Used Fu 115 for sale (4,365)

Condition: used, Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, valve drive, actuator, lifting drive, trapezoidal thread spindle Pjdpfxst N Adno Alhogn -Screw jack: stroke 115 mm -Tooth rack Ø 30 mm -Spindle: Ø 24 mm -Dimensions: 770/270/H105mm -Weight: 9.2 kg

Condition: good (used), Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Manufacturer: Acla, heavy duty bike 2 pcs. -Wheel size: Ø 85 x 115 mm Pgodpfx Aljf Ec R Hohjn -Inside: Ø approx. 25.6 mm -Price: complete -Weight: 2.1 kg/piece

Condition: used, Conveyor belt, belt conveyor, conveyor belt, belt conveyor, incline conveyor, incline conveyor, chip conveyor, chip conveyor Pgsdpfxelntn Te Alhen -Conveyor belt: on mobile base -Speed: 30m/min -Conveyor belt width: 115 mm -Conveyor belt length: 1625 mm, dimensions see photo techn. drawing -Height: 810 mm -Propulsion: Bonfiglioli 0.37 kW -Individual components: see photos -Total dimensions: 1645/600/H915 mm -Weight: 62 kg

Condition: good (used), Stacking boxes, stacking boxes, plastic boxes, Euro stacking boxes, transport baskets, stacking baskets, Euro stacking containers, Euro stacking containers, small load carriers, storage boxes, shelf boxes, shelf boxes -Manufacturer: Schoeller, Arca Systems shelf boxes -Type: 9121 -Quantity: 607 boxes available Pgedpfjvaluvox Alhjn -Price: per piece, minimum order 5 pieces -Dimensions: 495/115/H100 mm -Weight: 0.4 kg/piece

Condition: good (used), Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable trolley, rail clamp Psdswq H Uijpfx Alhjgn -Rail clamp: 2 pieces -Type: Item no. 2 55528 Y8 2 55528 Y12 -Dimensions: see photos -Shipping/Price: complete -Dimensions: 115/120/H100 mm -Weight: 2.5 kg/piece

Condition: used, Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: for Ø 115 mm shaft -for: gland tape Pgedpfx Aocgc Uvjlhjn -Number: 5x glands available -Price: per piece -Dimensions: 220/220/H130 mm -Weight: 7.5 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 115 mm -Piston rod: Ø 32 mm / M30 -Mounting: Ø 35 mm Pgsdsv Nharepfx Alhsn -Dimensions: Ø 90 x 450 mm -Weight: 9 kg

Condition: good (used), Electric motor, three-phase motor, fan motor, external rotor motor for fan, fan, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, electric motor fan motor external rotor motor -Type: MK 115-GDK.12.N -Power: 0.35 KW / 380 V -Speed: 1400/1020/710 rpm -Protection class: IP 54 Pgjdpfsv Ibb Hex Alhon -Dimensions: Ø 190 x 170 mm -Weight: 11.1 kg

Condition: good (used), Tailstock counter bearing for dividing head, dividing apparatus -Peak height: 95-115 mm -Recording: MK2 -Dimensions: 180/100/H110 mm -Weight: 4 kg Pgsdpfx Aljb A Ntyohon

Condition: good (used), Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter Pgsdpfxob A Sxdo Alhsn -Number of vibrating bottles: 1 -Cable length: approx. 6 m -Weight: 105 kg

Condition: excellent (used), Year of construction: 2000, Demag Ergotech 350-115 viva Pedpfswgdhlsx Alhegn Closing 35 tons Year of manufacture 2000 Scrow 25mm Pls sprue picker

Condition: ready for operation (used), Binder BD 115 Drying Oven Incubator Heating Cabinet Brooder Cabinet No. 369 Set temperature: 100°C Dimensions (internal): 510mm × 420mm × 530mm (W x D x H) Dimensions (external): 710mm × 605mm × 705mm (W x D x H) Weight: approx. 55 kg Nominal volume: 112 L Power: 0.40 kW You are welcome to arrange a viewing. We can also organize affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can be issued. This requires a valid VAT identification number. Pgjdpfx Aljyvrm Ujhjn Subject to prior sale. Visit our shop and check out our other offers as well. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description of the products only. Variations in technical data and errors in the product description are possible and subject to change.

Condition: used, functionality: fully functional, power: 84.58 kW (115.00 HP), overall weight: 16,000 kg, Year of construction: 1970, Towed roller 16,000 kg, 6 cylinders. Year of manufacture: 1970. Weight: 16,000 kg. 115 hp. Deutz engine with 6 cylinders. Pgsdpsxwvpaofx Alhjn

Condition: used, functionality: fully functional, machine/vehicle number: FN 57xxxx, Year of construction: 2018, operating hours: 7,294 h, load capacity: 1,500 kg, lifting height: 3,000 mm, free lift: 1,405 mm, fuel type: electric, mast type: duplex, construction height: 1,970 mm, fork length: 1,150 mm, empty load weight: 3,104 kg, total length: 1,785 mm, drive type: Elektro, construction width: 990 mm, Electric 3-wheel forklift Chassis number: FN 57xxxx Load center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Pedpfeywpnfjx Alhsgn Transmission: AC impulse Condition: Refurbished, no warranty Technical condition: Very good Front tire type: Non-marking Front tire size: SE 18x7-8, non-marking Rear tire type: Non-marking Rear tire size: SE 18x7-8, non-marking Battery voltage: 24V Battery capacity: 1000Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year: 2018 Description: Serviced, technically and visually reconditioned, UVV-inspected, sold without warranty or liability for material defects Side shifter, integrated 3rd valve, front work lights, overhead guard, load backrest, impulse control, full free lift, CE certificate Front and rear floor spots, multi-pilot (joystick), mechanical door system, panoramic mirror, code lock, non-marking tires, special low-profile build (under 2 meters overall height), battery (07/2018) with Aquamatik (automatic watering system), compatible external charger included

Year of construction: 2006, condition: excellent (used), Splash guard Diameter 360 mm Inner diameter 115 mm Pgjdpfxjfat Uxe Alhon Age estimated.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF14123258, bar length: 3,200 mm, bar passage: 50 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Podpfx Aoxf Hy Eelhjgn Bar length: 1,200 – 3,200 mm Passage: 8 – 50 mm

Condition: used, Year of construction: 2025, operating hours: 2 h, Operating hours: 2 New tractor with dealer daily registration prior to delivery Standard equipment / technical data Engine Rated power (ISO): 82 / 110 kW/hp at 2200 rpm Maximum power: 86 / 115 kW/hp at 2000 rpm Maximum torque: 460 Nm at 1600 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4-cylinder / 4.4 l, 4 valves, STAGE 5 Regulated turbocharger, SCR catalytic converter DOC – Diesel oxidation catalyst SC soot particle filter One-piece, tiltable engine hood Exhaust on right side, in front of cab Fuel tank capacity: 198 liters / AdBlue: 18 liters Transmission / PTO 16/16-Speed Dyna-4, SpeedMatching, 40 km/h PowerControl left-hand operation with powershift reverser, 4-step powershift Permanently cooled wet multi-plate clutches with independent lubrication system Dual-speed PTO: 540 / 540E / 1000 rpm Electronic shift in cab PTO START/STOP button on left rear fender Hydraulics / Rear linkage Open Center system, 58 l/min total flow, max. 200 bar 2 control valves with hydraulic couplers: 1x single/double-acting, pressure relief + 1x single/double-acting, neutral leak, SST Category 3 quick coupler with balls and catcher bowls CAT 3/2 Lower link draft control 5,200 daN maximum lift force, 2 external lift cylinders Adjustable lift rods on both sides and 2 side stabilizers EHR with external operation on both rear fenders Electrical equipment Psdpfxeyvmq Is Alhjgn Thermostart, 120 A alternator Electric battery isolation switch 12 Volt power supply for external devices with socket Axles / Additional weights Rear axle ND with flange hub Oil-cooled disc brakes Height-adjustable automatic drawbar Rear fender outer width 2.00 m, without extensions Front weight carrier with integrated drawbar and towing pin Driver's station Standard cab with vibration damping, standard roof, ventilation and heating, air conditioning Integrated safety frame with tinted glass Doors on both sides with safety steps Adjustable steering column (height & tilt) Air-suspended driver's seat with armrests, swivel adapter, and seat belt 2 large telescopic exterior and wide-angle mirrors Interior mirror Analog-digital dashboard (SIS) Radio pre-wiring with antenna and speakers 4 work lights each at the front and rear of the cab roof 2 headlamps each in the engine hood and on the handrails, 2 work lights on rear fenders Rear window washer/wiper All-wheel front axle with selectable differential lock Special equipment With fuel tank protection PowerControl & brake to neutral (clutch effect) 100 l/min Open Center hydraulic system oil flow sharing (58+42 l/min) Leak oil collector at quick couplers 3 control valves: 1x pressure relief, double-acting, float, SST + 1x double-acting, neutral leak, SST + 1x double-acting, neutral leak, SST + free return 2.5 t front linkage, 1 hydraulic hose set, electrical socket 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ Wide rear fender extensions Air conditioning Cab with mechanical suspension Telescopic exterior and wide-angle mirrors Passenger/instructor seat with belt Air-suspended driver's seat, automatic setting with seat belt, swivel adapter, and armrests Rear window washer/wiper Automatic battery isolation switch, 12

Condition: used, functionality: fully functional, machine/vehicle number: FN 51xxxx, Year of construction: 2016, operating hours: 3,776 h, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,455 mm, fuel type: electric, mast type: triplex, construction height: 2,090 mm, fork length: 1,150 mm, empty load weight: 3,203 kg, total length: 1,785 mm, drive type: Elektro, construction width: 1,070 mm, Electric 3-wheel forklift truck Chassis number: FN 51xxxx Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: AC-Impulse Condition: Reconditioned without warranty Technical condition: Very good Front tires type: Superelastic Front tires size: SE 18x7-8 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Pgedorba Ttepfx Alhen Rear tires Size: SE 18x7-8 Rear tires Condition: 80 - 100% Battery Volt: 24V Battery Ah: 1000Ah Battery manufacturer: Jungheinrich Battery type: PzS Description: professionally reconditioned by the manufacturer, UVV-approved, without warranty/liability for material defects Sideshift, attached with quick couplings 3rd valve, roof cover, impulse control, full free lift, flashing light, solo pilot (single lever), interior mirror, battery (regenerated by the manufacturer 11/2023) with Aquamatik, external charger suitable

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 200 kg, REA Jumbo 115 / Jumbo 200, mobile warm air generator (230 V) with separate flue gas duct, mounted oil burner RG 4, pre-installed heating oil filter, radial fan, and plug-ready thermostat interface. Year of manufacture: 2007 - Rated heat input: 115 kW - Air output: 9,000 m³/h - Connection: 230 V - Weight: 200 kg Technical highlights of this series: - Burner hood with oil drip tray - Outlet opening: Ø 600 mm - Pre-fitted for recirculation operation Pgedsyq Ricjpfx Alhon - Shock-protected electrical distribution - Robust construction with large wheels for easy transport, even on rough terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as flue pipes and rain caps are not included in this offer but can be provided on request. Note: The buyer can arrange collection via a freight forwarder. If you do not have contact with forwarding agents, we are happy to provide addresses or arrange inquiries on your behalf.

Condition: good (used), functionality: fully functional, Technical data (according to nameplate): • Manufacturer: Heckert Werkzeugmaschinen GmbH • Model: FU 315 • Year of manufacture: 1997 • Machine no.: 19019 • Temperature range: +5 to +35 °C Podjymd Idopfx Alhsgn • Total weight: approx. 3.1 t • Made in Germany Equipment / Features: • Universal milling head • Infinitely variable or widely graduated feeds (see diagram on the machine) • Coolant system • Electrical control cabinet (clearly arranged) • Digital display (see photos) • Heavy-duty machine construction • Very quiet operation

Condition: good (used), functionality: fully functional, Equipment & Features: • Universal milling head • Mechanical feeds • Digital position display Mitutoyo KA-200 (3 axes) • Solid cast iron construction • Classic, user-friendly controls • Electrical system and control by Schiffselektronik Rostock • Original Heckert nameplates available Technical Data (according to nameplate, excerpt): • Mains voltage: 380 V • Frequency: 50 Hz • Rated power: approx. 2.2 kW Psdpfoymdwlsx Alhegn • Feeds adjustable • Machine weight: approx. 3.2 t

Condition: good (used), Technical Data (according to nameplate): • Power type / Frequency: 3~ / 50 Hz • Rated voltage: 380 V • Control voltage: 220 V • Connected load: approx. 8 kW • Rated current of machine: approx. 19 A • Fuse protection: 50 A slow-blow Equipment / Features: • Universal milling head • Feeds in X, Y, and Z axes • Original control panel • Sturdy cross table • Coolant system • Very heavy-duty and durable construction • Ideal for steel, aluminum, and plastics Pgodpsymdu Refx Alhon

Condition: ready for operation (used), Clamping force: 350kN, tie bar distance: 280mm/280mm, platen dimensions X/Y: 410mm/410mm, min. mold installation height: 180mm, max. opening stroke: 350mm, max. platen distance: 530mm, screw diameter: 22mm, shot volume: 47.5cm³, shot weight (PS): 41g, injection pressure: 2440bar, control: NC4, heating power: 6.3kW. Machine dimensions X/Y/Z: approx. 3100mm/1100mm/1600mm, weight: approx. 1800kg. On-site inspection is possible. Pjdpfx Aowaa H Dolhegn

Year of construction: 2009, condition: ready for operation (used), A complete Grieser vacuum dissolver system for the production of homogeneous paste mixtures is available. 1) High-performance vacuum dissolver Grieser GFVD 750 FU, year of manufacture: 2009, drive power: 75kW, mixing shaft speed: 1500rpm, total volume: 550l, mixing volume: 400l, mixing tool diameter: 450mm, vacuum output: 160m³/h, weight: approx. 2800kg. 2) Fluidizing container Grieser FB 2000, year of construction: 2009, total volume: 2000l, usable volume: 1300l, emptying capacity: 10l/min, discharge speed: 0.9m/s, weight: approx. 2000kg. 3) Big bag emptying station. 4) Pump system for liquid components, type: IBC, number of IBCs: 4, volume: 1000l. 5) Centrifugal fan V30/2, volume flow: 410m³/h. Documentation available. On-site inspection is possible. Podpfx Ajwtg Ihslhsgn

Condition: ready for operation (used), Two drying and heating ovens Binder for laboratory use are available. 1) Binder ED 400, usable volume: 400L, internal dimensions X/Y/Z: 1000mm/800mm/520mm, levels: 2, max. load per level: 35kg, max. total load: 90kg, recommended wall clearance rear/side: 160mm/100mm, max. temperature variation: +/-3K, max. temperature: 300°C, power: 3.4kW, machine dimensions X/Y/Z: approx. 1250mm/1050mm/800mm, weight: approx. 125kg. 2) Binder KBF 115, usable volume: 100L, max. temperature: 100°C, power: 1.7kW. Documentation available. An on-site inspection is possible. Pjdpfxjxhntle Alhjgn