Used Gear Hobbing for sale (14,500)

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 280 mm max. module: 7 weight of the machine ca.: 13 t table turning speeds: 100 U/min table diameter: 250 mm min. number of teeth: 4 hob turning speeds: 1500 U/min max. hob diameter: 160 cutter length max.: 230 mm Machine in good condition. Available 01.08.2024 Fedpfxexc Ugbe Aabjgh *

Condition: used, Technical details: center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm hobbing length: 2000 mm number of teeth: 2 - 50 feed:: 0,023 - 5,17 / mm/min module max. : 8 / 12 spindle bore diameter: 102 mm workpiece rpm : 18 - 224 U/min Fgodpfov U T Dyjx Aabeh tailstock quill adjustment: 100 mm total power requirement: 9,5 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,6 x 2,1 x 2,0 m

Year of construction: 1940, condition: used, Automatic universal hobbing machine for the production of spur gears worm gears Largest milling diameter 120 mm Smallest milling diameter 5 mm Smallest tooth pitch module 0,30 Largest tooth pitch 2 mm largest milling length 100 mm Fodpfx Aokw T Rmsabsgh with all accessories

Condition: used, Year of construction: 1987, max. wheel diameter 150 mm gear width . mm max. module 5 min. module 0,5 Control . Fgsdpjwhq Afefx Aabeh total power requirement . kW weight of the machine ca. 10.000 t dimensions of the machine ca. 6500 × 2700× 3600 m

Year of construction: 1984, condition: ready for operation (used), A Pfauter vertical CNC gear hobbing machine is available. Modules min./max.: 1/3, max. workpiece diameter: 150mm, max. tooth width: 150mm, milling head tilt: +/-45°, milling cutter axis-table axis distance: 10mm-160mm, table diameter: 160mm, table bore: 63mm. Tool holder: SK40, max. cutter diameter: 130mm, max. cutter length: 220mm, speed: 600rpm, feed: 1500mm/min, tangential path: 170mm, rapid traverse: 3m/min. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2500mm, weight: approx. 6500kg. On-site inspection is possible. Fsdpfewkih Eex Aabogh

Condition: good (used), Liebherr / Lorenz L 301 / Gear Hobbing Machine - Maximum hobbable module: 6 - Max. workpiece diameter: 300 mm - Travel of hob head slide: 225 mm - Worktable diameter: 315 mm - Milling spindle centerline above machine table: 165 mm - Max. workpiece length: 680 mm - Infinitely variable radial feed - Rapid traverse of hob slide: 900 mm/min - Max. hob shifting / tangential travel: 150 mm Fedjw A Nfhjpfx Aabogh - Change gears - Belt filter - Various accessories - Documentation Dimensions: L x W x H: 2.6 x 2 x 2.6 meters / Weight: 6000 kg Errors and omissions excepted.

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 280 mm max. module: 7 weight of the machine ca.: 13 t Fgjdjxc Ic Nepfx Aabsh

Condition: ready for operation (used), Gear hobbing machine type FD320, FD500 and FD 800 Cugir Maximum module 6 to 10 mm Fedpscrd Nmefx Aabogh Max. working diameter 320 to 800 mm

Condition: like new (used), functionality: fully functional, total length: 2,600 mm, total height: 3,795 mm, total width: 5,530 mm, overall weight: 16,000 kg, Maximum pitch: Module 12 Maximum diameter: 700 mm Axial travel (Z-axis): 400 mm Radial travel (X-axis): 500 mm Tailstock stroke: 600 mm Max. tool speed: 400 rpm Max. Hob diameter: 300 mm Max. Hob length: 300 mm Standard Hob spindle: 40 mm Fgodpfxjxhgzhe Aabjh Table diameter: 450 mm Tool holder chuck cone: NT 50 Angle of head inclination: 35 degrees Max. table load: 1800 kg Supply voltage: 380 V Integrated with SIEMENS SINUMERIK CONTROLLER 840D

Condition: used, Year of construction: 1988, max. wheel diameter 150 mm Fsdpswhq Eajfx Aabjgh gear width . mm max. module 5 min. module 0,5 Control . total power requirement . kW weight of the machine ca. 10.000 t dimensions of the machine ca. 6500 × 2700× 3600 m

Year of construction: 1999, condition: ready for operation (used), Module size: 5mm, max. workpiece diameter: 180mm, axial travel: 400mm, shank travel: 200mm, milling cutter diameter: 150mm, tool speed: 2250rpm, table speed: 250rpm, max. tool clamping length for bore milling cutter/end milling cutter: 236mm/360mm, control: Liebherr PC-NC. Documentation available. On-site inspection is possible. Fgodpfx Aajvpviusbjh

Condition: good (used), Liebherr - Lorenz S800 Gear Hobbing Machine -Well-maintained machine with comprehensive accessories -1x pallet of change gears -1x pallet of hobbing cutters -1x pallet of arbors -DOCUMENTATION -Max. workpiece length with counter support: 600 mm -Max. workpiece length with counter support retracted: 800 mm -Max. travel of the milling slide: 360 mm -Largest pitch machinable with largest workpiece: 5 Pi / in standard range: 8 Pi -Spindle taper - milling spindle: MT 5 -Arbors: 22/27/32/40 mm -Max. cutter diameter: 186 mm -Max. cutter length: 170 mm -Max. cutter shift: 80 mm -Cutter speeds: 40-220 rpm -Feed rates steplessly adjustable / horizontal -Feed rates steplessly adjustable / vertical -Feed rates steplessly adjustable / tangential -Clamping table without coolant rim: 550 mm -Clamping table bore: 100 mm -Clamping arbor taper: MT5 Dimensions: LxWxH 3.6 x 1.8 x 1.9 meters / Weight 5000 kg Subject to errors and input mistakes. Fgsdpsw R Tyksfx Aabjh

Condition: used, Year of construction: 2000, Technical details: Fjdpfxsxc E Iis Aabjgh max. wheel diameter: 180 mm gear width: * mm max. module: 4 total power requirement: 14 kW weight of the machine ca.: 8 t slide travel axial ( Z-axis ): 300 mm work piece - max.: 490-640 mm

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Fodpfx Aot Hw D Rjabsgh Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 1989, max. wheel diameter 150 mm max. module 5 min. module 0,5 weight of the machine ca. 10.000 kg dimensions of the machine ca. 6500x 2700x 3600 m Fjdpfswhq Egsx Aabjgh

Condition: good (used), MIKRON - A 21 / 2 Gear Hobbing Machine -Full technical specifications see photos -Change gears -Mitutoyo magnifier -Original operating manual - COMPLETE Fjdpfx Aaow D Dbyebogh -Many spare parts -Very well-maintained overall condition Dimensions: LxWxH 1.2x1x1.6 meters / Weight 1000kg Errors and input mistakes excepted

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 200 mm Fgsdpfx Ajxc E H Ssabjh gear width: 60 mm max. module: 7 weight of the machine ca.: 15 t table diameter: 180 mm table turning speeds: 100 U/min hob turning speeds: 750 U/min Machine in good condition, without feed, without automation Available 24.08.2024 *

Condition: used, Year of construction: 1977, max. wheel diameter 400 mm gear width 280 mm Fodpet Hw Hxefx Aabjgh max. module 1 min. module 4 total power requirement 15 kW weight of the machine ca. 6000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1986, max. wheel diameter . mm gear width . mm max. module . weight of the machine ca. 7 t Fgedpoucgw Defx Aabjh

Condition: good (used), Gear Hobbing Machine STAEHELY SN 505-1 -Max. gear diameter 600 mm -Gear width 280 mm -Max. module 5 Fedjw D A R Tspfx Aabsgh -Centre height 20 / 390 mm -Rotary table diameter 420 mm -Table bore 80 mm -Spindle taper MK 4 -Cutter speed 53-200 rpm -Number of feeds 10x -Original documentation -52 pcs – hobs included -156 pcs – change gears included Dimensions: LxWxH 2.5 x 1.5 x 2 metres / Weight 3000 kg Subject to errors and omissions.

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 200 mm gear width: 250 mm max. module: 3 min. module: 0,5 total power requirement: 45 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation Fgedpow T Tngsfx Aaboh *

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece Fgsdpfx Aaet Hw R Dsbjh carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1986, max. wheel diameter 150 mm max. module 5 min. module 0,5 weight of the machine ca. 10.000 t dimensions of the machine ca. 6500 × 2700× 3600 m Fgodpfoucgw Rjx Aaboh

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm gear width 300 mm max. module 4,5 min. module total power requirement 20 kW weight of the machine ca. 6 t Fgedpfx Aaot Hwxbobeh dimensions of the machine ca. m

Condition: used, Year of construction: 1988, weight of the machine ca. 5 t working width max. 300 mm 6 extensive accessories viele Wechselräder +++++ Fjdpevrk Ecjfx Aabogh Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++