Used Glue Specification for sale (13,189)

Condition: excellent (used), CATALOGUE NUMBER 7554 Technical specifications: - Roller width: 1350 mm - Max. pass-through height: 70 mm Nsdszc Nmwopfx Aa Uswk - Glue application: single- or double-sided - 2-roller system - Diameter of glue application rollers (top/bottom): 160 mm - Main motor: 0.75 kW - Dimensions (L/W/H): 2000x750x1550 mm - Weight: approx. 534 kg ADVANTAGES – German manufacture – Used glue applicator – In very good condition Net price: 13,900 PLN Net price: 3,300 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: used, functionality: fully functional, machine/vehicle number: SBR-250, For sale: OSAMA SBR-250 glue roller Nodpjx Eyxqofx Aa Uswk The machine is fully operational and in very good condition. Ideal for gluing strips, sheets, panels, etc. Technical specifications: Working width: 230 mm Working height: 0 - 100 mm Applicator roller diameter: Ø 150 mm Feed speed: 28 m/min Motor power: 0.18 kW Working surface height: 790 mm Machine dimensions (width/length/height): 700 x 500 x 750 mm Machine base height: 1300 mm Net weight: 90 kg Available for inspection at Sitańcu 127, 22-400 Zamość You are welcome to view the machine

Year of construction: 2006, condition: good (used), FIN Glue spreader SC2R/1300 with 2 rollers The year 2006 manufacture: FIN s.r.l. Italy main technical specification: Width of working: 1300mm The maximum passage between roller: 120mm The diameter of rollers: 185mm Advancement speed: 19m/min Net weight 390 Kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 200 x 153cm Nwsdpfx Aajfguntj Uok 400 V, 50 Hz, 037 kW Accurate and uniform spreading with any type of glue, excellent technical characteristics, added to the high practicalness, functionality and safety for the operator, place it at the forefront among the 2 roller glue spreaders. Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are built with a rational layer of rubber it is, therefore, possible to carry out 6-7 grindings. It is easy and quick to disassemble. Spreading, precise and uniform on one or both sides of the panels. Special shock-absorbers, on the roller supports, allow the rollers an automatic opening depth, so as to spread panels of different thickness within 5 mm. they also compensate for eventual parallelism differences of the panel. Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction to allow cleaning. Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy cleaning. Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal protection prevents the introduction between the rollers of any object more than 5 mm. thick over the transit established, ensuring the maximum safety for the operator. Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer protection. Control panel, with starting button, stopping button and warning light (24 V). Rollers rotation chain with self-registrable turnbuckle pinion. Roller washing with a bored washing tube, for the water intake during this operation.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: Nedpfx Aasztl Scj Ujwk - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve Njdpfst Nfarjx Aa Ujwk • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, total length: 9,000 mm, working height: 120 mm, For sale: BARBERAN PUR-33-L profile wrapping machine (year 2010) – machine for laminating elements with decorative foil using PUR hot-melt adhesive (hot gluing). Nedoyw Nxkspfx Aa Uowk The machine features a single foil feeder, automatic control, and an added antistatic corona system (reduces electrostatic charges – improves foil feed stability). Technical specifications: Model: BARBERAN PUR-33-L Year of manufacture: 2010 Machine length: approx. 9 m Max. element width: 120 mm Feed speed: up to 45 m/min Power supply: 400V / 50Hz Foil feeder: 1 unit Equipment / additional features: Antistatic corona (retrofitted) – neutralizes foil static Printer – enables edge printing (e.g. strip name / operator / description) Glue melter with approx. 60L capacity – allows extended operation without interruption. Important: The machine applies PUR adhesive using hot-melt technology Heaters are NOT included in the set.

Condition: excellent (used), Price per unit. For sale: a professional glue roller / glue applicator from Tünkers GmbH, designed for precise application of glue onto paper, cardboard, corrugated board, leather, fabrics, and other flat materials. This device is suitable for bookbinding shops, printing houses, production facilities, and anywhere where uniform glue distribution is required. The machine is equipped with a system of working rollers ensuring even glue application and adjustment of the amount of material dispensed. The robust, cast iron construction guarantees high durability and stable operation for many years. Technical specifications: Manufacturer: Tünkers GmbH Type: Glue roller / glue applicator Machine number: 12/30274/22 Electric drive Rotation direction switch (left / stop / right) Adjustment of the amount of glue applied Two dispensing rollers Nwjdeziwunspfx Aa Uek Metal glue tank Adjustable work table Robust cast iron construction Made in Germany This device is ideal for working with glues used in bookbinding and packaging production. The visual condition corresponds to the photos.

Condition: used, 230 mm glue applicator, roller refurbished Nwedpfx Aaezdgbbj Ujk Specifications: • Condition – fully functional, after a comprehensive inspection • Working width – 230 mm • New rubber coating • One fixed speed • Manual height adjustment • 0.37 kW motor (1370 rpm) • Maximum working height ~ 200 mm • Overall dimensions: 80 x 60 x 75 cm (L x W x H) Additional information: • Very good technical condition, after a comprehensive refurbishment • The photos show the actual condition of the item for sale • The device can be switched on and tested on-site • The price listed in the auction does not include VAT and transport costs Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or a leasing loan

Condition: good (used), Code: 0397 Brand: ITALPRESSE Model: R4/130 - CE Standard Automatic 4 rollers glue spreader for vinyl glue (PVAC), urea glue (UF) and polyurethane glue, for various types of materials like MDF, chipboard, plywood, parquet, composite materials, plasterboards, furniture, panels, doors and various, building sector, sponges, mattresses, papermaking - CE Standard Nodpfx Aaezbmxuj Uowk Technical specifications: Working width mm 1300 Max working passage mm 100 Power 0,75 Kw Spreading rollers diameter mm 210 Variable roller feed speed Automatic rollers cleaning Motorised outfeeding discs Overall dimensions mm 2150 x 1100 x 1600 h Weight kg 750

Condition: used, Year of construction: 2009, Second-hand machine Year of manufacture: 2009 Condition: factory-refurbished by Osama Technologies Features and technical specifications: - Automatic gluing machine with two rollers - Working width: 1000 mm - Usable working thickness: 0–100 mm - Application rollers Ø 185 mm - Feed speed 24 m/min - Work surface height: 800 mm - Groove spacing between rollers: 2 mm - Motor power 0.37 kW - Glue distribution tank made of painted sheet metal - Water tank made of galvanised sheet metal Nwsdpfxszk Nxbe Aa Uok - CE marking - Voltage 400/50/3Ph Availability: at short notice Location: Röllbach

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: 3074, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, total height: 1,618 mm, total length: 4,984 mm, total width: 1,425 mm, overall weight: 1,400 kg, year of last overhaul: 2025, Equipment: CE marking, Due to the acquisition of a new machine, our reliable edge banding machine, purchased new in 2016, is now for sale. The machine has operated in a joinery workshop with 8 employees. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit has been re-sharpened. The glue roller’s clutch has been replaced. The glue pot was completely refurbished and cleaned. The machine is suitable for both EVA granulate (e.g., Henkel Dorus KS351) and PUR adhesives. The degree of pre-milling, the edge material thickness, and the position of the lower and upper milling tools can be conveniently adjusted from outside the machine housing via manual handwheels. The control system allows custom edge banding programs to be saved. The machine automatically and pneumatically switches between 0.4 mm and 2.0 mm edge banding via program. Main specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100–150 l/min) - Touchscreen - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness, in rolls: 0.5–3.0 mm Nwjdpfx Aaozhrdue Uek - Workpiece thickness: 8–60 mm (banding 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Processing units: - Diamond pre-milling (12,000 rpm) - Release agent tank/nozzle - Gluing station - End trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/nozzle - Flat scraper - Polishing wheel Price does not include VAT.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, year of last overhaul: 2025, For sale: Used, professional edge banding machine, Hebrock model AKV 3007 DK-F, manufactured in 2016, with additional equipment (detailed below). First owner. Overhauled last year (belt and drive rollers replaced, glue pot regenerated). The edge banding machine operated on one shift, 8 hours a day, from Monday to Friday. The machine is designed for efficient edge banding of furniture components with PVC, ABS, melamine, and veneer edges. This model is valued for its high-quality processing, robust construction, and the ability to operate in continuous mode. Nwedpfezizabox Aa Usk Price: 85,000 PLN net. Excellent condition - the machine is in full working order, regularly serviced, and ready for operation without any additional investment. VAT invoice 23%. Ready for pickup. The machine is available for viewing by prior appointment in Borów (83-332). Please contact us by phone for additional information, as well as videos and pictures of the machine in operation. Main parameters and specifications: - Gluing system: Top-mounted hopper for granules. The machine supports standard (EVA), polyurethane (PUR) glues, and zero-joint systems. - Edge dimensions: Edge banding from 0.4 to 3 mm thick on components from 10 to 60 mm thick. - Power supply and power: 400 V / 3 Ph / 50 Hz electrical connection. Maximum power consumption is 14 kW. - Aggregates: Equipped with a scraper, chamfering cutter, corner rounding cutter, profiling cutter, and polishing unit. - Additional equipment: Pneumatic edge alignment, optional interchangeable glue pot, front notching saw, free feed, front spraying, cleaning spray. Detailed description: Narrow band edge banding machine from the German company Hebrock with a system for applying glue to the edge of the component and edge banding with edges from 0.4 to 3 mm thick on components from 10 to 60 mm thick, as well as pre-milling the panel with diamond cutters. The machine is optimally equipped for each type of edge. The machine's equipment is fully utilized thanks to the computer and PLC control, which fully controls the individual aggregates. The patented Hebrock system in the edge milling aggregates (consisting of adjusting the lower and upper cutter from outside the machine – during operation), as well as the automatic adjustment between thin and thick edges, eliminates the need to open the rear housing, which results in significant time savings, comfort, precision, and user-friendly operation. Technical data: • Edge thickness: 0.4 – 3 mm • Component thickness: 10 – 60 mm • Max. edge height: 65 mm • Compressed air requirement: approx. 450 l/min • Feed speed: 7-11 m/min, 0.75 kW motor • Glue heating time: 6 min • Total power consumption: max. 14 kW • Electrical connection: 400V, 50Hz • Working height: 880 mm • Machine dimensions [mm]: 5850 x 1425 x 1520 • Machine weight: 1600 kg • Extraction nozzle diameter: ø 140 mm, • Required extraction performance: 24 m3/min • Min. air velocity in the extraction nozzle: 20 m/s • Required vacuum in the extraction nozzle: 1300 Pa

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, type of input current: three-phase, pressing force: 160 t, table length: 3,500 mm, total length: 4,650 mm, total width: 1,650 mm, total height: 2,550 mm, overall weight: 6,000 kg, operating temperature: 130 °C, opening width: 480 mm, plate width: 1,300 mm, temperature: 130 °C, Equipment: hot water, ORMA NPL-8-160 Shelf Press Specification: • Condition - used, fully serviced • Manufacturer - ORMA • Model - NPL-8-160 • Shelf dimensions: 350 x 130 cm • Maximum clearance between shelves: 480 mm • Straight, clean shelves with no dents or damage • 8 cylinders, each 85 mm diameter • Maximum pressure: 350 bar • Maximum pressing force: 160 tons • Option to operate with only central cylinders (for short workpieces) Nwsdpfxoxdxwao Aa Uek • Automatic repressurization in case of pressure drop • Glue curing timer with automatic shelf lowering • Shelves suitable for water/glycol or oil heating • Circulating pump and heating boiler included • Maximum heating medium temperature: 130°C • Equipped with a safety wire (emergency stop) • Original paint, all parts original • Weight approx. 6000 kg • Year of manufacture: 1991 • Overall dimensions: 465 x 165 x 225/255 cm (L x W x H / H with collection tank) Additional information: • Perfect, factory-grade technical condition • Photos shown represent the actual condition of the item for sale • Demonstration and inspection of the machine on-site possible

Condition: good (used), Year of construction: 2011, machine/vehicle number: AH005553, functionality: fully functional, total length: 8,100 mm, overall weight: 4,000 kg, Main specifications: * Panel thickness: max. 60 mm * Edge thickness: 0.4 - 3 mm (Solid wood up to 12 mm) * Feed speed: up to 25 m/min * Glue system: EVA / PUR Configuration: * Pre-milling unit * Gluing unit with pressure rollers * End-trimming unit * Top/Bottom trimming unit (rough & fine) * Corner rounding unit * Radius edge scraper * Glue scraper Nedpfx Ajzvb Uxoa Uswk * Buffing unit Machine Condition: * Excellent working condition. * Regularly maintained. * Available for inspection and testing while powered on.

Condition: excellent (used), For sale: a glue roller from Karl Tränklein, a renowned German manufacturer of bookbinding machines. This device is designed for the precise and uniform application of glue to paper, cardboard, corrugated board, veneer, and other flat materials. The machine is equipped with an electric drive, a metal working roller, and adjustable glue application settings, allowing the operating parameters to be adapted to the type of material being processed. Its robust, heavy-duty construction ensures stability and long-term durability. Technical specifications: Manufacturer: Karl Tränklein Country of origin: Germany Type: glue roller / applicator Drive: electric Power supply: 400 V Adjustable glue application Metal working roller Work table with guides Nwedpeziwx Tjfx Aa Uek Drip tray for excess glue Heavy-duty, robust construction Applications: bookbinding, printing, packaging production, gluing paper, cardboard, and corrugated board, applying glue to veneer and other flat materials. Condition: used, fully functional. It shows normal signs of wear and tear from use. The visual condition and completeness are consistent with the photos.

Condition: used, Year of construction: 2014, functionality: fully functional, Equipment: CE marking, OTT TWISTER Edge Banding Machine This is a single-sided edge banding machine, operated from the right side, designed for applying and processing edges made of veneer, plastic, and solid wood. Year of manufacture: 2014 1. Technical specifications and dimensions: • Banding thickness: 0.4 – 10 mm. • Part width: minimum 70 mm. • Part height: 8 mm to 60 mm. • Part length: minimum 150 mm. • Continuous speed: 18 m/min. • Working height: 880 mm. • Machine dimensions: height 1,600 mm, width 1,100 mm, length 7,200 mm. • Weight: 3,250 kg. • Operating voltage: 400 Volt, 50 Hz. 2. Key working units: • Pre-milling unit: equipped with 2 motors (2.2 kW, 12,000 rpm) for milling the front surface. • Glue application (Vario-Melt): application roller with dosing automation and modular Combi Melt system for EVA and PUR adhesives. • K13 trimming unit: 2 motors (0.2 kW) for precise edge trimming with a tilting option of 0/5°. • Rough and fine milling unit: for processing edge overhang and radius milling. • AKF copying milling cutter: automated unit for longitudinal and corner processing with a function for veneer and postforming. • Scraping units: includes a radius scraper ZKc (for PVC edges) and a surface scraper ZKf (for removing excess glue). Accessories • PUR package: includes a quick-change head and a hopper. OTT TRANSLIFT Transport System This system is used for automatic handling of parts and returning them to the operator. • Manipulator: single-column, with suction, maximum load capacity 60 kg. Nwjdpfxozr Nkgj Aa Ujk • Movements: rotation 0°/90° and transfer to the return belt. • Return conveyor belt: width 900 mm, length corresponds to the machine. • Part limits: maximum length 3,000 mm, maximum width 1,300 mm.

Year of construction: 2013, condition: used, This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details. For inquiries: Zoltán Utasi Plus 36 30 205 7380 • Press table dimensions:ca. 3450 mm long × 1450 mm wide. • Bonding area (electrode area): 3000 mm long × 1300 mm wide. Nodpfszn N Ecox Aa Uswk • Maximum workpiece thickness: 130 mm. • The top pressure is provided by 8 hydraulic cylinders with Ø50 mm bore, arranged in two rows. • Side pressure is provided by 24 hydraulic cylinders with Ø50 mm bore, arranged in one row at 144 mm centers. This cylinder arrangement is required to achieve maximum pressure over the entire 130 mm glue line thickness and 3450 mm length. • Side pressure is continuously adjustable. • Recommended side pressure: o Softwood: 18–20 kp/cm² o Hardwood: 20–23 kp/cm² • The hydraulic power unit is equipped with a variable-displacement axial piston pump. • Maximum hydraulic pressure: 200 bar. • The PP sheet covering the press table is replaceable. It protects the expensive aluminum electrode from wear and significantly reduces cleaning time. • The press is suitable for producing laminated timber panels up to 6000 mm long in two pressing cycles. • Motorized loading table with a usable length of 3000 mm, providing easy material handling. • The loading table is equipped with rollers spaced at 250 mm intervals. • The loading table incorporates 4 transverse chain conveyors. During transverse material transfer, their upper level is raised to the roller level by 6 pneumatic cylinders. • The guide rails and drive for the transfer carriage are located above the loading table. • The steel unloading table has a length of 3000 mm. • The unloading table is equipped with rollers spaced at 300 mm intervals. • Material flow is from left to right. The loading table is located on the left side of the press, while the unloading table is located on the right side. • The conveyor-type glue applicator is positioned before the loading table. Conveyor width: 250 mm. Infeed section: 1500 mm long. Outfeed section: 3500 mm long. The glue applicator includes a removable glue reservoir. • A limit switch is installed at the end of the conveyor to prevent workpieces from falling off. • A movable roller table is positioned before the conveyor for applying adhesive to long workpieces. • RF Generator and Electrical Specifications • The integrated 30 kW radio-frequency (RF) generator is capable of curing approximately 2 m² of glued surface per minute when using PVA adhesive and timber with a moisture content of 6–8%. • The RF generator is easily tuned using an adjustable vacuum capacitor. • Power supply: 3 × 400 V, approximately 45 A. • The anode main switch and the control system main switch are located at the front of the press for easy access. Press Control, Monitoring, Operating Cycles and Safety Features • The control panel includes an anode current meter, grid current meter, glue curing timer, cycle indicator lights, press control buttons, fault indicator lamps, and an audible alarm. • The press closes in manual mode using a two-hand safety control system. • Equipped with an emergency stop safety system. • The press door includes an alignment cycle to assist in positioning the timber before pressing. Specifications are provided for information only.

Condition: used, Year of construction: 1998, machine/vehicle number: CC20, Hot-melt Case Sealer – OverviewThis used hot-melt case sealer by TE-CO is engineered for end-of-line industrial packaging within a used bottling line. The model 607-98 provides reliable, consistent closure of corrugated cartons using a hot-melt adhesive system, making it a proven solution for beverage production environments where wine bottles in cases must be sealed securely prior to palletizing. With robust construction and straightforward operation, it integrates seamlessly with upstream case packers and downstream palletizers to support continuous operation and optimized throughput.Manufactured by TE-CO, this second hand unit focuses on dependable carton closure, ensuring clean glue application, tight seals, and minimal maintenance demands. It is especially suitable for cases containing glass bottles in common formats used by wineries and beverage producers. Designed to work as part of a complete used bottling line or as a stand-alone machine with compatible conveyors, the 607-98 aligns with industrial packaging best practices for efficiency and product protection.Technical Specifications & Performance DataManufacturer: TE-COModel: 607-98Year of manufacture: 1998Speed: 6.000 BPH ( bottle per hour)Sealing method: Hot-melt (glue) adhesiveApplication: Case/carton sealing after case packingTypical use: Wine bottle cases within a used bottling lineCompatible bottle formats in cases: 0.75L, 1.0L, 1.5LConstruction: Industrial end-of-line machine for continuous operationOperation: Inline with case packer upstream and palletizer downstreamAdvanced Automation & Control SystemsThe TE-CO hot-melt case sealer is designed for dependable automation in industrial packaging. Typical features include adhesive temperature control for consistent bonding, synchronized infeed and outfeed for smooth case flow, and safety interlocks for protected operation. Operator-friendly controls support quick adjustments and stable performance during format changes. The hot-melt application system helps deliver clean, repeatable glue patterns to ensure secure, uniform sealing.Production Line Integration CapabilitiesThis case sealer integrates naturally into a used bottling line, operating immediately after a case-packing monoblock and before palletizing. It can be synchronized with upstream equipment such as erecting and packing systems and connected downstream to palletizers for automated material handling. The machine supports inline operation with standard conveyors and can run as a stand-alone sealer when properly fed.Machine Condition & Maintenance HistoryThe machine is presented as ready for operation within a second hand used bottling line context. Safety features and documentation are available, supporting commissioning and routine maintenance. Its industrial build promotes reliable service in beverage production environments.Operational Performance & VersatilityOptimized for sealing cartons that contain glass bottles, this TE-CO 607-98 suits wineries and beverage producers requiring secure hot-melt closure. The adhesive system promote... Njdpfx Aaoxywf Io Uowk

Year of construction: 2022, condition: used, Year: 2021/2022 Condition: very good, functional Counter: 13M envelopes Machine Type: Automatic mailing and fulfillment line for collating, inserting and sealing envelopes with the capability of processing rigid and thick products. - Manufacturer: CMC S.p.A., Italy - Model: CMC Smart Mailer / Rigid Mailer Special Technical Specifications: - Maximum mechanical speed: up to 4,000 envelopes/hour - Envelope width: 250–350 mm - Envelope length: 280–350 mm (including flap) - Product thickness: min. 2 mm / max. 25 mm - Recommended envelope flap height: 50–70 mm Configuration: - 2× A15 – Electronic hopper feeders for rigid and thick products - A21F – Photocell-controlled thickness gauge - 3× A14Q – Sheet feeders for inserts - SEP1 – Rotary separation disc - F15 – High-speed sheet feeder - A14_Env_L – Large envelope feeder - Vacuum Belt – Vacuum conveyor - HM1 – Automatic programmable hot-melt gluing system with 1 glue gun - RA20_i – Conveyor for collation of staggered products - PC_Add Special – Software for print verification, barcode reading and database management Nwjdpfx Aajztc Afs Usk - 2× SDC – Sound-deadening boxes for vacuum pumps - F15 High-Speed Sheet Feeder - Minimum format: 80 × 110 mm - Maximum format: 210 × 300 mm - Minimum paper weight: 70 gsm - Maximum product thickness: 2 mm - Loading capacity: up to 500 sheets - Double-sheet detection system - Brushless motor drive - A15 Hopper Feeder - Product length: 120–320 mm - Product width: 100–300 mm - Product thickness: 1–25 mm - Suitable for rigid products, stitched products and bound booklets. - A14Q Sheet Feeder - Product length: 100–210 mm - Product width: 110–300 mm - Product thickness: from 1 sheet (70 gsm) up to 4 mm - Minimum paper weight: 70 gsm - Utilities - Main power supply: 14 kW, 400 V AC, 27 A, 3-phase + N + PE - Auxiliary power supply: 3 kW, 230 V AC, 15 A - Compressed air: approx. 600 l/min at 6 bar - Clean, dry and oil-free compressed air required. Machine Dimensions: According to the machine layout, the main production line has an overall length of approximately 10,100 mm with a maximum overall width of approximately 4,300 mm. The layout is indicative and subject to final machine configuration. Machine Description: The CMC Smart Mailer is a high-performance automatic mailing and fulfillment system designed for collating, verifying, inserting and sealing envelopes. The machine is capable of processing single sheets, inserts, stitched brochures, bound booklets and other rigid products up to 25 mm thick. Equipped with automatic thickness control, double-sheet detection, barcode reading, print verification, database management software and programmable hot-melt gluing, the Smart Mailer ensures maximum production efficiency, accuracy and reliability. With a mechanical speed of up to 4,000 envelopes per hour, it is an ideal solution for direct mail, transactional printing, fulfillment and document mailing applications.

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked Nsdpfx Aeu R S Nwja Ujwk - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: like new (used), A company is selling a wide variety of items due to liquidation. Machinery and miscellaneous items! Check out my other listings too! Njdpey Ahixsfx Aa Ujwk . A custom-made adhesive dispenser for sale. Works perfectly. Features multiple adjustment options.

Condition: good (used), Year of construction: 1995, Kuper veneer zig-zag splicer machine, type FW/ 1200-E year of manufacture 1995 S/N 3508 3179 Specific features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely variable width of zig-zag pattern glue thread cutting device max. veneer thickness : 3,0 mm min. veneer thickness : 0,3 mm glue thread with hot air heating Compressed air discus for transporting the veneer over the veneer table control via foot pedal feed speed : 35-60m / min Volt: 400 V, 50 Hz Total power 1,35 kW working height 915mm weight approx. : 440 kg Dimension : 2,12m x 0,73m x 1,55m Njdohbp Ifspfx Aa Ujwk

Condition: used, Year of construction: 2013, Used Machine Year of Manufacture: 2013 Features and Technical Specifications: - Control system with 15-inch touchscreen - Pre-milling unit with 2 milling heads - Edge feeding unit - GluJet 301 glue application system: 2.3 kW, automatic glue height adjustment, sensing nozzle - Press unit: pneumatic - Crosscut unit: pneumatic - Diamond cutters (left and right): with CM technology - Corner copying unit with diamond cutters - Surface scraper - Sanding unit - Extendable workpiece support - Motorized pressure bridge adjustment with NC axis via program control - Exhaust hoods for trimming unit - Multifunction milling unit: MOT 4 - Vertical feeler rollers: pneumatic - Pneumatic swivel mechanism for MOT 4 milling unit - MOT 2 planing unit with chip collection box - Spray system for the infeed and outfeed areas - Minimum workpiece length: 160 mm - Workpiece thickness: 6–60 mm Nsdezk N Dkjpfx Aa Uewk - Edge thickness: 0.4–6 mm - Feed speed: 10 m/min - Overall length: 4930 mm - Weight: 1420 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, milling height: 180 mm, WEINIG NKT Dovetail Joint Line, Double Pack DP20 An industrial dovetail joint gluing system – developed for maximum precision and efficiency. Technical Specifications: Wood input length: min. 130 mm | max. 1000 mm Wood output length: min. 3700 mm | max. 7400 mm (saw included = half lengths possible!) Wood cross-section: min. 20 x 40 mm | max. 80 x 180 mm Cutter diameter: 370 mm Dovetail configuration: Vertical / Horizontal, 10/11 dovetails, 3.8 mm pitch Glue application: 2-sided, PVAC wood glue Connected load: 80 kW Note: The machine is currently disassembled and is in our warehouse. An inspection is possible by appointment. Scope of delivery: WEINIG NKT Double Pack DP20 incl. control unit Integrated gluing station for 2-sided application Operating manual & documentation Hydromat 17B (7 spindles) General information Manufacturer: Weinig AG Model: Hydromat 17B // 7 spindles (various tools) Type: High-performance profiling milling machine / planing and rabbeting machine Year of manufacture: 1989 Operating voltage: 380 V / 50 Hz Bottom-Right-Left-Right-Left-Top-Bottom table, fixed Description Heavy-duty, high-performance planing and rabbeting machine made of vibration-dampening and torsion-resistant cast iron components in a modular system. Designed for precise and economical woodworking with high continuous performance. Mechanical feed, adjustable in the range of 5 – 35 m/min, feed motor 5.5 kW (7.5 hp). Surfacing table 2 m long, quick adjustment available. Chip removal for surfacing and jointing spindles, adjustment range 10 mm each. Technical data • Feed speed: 5 – 35 m/min, mechanical • Feed motor: 5.5 kW / 7.5 hp • Operating voltage: 380 V / 50 Hz • Table length: 2000 mm Nedpfxjzwp Ucs Aa Uewk • Adjustment range for chip removal: 10 mm (surfacing and jointing side) • Machine design: Without counter bearing, in high-performance design

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: Machine with PLC control Feed rate: 12/16 m/min Nwedszk N Hrspfx Aa Usk Edge feeder for roll and strip material, automatic 1901 Glue application unit, cartridge 1906, with sensing nozzle Pneumatic pressure unit, motorised adjustment to edge thickness 1926 Trimming unit, twin-motor, pneumatically swivelling 1918 Rigid milling unit up to 30 mm, 1962 MOT 5 milling unit with multifunction capabilities: flush, radius, chamfer, 1966 Radius scraper 1927 Corner copying machine 1983 Surface scraper 1964 1944 sanding unit Blow moulding nozzles Technical specifications: Workpiece thickness min./max.: 6/60 mm Workpiece width min. 60 mm Minimum workpiece length: 140 mm Maximum gluing thickness: 13 mm Weight: 1,350 kg Machine dimensions: 5850 x 1000 x 1750 mm Location: Röllbach Availability: at short notice