Used Fruit Processing for sale (21,049)

Condition: used, General Overview Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the Hodpfoydh Agsx Aftefl jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Description Where necessary, refer to the drawings in Equipment Diagrams section 8. 9.1 Overview The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Condition: used, Year of construction: 2020, Temperature-controlled processing tanks are vital in various industries, including food, pharmaceuticals, and chemical manufacturing, where precise temperature management is essential for product quality and safety. Here’s a detailed overview of temperature-controlled processing tanks: What is a Temperature-Controlled Processing Tank? A temperature-controlled processing tank is a vessel designed to maintain a specific temperature range during the processing of materials. These tanks are equipped with heat exchange systems, temperature sensors, and control mechanisms that ensure the contents remain at the desired temperature throughout the processing cycle. Key Features - Heating and Cooling Systems: - Heaters: Can be electric or steam-based to raise the temperature of the contents. - Chillers: Usually water or glycol-based cooling systems to lower the temperature. - Insulation: Tanks often come with insulation to minimize heat loss or gain from external environments, maintaining stable internal conditions. - Temperature Control Systems: Sophisticated controllers and sensors (like thermocouples) monitor and adjust the temperature in real-time, providing precise control over the processing environment. - Mixing Mechanisms: Many temperature-controlled tanks have integrated mixers or agitators to ensure uniform temperature distribution throughout the contents. - Material Construction: Typically made from stainless steel or other materials that are resistant to corrosion and can withstand high temperatures. Applications in the Food Industry - Pasteurization: Heating milk and other liquids to kill bacteria while maintaining product quality. - Cooking: Precise temperature control during cooking processes (e.g., making sauces, soups, or jams) to ensure proper texture and flavor. - Fermentation: Regulating temperatures during fermentation processes (e.g., beer, yogurt) to ensure the right conditions for microbial activity. - Storage: Maintaining the quality of sensitive ingredients (like chocolate or dairy) by controlling temperatures to prevent spoilage. Advantages of Temperature-Controlled Processing Tanks Hodpfx Afsy E Hy Uotefl - Quality Assurance: Consistent temperatures lead to uniform product quality, flavor, and texture. - Safety: Helps in maintaining food safety standards by ensuring thorough cooking or pasteurization processes. - Energy Efficiency: Advanced control systems can optimize energy use, reducing operating costs. - Versatility: Suitable for various processes including heating, cooling, and maintaining temperatures for different food products. Considerations - Control Precision: The accuracy of temperature control systems is crucial; look for tanks with advanced control features for better reliability. - Cleaning: Ensure that the tank design allows for easy cleaning to comply with sanitation standards, especially in the food industry. - Integration: Consider how easily the tank can be integrated into existing processing lines and systems. High shear mixers are essential equipment in the food processing industry, particularly for emulsifying, blending, and homogeneously mixing ingredients with varying viscosity levels. Here’s an overview of how they work and their applications: What is a High Shear Mixer? A high shear mixer is designed to create high shear forces that thoroughly mix ingredients together. It typically consists of a rotor-stator assembly where the rotor rapidly spins, creating a vacuum that draws ingredients into the m...

Condition: used, Fish fillet washer Hsdpfx Afozzd Ewjtefl Make: Carnitech Model: 1635.20 Spray bars top and bottom

Condition: excellent (used), Year of construction: 2009, Salmon Slicer Hfsdpfx Afezzdmbstel Horizontal / Long Slice Make: Marel Model: HS240 2009

Condition: good (used), Direct from closed food factory - was used for frying Scotch Eggs. Dimensions to follow. Machine looks identical to Heat and Control HeatWave fryer so we think it was maybe manufactured under licence from Heat and Control. It can be supplied as a system comprising of a large double oil tank system for fresh and dirty oil and a Berief Drum Pre Filter. There is no top hold down belt on this machine. Hfodpfxjzmy Ais Aftol

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, High speed Flow wrapping machine direct from closed Scotch Egg factory, commonly used for wrapping pies, Scotch Eggs and other bakery products. Rare to find a recent manufactured machine, this is the newest one we have seen. Hsdezmy Avjpfx Aftjfl

Condition: used, Year of construction: 2011, Vemag DP 10 E filling machine. Hfsdpszg Nxmsfx Aftsl

Condition: used, sepqrator sepamatic 1200 Hjdpszgu Awjfx Aftjfl two sieves, 3mm and 5mm.

Condition: used, Industrial vacuum filler Vemag HP 15 E A reliable German powerhouse for medium-sized and large butcher shops. Ideal for the production of all types of sausages, frankfurters, pâtés, and processed meat products. Main advantages: Perfect product quality: The gentle conveying system protects the filling material, guarantees a clear cut, and prevents air inclusions. Highest weight accuracy: The precise servo drive portions to the gram, which minimizes raw material loss. Hsdpfx Afjzcazfetofl Versatile: Seamless synchronization with all common clipping machines (Poly-Clip, Alpina), cutting and forming lines. High performance: Processes even very firm and cold masses effortlessly with a filling pressure of up to 45 bar. Technical data at a glance: Filling capacity: up to 14,000 kg/h Portioning speed: up to 700 portions/min. Portioning range: from 5 g to 100 kg Hopper capacity: 250 / 350 liters Control: Vemag PC control (graphic display, program memory)

Year of construction: 2022, operating hours: 1,861 h, condition: excellent (used), functionality: fully functional, For sale is a Rösler wheel processing system, type FBA 24/2 Turbo. This system was specifically developed for the needs of professional wheel processing and, thanks to two laterally arranged unbalance motors, enables flawless results with short processing times. The stepless speed control and adjustable motor position allow the system to be flexibly adapted to almost any processing task. The compact wheel processing system is ideal for pre-grinding, fine-grinding, and polishing of standard and custom wheels up to 24 inches. Thanks to easy operation and quick abrasive change, wheels can be polished to a mirror finish in just a few hours – for a high-quality mirror finish in an elegant metallic look, both for used and new wheels. The pneumatic loading and unloading system makes loading and unloading the wheels very easy and quick. In addition to wheels, other components can also be processed here. Hedpfx Afezw A Rwstefl The working container is equipped with a flexible clamping device for different wheel types and is lined with a high-quality wear-resistant lining made of polyurethane elastomer (Rösler HD 90). The specially ribbed, stress-relieved, annealed welded construction ensures a long service life and smooth, robust operation even in continuous operation. Application areas: High-gloss polishing of wheels of all types (automotive and motorcycle) up to 24 inches Aluminum, cast, and forged wheels Polishing of other engine components Refurbishing of components, e.g., from the classic car sector or the aerospace, defense, etc. industries Technical specifications: Manufacturer: Rösler Oberflächentechnik GmbH Type: FBA 24/2 Turbo wheel processing system Working container: Inner diameter 700 mm, container depth 550 mm Wear-resistant lining: high-quality polyurethane elastomer, Rösler HD 90 Design: durable, specially ribbed welded construction, stress-relieved, annealed Motors: 2 special unbalance motors designed for continuous operation Speed: 3,000 rpm, steplessly adjustable via frequency converter Automatic reversing of direction of rotation Various programs can be stored in the Siemens PLC control system, thus achieving reproducible results. An automatic program sequence guarantees a low error rate for the operator. We have a total of over 80 vibratory finishing systems in stock; please contact us for all your vibratory finishing needs.

Condition: like new (used), Year of construction: 2023, Huber CS 550 OD Cooling Unit / Chiller Manufacturer: Peter Huber Kältemaschinenbau SE Type: CS 550 OD Year of Manufacture: 11/2023 Machine Type: Cooling Unit / Chiller / Process Cooler Cooling Capacity: 55 kW at +10 °C supply / +50 °C return temperature For sale is a like-new Huber CS 550 OD chiller with an air-cooled cooling unit and circulation pump. The unit has not yet been used. The system is suitable for industrial process cooling, machine cooling, chilled water supply, and temperature control applications. The special design is suitable for outdoor installation and winter operation. Technical Data: Model: CS 550 OD Item No.: 32-100110 Year of Manufacture: 11/2023 Temperature Range: -20 to +85 °C Internal Temperature Sensor: Pt100 Temperature Stability at -10 °C: 2 K Interface: RS232 Safety Class: I / NFL Heating Capacity: 17 kW Power Connection: 400 VAC / 50 Hz / 3Ph+N+PE Power Consumption: 27.5 kW Max. Current Consumption: 52 A Refrigerant: R449A Refrigerant Quantity: max. 23 kg Max. Operating Pressure: 28 bar Made in Germany Cooling Capacity: According to the nameplate: 55 kW at +10 °C supply / +50 °C return temperature At 20 °C ambient temperature: +15 °C: 70 kW +10 °C: 60 kW 0 °C: 33 kW -10 °C: 20 kW -20 °C: 12 kW Circulation Pump: Pump: CM5-4 Max. Flow Rate: 125 l/min Max. Head: 4.0 bar Pump Connection: G1 male Min. Filling Volume: 160 l Low-Level Alarm: 175 l Max. Filling Volume: 195 l Dimensions: External Dimensions (W × D × H): approx. 1,400 × 1,000 × 1,800 mm Net Weight: approx. 715 kg Sound Pressure Level: 79 dB(A) ± 4 dB(A) Equipment: Air-cooled cooling unit Circulation pump Housing and tank made of stainless steel Copper-brazed evaporator Digital level indicator High-efficiency fan motor Feed pump with over-temperature protection Manual bypass valve Control unit B400 / RB400 Capacitive user interface with OLED display Multi-color status indicator Hedpfxezt Iqzj Aftofl RS232 interface Separate operating/control panel Connection/connecting cables as shown in the pictures Temperature control/connecting hoses as shown in the pictures Connecting fittings as shown in the pictures Electrical components IP54 Outdoor installation / winter operation up to -20 °C Max. Ambient Temperature +50 °C Mobile unit housing Additional accessories as shown in the pictures Transport Data: Unit dimensions: approx. 1,400 × 1,000 × 1,800 mm Net weight: approx. 715 kg Wooden transport crate available. Shipping via freight forwarder possible. Condition: Like new / not yet in use. Year of Manufacture: 11/2023 Optical condition as shown in the pictures. Accessories partially in original packaging or in accessory boxes. Scope of Delivery: 1 × Huber CS 550 OD Cooling Unit / Chiller 1 × separate operating/control panel Connection/connecting cables as shown in the pictures Temperature control/connecting hoses as shown in the pictures Connecting fittings as shown in the pictures Several Huber accessories as shown in the pictures 3 × accessory boxes with contents as shown Additional accessories as shown in the pictures Wooden transport crate Availability: by arrangement. Scope of delivery as shown. Subject to change, errors and prior sale.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: L130473, Imperia & Monferrina P3 Professional pasta machine The P3 fresh pasta machine is an automatic and highly reliable machine, designed for processing all types of flour and durum wheat (semolina), ideal for producing both short and long pasta, easily achieved by simply changing the extruding die. This pasta machine is particularly recommended for small restaurants, farmhouses, pizzerias, delis, and businesses involved in selling and serving fresh pasta. the P3 can also produce sheets for lasagna, ravioli, or any other handmade pastas. The operation is simple and efficient. The external structure is made of anodized aluminium, while the parts in contact with the pasta are made of stainless steel. The machine is equipped with a control panel and complies with current accident prevention regulations. It produces 8-10 kg/h of short and long pasta using different dies, with a capacity of 3 kg. Kneading vat capacity: 3 Kg Extruded pasta production: 8-10 Kg/h Dimensions: 400x510x465h (mm) Hsdpfx Ajzuhitsftofl Weight: 58 Kg Power: 0,55 Kw Mixing vat capacity: 3 kg Extruded pasta production: 8-10 kg/h Motor power: 550 W with three-phase motor (380 V, 50 Hz) Dimensions: 400x510x465 mm Weight: 58 kg Price 2,600 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, For sale is a Kolbe K330 bone saw, manufactured in 2004, 380V, V2A stainless steel. The saw is fully functional and ready for immediate use. Hfsdpfx Afszxquaotjl Further details available upon request. Payment in cash or by advance payment! Sale only to commercial businesses. No guarantee, no warranty.

Condition: used, Year of construction: 2000, functionality: fully functional, For sale is a Bizerba VS-8D fully automatic slicing machine, complete with a base frame. 380V. Year of manufacture: 2000. The machine is ready for immediate use and has been inspected by our workshop. Hjdpfjzxqrfjx Aftofl Payment by cash or in advance! Sale only to commercial businesses. No guarantee, no warranty.

Condition: good (used), Year of construction: 1998, functionality: fully functional, For sale: a K+G Wetter SM-65STL meat grinder/cutter. The machine is entirely made of stainless steel and is ready for immediate use. Power: 380V, 50A, 25kW. Knife shaft with infinitely variable speed adjustment, range 50-5000 rpm. Mixing speed (reverse), range 50-500 rpm. Bowl with 2 speeds, 9/18 rpm. 6-blade knife head. Without a deflector plate. Further details upon request. Hfsdpezxqpwofx Aftjl Payment by cash or prepayment! Sale only to commercial customers. No guarantee, no warranty.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, For sale: a Seydelmann K40 meat cutter/sausage cutter with a blade shaft speed of 1,500 to 3,000 rpm and a 2-speed bowl. Voltage: 400V, 26A, 13kW. The machine is made entirely of V2A stainless steel and is ready to plug in. Hjdpfozxqntex Aftsfl The machine has been workshop-tested and is equipped with a 6-blade cutting head. Year of manufacture: 2001. Further details available upon request. Payment by cash or in advance! Sale only to commercial businesses. No guarantee, no warranty.

Condition: excellent (used), Year of construction: 2004, For sale: a Winkelwolf meat grinder K+G Wetter WW-130 with sorting device, 2-speed. Motor power: 19 kW, 50A, 400V. Capacity: approx. 3500 kg/h. Cutting set: 5-piece, with separating plate. Workshop-inspected, ready for immediate use. Hodpfx Aozxqlfeftjfl Further information available upon request. Payment by cash or prepayment. Sale only to business customers. No warranty, no guarantee.

Condition: good (used), Year of construction: 1998, For sale: a Treif brand slicing machine, model: Felix 100-CE. Completely made of V2A stainless steel. Year of manufacture: 1998. The machine is fully functional and ready for immediate use. 1 pair of guides, see photo. Hsdpszxqhtofx Aftofl Further information available upon request. Payment by cash or prepayment. Sale only to commercial businesses. No guarantee, no warranty.

Condition: good (used), Year of construction: 2001, For sale is a Kolbe SW-98 meat grinder, manufactured in 2001, in good and fully functional condition. The unit operates on 400 volts, 6.9A. It is made entirely of stainless steel and features a 5-piece cutting system (Unger). The machine has been workshop-tested and is ready for immediate use. Payment in cash or by advance payment. Hedpfx Afezxqfxotjfl Sale is only to commercial businesses. No guarantee, no warranty.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 1 x N&N Nadratowski / Orbmix twin-shaft mixer grinder with tote bin tipper/column loader. Supplied with various hole plates. Suitable for a variety of products including meat, poultry, fish, vegetables, petfood, sandwich fillings, etc. Manufacturer - N&N Nadratowski. Model - MG-450/160. Date of manufacture - 2011. Mixing capacity - 450 litres (approx 350 litres of product). Output - up to 2,000 kg/h, depending on product. Electric supply - 400 V / 50 hz / 3 phase. Power - 24 kW. Hfsdswplc Aopfx Aftjl Weight - 1530 kg (mixer grinder) and 282 kg (column loader). Previous use - for mixing and grinding a poultry and vegetable mixed product.

Condition: used, Year of construction: 2003, XXL-Center RAS 75.06-2 long bending center for fully automatic positive and negative bending, where it is not necessary to turn the sheet metal. Usable length 6400 mm Maximum sheet metal thickness (400 N/mm²) 1.5 mm Four motorized and extremely fast axes controlled by CNC (no hydraulics) For: • Upper and lower bending beam speed: 126 degrees/s • Upper beam speed: 60 mm/s • Back gauge travel: 12-750 mm Hedpfxozru Nze Aftofl • Back gauge speed: 350 mm/s • Bending accuracy (depending on the quality of the sheet metal): up to +/- 1 degree

Condition: used, Used Becomix type MV-2000 stainless steel premix vacuum processing vessel. Approximately 2,000 litre capacity. Has welded dished top and welded dished bottom heads. Internal rated 2 bar / full vacuum design pressure at 134 deg.c. External jacket rated 4 bar design pressure at 152 deg.c. Unit has bottom entry agitator driven by a 5.5kW 980 RPM 3/415V 50Hz electric motor. Unit is mounted on stainless steel legs. Click on the link below to see a video of the machine running. Hjdpfozvycbjx Aftefl Specifications: Capacity: 528 gal Type of stainless: stainless steel Internal Pressure: 29 PSI Internal Temperature: 273°F Jacket Pressure: 58 PSI Type Of Heads: welded dished top and welded dished bottom Legs/Lugs: Yes

Condition: excellent (used), Year of construction: 2008, operating hours: 86,100 h, functionality: fully functional, machine/vehicle number: 992793, type of input current: three-phase, overall weight: 22,000 kg, space requirement length: 9,500 mm, space requirement height: 3,000 mm, space requirement width: 9,100 mm, total length: 9,500 mm, total height: 2,300 mm, total width: 9,100 mm, For sale is a complete, automated Salvagnini P4 press brake system with a robot for the automatic stacking of manufactured sheet metal parts, 3 pallet positions, and an integrated conveyor system. This system is ideally suited for efficient and automated sheet metal manufacturing, enabling the processing and subsequent sorting or stacking of the manufactured components with minimal manual effort. Equipment: Salvagnini P4 press brake Automatic bending/edging of sheet metal parts Robot for automatic stacking of finished workpieces 3 pallet positions for flexible storage and sorting Integrated conveyor system for automated material and part transport High degree of automation Efficient manufacturing with reduced manual handling High repeatability and reproducible manufacturing quality Ideal for series production as well as flexible small-batch production Bending length: 1916 mm The bending die was renewed in mid-2024. The robot’s suction frame (OPA16S) was renewed in 2025. The combination of the P4 press brake, automatic stacking, three pallet positions, and conveyor system offers a powerful complete solution for automated sheet metal processing. Machine: Salvagnini P4 Equipment: Robot stacking / 3 pallet positions / conveyor system Year of manufacture: 2008 Operating hours: 86,100 Condition: used – very good Location: 54576 Hillesheim Inspection and test run possible by arrangement. Hedpfx Aszxhgysftsfl The machine is currently still in use in production. If required, a video of the machine during production can be sent. Price and further technical details upon request.

Condition: used, Year of manufacture 2019 Filter area 35.4 m² Volume flow 2,609 m³/h Fan: Berliner Luft Year of manufacture 2018 2,800 m³/h 2.57 / 2.61 kW Hodjw Upp Ajpfx Aftsfl

Condition: excellent (used), The REX Düker Hydro 65 is a bowl cutter from REX Düker, a recognized manufacturer of machinery for the meat industry. The machine is designed for chopping and cutting meat raw material for the production of sausages, cold cuts, and other products requiring precisely prepared meat batter. Hfjdpfx Ajztxx Njftol How does the REX Düker Hydro 65 bowl cutter work? The Hydro 65 is equipped with a 65-liter bowl and a 6-knife cutting head, driven by a 20 kW main motor. Thanks to the hydrostatic transmission, blade shaft speed is infinitely variable up to 4500 rpm, allowing the intensity of cutting to be precisely matched to the type of raw material being processed. The bowl rotates at up to 500 rpm in both directions, and the machine offers 3 separately switchable bowl speeds. Operation is controlled via an SL23 membrane keypad with contactor control and motor protection, while smooth speed regulation is available through a potentiometer. A digital display shows blade shaft speed, bowl revolutions, and temperature in real time, and safety switches for the bowl and temperature ensure safe operation. Key advantages of the REX Düker Hydro 65 The REX Düker Hydro 65 stands out with infinitely variable blade speed thanks to its hydrostatic drive, allowing the cutting process to be precisely matched to different recipes and types of meat raw material. Three independently switchable bowl speeds, together with bidirectional bowl rotation, further increase the machine’s operational flexibility. A robust stainless steel construction, a control panel with a digital display of operating parameters, and a noise protection cover combine high functionality with comfortable, safe operation — an important factor for daily, intensive work in a meat processing plant. Technical specifications of the REX Düker Hydro 65 Manufacturer: REX Düker Machine type: Hydro 65 Bowl capacity: 65 l Cutting head: 6 knives Main motor power: 20 kW Blade shaft speed: infinitely variable up to 4500 rpm (hydrostatic transmission) Bowl speed: up to 500 rpm, bidirectional, 3 speeds Power supply: 400 V, 50 Hz Protection: 63 A slow-blow fuse Controls: SL23 membrane keypad, digital display Application of the REX Düker Hydro 65 bowl cutter The REX Düker Hydro 65 is used in meat and sausage processing plants, wherever precise chopping and mixing of meat raw material is required for the production of fillings, sausages, cold cuts, and other products with a uniform consistency. Infinitely variable blade and bowl speed make the machine well suited both to recipes requiring gentle cutting and to intensive chopping of raw material.