 105 x 210 mm to 325 x 450 mm Booklet Thickness: Max. 25 sheets (80 gsm) or up to 5 mm Isdpfx Ahsziix Sonjig Max Speed: Up to 2,000 booklets per hour Stapling Options: Flat or loop (ring) staples Stapling Heads: Up to 4 heads can be used on 6 positions (2 standard) Power Supply: 220 V, 10 A Dimensions (H x W x D): 86 cm x 103 cm x 71 cm Net Weight: 240 kg Format: 325 x 450 mm Equipment: regular and optional eyelet sewing (standard staples, cheap to use)Stitching Heads: adjustable heads possibility to turn off sewing or folding (this allows, for example, sewing only) triggering from a button or a photocell counter of copies made lateral and frontal alignment indicator light indicating lack of staples SRA3 format Supports non-standard formats.

Condition: used, Year of construction: 2009, Format: 660 x 1040 mm Equipment: Feeder: Feeder Mode: Palet feeder Type: PFH-66 Control Unit: MCT control panel Air Stream Table Folding Units: 1st unit Type: BCUH-66 Year: 2009 Isdpsy Tacrofx Ahnsig Pockets: 4x Pocket Type: Combi folding plates Pocket Configuration: manual setting Rollers Configuration: manual setting Roller condition: used condition Cross fold unit with 2x knives Second Knife aligned to: Left & right Noise Protection Hood Monitor Screen Delivery: Delivery mode: Horizontal stack press delivery Type: SBP-M 46.D Technical Details: Sheet size max: 660 x 1,040 mm Pallet feeder max capacity: 800 mm height Sheet size min: 140 x 180 mm Max. mechanical speed: 200 / 230 m/min

Condition: used, Year of construction: 1989, Format: 350 x 500 mm Iisdpsyzrucjfx Ahnjg

Condition: used, Format: Equipment: Speed: 4,300 cycles per hour Fold types: Letter, Single Fold, Zigzag Fold, Doub Job Memories: 20 Folding Capacity: 8 Sheets Document Feeder Capacity: 325 Sheets Maxi Feeder: 1,200 Sheets Envelope Capacity Hopper: 500 Envelopes Envelope Capacity Side Exit: 500 Envelopes Envelope Capacity Power Stacker: 500 Envelopes Iisdpfxex N Ng Eo Ahneg Set Thickness: 2.5mm Reverse Reading: Yes Cascade Feeding from all Feeders: Yes High Capacity Power Stacker: Yes Dimensions: Depth: 460mm, Height: 920mm, Length: 1 Dimensions: Weight: 140 Kg (6 Stations)

Condition: used, Format: 310 x 432mm Equipment: roller adjustment: fully automatic model: flat pile feeder with air-suction type of fold: single fold, parallel fold, short fold, letter fold, according fold, gate fold sheet size: Iiodpfex N I Uhex Ahnsg max. 310x432mm; min. 125x130mm paper weight: 50-190g/sqm pile height: 50mm speed: max. 240 sheets/min. power: 230V/50Hz - 0,6kW dimensions: 1.060x553x670mm weight: 45kg

Condition: used, The Stahl T 52.3T/4-F-KB is a high-performance folder-gluer currently in operation at a printshop in Germany. Designed for efficiency and precision, this machine is equipped with four buckle plates and one knife, making it ideal for a wide range of folding and gluing applications. With a 520 mm working width, the T 52.3T/4-F-KB handles various box and carton formats, ensuring versatility for packaging production. The integrated flat pile feeder streamlines material handling, improving workflow and productivity. This folder-gluer is a reliable solution for businesses seeking consistent, high-quality finishing. Format: 520 mm Equipment: 4 buckle plates Iedpfx Ajxmi Emohnsig 1 Knife Flat pile feeder

Condition: used, The Horizon AFC-502 folding machine, serial number 23027, is a versatile solution for professional folding applications. Currently dismantled and located in Germany, it is designed to handle a wide range of formats with precision and efficiency. This model offers 2 parallel folds and 1 cross fold, supported by a suction head with rotary feeder for smooth and reliable sheet handling. It accommodates sheet widths up to 500 mm (minimum 105 mm) and lengths up to 648 mm (minimum 174 mm). Cross folding is possible from 182 mm to 500 mm, while perforation can be performed on sheets ranging from 105 mm to 500 mm in width. Performance highlights: Folding capacity: 2 parallel folds + 1 cross fold Sheet width: 105 ??? 500 mm Isdpjw U Dtvjfx Ahnoig Sheet length: 174 ??? 648 mm Cross folding: 182 ??? 500 mm Perforation width: 105 ??? 500 mm Speed: up to 180 m/min Compact and efficient, the Horizon AFC-502 is well-suited for printshops requiring reliable folding performance across a variety of formats. Format: 500 mm Equipment: 2 parallel fold 1 cross fold Sheet width: max: 500mm,min: 105mm, Cross folding: max: 500mm, min: 182mm, Perforation: max: 500mm, min: 105mm, sheet length: max. 648mm, min.174mm. Speed max. 180 m/min., suction head w ith a rotary feeder

Condition: used, The Horizon AFC-544 AKT is a versatile cross folder currently in operation at a printshop in Germany. Designed for sheet sizes up to 540 x 760 mm (minimum 120 x 172 mm), it combines efficiency with flexibility for a wide range of folding applications. The machine features 4 buckles with knife in the first folding unit and 2 buckles in the second unit, supported by a fully automatic knife for precise folding. Equipped with Zolltouch & work Zoll technology, it offers intuitive operation and includes 17 standard folding types preprogrammed, along with memory capacity for 200 repeat jobs. Capable of handling paper weights from 40 to 250 g/qm2, it delivers a maximum speed of 40,000 cycles per hour. Additional specifications include: Iodpow Upqmsfx Ahnoig Fold length: minimum 58 mm (1st buckle), 35 mm (other buckles) Pile height: 650 mm Power: 400V / 50Hz ??? 2.5 kW Dimensions: 2,700 x 1,050 x 1,650 mm Weight: 1,050 kg (without conveyor) This machine offers a compact, high-performance solution for professional folding needs, combining automation, memory functions, and robust engineering. Format: 540 x 760 mm Equipment: 4-buckles cross folder Parallel fold Crossfold Technology: touch & work Memory folding types: 17 standard-typs of fold preprogrammed - Saveable jobs: 200 memories for repeat orders 1.folding unit: 4 buckles + knife 2.folding unit: 2 buckles Knife: full automatic Sheet size:max. 540x760mm; min. 120x172mm - Fold length:1. buckle: min. 58mm all other buckles: min. 35mm Paper weight: 40-250g/sqm Pile height: 650mm Speed: max. 40.000 cycles/h Power: 400V/50Hz - 2,5kW Dimensions: 2.700x1.050x1.650mm Weight: 1.050kg (without conveyor)

Condition: used, Year of construction: 2001, The Mathias Baeuerle CAS 52-B is a sophisticated and efficient folding machine designed for precise and automated folding tasks. Manufactured in 2001, this machine is currently in stock and located in Germany. It features four plates in the first unit and automatic fold plate setting, ensuring accurate and consistent folding. The CAS 52-B is equipped with automatic paper thickness measurement, a control panel with seven pre-programmed standard folds, and electrical double-sheet control to prevent errors. It includes a flat pile feeder for smooth material handling and a MB CAS 52 Multimaster computer-controlled folder, which allows for precise and repeatable folding operations. With a memory capacity for 60 repetitive jobs, the machine can efficiently handle high-volume tasks. The CAS 52-B also features semi-automatic fold roller setting and mobile delivery, enhancing its versatility and ease of use. It can accommodate materials with a size of 520 x 850 mm. Format: 520 x 850 mm Equipment: Isdpfx Ahjwdww Usnoig 4 Plates 1st Unit Automatic Fold Plate Setting Automatic Paper Thickness Measurement Control Panel 7 Pre-programmed Standard Folds Electrical double-sheet- control Flat pile feeder MB CAS 52 Multimaster Computer Controlled Folder Memory for 60 Repetitive Jobs Mobile delivery Semi Automatic Fold Roller Setting

Condition: used, Year of construction: 2010, The Horizon AFC 566 FKT + PST-40 folding machine, manufactured in 2016, is a high-performance solution for efficient and precise folding operations. Currently in production and located in Germany, this machine is designed to handle a wide range of sheet sizes, from a minimum of 60 x 64 mm to a maximum of 558 x 850 mm, with a maximum mechanical speed of 240 m/min (30,000 cycles/h). Equipped with a flat pile feeder capable of handling a maximum pile height of 740 mm, it ensures continuous and efficient paper feeding. The primary folding unit is an AFC-566 FKT with 6 combi folding plates, offering manual pocket and roller configuration. It features a used condition roller and a cross fold unit with 1 knife, providing versatile folding options with a maximum working width of 558 mm and a maximum fold length of 850 mm. The machine also includes a noise protection hood and touch screen control for ease of operation. The delivery mode is a PST-40 press delivery, manufactured in 2010 with the serial number 360003. It has a maximum working width of 440 mm and a pressing force of 20,000 N, ensuring efficient and organized output handling. This machine is well-suited for businesses seeking to enhance their folding capabilities with a reliable and high-performance solution. Format: 440 x 310 mm Equipment: Feeder Feeder Mode: Flat pile feeder Max. pile height: 740 mm Iodpfx Aewcqw Sjhneig Folding Units 1st unit Type: AFC-566 FKT Pockets: 6 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Working width max: 558 mm Fold length max: 850 mm Cross fold unit with 1x knife Noise Protection Hood Touch Screen Control Delivery Delivery mode: PST-40 Type: Press delivery Year: 2010 Serial number: 360003 Working width max: 440 mm Technical Details Sheet size max: 440 x 310 mm Sheet size min: 60 x 64 mm Infeed height min: 280 mm Mechanical speed max: 240 m/min Pressing force: 20,000 N Built-in controller Technical details: Sheet size max: 558 x 850 mm Sheet size min: 128 x 148 mm Max. mechanical speed: 240 m/min Max. mechanical speed (cycles): 30,000 cycles/h

Condition: used, Year of construction: 1988, The Stahl T49/4.KB-F.2, manufactured in 1988, is a machine equipped with four pockets and a flat stack feeder. It features a single cross-cutting unit, enhancing its functionality. This model has a format of 490 mm and is currently located in Germany, available in the Printshop. Format: 490 mm Equipment: 4 buckle plates 1 Knife vertical pile feeder Isdpov Di Sxefx Ahnoig

Condition: used, Year of construction: 1994, The Mathias Baeuerle CAS 524 SE, manufactured in 1994, is a machine equipped with four pockets and a flat stack feeder. It features a single cross-cutting unit, enhancing its functionality. This model has a format of 520 x 720 mm and is currently located in Germany, available in storage. Format: 520 x 720 mm Iijdpfxov Di Srj Ahnsg Equipment: 4 buckle plates vertical pile feeder 1 Knife