Used Glue Tank for sale (14,728)

Year of construction: 2017, condition: used, Case maker Kolbus DA 270 Bookjet Edition Year: 2017 Equipped with: - Copilot system with touchscreen Hjdpfx Afszhwu Estjfl - Board magazine for manual loading - Cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - Miss cloth control during the separation process - Counter stacker delivery with following roller conveyor - Moveable gluing station for processing hot-glue with glue preparation unit in the premelter, heated glue application roller and scraper roller - Cloth cylinder with grippers and exchangeable plates for rubber pad (incl. 5 x 500 mm, 5 x 720 mm and 10 x rubber pad) - Viscosity control device for automatic water supply to ensure constant glue viscosity with pump and water tank for manual filling - Device for inside lining with hot-glue - Pressing roller device for crease-free connection of the cover material with boards and spine strip - Device for producing padded cases - Automatic case counter - Programmable automatic settings, motorized adjustments, indication of production faults - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D Special equipment: - without centre strip roll device (optional available new!) - With board centre strip magazine, boards height min. 130 mm - Board centre strip cutting device (cross centre strip) for processing digital print products of varying centre-strip, device for cutting rigid centre board strips to width, with possible width variation from cycle to cycle - Kolbus Turning Device WE 260, year 2017 (counter: only approx. 4,7 mio. book cases) Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 670 x 390 mm - Open cover size min.: 205 x 140 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width closed: 8 - 15 mm - Cloth width: 223 - 708 mm - Cloth height: 130 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm

Condition: used, Year of construction: 2019, Smart Touch Numerical Control with Sintra HD Software Panel height 10 - 60 mm 22 mm solid wood Pvc / Abs mm 3 Feed speed up to 25 meters / min Hfjdpfx Afsr Ip Sdstsl Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Motorized and electronically adjustable panel support guide by C.N. Side roller conveyor with idle wheels for panel support ADZ-700 anti-adhesive group Rectifier unit with 2 electronically adjustable motors by C.N FI-502 Lamps to heat the edge of the AdIRL-700 panel Reel holder plate at 1 position Gluing unit for EVA hot melt glue with QM-705 glue pot Additional glue tank Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. Anti-adhesive group End trimming unit with 2 IN-801 motors Offset trimming / gleaning unit with 2 motors electronically adjustable by C.N RF400 PRO-NESTING KIT for gleaning unit Non-stick group Rounding unit with 2 multifunction motors (gleaner + rounder) AR30 NC LPT-700 non-stick liquid application system Electronic edge scraper unit electronically adjustable by C.N RB400 PRO-NESTING KIT for edge scraper group RCC-701 glue scraper unit Brush group "SP-501" "PH-700" hairdryer group

Condition: used, mileage: 8,16,000 km, power: 324 kW (440.52 HP), first registration: 09/2009, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * MAN TGS 18.400 4x2 BL tanker truck * Automatic transmission * Willig body from 2008 * Euro 5 * 13,500 litres Hfodpeyf S Rwjfx Aftol * Haar pump * Sening Mutlifow counter * 2x discharge hoses * Additive system 40L * 2 compartments * 6,000L / 7,500L * Top/bottom filling * Intarder * Local distribution cab * Trailer hitch * Rear view camera * Alcoa aluminium rims * Auxiliary heater * Air conditioning * Heated seats * PTO (power take-off) * Leaf-air suspension * Radio/CD * 1st owner * Automatic transmission * 2 units available * Next tank inspection 09/26 * Leak and function test 09/29

Condition: used, functionality: fully functional, mileage: 9,56,923 km, first registration: 01/1995, fuel type: diesel, maximum load weight: 12,850 kg, overall weight: 18,000 kg, tire condition: 80 %, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: mechanical, suspension: air, number of seats: 2, total length: 6,650 mm, total width: 2,500 mm, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 1995, Equipment: differential lock, fog lights, SCANIA P 93.220 Bitumen tank CMR with asphalt spreader (body from 2011) 4x2 Air suspension Differential lock Manual transmission Gross vehicle weight: 18,000 kg Wheelbase: 3.80 m Tyres: 80% Sun visor Fog lights Round lights 300L tank Hedpey N Ud Njfx Aftsfl All information provided without guarantee/errors excepted.

Condition: excellent (used), functionality: fully functional, Working width: 800 mm Maximum element height: 100 mm Hfodpfxoz Agvhe Aftjl Manual adjustment of roller spacing Simultaneous application of adhesive to the top and bottom surfaces

Condition: used, Year of construction: 1999, machine/vehicle number: LC652, Used KRONES filling line for beer - glass - 24000 BPHTechnical Specifications & Performance DataThis used bottling line is a second hand complete glass beer bottling line engineered for industrial packaging and beverage production. It is configured around a Krones Mecafill VK2V filling monoblock and complemented by bottle washing, pasteurization, labeling, and crate handling equipment. The line is optimized for glass beer bottles and delivers reliable output with precise control of product quality parameters.Rated capacity: 24,000 bottles/hour at 0.5LCompatible formats: 0.33L and 0.5L beer bottlesContainers: GlassFilling monoblock: Krones Mecafill VK2V 066-103/KK (1999), 66 filling valves, double air evacuation, integrated rinser with 60 heads (pressurized water) and 11 capping headsLabeling: Krones Prontomatic 720-18-86-130 (1999), cold glue, front/back/neck applicationBottle washers: Krones KES-1-1-190/19-80 (1998, retrofitted in 2013) and Robak PBSzPasteurizer: Fischer (1999) HTST module; nominal 130 hl/h, 5°C inlet, 72°C for 30 s (30 PU), 11°C outlet; buffer tank 6,000 LElectrical & utilities (pasteurization system): 3x400V, 50Hz; compressed air 6 bar (dry, oil-free)Additional Fischer heat-exchanger modules: EUROPA 40PI and DUBACAL 400P plate pack references (PS 16 bar; plate pack Cmax 780 mm, Cmin 770 mm)Advanced Automation & Control SystemsThe line integrates robust automation for consistent, repeatable performance in beverage production. The pasteurization system is automatically controlled with supervisory monitoring of all key process variables, enabling precise quality assurance at high throughput.Monitored parameters: pasteurization temperature, holding temperature, inlet/outlet temperature, temperature and pressure during pasteurization, flow volume, pasteurizing units (PU), buffer tank level, and filling pressure after buffer tankOperating modes: manual operation with automatic control for stability and safetyElectrical specifications: 3x400V, 50Hz (pasteurization system)Quick changeover between 0.33L and 0.5L formatsProduction Line Integration CapabilitiesThis complete bottling line is engineered for inline operation and smooth integration between washers, filling, pasteurization, labeling, and crate handling. It suits breweries seeking an industrial packaging solution for glass beer bottles with stable, high-speed performance.Integrated bottle washers upstream for returnable glass handlingHTST pasteurization between filling and labeling for microbiological stabilityCold-glue labeling with multiple label positions (front, back, neck)Crate washer and crate load/unload equipment for returnable logisticsMachine TypeManufacturer / Model Hfjdpsziyyysfx Aftsl

Condition: used, mileage: 3,82,000 km, first registration: 03/1998, fuel type: diesel, fuel: diesel, Year of construction: 1998, MAN FE 18.264 FBL A3 tank truck for diesel and heating oil, 2 compartments, 10,250 liters !!TANK AND PUMP TRUCK!! !!TANK CLEANING VEHICLE + TANK TRUCK!! !!Very good overall condition!! Equipment of the truck: • EURO 3 + PMK • 260 hp • Engine displacement: 6,871 cm³ • 8-speed manual transmission - dual H-pattern • Cruise control • Engine brake • Differential lock Hfsdpfszyzwhox Aftel • Leaf / air suspension • Radio - CD player • On-board computer • Horn • Driver airbag • Sunroof • 1 x tank, 250 liters • Wheelbase: 3,900 mm • Unladen weight: 7,600 kg • Payload: 10,400 kg • GVW: 18,000 kg • Tires: 295/ 80 R 22.5 • Tire tread: 15/15 10/11 11/11 mm TANK BODY: ESTERER • Year of manufacture: 1998 • For diesel and heating oil • 2 compartments • 6,200 + 4,050 liters = 10,250 liters • FMC measuring system from Sening, type GMVT 703-J • TKZ system (temperature-compensated meter) • Printer • 2 x hydraulic hose reels • ADR compliant! • Tank inspection valid! Tank cleaning system: Küller Fahrzeugbau • Year of manufacture: 1998 • Water tank capacity: 1,600 liters • Test pressure: 4 bar - German vehicle! - MOT/TÜV: NEW! Subject to errors and prior sale.

Condition: good (used), Year of construction: 1970, Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, compressor tank, compressed air reservoir, compressed air storage tank, compressor tank -Manufacturer: Elektra-Beckum, compressed air tanks, compressed air storage Hfedpfx Aozyt Aveftsl -Contents: 1000 L -Operating pressure: 11 bar -Dimensions: 900/1000/H2350 mm -Weight: 322 kg

Condition: excellent (used), CATALOGUE NUMBER 8010 TECHNICAL DATA Equipment: - table - pre-milling - belt feeder - 2 glue tanks: for granules and cartridges - currently, the machine uses hot melt adhesive (granules) - guillotine – for pre-cutting veneer - 3 pressure rollers Hfedjzw Dx Ajpfx Aftel - 2 trimming units with saws for final trimming - 2 milling units for edge shaping (radius cutters) - corner rounding unit - sanding units – for removing excess glue - polishing units - stepless feed rate adjustment 8-18mm - workpiece thickness 6-45mm - minimum workpiece length 180mm - minimum workpiece width 600mm - maximum veneer thickness fed from a roll 3mm - air consumption 6-8 bar - dust extraction nozzle diameter 7x80mm, 1x130mm - dimensions L/W/H 6650x1260x1700mm - weight 1850kg ADVANTAGES – Made in Germany – Spray system – Pre-milling and corner rounding – 2 glue tanks – Includes 4 additional milling cutters – Unpainted – Original technical documentation and CE marking – Very good condition – Used veneer edging machine Net price: 49900 PLN Net price: 11880 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: good (used), Year of construction: 2014, functionality: fully functional, Technical Data Material: Printed or unprinted shrink films Film types: PVC, PET, OPS shrink film Film thickness: approx. 28–100 µm Minimum sleeve width: approx. 50 mm Maximum sleeve width: approx. 300 mm Maximum unwind diameter: approx. 600 mm Maximum rewind diameter: approx. 600 mm Sleeve width tolerance: approx. +/- 0.15 mm Outer web overlap: approx. 0–1 mm Glue position: Adjustable Maximum production speed: Up to 500 m/min Maximum sleeve roll weight: approx. 50 kg standard Power supply: 240 V / 50 Hz Compressed air: Minimum 6 bar, dry and oil-free, approx. 40 litres/min _____ Machine Configuration Based on available information, the machine is equipped with the following main units: Unwinding Section • Unwinding unit • Cantilevered unwind shaft • Pneumatic arm for supporting the master roll Hjdpfx Aezka T Aeftefl • Core adapter for 76 mm core diameter • Core adapter for 152 mm core diameter • Electromagnetic brake controlled by an ultrasonic sensor • Automatic web guiding with ultrasonic sensor Gluing / Solvent Application • Solvent application unit for gluing • Pressurized solvent tank • Speed-dependent glue quantity control • Adjustable glue seam position Sleeve Forming Section • Longitudinal pre-cutting / perforation unit with two perforation wheels • Semi-automatic forming tool for sleeve widths from approx. 50 to 300 mm • Adjustable guide rollers for sleeve forming • Roller sets for laying the film around the forming bar • DCM control system for sleeve width measurement Rewinding Section • Rewinding unit • Machine control cabinet • Touchscreen control

Condition: good (used), Code: 0414 Brand: SCM MINIMAX Model: ME 25 - CE Standard Automatic edge bander for joinery, furniture, custom-made furniture, panels, doors, kitchens and various – CE Standard – Year 2017 Technical data: Thickness of roll edge 0,4–3 mm Max edge thickness 5 mm Min/max panel height 12/50 mm Panel feed speed 7 mt/min Work surface height 904 mm Hedpezfapmjfx Aftsfl Min panel length/width 190/65 mm High-grip toothed feed belt Panel support roller conveyor along the entire length of the machine Composition: Gluing unit: Glue tank capacity 1 kg – Motor power 0,18 Kw End cutting unit: Motor power 0,37 Kw – End trimming blade diameter 90 mm Z 20 – Blade rotation speed 12000 rpm Overlapping trimming unit: Upper and lower motor power 0,75 Kw – Vidia cuttersn diameter 75 mm Z 4 – Cutter rotation speed 12000 rpm Edge scraper unit for finishing Pvc/Abs edges Glue scraper unit for removing any excess glue Suction inlet diameter 120 mm Overall dimensions mm 1950 x 700 x 1250 h Weight kg 430

Condition: new, This is a brand new binder, supplied in crate. The SpeedBind range of perfect binders meets the growing demand for professionally bound documents and books where quality presentation, quick turnaround, and ease of operation are essential. This SpeedBind 420 Pro offers the ability to produce A3/A4 Landscape/A4/A5 & A6 perfect bound books and documents. Key Features Colour touchscreen control for fast setup Adjustable spine clamping pressure and time Milling and notching spine preparation Combined spine and side gluing system Single glue tank for EVA adhesives Integrated paper dust extractor Fast warm-up time Output: up to 375–450 cycles per hour Padding mode for pad production Control System Operation is via an intuitive colour touchscreen control panel. All settings — including operation mode, glue temperature, clamp pressure, clamping time, and speed — are managed from the touchscreen. Setup is completed within seconds, ensuring consistent results across varying book sizes. Minimal operator training is required. Spine Preparation Spine preparation is performed using an extra-durable milling and notching disc equipped with: 20 milling teeth 2 notching blades Before glue application, the book block passes over the disc to break down paper fibres on the spine. This process allows superior glue penetration, improving binding strength and durability. Glue System The SpeedBind features a single glue tank for both spine and side gluing. Designed for modern high-strength EVA glues, it eliminates the need for separate adhesives, simplifying operation and maintenance. A tail structure stabilizes the glue layer on the spine before the book block meets the cover. Excess glue is removed automatically, ensuring precise application and clean, professional finishes. Clamping System The adjustable clamping station allows fine control of: Clamp pressure – prevents over- or under-clamping Clamping time – adjustable for different paper and cover materials This ensures a perfectly squared spine and consistently high-quality binding results. Dust Extraction An integrated paper dust extraction system is included as standard. During milling and notching, paper dust is collected in a cloth bag, reducing internal buildup and maintaining clean, reliable performance. Hodpjy Dr Hdjfx Aftjfl Padding Mode In addition to book binding, the SpeedBind includes a padding mode for producing pads and similar products, increasing production flexibility. Specifications Manufacturer Glendale Model SpeedBind 420 Pro Condition New Stock Number 114909 Mode of operation Manual, automatic & fast Max spine length 420mm Sheet capacity 2-60mm Production speeds 375-450 per hour Control panel 7" Colour Touchscreen Milling & notching 20 milling teeth and 2 notching blades Side Glue Yes Adjustable clamp pressure Yes Adjustable clamp time Yes Warm up time 25 minutes Dust extractor Included Electrical requirements 220-240v 50Hz Weight 285kg Dimensions L1600mm x D590mm x H1100mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Maximum panel thickness: 60 mm Edging unit Gluing unit with glue tank Trimming unit Rounding unit Edge scraping and gluing unit Brush unit "StarTouch" control system replacing Orion 110 Hedpfxjyziuts Aftefl Only 30,217 meters of edge material processed (statistics from 12.03.2026) 4,482 hours

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Item: F-4001-4008-Jacket40m3Vertical Used vertical jacketed insulated tanks Exterior dimensions: Diameter Ø 3565 mm, Total Height 6951 mm. Vertical, insulated stainless steel process tanks – 8 units. Cooling/heating jacket. Top-mounted agitator. Hjdpfx Afozg Daretjfl AISI 304

Condition: new, Year of construction: 2026, Feed speed 9 m/min Board thickness 12 - 45 mm Minimum board dimensions (L x W) 90 x 170 mm Worktable height 960 mm Table extension (steady rest) 560 mm Extension connector ⌀ 125 mm Installed power 6.1 kW Pre-milling 3000 rpm Front/back 12,000 rpm Top/bottom 12,000 rpm Polishing 3000 rpm Machine dimensions 3960 x 720 x 1748 mm Weight (net/gross) 800 / 950 kg Hedpszp Nz Hefx Aftofl Feed motor power 0.75 kW Glue tank heater motor power 1.315 kW Pre-milling motor power Milling 1.5 kW Plate heating motor power 0.125 kW Glue spindle motor power 0.25 kW Front/rear cutting motor power 0.37 kW Top/bottom cutting motor power 0.37 kW x2 Corner trimming motor power 0.37 kW Polisher motor power (top/bottom) 0.12 kW x2 (3-phase), 0.18 kW x2 (1-phase) Touchscreen control panel Air consumption 350 L/min Minimum extraction power 5 kW (for effective dust extraction from the edge bander)

Year of construction: 2023, condition: new, Tank & Environmental Protection Wozniack – Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank for storing heating oil. EN 12285-2 standard. Hfodpfx Afek Dpv Ajtel Nominal capacity: 10 cubic meters, new. EN 12285-2 standard. Color: Painted RAL 7035 Material: Steel, steel S235JRG2 Documents: Manufacturer’s certificate / Type plate 1 dipstick 1 vent pipe 1 fill pipe 1 new level sensor 1 new leak detection device 1 ladder 1 suction line Container dimensions: approx. 5,300 mm Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Storage: Above ground Delivery time: September Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Condition: excellent (used), Year of construction: 1997, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, Welfit Oddy ISO 20FT Tank Container 23,820L / 1-Compartment UN PORTABLE T11 Bottom discharge Steam heating 5-Year + CSC inspection valid until 09-2028 = Further Information = General Information Year of manufacture: May 1997 Model year: 1997 Suitable materials: Chemicals, construction water, fuel, waste water, and sewage Weights Tare weight: 3,820 kg Payload: 24,930 kg Gross vehicle weight: 36,000 kg Functional Interior capacity: 24,690 l Body manufacturer: Van Hool 24,690L TC, 2 compartments (12,290L/12,400L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Visual condition: very good Hfjdpfxezap R Rj Aftel Further Information Please contact Arne Honingh for further details.

Condition: new, Year of construction: 2026, Edge thickness 0.4 – 3 mm Glue board thickness 12 – 45 mm Difference between edge width and board thickness max. 4 mm Minimum length of glued boards 190 mm Minimum width of glued boards 90 mm Mechanical feed speed 7 m/min Glue temperature 130–250°C Tank capacity 1.2 l Pre-milling head speed 12,000 rpm Linear milling cutter speed 10,500 rpm Cutting blade speed 8800 rpm Polishing disc speed 2800 rpm Installed power 4.91 kW Hfedjzp Nycopfx Aftol Feed motor 0.75 kW Heating motor 0.25 kW Final cutting motor 0.18 kW Linear milling motor 0.55 kW Polisher motors 2 x 0.18 kW Pre-milling motor 0.5 kW Compressed air pressure 250 L/min Extended table width (steady rest) 560 mm Working table height 856 mm Shipping dimensions (L x W x H) 2820 x 720 x 1320 mm Net/gross weight 500 / 632 kg

Condition: as good as new (ex-display), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 140 mm, feed rate X-axis: 12 m/min, with approximately 4000 m of operating distance. Comes with a new machine warranty. The machine is sold without the depicted return system. The minimum workpiece width varies depending on the workpiece length, height, and surface quality: 70. Processing of roll material in thick PVC/ABS from 0.4–3.0 mm & strip material with a thickness of 0.4–12 mm. “e-motion” control system with an 18” touch-color screen with integrated maintenance software and available network connection. Stable machine stand made of steel. Extendable workpiece support facilitates working with large workpieces. Motor-controlled, positionable pressure bar with 2 offset arranged roller guides for even pressure distribution on the workpiece. Chain feed with rubberized support pads for optimal hold on the workpiece. Ball-bearing roller support plate with Ø 770 mm. Feed guide rail with sliding rollers for sensitive materials. Edge trimming unit with tool-controlled diamond cutters and 2 motors each with 1.5 kW, 12000 rpm. Chip removal is adjustable from 0–3 mm via motor-controlled positioning, including 2 diamond cutters Ø 80 mm, H 49 mm, Z2+2. Edge detection using an infrared sensor. Shear cutter for pre-capping thick PVC/ABS edge materials. Teflon-coated gluing unit with a capacity of 1.5 kg, application via a finely adjustable glue roller & quick-change system, as well as heating cartridge monitoring (~ 250 m/min per 1 kg of granules on a 19 mm board). Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges. Pneumatically tool-controlled gluing unit. Motor-controlled, positionable pressure unit with 1 large driven pressure roller and 2 conical follow-up rollers, pneumatically pre-tensioned. Cutting saw unit with 2 independent motors each with 0.50 kW, 12000 rpm, pneumatically swiveling 0–15°. Multi-function trimming unit for radius, flush and chamfer trimming of thin edges with 2 independent motors each with 0.75 kW, 12000 rpm, motor-controlled edge adjustment & pneumatic retraction function from the control panel. Corner processing unit for soft- and post-forming workpieces for processing the end edges with 0.4–3.0 mm edge thickness & 10–60 mm workpiece height. Hfedezcymhepfx Aftel 2-axis motor-controlled, positionable radius drawing blade unit including pneumatic retraction function. Polishing unit with 2 motors. Special equipment 020 Surface drawing blade, pneumatically tool-controlled 032 Spray device for cleaning agents before the polishing unit 042 Spray device for release agents on the machine infeed side (PUR adhesive) 046 Extended feed guide rail (+400 mm) 047 Edge trimming cutter with interchangeable inserts, 64 mm height instead of 49 mm, 2 motors each with 2.2 kW instead of 1.5 kW 051 Multi-function trimming unit with vertical multiple rollers for processing workpieces with pot-band holes 053 Spraying of lubricant Pneumatic-mechanical insertion lock to prevent premature feeding of the machine 059 Automatic lubrication for the chain conveyor 064 Pneumatic-mechanical insertion lock 067 Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges. 050A Additional interchangeable glue tank, counter-rotating 090 “classic” multi-function & radius drawing blade unit e-motion with radius 1+2 mm 071 Motor-controlled adjustment and positioning for corner rounding cutters 085 Preparation for u-motion professional 033 LED lighting 505 Exhaust distributor professional Includes delivery & inst

Condition: good (used), Code: 0458 Brand: ARTECH BIESSE GROUP Model: SINGLE 89-N - CE Standard Edge bander for straight and shaped panels , for edges in wood, veneer, PVC, plastic laminate etc. - CE Standard Technical data: Working height up to 120 mm Edge thickness 0,4 - 3 mm Minimum bending radius 20 mm Minimum panel length mm 300 Glue tank capacity 3 liters Motorized feed with adjustable speed Front extension for supporting large panels Work surface tiltable from 0 to 45 degrees Feed speed 4/16 mt/min with variable speed drive Trimmimg unit consisting of 2 superimposed motors Total absorbed power Kw 5,2 Working pressure bar 6 Overall dimensions mm 1300 x 900 x 1380 h Hjdpfsznu Dwex Aftsfl Weight kg 350

Condition: like new (used), Year of construction: 2019, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 34, Kolbus Casemaker, complete with pallet feeder type PPA290 Case – size range opened case (width x height) min. 300 x 210 mm, max. 1050 x 735 mm Cloth (width x height) min. 765 x 200 mm, min. 1080 x 290 mm Boards Thickness min. 1 mm, max. 4 mm Mechanical speed: Up to 40 cycles/min Board in-feed, Stiff spine in-feed, Flexible spine in-feed from roll, In-feed cloth, glue tank, glue rollers, pressing device, delivery belt Machine no: 34, Books produced: 2 million Hodpfswnqtkox Aftsfl

Condition: excellent (used), Becomix Stirring & Mixing Tank Electric lift lid Hjdpfxjx Dnkie Aftjfl Scraper and mixer motors 316 stainless steel 3000 lts capacity

Condition: used, Year of construction: 1995, Used machine Hfedpewpm Igsfx Aftel Year of manufacture: 1995 Equipment and technical data: Glue tank with glue roller Pre-cutting knife 4 pressure rollers 2-motor cutting unit Radius milling unit Flush milling unit Radius scraper Edge thickness: 0.2 - 6 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Shipping dimensions: 370x100x125 cm Weight: 1330 kg Location: Röllbach Availability: short term

Year of construction: 2013, condition: like new (used), We are offering 2 units of this new Selmi Tank 400 chocolate melting tank, manufactured in 2013. Manufacturer: Selmi Model: Tank 400 Year of manufacture: 2013 Hfsdpfx Aezvagyoftol Condition: like new Machine type: Chocolate melting tank If you have any questions or require further information, please do not hesitate to contact us.

Condition: new, Year of construction: 2026, A modern edge banding machine designed for the precise finishing of furniture panel edges. Equipped with robust units and advanced features, it ensures high quality, efficiency, and operational flexibility at speeds up to 12 m/min. An ideal solution for production facilities that prioritize quality and consistency. Edge Banding Machine for Furniture Panels FEATURES AND EQUIPMENT 1. Pre-milling – preparing the edge of the panel for gluing. 2. Standard glue unit equipped with a replaceable glue tank. 3. Trimming of edge ends – precise trimming of the beginning and end of the edge. 4. Finishing milling – perfect alignment of the edge with the panel. 5. Corner rounding. Hfodpfx Afszg Eq Sstjl 6. Sanding unit / wet polishing – perfect smoothing and polishing of the edge. 7. Capability to edge band panels with pre-drilled holes.