Used Hygiene for sale (610)

Condition: reconditioned (used), Year of construction: 2016, Sanitary gate for hand disinfection Automatic hand disinfection station with a turnstile. The turnstile automatically dispenses disinfectant onto the hands. It is activated touchlessly using photocells. The sanitary gate is made of high-grade stainless steel 1.4301 and performs the following functions: Hand disinfection One-way traffic control Technical data: Material: Stainless steel 1.4301 Dimensions: 860 x 860 mm (W x D) Weight: 40 kg Bdsdpfjzvrrbjx Abtsg Power supply: 230 V Designed for hand disinfection Disinfectant spray activated touchlessly using photocells Equipped with a turnstile that allows passage only after the required actions have been performed. Light signaling (red-green) High throughput In the event of a power failure, the turnstile rotates freely in both directions – in compliance with occupational safety regulations. Video showing how it works:

Year of construction: 2025, condition: excellent (used), 2025 heavy duty stationery hot water pressure wash system. Recently removed from a closed food factory, they had several of these outside the main building to wash separate areas of the factory. 175 bar pressure, 1,260 litres per hour max flow. 8.2Kw motor and 115 Kw boiler. Frost protected to -20 degrees C. This is the newest one which was only used for a short time, we also have two from 2017 and 2019 both in nice condition. Bdedpjzt N R Njfx Abtog

Condition: new, Measuring range 0 to 60 bar relative, absolute Accuracy (linearity) 0.1 to 0.15 % Output 1x PNP switching output, 2x PNP switching output, 1x PNP switching output, and 1x analog output) (either: 0(4) to 20 mA, 0 to 10 V) Bdsdoh Rul Tepfx Abtsg Special features Programmable, switching output, measuring range scaling 1:4, selectable measuring unit, housing and process connection made of stainless steel (316L) Process connection Thread, hygienic connections, diaphragm seals, JUMO PEKA Medium temperature -25 to +200 °C

Year of construction: 2026, operating hours: 24 h, condition: new, Equipment: CE marking, Shoe soles are only roughly cleaned w􀇕th a dry curly hyg􀇕ene mop. For hand d􀇕s􀇕nfect􀇕on, two hands are s􀇕multaneously 􀇕nserted 􀇕nto two separate chambers on the front of the mach􀇕ne, and the solut􀇕on 􀇕s sprayed as soon as the hands are detected by the sensors. There are Red/Green LED warn􀇕ng l􀇕ghts that 􀇕nd􀇕cate that the process has been completed and completed. After the person's hand d􀇕s􀇕nfect􀇕on process, he/she 􀇕s g􀇕ven perm􀇕ss􀇕on to pass through the turnst􀇕le. Dry curly mop for clean􀇕ng shoe soles and d􀇕s􀇕nfect􀇕on of hands are carr􀇕ed out together. IT IS MANUFACTURED FROM 304 CR STAINLESS MATERIAL. A HYGIENE MAT IS AVAILABLE. The Hyg􀇕ene Mat can be eas􀇕ly replaced 􀇕f des􀇕red. It prov􀇕des hyg􀇕ene qu􀇕ckly and e􀇖􀇕c􀇕ently 􀇕n any locat􀇕on needed 􀇕n the fac􀇕l􀇕ty. It 􀇕s eas􀇕ly portable and can be 􀇕nstalled anywhere. A mandatory hand d􀇕s􀇕nfect􀇕on 􀇕s prov􀇕ded for two hands s􀇕multaneously, and the hand d􀇕s􀇕nfect􀇕on t􀇕me can be adjusted. It does not allow one-handed passage. There 􀇕s an adjustable turnst􀇕le lock accord􀇕ng to ex􀇕t d􀇕rect􀇕on and preference, and the turnst􀇕le durat􀇕on can be adjusted. Approx􀇕mate d􀇕mens􀇕ons 86.5 cm (length) x 60 CM (w􀇕dth) x140 CM (he􀇕ght) 304 CR Sta􀇕nless Steel ra􀇕l􀇕ng 􀇕s ava􀇕lable. FREE PASSAGE WHEN THERE IS NO ELECTRICITY. There are he􀇕ght adjustable legs. There 􀇕s a sta􀇕nless carry􀇕ng plate for d􀇕s􀇕nfectant can􀇕sters on one s􀇕de of the dev􀇕ce. Bdedpfxezg A Eme Abtsg IT OPERATES WITH 220 V ELECTRICITY

Year of construction: 2026, operating hours: 24 h, condition: new, functionality: fully functional, Equipment: CE marking, It 􀇕s made of 304 Cr N􀇕” quality material. It 􀇕s used 􀇕in food product􀇕on areas. Bjdpfjzg A Afox Abtedg W􀇕dth: 155 cm - Height: 125 cm Depth: 100 cm

Year of construction: 2026, operating hours: 24 h, condition: new, functionality: fully functional, Equipment: CE marking, THANKS TO HORIZONTAL AND VERTICAL BRUSHES, IT PERFORMS BRUSHING AND CLEANING OF BOOTS AND BOOT SOLES. BRUSHES ARE EASY TO INSTALL AND DISMOVE. EASY PLC CONTROL SYSTEM IS AVAILABLE. THERE IS A TIME-ADJUSTED SYSTEM IN THE PASSAGE SYSTEM (IT IS POSSIBLE TO SET THE TIME OF THE BRUSH, SENSOR SINK AND DOUBLE HAND DISINFECTANT SYSTEM). Bdjdpszg Aznefx Abtog THERE IS NO PASSAGE PERMIT WHEN THE PERSONNEL JUMPS THE QUEUE. (THE QUEUE SYSTEM IS REQUIRED TO DO SOLE SCRUBBING, HAND WASHING, AND TWO-HAND DISINFECTANT.) IT HAS A TWO-DIRECTION FREE PASSAGE FEATURE IN CASE OF A POWER CUT. COMPLETE CHROME STAINLESS SENSOR SINK DOUBLE HAND DISINFECTANT HORIZONTAL BRUSH HYGIENE MAT MANUAL SOAP DISPENSER Z NAPKIN HOLDER AVAILABLE. OPTIONAL SELECTION (SENSOR SOAP DISPENSER, SHOES SHELTER JET DRYING ETC)

Condition: used, ITEC Star Clean 23871 is a professional hygiene station designed to control personnel access to production areas in the food processing industry. The system provides automatic cleaning and disinfection of footwear, ensuring high hygiene standards before entering production zones. The unit uses rotating brushes to effectively clean and disinfect the soles and sides of footwear during passage. Automatic sensor activation ensures simple, safe, and hands-free operation. Constructed from high-grade stainless steel, the station offers durability and reliable performance in demanding industrial environments. It is ideal for food processing, meat, dairy, and pharmaceutical facilities where strict hygiene standards are required. Technical Specifications Manufacturer: ITEC Hygiene / Frontmatec Bdsdpezgqvaofx Abtog Model: Star Clean 23871 Type: Footwear Cleaning and Disinfection Station Material: Stainless Steel (Inox) Power Supply: 400 V, 3N/PE, 50–60 Hz Power Consumption: 0.75–1.25 kW Water Connection: 3/4” Throughput: 5–7 persons per minute Activation: Automatic sensor operation Application: Food, meat, dairy, and pharmaceutical industries

Condition: new, APV Centrifugal Pump WI+ 35/35-220, Stainless Steel Hygienic Pump Bdedpfxjzb Nmno Abtsg New APV hygienic pump from the WI+ series, available from stock, for hygienic conveying processes in the food, beverage, dairy, and pharmaceutical industries. Manufacturer: APV Type: WI+ 35/35-220 Product Type: Hygienic stainless steel centrifugal pump Year of Manufacture: 1996 Condition: New Old Stock (NOS) Pump Design: Single-stage centrifugal pump Material of parts in contact with the product: Stainless steel Hygienic Design: Yes Connection Type: Hygienic threaded connections Inlet Connection: Stainless steel threaded connection Outlet Connection: Stainless steel threaded connection Rotation Direction: Indicated on the pump housing Motor Manufacturer: ABB Motor Design: Three-phase asynchronous motor Mounting Type: Foot-mounted Pump-Motor Unit: Directly coupled Application Area: Food industry, beverage industry, dairies, pharmaceutical industry, process industry

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: C115101, Four CSF Inox (Italy) hygienic centrifugal pumps, year 2021, professionally decommissioned from an INEOS production facility by qualified engineers. In service for under 12 months — excellent, near-new condition. Four pumps available across three models: 1 x CS 32-110-2-1/BD — 0.75 kW, 1–12 m³/h at 1.6 bar, 1.5" tri-clamp 2 x CS 32-145-2-1.5/BD — 1.1 kW, 1–13 m³/h at 2 bar, 1.5" tri-clamp 1 x CS 50-175-2-10/BD — 7.5 kW, 1–54 m³/h at 4.1 bar, 2.5" inlet / 2" outlet tri-clamp All units: 316L stainless steel, 6-vane open impeller, EHEDG/3A hygienic design. ATEX pump II 3G Ex h IIB T4...T3 Gc with Orange1 Ex db IIC T4 Gb flameproof motors, IP66, inverter duty. Suitable for solvent, fragrance, cosmetics, food, beverage and pharmaceutical duties in hazardous areas. Available individually or as a set. Tracht Ltd supplies hygienic and sanitary process equipment. Viewings by appointment; collection and delivery can be arranged. Sold EXW Manchester, UK. Price on request. Please send an enquiry for individual quotes or a package price for the full set — we respond quickly. Bedpfozmt Ufjx Abtodg

Condition: used, Year of construction: 2011, Additional title: Booster station with chemical dosing pumps Bjdpfxoxbqpij Abtjdg Position: standing on frame with protective screen Features: Centrifugal pump (Grundfos), 1 pressure sensor, 4 diaphragm metering pumps with PVDF dosing head and microprocessor control, 4 Flow Control PVDF for diaphragm dosing pump, 4 impinges, inductive flow meter (Endress + Hauser)

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, ITEC & Bobet Hygiene Gateways – Components – Custom Configurations Available from Stock. Complete solutions without the costs and long lead times of new equipment. HUVANTIS exclusively offers premium, tested hygiene infrastructure from stock clearance by industry leaders ITEC and Bobet Matériel. Why HUVANTIS? Significant Savings: A single ITEC turnstile with disinfection system currently sells for over €8,000 (new price). We offer complete systems at a fraction of this price. Immediately Available: No months-long delivery times. Available directly from stock in Büllingen (BE) / Auw (DE). Planning Included: We don’t just supply hardware. We also offer CAD-based planning for your hygiene passage (personnel flow analysis, black/white zone separation). CURRENTLY AVAILABLE CONFIGURATIONS: 1. Modular ITEC System (Configuration 1): ITEC continuous sole cleaner with turnstile Separate ITEC hand disinfection station with rotary gate ITEC touchless hand wash basin, soap dispenser & hand dryer Stainless steel guidance system (barriers & guides) Price: €3,150 net (plus VAT) 2. Compact Bobet Combo System (Configuration 2): Bobet continuous sole cleaner with integrated disinfection & turnstile ITEC hand wash basin (2 touchless taps) ITEC soap dispenser & hand dryer Stainless steel guidance system Price: €2,850 net (plus VAT) ADDITIONAL SERVICE: Custom CAD planning & consultation for your site: €800 flat fee. LOGISTICS & TERMS: Location: B-4760 Büllingen (BE) / D-54597 Auw (DE) Shipping: Europe-wide delivery by freight forwarding available on request Invoice: Official invoice with separate VAT (BE-VAT) Condition: Used, technically inspected, sold “as is” A detailed 4-page dossier with technical drawings and a list of individual components is immediately available as a PDF upon request. Bodpfx Ajy N T Rhsbtsdg

Condition: good (used), functionality: fully functional, Offered is a hygiene sluice/disinfection sluice by Blue Level DLSO 2000. 400V, 16A. Complete V2A stainless steel construction. New brush rollers. Dimensions (L x W x H): 273x95x177 cm. Immediately ready for use, fully operational. Further information upon request. Payment in cash or advance payment. Sale only to commercial customers. No warranty or guarantee. Bodpfx Aeynkh Tjbtedg

Condition: used, Dimensions: 800 x 750 x 1975 mm Washing chamber: 500 x 650 x 625 mm Bdodjb Tffgjpfx Abtsg

Condition: used, mileage: 57,470 km, power: 96 kW (130.52 HP), first registration: 09/2020, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total width: 2,032 mm, total height: 1,974 mm, loading space length: 2,311 mm, loading space width: 1,352 mm, loading space height: 1,650 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1396. LD79197 ----EQUIPMENT - Exterior mirrors, electrically adjustable, heated, and foldable - Rear double wing doors, 180° opening - Seats: Seat Package 13 - Power inverter 230V/150 Watt - 6-speed gearbox - Electronic ABS with EBD - Driver airbag - Exterior mirrors, electrically adjustable and heated - On-board computer - Flat roof - Headliner in driver's cab - Rear double wing doors, 180° (without windows) - Tachometer - Electronic safety and stability system - Power windows Bodpfxsyxiydj Abtodg - Ford Easy Fuel - FordPass Connect - Cruise control, leather steering wheel - Lockable glove compartment with lid - Interior lighting with delay switch-off - Front air conditioning - Paint finish: solid color - Cargo area lighting - Cargo area floor: vinyl floor covering - Adjustable steering column - Emergency brake assist including emergency brake light - Package: Style color package - Park pilot system front and rear - Fog lights - Particulate filter: diesel particulate filter - Radio: Audio system 13 with DAB+ - Headlights: low beam/daytime running lights - Sliding door entry lighting, automatic - Sliding door: right side - Mud flaps front and rear - Side protection moldings - Low sidewall cladding - Power steering - Seat belts - Start-stop system - Power socket: 12-volt outlet - Front bumper in body color - Immobilizer - Heat-insulating, lightly tinted glazing - Central locking with remote control - Additional electric heater ... and much more. ----The vehicle is offered in unprepared/as-is condition! Nationwide delivery available for an additional charge. Errors and prior sale reserved. We are happy to consider your vehicle as a trade-in. Financing / leasing available with or without down payment! Still have questions? We are happy to assist you!

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: RF5060-5-2021, Year of construction: 2021, Bradman Lake SL80 Semi-Automatic End-Load Cartoner • Speed: up to 80 cartons per minute • Carton Size Range: A 50–254 mm | B 19–100 mm | C 130–305 mm • Feed: manual loading area for 2 operators • Glue System: Nordson ProBlue 4 hot-melt unit • Construction: stainless steel frame & panels, hygienic design, CE compliant Bodpfx Absxqmmpetjdg • Vacuum Pump: Busch • Features: SIKO digital readouts, inverter drive, castors for mobility

Condition: used, Year of construction: 2004, machine/vehicle number: LC277, Technical Specifications & Performance Data Year 2004 complete PET line, 6000 bottles/hour, isobaric filling. This used configuration from BAT, Kosme, M.A.S is set up for soft drinks and remains in storage. As a compact piece of soft drinks bottling machinery, it covers blow molding through end-of-line packaging. Bottle Formats: 1.5 L, 2 L, 1 L Container Types: PET Product Types: Soft Drinks Speed: 6000 bph Filling: Isobaric (Fill type: 5) Production Year: 2004 Current Status: In Storage Line Composition Blow Molding Machine: Kosme KSB 4 (2004) Premix: M.A.S Mixer (2004) Filling Monoblock: M.A.S 32/32/8 (1999) Labeling Machine: BAT EBI 07 (2006) Shrink Wrapper: BAT 12 packages/min (2005) Advanced Automation & Control Systems Integrated controls coordinate blow molding, premix, isobaric filling/capping, labeling, and shrink wrapping for stable throughput at 6000 bph. Automation supports precise fill control and consistent handling across the listed PET formats. Manuals are available to assist setup and troubleshooting. Electrical configuration suits standard industrial supply environments. Production Line Integration Capabilities The line is engineered for straightforward integration into existing utilities and conveyors. Format changes between 1.5 L, 2 L, 1 L are supported, enabling quick PET size switches while maintaining carbonated-beverage performance parameters. Interfaces between blow molder, premix, and the 32/32/8 monoblock streamline upstream and downstream connections. Machine Condition & Maintenance History The equipment is currently stored and prepared for redeployment. As a second-hand system, it shows a solid operating background; regular upkeep records support readiness with appropriate commissioning and maintenance. Operational Performance & Versatility Configured for soft drinks, the isobaric setup maintains product carbonation and fill accuracy across the specified PET formats. This used soft drinks bottling machinery provides consistent performance from container manufacture to final packaging within the stated speed class. Bsdpfx Aevguyaebtsdg Installation Requirements & Site Preparation Allocate sufficient footprint for blow molding, processing, filling, labeling, and packaging sections. Utility tie-ins (air, power, water, CO₂ where applicable) are arranged for rapid connection to minimize commissioning time. Safety Standards & Compliance Certification Machine guarding and safety interlocks support operator protection and hygienic handling in beverage applications. Protections are in place for routine operation and maintenance access.

Condition: used, maximum load weight: 1,500 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 10/2023, total width: 2,090 mm, total height: 1,980 mm, Errors and prior sale excepted! Internal number: 1411. AAA0483 ----EQUIPMENT * Sales vehicle Bodpfx Abozfdm Njtjdg * Stainless steel cladding * Sales hatch on the left * Sales counter in stainless steel * Accessory shelf * Hygiene package with double sink * Hot water boiler with cold water pump * Deep fryer with 2 baskets * Bain-marie BMH160 * Storage refrigerator * Refrigerated table with 6 drawers * Refrigerated counter top * 2x extractor hood * LED counter and ceiling lights * Overrun brake system * Supports at the front and rear * Support wheel * Compartment for 2 gas cylinders ... and more ----The vehicle is in original condition! Nationwide delivery possible for an additional charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Year of construction: 2014, condition: good (used), Used SEALPAC RE25 Thermoforming Packaging Machine (MAP/Vacuum) This SEALPAC RE25 thermoforming machine is a high-quality, industrial-grade packaging system designed for continuous operation in food production environments. Built in the Netherlands, SEALPAC machines are known for their durability, hygiene, and consistent sealing performance. This unit is in good used condition Technical Overview Model: RE25 Power: 3-phase (230/400V, 50–60 Hz) Bjdpeyvr Irofx Abtjdg Power consumption: ~17 kW Compressed air: 6–7 bar Gas (MAP): 4–6 bar Film width: approx. 300–650 mm Max forming depth: up to 160 mm Machine length: approx. 8 m. Contact Us Get in touch for: Price Inspection Additional details or videos

Condition: used, machine/vehicle number: 2020110210, mileage: 92,300 km, power: 100 kW (135.96 HP), first registration: 12/2011, fuel type: diesel, empty load weight: 3,065 kg, maximum load weight: 435 kg, overall weight: 3,500 kg, wheelbase: 3,665 mm, fuel: diesel, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, loading space length: 3,500 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), onboard computer, second-hand vehicle warranty, We offer you customized, lightweight box bodies for new or used low-frame chassis in various body lengths. The body and interior fittings are always individually adapted to your specific needs, from function to design. We manufacture ourselves and in Germany. Our many years of experience and our comprehensive service offer you a great deal of flexibility in implementing your idea. Each project has its own ID with us. VW Crafter 2.0l 2011 Euro5 3500 kg First registration: 21.12.2011 Mileage: 92,300 km Fuel: Diesel kW/PS: 100/136 Manual transmission, 6 gears ccm: 1,968 cm³ The sales body is NEW, unused and features a large sales flap across the entire vehicle width, 2 seats, driver's license class B, rear step, LED lights, reversing camera. Box body made of 25 mm GRP sandwich panels, superlight, with an alcove. Rear door, single-leaf, 700 x 2000 mm. Floor made of non-slip industrial flooring R11. Exterior lighting: LED, in accordance with the Road Traffic Act and EU regulations. Interior dimensions LWH: 3800 x 2250 x 2300 mm Side flap WxH: 3570 x 1480 mm Permissible total weight: 3,500 kg Bsdpef D Rdtjfx Abtjdg Unladen weight: 3,065 kg Interior fittings are NEW!! Left side: Commercial refrigerator with glass door and forced air cooling Base cabinet for countertop appliances with sliding door, 2-burner gas stove 8.5 kW, smooth gas griddle 8 kW, double gas fryer 2 x 8 L 12.5 kW, electric bain-marie 2 kW, wall-mounted hood 2200 incl. extraction, grease drain, flame protection filter, heat protection panel and lighting, gas cylinder cabinet for 4 x 11 kg, pressure regulator, gas line and gas inspection. Right side: Serving table with sliding doors and stainless steel worktop, cash register station 900 with folding cover, 254 L double sink with storage including fresh and wastewater tank, boiler Chalkboard with wooden frame, LED illuminated Additional equipment: Storage space above the sales flap, folding bag storage at the sales opening. 2 LED panels on the ceiling and 3 LED spotlights above the sales counter, dimmable. Plenty of storage space. Standard electrical installation 380 volts/16A, connection socket according to CEE standard, RCD circuit breaker, 16 amp fuse with inspection, 5 double sockets, hygiene package, fire protection package. Price net: 63,920.00 € plus 19% VAT Errors and prior sale excepted.

Condition: good (used), Year of construction: 2010, The Poly-Clip FCA 160 double clipper is a professional machine for closing artificial and natural casings in the meat and food industry. Manufactured by the renowned manufacturer Poly-Clip System GmbH & Co. KG, it is characterized by reliability, solid construction, and high performance. Bdedpfx Aew Swqiobteg The machine is designed for continuous operation in production facilities, ensuring fast and precise closure of calibers while maintaining the highest standards of hygiene. Technical specifications: Manufacturer: Poly-Clip System GmbH & Co. KG Model: FCA 160 Power: 4.0 kW Power supply: 3x400V, 50/60Hz Current consumption: 6.0A Operating pressure: 5–7 bar Weight: 625 kg Machine dimensions: 150 × 120 × 190 cm Clip counter: 46841 Manufactured in: Germany Additional equipment: Work table Set of spare parts Advantages of the Poly-Clip FCA 160 clipping machine: Solid and reliable design. Precise and fast closing of casings. Easy to use and highly ergonomic. Suitable for intensive use in industrial conditions. The set includes additional equipment for immediate implementation in production. The Poly-Clip FCA 160 clipping machine is a proven solution for meat and food processing plants where quality, efficiency, and durability are important.

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Complete meat grinding set The set on offer is a complete meat grinding station built around the NOMA NOWICKI W-130 AL angle grinder, manufactured in 2025. Besides the grinder itself, the set includes a W-130 column bin lift that makes it easy to load raw material directly from bins into the machine’s throat, W-130 tool trolleys, a complete set of sieves/plates, and spare parts, making the offer a ready-to-use, self-contained production station. How does the NOMA NOWICKI W-130 AL grinder with bin lift work? Meat raw material is placed in a tool trolley, which is then raised by the column bin lift and tipped directly into the grinder’s feed hopper, eliminating manual carrying and lifting of heavy raw material. Inside the machine, raw material is moved by a feed screw to the cutting assembly, where knives and sieves/plates (selected according to the desired grind size) reduce it to a uniform structure ready for further processing — meat batters, stuffings, sausages, or burgers. The angle design of the W-130 AL grinder allows for a compact station layout and ergonomic operation, while its solid stainless and acid-resistant steel construction makes it easier to maintain a high hygiene standard. Key advantages of the NOMA NOWICKI W-130 AL set The column bin lift significantly streamlines raw material logistics at the station, reducing operator physical strain and shortening the time needed to load successive batches of meat. The addition of W-130 tool trolleys allows smooth movement of raw material between production stages, and the included set of sieves/plates enables quick changes to the grind size of the processed product without needing to purchase additional tooling. Manufactured in 2025, the set on offer is virtually new, and the included spare parts provide extra assurance of continuous station operation from the very first days of use. Technical specifications of the NOMA NOWICKI W-130 AL set NOMA NOWICKI W-130 AL grinder Bdjdpfx Aezxf Afobtjg Manufacturer: NOMA Nowicki Machinery Model: W-130 AL Serial number: 08025235 Year of manufacture: 2025 Powe: 13 kW in 1st gear, 20 kW in 2nd gear Power supply: 3 x 400 V / 50 Hz Grinder dimensions (L x W x H): 1650 x 1550 x 1670 mm Construction material: stainless and acid-resistant steel Compliance: CE, Made in EU Set components W-130 column bin lift – dimensions: 1150 x 1200 x 2850 mm W-130 tool trolleys Complete set of sieves/plates Spare parts Overall set dimensions (L x W x H): 2350 x 1750 x 2850 mm Application of the NOMA NOWICKI W-130 AL set The set is used in meat processing plants, butcheries, slaughterhouses, and facilities producing stuffings, sausages, burgers, and pâtés — wherever, in addition to the grinding itself, efficient logistics of feeding raw material into the machine matter. The column bin lift makes the station well suited to working with large batches of raw material delivered in transport containers.

Condition: good (used), functionality: fully functional, input voltage: 380 V, year of last overhaul: 2023, input frequency: 50 Hz, empty load weight: 960 kg, type of input current: three-phase, power: 1.15 kW (1.56 HP), Mixer with fixed stainless steel bowl, NN, older model, made in Italy, bowl capacity of up to 200 kg dough, maximum flour capacity of the bowl: 125 kg; maximum power through 1 ALFA MEC 100 motor of 700 rotations per minute, power 1.1 kW, 380V power supply but can also be adapted to 220 V (from the motor); ideal for pizza and bread dough, operation with relatively low noise, 2 speed levels, bowl operation in 2 possible directions, operating time adjustable on the main working direction with the help of a (functional) timer, functional emergency stop, metal frame /chassis cast, extremely stable, stainless steel safety cover, the cover is easy to open and close, the device stops after opening the safety cover (travel limiter), electrical connection: 3N/PE / N / PE 400V / 50 Hz The mixer is produced according to the hygiene and safety regulations in force. The machine complies with European food standards. Benefits simple operation, easy to clean, very resistant and durable, despite its age, it has little electronics and the mechanical part is robust, it can have a very long life. External dimensions W x H x H: mm x mm x mm NOTE: the machine has been overhauled on the electrical and mechanical side. Bdsdpfxera Ntro Abtog Sales price: 2.350 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 2001, input voltage: 380 V, Used mixer with fixed stainless steel bowl, DALMAR 50, MFG 2001, made in Hungary, serial No. 01D045 bowl capacity of up to 50 kg dough, maximum power 2.2 kW, ideal for pizza and bread dough, operation with relatively low noise, bowl operation in 2 possible directions, operating time adjustable on the main working direction with the help of a timer, the timer is not running, metal frame /chassis cast, extremely stable, stainless steel safety cover, the cover is easy to open and close, the device stops after opening the safety cover (travel limiter), electrical connection: 3N/PE / N / PE 400V / 50 Hz The mixer is produced according to the hygiene and safety regulations in force. Bsdpfx Asrb Dhqobtsdg The machine complies with European food standards. Benefits simple operation, easy to clean, very resistant and durable, despite its age, it has little electronics and the mechanical part is robust, it can have a very long life. External dimensions W x H x H: mm x mm x mm NOTE: the machine has been overhauled on the electrical and mechanical side. Sales price: 1.560 Euro + VAT, negotiable, FCA Oradea, Romania

Condition: used, machine/vehicle number: LC534, Used Isobaric Filling Line for Sparkling Wine 3000 bph The isobaric filling line for sparkling and semi-sparkling wine produces 3000 bottles per hour and handles 1.5-liter bottles along with a wide range of formats. The line operates smoothly, and you can inspect it before its decommissioning at the end of April. Every machine in the line includes safety features, and some technical manuals remain available. The bottle formats include Collio, Atmosfera, Astro, Lia, Cuvee, Spumante Italia, Flute, Campana, Extral, Tappo Raso, Emiliana, Bordolese, Borgognotta, Bordolese Nobile, and Borgognotta Alta. Moreover, the seller will supply format change parts along with the line. Additionally, conveyors ensure seamless and continuous movement between machines, optimizing the production process. Description of Main Machines Depalletizer TMG VEGA 60 (2008) In this Used filling line for sparkling wine the depalletizer automatically removes bottles from pallets using its integrated PLC and electronic protection barriers. Furthermore, its system includes a layer pad magazine and an automatic mechanism for removing pads and caps within the same cycle, ensuring efficiency. Rinsing Machine AVE RAI 12 (1999) The rinsing machine cleans the inside of bottles using its PLC system. It effectively removes particles and potential contaminants. As a result, the bottles are properly prepared for filling, which contributes to higher product quality. Ozone Dispenser The ozone dispenser sanitizes bottles before filling by producing ozone gas, a strong oxidizing agent. Not only does the gas eliminate bacteria, yeast, and microorganisms, but it also leaves no chemical residues, thereby guaranteeing high hygiene standards. Isobaric Filling Machine Cobert SUPREMA (1985) Bsdpfx Abevxz Alstjdg The isobaric filling machine fills bottles using 24 filling valves while controlling internal pressure. Consequently, it processes both still and sparkling wines, preserving their stability and quality. Capping Machine AROL (1997) The single-head capping machine applies flush and mushroom corks. As a result, it ensures airtight sealing, which preserves the wine’s flavors and properties over time. Capping Machine KOMPASS (2007) The capping machine applies screw caps (BVS, Stelvin) to bottles with precision. Furthermore, its design accommodates multiple formats and guarantees secure closures for different types of wines. Wirehooder ROBINO & GALANDRINO REKORD 10/2 (1994) The wirehooder automatically applies wire cages using its 10 plates and long-duration magazine. Because the machine loads cages from ground level, it allows uninterrupted operations without delays. Bottle Heating Tunnel COMTEC (2017) The heating tunnel stabilizes the temperature of bottles after filling by spraying them with warm water. Consequently, it helps reduce thermal shock and prevents potential damage to the bottles. Drying Tunnel CAMES TNN1 (2001) The drying tunnel blows high-efficiency air over the bottles, thoroughly drying them before they move to the next production step. Thus, this step ensures that the bottles are ready for labeling and packaging. Capsule Distribution and Application Capsule Distributor NORTAN (1997) The distributor feeds capsules continuously to the capsuling machine, thereby minimizing dow...

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: CD-2008II, FOR SALE: CD-2008II Two-Line Wet Wipe Machine (Unused / Like New) Bdedpfey Tkgzox Abtog We are offering a CD-2008II two-line wet wipe production machine in excellent condition. The machine has never been used in production, only tested, and is therefore in like-new condition. Key Features: • Double-line production (high efficiency) • Significantly faster than the standard CD-2008 model • Includes: folding, wetting, and cutting systems • Suitable for various wipe types (baby wipes, hygiene wipes, etc.) Condition: • Unused / test run only / zero production hours • Fully functional • Available for inspection or video demonstration Important: • Packaging unit NOT included (converting machine only) This is a great opportunity to purchase a near-new industrial machine at a significantly reduced price. 📍 Location: [Budapest, Hungary] 📦 Ready for immediate delivery Shipping and handling are the responsibility of the buyer. For more information, photos, or videos, please contact us.