Used Genome Sequencer for sale (334)

Condition: used, Year of construction: 1996, Technical details: pressure: 300 t chamfer lenght: 6000 mm control: Delem DA 24e distance between columns: 2x5100 mm throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW weight of the machine ca.: ges. ca. 66 t dimensions of machine: L:12,0xB:2,3xH:3,65 m Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, - program sequence via both presse(synchronized) and single available Optional are tools available! Dcsdsu Ib Drspfx Addsr Copy of documentation available i.D. *

Condition: good (used), Bluhm Weber Legi-Air- 4050S Labeling Machine 4.14.1 Basic construction The machine is designed as a closed aluminum profile frame and is very compact. The control cabinets are integrated in the lower part of the frame. The main valve terminal is located behind a service door below the control panel. The system includes four workstation stops. Operation is via a touch screen. The control panel is mounted on the right side of the rack. A labeling system from Bluhm Weber is used in the station; the documentation from Bluhm applies here accordingly. 4.14.2 Functional sequence - The incoming workpiece carriers with IO modules are stopped, lifted out (positioned) and contacted in sub-stations 10.1 or 10.2. In these two stations Dcjdsibh Tkjpfx Addjr - Automatic labeling of the IO modules takes place in substation 10.3. The labels and their contents are generated automatically, as is their application to the devices. - After labeling, the module is finalized in station 10.4, where it is stopped, lifted out and contacted. After finalization, the workpiece carrier is automatically ejected from the station. Bluhm Weber Legi-Air- 4050S

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2006 Motor power 7,5kW Dcedpfxsxtxi Ij Adder Input table automatic feeding 4,10m (throughfeed system) Outut table automatic 6 pcs. kickers on right outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Dodpfxsd Etadj Addecr Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 990-185, overall weight: 4,500 kg, input current: 80 A, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 1,000 l, noise level: 83 dB, Equipment: cooling unit, emergency stop, The WEIMA TH1500 briquetting press compacts all materials suitable for pressing within a single die. The resulting briquette is dimensionally stable and alternately ejected, ensuring smooth and continuous operation. The axial piston hydraulic pump, powered by a 30 kW motor, produces up to 7 briquette cubes per minute. A distinctive feature of this model is the precision die where the pressing process takes place. Dcodpjxtm Ilsfx Addjr The movement sequences of the cylinders and the die are monitored and controlled by a displacement measurement system, ensuring high accuracy, repeatability, and consistent briquette quality. Technical Data: Hydraulic system motor power: 30 kW Operating voltage: 400 V / 50 Hz Nominal current: 80 A Protection fuse: 125 A Current drawn by hydraulic system: 55 A Machine weight: 4500 kg Oil tank capacity: 1000 l Output: approx. 7 briquette cubes/min Other available machines: Serial no. 990-184 – Year 2014 Serial no. 990-224 – Year 2018

Condition: new, Year of construction: 2017, functionality: fully functional, Item number: 470722 Dsdpfju Raqpex Addjcr Serial number: 470722-5 Material: Aluminum Total weight: 27 kg Dimensions Base plate: 460mmx300mmx25mm Upper guide plate: 300mmx300mmx22mm Overall height: 105mm Travel: 130mm Total length: 680mm The Tünkers LE100-150 VRL SB T02-4 is a pneumatic linear unit designed for precise and repeatable linear movements in industrial applications. With a pneumatic drive, it is ideal for automated production processes in which exact positioning and stable sequences are required. The robust design ensures a long service life and low maintenance requirements, even under intensive use and demanding conditions. The unit can be flexibly installed both horizontally and vertically, which increases its adaptability to different areas of application. In addition, it is possible to integrate sensors and control components to monitor and control the movement even more precisely. This makes it a versatile and reliable solution for industrial applications where high precision and durability are required.

Condition: used, Year of construction: 1960, Technical details: current capacity: 60 kVA throat: 680 mm arm distance: 115 / 415 mm pincer opening adjustable: 180 mm rated capacity: 60 kVA welding power: 71 kVA electrode capacity: 100 bis 600 daN voltage: 380 V / 50 Hz V air pressure: min./max.: 6 / 10 bar cooling water consumption: 12 l/min weight of the machine approx.: 685 + 200 kg connection voltage: 380 V / 91 A V rated capacity: 60 kVA connected load: 54 kVA dimension L-W-H: ca. Maschine: 1.700 x 850 x 1.750 mm dimension L-W-H: ca. Aggregat: 900 x 650 x 1000 mm POINT WELDING MACHINE - WELDING TRANSFORMER Direct current three-phase welding machine Application: Spot, projection and series spot welding Maximum short-circuit power 89 kVA Primary short-circuit current 135 A Secondary current = short-circuit current: 25 kA and welding current max. 20 kA Electrode stroke max. 90 mm; electrode force min./max.: 100 daN / 600 daN Stroke sequence max. with 10 mm stroke 400 strokes/min. Spot fitting: electrode holder Ø 30 mm, adjustable 180 mm, arm distance = min./max.: 115 / 415 mm Dsdpfx Asu Nv Emjddecr 2-fold foot switch Cooling unit, mobile = movable on wheels, connection power 1.45 kW, pipe connection R 3/4 inch, coolant R22 *

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Feed speed 8000 mm/min. turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after torque detection. (preferably in combination with HSS tool) -Interface set Contents: - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified Dcjdpfx Aexp Rywedder programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) - Used machine without warranty - - All dimensions, weight and performance data are non-binding

Condition: good (used), Year of construction: 2005, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2005 Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table automatic 6 pcs. kickers on left outfeed table Dedpfoxtxg Hex Addecr Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Djdpfx Aod Etagsddjcr Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Condition: good (used), Year of construction: 2019, operating hours: 1,994 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Fanuc, controller model: Fanuc 31i-B, spindle speed (max.): 10,000 rpm, number of spindles: 1, mount diameter: 100 mm, Operating hours: 7194 / usage time: 1994 Year of construction: 2019 Control unit: Fanuc 31i-B Spindle: PC100i (10.000 1/min) Tool clamping system: HSK 100 Dcodpfxsvvmnus Addsr Tool magazine / places (Options): Chain/50 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 400, IKZ 70 bar Positioning range XYZ (mm): 1000 / 1000 / 1000 Pallet size (mm): 630 X 630 Workpiece clamping: Hydraulic 80 bar Additonal options, Specifics: HELLER facing slide unit; Receiver for measuring probe (RENISHAW); Coolant temperature control; forward looking collision avoidance; Interface for exhaust system; 3 colour status lamp; work area flush; Scraping conveyor for wet machining; Fast drill fracture sensing (SBBK); multi-spindle-head support (MSK); Thermal growth compensation; Feed force display; Automatic loading sequence; Automatic unloading sequence; increased tool weight 35kg; tool codechip; Since response emails from Maschinensucher often end up in the spam folder, we kindly ask you to regularly check this folder or contact us directly.

Condition: good (used), Year of construction: 2014, functionality: fully functional, overall weight: 2,200 kg, KUKA KRC4 linear axis 1500/3T Article number: 8143983 Djdpevzxg Tsfx Addscr Serial number: 143983 The KUKA KRC4 linear axis is a high-precision and robust motion unit that is ideal for industrial applications. It ensures precise control of motion sequences and plays a central role in automation processes and robotic systems within production. Its stable construction ensures consistently reliable performance, even in the most demanding applications.

Condition: used, Technical details: machine weight approx.: auf Anfrage kg voltage: 50 Hz current- max.: 230 A dimension machine xH: auf Anfrage m Dcsdpfxou N Avle Addor Measured value capture processing Recording of machine quality measurements ‘Mode of operation: Measuring the relative movement between tool and workpiece.’ (Excerpt from operating instructions) Measuring computer Device options: -sequential measurement -Test plan management -16 features -sequence triggering -Diskette drive Control unit manufacturer Nieberding, serial no. 8-19863 with connection for air conditioning and shut-off valve Equipment: 2x precision measuring display and maintenance box Accessories Test mandrel Ø 48mm and test device *

Condition: new, PAK-1 Unbalance Measuring Unit is designed to modernize your balancing machine. A balancing machine has a long mechanical life, but prolonged use leads to gradual failure of electronics and measuring instruments, causing problems with spare parts and lack of technical support. Minimize downtime and ensure the reliability of your balancing machine by upgrading it with a new advanced measuring unit. The PAK-1 unbalance measuring unit works in all balancing machines of most existing designs and manufacturers. Confidence in results and ease of use: Easy to set up and work with, our devices do not require any special theoretical knowledge. Wide range of functions for your balancing machine: The use of modern microprocessor technology and many years of experience of our developers allows us to implement functions that were previously unavailable to other manufacturers. Your machine complies with ISO 21940: Balancing machines equipped with the PAK-1 unbalance measuring unit fully meet the precision requirements of modern standards. HIGHLIGHTS • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • Easy to learn working skills and maintenance for any employee. INCLUDES: 1) vibration sensor signal processing unit, 2) fanless industrial computer with touch screen, 3) new vibration and speed sensors, 4) metal protected cable set. SEQUENCE OF WORKS for modernization of the measuring unit - Replacement of the existing measuring system with the balancing complex PAK-1 based on an industrial computer; - Installation of new vibration sensors and rotor speed sensor - Replacement of all connecting cables; - Adjustment of the measuring unit on the balancing machine; - Training of personnel with skills to operate the machine. VTM GROUP offers to upgrade your balancing machine. We repair and modernise various old balancing machines of all types from all manufacturers. It's cost effective. Dcedpfx Adjq Ttn Dsdsr An alternative to buying a new balancing machine in 95% of cases. Urgent. Work can be done at customer site within 1-2 days. New components for modernization of your machine: • Installation of new measuring system and vibration and speed sensors. • Installation of new electrical equipment • Manufacturing or repair of the rotation drive • Manufacturing of new rollers Every business is different. Let's discuss your task. We can offer a solution for any balancing machine. Please contact us to get the best offer! 👇

Condition: good (used), Year of construction: 2022, I sell the automatic pneumatic end cutting saw Salvamac Salvapush 2000, year 2022. Input table automatic feeding 6,10m (pusher system) Outut table 3,00m Dodpfx Adsvxbmwodjcr Total length: 10,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 20,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 28,000 mm, travel distance Z-axis: 850 mm, positioning speed: 40 m/min, workpiece weight (max.): 35,000 kg, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, NS-12020H PROFILE STEEL LASER CUTTING AUTOMATION LINE Technical Specifications Laser Power: 12000W-20000W X-axis Travel: 3500mm Y-axis Travel: 28000mm (customizable) Z-axis Travel: 800mm A-axis Travel: ±90° C-axis Travel: ±90° U-axis Travel: 30mm Maximum Speed: 40m/min Positioning Accuracy: ±0.1mm Main Features： Simple and Stylish Dcodpfovmwxxox Adder Integrated simple structure with a mobile design. Features a main control panel, laser unit, chiller, electrical cabinet, and cantilever beam structure, all highly integrated for stable mobility and operation. Quality Assurance Precision calibration and compensation of steel profiles. Enables automatic positioning and error detection of steel profiles. High positioning accuracy, low sizing error, and a 100% one-time through-hole rate. Increased Efficiency, Reduced Costs Professional material-checking software enables one-click nesting. Optimizes cutting sequences based on raw materials and component specifications. Automatically joins leftover materials to minimize waste and reduce costs. All-in-One Service Powerful 3D five-axis CNC technology. Supports profile cutting and 45-degree bevel cuts. Adapts to various cutting processes for different applications. Enhanced Quality and Efficiency Seamlessly integrates with TEKLA steel structure design software for professional and efficient operations. Reduces complex modeling processes and saves time on manual drawings. Enables one-click generation of component process codes to significantly boost production efficiency. Smart Management Automated loading and unloading system for streamlined feeding and cutting. Fully automated one-stop workflow. Efficiently completes bulk operations, reducing manual intervention and labor costs.

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: Centre distance: 1100 mm Centre height: 180 mm (250 mm optional) Workpiece weight: 100 kg between centres (unsupported), 300 kg between centres (supported) Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT4, infinitely variable speed control 30–450 rpm, swivel range 0–90° Tailstock: MT4, quill stroke 45 mm Quill force: 200–600 N manual (up to 2500 N adjustable, optional) Table swivel angle: 10° Cross feed travel: 80 mm Rapid traverse: 50 mm Coarse adjustment (air cushion): 280 mm External grinding spindle motor: 4 kW (5.5 kW optional) Stepless grinding wheel speed adjustment via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Dcjdoiv Au Eepfx Adder Hydraulic tank: 80 litres Net weight: 3,800 kg Feed drive via DC motor Air cushion-assisted rapid positioning of the grinding spindle headstock for quick and safe positioning to the grinding location. Separate drive for external and internal grinding spindles. Fully automatic operation sequence, infeed movement via cam switch: Rapid approach, rapid retraction, grinding mode, infeed stop, micron infeed. Automatic longitudinal grinding cycle Centralised coolant supply for all grinding zones Workpiece headstock with infinitely variable drive for both live and lockable spindle modes. New digital infeed control with Siemens panel and Siemens PLC for both longitudinal and plunge grinding, parameter input for retraction, infeed amounts, feeds, spark-out times, idle strokes; compatible with the previous Karstens infeed control; featuring a colour Siemens touch panel; HEIDENHAIN scale on X and Z axes. Comparable to Weiss, EMAG, GP cylindrical grinding machines, Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat.

Condition: good (used), functionality: fully functional, Technical details: SEW motor Type: DV132H8/4BH/HF/TH rpm: 700/1450 IP:54 Hz: 50 400V AC Dedpfx Ajwu Dbboddecr Brake: 400V kg: 83.94 The SEW motor with rotary table is a powerful and versatile drive solution, ideally suited for precise positioning and automation tasks. The motor stands out due to its robust construction and reliable operation, ensuring stable and efficient performance. The integrated rotary table allows flexible and accurate control of movement sequences, making it particularly suitable for use in manufacturing and assembly applications.

Condition: new, Year of construction: 2025, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,000 mm, cutting height (max.): 150 mm, table length: 3,200 mm, Basic Configuration - Electrically powered height and tilt adjustment 0-46° for the main saw blade with automatic correction of the cutting height when tilting the saw unit - Control panel at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manual adjustment via measuring scale, including manual fine adjustment, cutting width 1,000 mm Djdpfjxuquljx Addjcr - Angle fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Max. saw blade projection 154 mm, max. saw blade diameter 450 mm - Drive power 5.5 kW (7.5 HP) with three speeds (3,000/4,000/5,000 rpm) - AKE tool clamping system for the main saw blade - Working height 91 cm Control System - Electrically powered height and tilt adjustment, also on both sides (+/- 46°)*, for the main saw blade with automatic height correction and digital displays - Electrically powered adjustment of the parallel fence* - Electrically powered adjustment of the CNC miter fence UNO 90* - Automatic size correction on the parallel fence and angle fence when tilting the saw unit - Digital speed display or stepless speed control (VARIO)* - Electrically powered adjustment of the scoring unit, two or three axes* - Stepless fine adjustment of the axes via +/- buttons - Control of vacuum clamping in the double roller carriage* - Easy axis calibration - Machine diagnostics - Operating hours counter - USB interface - Recall of the last dimension entered (back function) - 99 storable cutting programs - Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete - Automatic conversion from peak to blunt measurement on the parallel fence and angle fence, taking material thickness and tilt angle into account - Compound angle cut function with automatic calculation of missing angles or dimensions - Advanced tool management · Storage of the scorer position (3-axis scorer)* · Saving of main blade thickness and cutting width · Saving of main tool speed · Max. 100 storable tools - Additional functions · Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete · Chain dimension function: cutting sequences with identical distances on the parallel fence, calculated on both sides of the saw blade · Angle cut: by trimming the oversize, the desired finished size is produced after entering the edge angle · 999 storable cutting programs *optional accessories The following options are included: - Pattern holder - Extended cutting height incl. tilting - Motor 5.5 kW (7.5 HP) VARIO - 2-axis scorer unit - LED lighting - Double roller carriage with a length of 3,200 mm - On/Off switch on double roller carriage - Digital miter fence Digit L - CNC parallel fence 1,300 mm - Front support roller - Duplex 1350

Condition: good (used), Code: 0188 Brand: GIBEN Model: ONIX SP 90 CHALLENGE LINE - CE Standard Automatic horizontal panel saw with clamps for cutting wood panels, multilayer panels, furniture, composite materials, sandwich panels and various materials - CE Standard Cutting dimensions mm 4400 x 4300 Blade projection mm 90 Blade carriage: feed speed 5/100 mt/min - return speed 100 mt/min Main blade diameter mm 350 - Motor Hp 12,5 Scoring blade diameter 180 mm - Motor Hp 2 Dcedew Ec Riepfx Addjr Pusher: feed speed 1/25 mt/min - return speed 60 mt/min Frontal loading of panel stack and pusher with clamps N° 3 front air cushion tables Automatic pusher with side upper guides equipped with 7 pneumatic clamps. The steel clamps keep the stack blocked throughout the panel sizing cycle up to the last trim cut. Automatic lateral aligner Automatic adjustment of the blade projection in relation to the height of the pack to be sawn. Electronic control of the speed and position of the saw carriage Easy access to the saw carriage Pneumatic unit for rapid tool removal G-VISION control: Giben machine control software installed on a PC. Multi-tasking Microsoft Windows XP/2000/NT operating system for easy networking Advantages: Sequential control of cutting patterns, number of panels, and pattern sequence change. Parametric control of the feed speed of the saw carriage according to the stack height and trim width. Direct control of machine functions. Setting of cutting patterns. Suction: diameter suction inlets 200 mm Compressed air 6-7 bar Overall dimensions of assembled machine: mm 6400 x 7500 x 1800 h Overall dimensions for transport: machine mm 6500 x 1500 x 1800 h - pusher mm 5200 x 1200 x 1200 h Total weight kg 3200

Condition: good (used), Year of construction: 2007, I sell the automatic pneumatic end cutting saw OMGA T521, year 2007. Dedpevxu Rpofx Addecr Input table automatic feeding 5,10m (pusher system) Outut table 1,50m Total length: 8,00m Optimising with automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: like new (used), Year of construction: 2021, operating hours: 494 h, Operating hours total: 494 h Load hours: 237 h Maintenance freshly performed -The variable speed screw compressor NOBEL with 'DNair2' microprocessor control is already factory-prepared for the SMS module (optionally available under: 9062744) -The controller communicates in plain text; all important operating states can be read directly. -The controller has an RS 485 interface Features: Thermal control valve compressor block POWERSYSTEM separate radial fan, temperature controlled for optimal cooling Very good accessibility for all maintenance work Rotation direction monitoring using phase sequence relay without dryer, standard with galvanized cyclone separator tank Technical details: Model: Powersystem NOBEL 15-10 DV Pressure bar: 10 Delivery rate L/min: 840-2100 Motor kW/HP: 15/20 Voltage Volt/Hz: 400/50 Noise level dB (A): 68 Weight: 250 Kg The machine can be demonstrated on site under power if desired. All information without guarantee Dcsdpfx Asqd Uvusddjr Errors and prior sale excepted Sale EXW free loading from warehouse Hessisch Lichtenau. Sale exclusively to commercial buyers, excluding any liability for material defects. Liability for damages resulting from injuries to health, body, or life and grossly negligent and/or intentional breaches of my duties as a seller remains unaffected. This offer is exclusively aimed at entrepreneurs (commercial users) or dealers. No sale to consumers/end customers.

Condition: used, This listing is for the Eppendorf xplorer plus electronic pipette Dcedpfx Ajxv Di Sjddsr The unit is in full working condition and is ready for immediate use Eppendorf Xplorer™ Plus Electronic Pipette – Single Channel The Eppendorf Xplorer™ Plus is an advanced electronic pipette designed for simplicity, precision, and reproducibility. This innovative pipette facilitates a wide range of intelligent applications such as aspirating, diluting, sequential dispensing, and reverse pipetting, ensuring enhanced productivity and flexibility in the laboratory. It helps eliminate delays caused by complicated programming or inflexible processes, allowing for more efficient workflows. Key Features: Multifunctional Rocker: The “Up is up and down is down™” principle for intuitive operation, along with easy function selection via the practical selection dial. Intuitive Interface: Operate in your preferred language with a clearly arranged color display and no sub-menus. The integrated help function ensures that guidance is always available when needed. Innovative Rocker: When the tip is ejected, the piston automatically returns to its zero position, ensuring smooth operations. ON/OFF Switch: The pipette automatically switches off during longer periods of inactivity to preserve battery life. Advanced Applications: Additional functions such as aspirating, diluting, sequential dispensing, and reverse pipetting enable more complex processes with ease. One-Time Programming: Save your programming sequences for faster handling of complex pipetting tasks. Fixed Volume Settings: You can save your desired volume settings for quicker access during repetitive tasks. Password Protection: Secure your pipette settings with password protection to prevent unauthorized changes. Individual Speed Settings: Adjust the speed parameters to your individual working pace. Maintenance Reminder: Set reminders for pipette maintenance based on time or frequency of use. Reproducibility: Consistently reproducible results with volume and speed adjustments that remain precise and reliable. Ergonomic Design: PhysioCare Concept™ reduces weight and improves balance, offering an optimally angled pipette head for better comfort and ergonomics. Spring-loaded tip cone ensures a secure fit, providing maximum tightness. Clear Display: The high-resolution color display enhances visibility, ensuring that parameters are clearly visible at all times. Applications: Pipetting: Liquids (manual and automatic) Dispensing: Timed and manual dispensing Pipetting and Mixing: Ensures thorough mixing of liquids in addition to accurate pipetting

Condition: good (used), Year of construction: 2012, I sell the automatic pneumatic end cutting saw KuangYung PX60 CFS 200B, year 2012. Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table 9,20m 5 pcs. kickers on left outfeed table Dedpjppwx Ejfx Addjcr Total length: 15,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: used, This listing is for the Thermo Scientific™ F1-ClipTip™ 12-Channel Pipette The unit is in full working condition and is ready for immediate use The Thermo Scientific™ F1-ClipTip™ 12-Channel Pipette is a high-precision manual pipette designed for efficient and reproducible liquid handling in laboratory settings. It features Thermo Fisher's innovative ClipTip™ technology, ensuring secure tip attachment and ejection without the need for forceful insertion or removal. Key Features Number of Channels: 12 Volume (Metric): 30 to 850 μL Dcedpfxexv Di Ej Addor Increments: 1 μL Compatible Tips: ClipTip 1000 Color: Blue Model: Bluetooth* (see description section below for more details) Programmability: Yes Type: 96 format (designed for 96-well plate applications) Volume Range: 30 to 850 μL (with the ClipTip 1000) Tip Attachment: Tips lock securely in place with a light touch and remain sealed until intentionally ejected Ergonomic Design: Lightweight handle with a 120° adjustable finger rest for both right- and left-handed users Volume Adjustment: Secure volume lock to prevent drift during operation Warranty: Industry-leading lifetime warranty with convenient online registration Certifications: CE-marked in accordance with IVD Directive in Europe; manufactured according to ISO 9001, ISO 14001, and ISO 13485 standards Applications Ideal for applications requiring high precision and reproducibility, such as: Genomics and proteomics Microplate assays Cell culture and drug discovery High-throughput screening