Used Golf Course Maintenance for sale (7,914)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 35,000 h, travel distance X-axis: 1,140 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 810 mm, controller manufacturer: MITSUBISHI, controller model: M720 SSS, table load: 850 kg, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis Pinnacle BX300A was manufactured in 2012. It features a spindle speed of 15,000 rpm, a table size of 1300 × 610 mm, and a 24-position tool magazine. Equipped with a Mitsubishi M720VS control system, it supports complex machining with continuous rotation on the C-axis and tilting on the B-axis. Consider the opportunity to buy this Pinnacle BX300A vertical machining centre. Contact us for more information about this machine. Additional equipment Ndjdjz Ea Sxjpfx Ab Uob • Air blast through spindle • Rotary table with counter-support and hydraulic lock – 360° rotation • Heidenhain linear scales on X, Y, Z axes; rotary encoders on A and C axes • Coolant through spindle, 20 bar + low-pressure cooling system • Renishaw OMP60 workpiece probe + receiver // Renishaw TS27R tool probe • Chip flushing system • Chain-type chip conveyor • Telescopic covers for X, Y, Z axes • Full machine enclosure with safety door lock • Central lubrication system with oil cooler Machine Benefits Qualitative Machine Benefits • Condition: very good, low operating hours • Ready for tests Technical Machine Benefits • B-axis (tilting head): –120° to +120° • C-axis (rotary table): 360° continuous rotation • 24-position drum-type tool magazine • Table size: 1300 × 610 mm Extra Information Additional equipment Work area lighting Signal tower Air and coolant guns MPG handwheel Electrical cabinet cooling with air conditioner Temperature control system for spindle and ball screws Coolant oil separator Maintenance tool set

Condition: new, Year of construction: 2024, SCHORR track dumper with tipping hydraulics and ride-on platform 500 kg load capacity 9.2 hp engine -- Self-propelled & powerful caterpillar drive -- Large & high-quality tipper body -- Folding ride-on platform fitted as standard -- Width of only 680mm -- Top price-performance ratio -- NEW & IMMEDIATELY AVAILABLE! The SCHORR track dumper RR500DHKA has a hydraulic tilt drive and a payload of 500 kg as well as a powerful 9.2 HP single-cylinder 4-stroke gasoline engine. Thanks to its slim design (680 mm), the minidumper can also drive through narrow paths and doors, making it an extremely flexible means of transportation. Thanks to the minidumper's powerful track drive, you can also overcome rough terrain, inclines and kerbs with ease. The rubber tracks provide a secure footing in any working area. Lifting and lowering the tipper body is effortless and requires little effort thanks to the hydraulic tipper drive, even when fully loaded. Another advantage of the minidumper is its extra-large hydraulic oil tank with oil filter. This ensures a long service life for the machine and minimizes maintenance requirements. With a robust body made of thick sheet metal and a straight outlet that ensures quick and easy draining, this dumper is a must for anyone who needs to transport heavy loads. Even tipping on slight inclines is no problem. The large tipping angle ensures that even fully loaded skips are emptied completely without you having to help manually. This saves time and effort and makes the minidumper an indispensable tool for anyone who values efficiency and performance. SCHORR minidumper - The advantages at a glance: -- Self-propelled & powerful caterpillar drive -- Large and high-quality tipper body -- Folding ride-on platform fitted as standard Technical data: Load capacity: 500kg Ndjdpfx Aomv Evrsb Ueb Weight: 280kg Tilt drive: Hydraulic Engine: 9.2 HP (Loncin, 270cc) Starter: Cable starter Length: 950mm Width: 680mm Height: 465mm Tire size: 180mm Pump flow rate: 9 L/min. 3 forward gears 1 reverse gear Removable trough Type of packaging: Plywood box Packaging size: 167x77x113cm Our minidumper is extremely maneuverable and is often used on construction sites, in agriculture and forestry or in gardening and landscaping as well as for conversion work. Of course, we always have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. In order to make collections and inspections as convenient as possible for you, we would like to point out that these are only possible by telephone appointment. Would you prefer to finance or lease the appliance? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our minidumpers. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 89257, saw blade diameter: 450 mm, cutting height (max.): 150 mm, cutting width (max.): 250 mm, type of input current: three-phase, year of last overhaul: 2024, table length: 25,000 mm, A woodworking company in Latvia is offering a Weinig Dimter OptiCut 304 L optimization cross-cutting line for sale. The machine has had only two owners, both of which are well-known companies in Latvia. We have operated the machine ourselves for the past 8 years. The reason for sale is the recent purchase of new Weinig equipment. The machine is in full working order and is currently stored in a heated facility, ready for its next owner. The machine has only been operated on one shift. It is equipped with 5 sorting cylinders; however, the sorting conveyor can be extended, and additional sorting cylinders can be installed if required. The machine can be inspected and demonstrated in operation at our facility. Njdpfxjz Arqkj Ab Usdb Regular maintenance and repairs have been carried out throughout its service life to ensure maximum productivity, profitability, and high-quality optimization results. The machine operates with excellent accuracy. No modifications have been made to the original factory configuration. Spare parts have been regularly sourced from the official Weinig dealer in Latvia. The machine is available for inspection and testing in Kuldīga, Latvia. All original Weinig manufacturer documentation is available. Some spare parts are also available for this machine. We are also selling a Weinig finger-jointing line that was purchased together with this machine. Please see our separate advertisement for details. For further information, please contact us by phone or email, and I will provide all technical information, or additional images and videos can be made available.

Condition: used, mileage: 2,08,000 km, power: 103 kW (140.04 HP), first registration: 01/2013, fuel type: diesel, overall weight: 3,000 kg, color: blue, gearing type: mechanical, emission class: euro5, number of seats: 8, total length: 4,991 mm, total width: 1,904 mm, total height: 1,990 mm, Year of construction: 2012, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, For sale is a Volkswagen T5 Caravelle 4 Motion with the globally popular 2.0-liter diesel engine. The vehicle is in good condition! * German vehicle * Euro 5 emission standard * Second owner * Maintained according to service schedule * M1 passenger car registration Equipment: Caravelle * 4 Motion 4x4 all-wheel drive * Air conditioning (front + rear) * Auxiliary heater * Tow hitch * Heated exterior mirrors * Power exterior mirrors * Power windows * Central locking * and more... Technical data: Permissible total weight: 3000 KG Nsdpfxezwbt Ro Ab Usdb * Unladen weight: approx. 2130 KG * Payload: 870 KG * Trailer load: 2500 KG Why we are the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair prices * Transfer license plates (5-day/customs registration) usually on the same day * Airport or train station pick-up service All vehicles are professionally detailed and hygienically cleaned! The highlights: Disinfection of the interior and ventilation system using ozone cleaning. Two-stage polishing on the exterior. * If necessary, paint correction and smart repair. All our vehicles have also undergone thorough maintenance. Of course, this includes new fluids, filters and other expenses that you shouldn't have to worry about. Optionally, we can have the vehicle inspected at an independent testing center or workshop of your choice. We look forward to your interest and are available to you around the clock. If you have any questions, comments or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found on Special equipment: 2nd battery 80 Ah, 2nd battery, Audio system RCD 210 (radio/CD player with MP3 playback function), Electrical package 1, Exterior mirror, electrically adjustable and heated, Window in the cargo/passenger compartment: - sliding, 1st row, right, Paint: metallic paint, Multi-function display / on-board computer, Instrument cluster 2 display instruments, Smoker's package, Spare wheel in driving condition, Seat package: 8-seater, 2-3-3 (2 single seats, 2-seater bench and single seat, 3-seater bench), Seats in the cargo/passenger compartment: 1st row, 2-seater bench + 1 single seat, Bumper painted, Auxiliary heater (hot water), 2nd battery Additional equipment: Airbag driver/passenger side, Design: Caravelle, Exterior mirror, aspherical, left, Exterior mirror, convex, right, Floor covering in the driver's cab: rubber, Floor covering in the cargo/passenger compartment: rubber, Window in the cargo/passenger compartment: - fixed, rear left, Window in the cargo/passenger compartment: - fixed, rear right, Window in the cargo/passenger compartment: - fixed, front left, Rear door with glazing, Rear window, heated, with wiper, Heating in the cargo/passenger compartment, Interior release for tailgate/rear wing doors, Interior filter: pollen filter, Isofix mounts for child seat in the rear seat, Body/structure: bus, Body variant: normal roof, Child lock in the cargo/passenger compartment, Make-up mirror, left, Make-up mirror, right, Engine 2.0 Ltr. - 103 kW TDI, Wheelbase 3000 mm, Low emission according to emission standard Euro 5, Headlights H4, Sliding door cargo/passenger compartment left, Sliding door cargo/passenger compartment right, Seat cover / upholstery: fabric, Seats in the driver's cab: driver's seat, height adjustable, Seats in the driver's cab: lumbar support

Condition: new, power: 132 kW (179.47 HP), fuel type: diesel, color: white, gearing type: automatic, number of seats: 18, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Opel Movano coach/school bus (identical to Fiat Ducato) / coach, several vehicles available immediately Stock vehicle / warehouse vehicle, immediately available Different equipment lines Conversion as follows: - Acoustic and thermal insulation from the passenger compartment - Tinted glass (grey/black) in the original opening - 16 reclining seats plus a single passenger seat + driver's seat = 18 total, also available with a double passenger seat, then a total of 19 - (Of course, the vehicle can also be configured with 16 seats for driver's license D 1) - Optionally, a passenger seat or a small table can be mounted next to the driver's seat. - Convector heater in the passenger compartment - Air conditioning in the passenger compartment, optionally with a second compressor - Multi-level night lighting (white/orange) - Roof hatch - Electric drive for the original sliding door - Electric step at the original sliding door - On request, also possible with an electric exterior swing door - Reinforced rear axle Optional: On request, available as a Fiat Ducato, Citroen Jumper, Peugeot Boxer, or Opel Movano. Various equipment lines in stock. - Electric middle door + EUR 2,000.00 - Double-width middle door + EUR 3,000.00 (loss of 1 seat) - 5 standing places Nsdpfx Abjz Eykuj Ujdb - Automatic transmission - 180 hp Base vehicle with air conditioning, manual transmission, parking assist system with reversing camera, radio with hands-free system, multi-function steering wheel, etc. Wheelbase 4035 mm Overall length 6223 mm Height 2522 mm Width 2050 mm Permissible total weight 4500 kg !! Special equipment: Airbag driver/passenger side, Cool & Sound package, electric interface for additional conversions, driver assistance system: ParkPilot system with reversing camera, lighting package 1, tire repair kit, seats in the cab: adjustable single passenger seat, seats in the cab: heated driver's seat Additional equipment: Exterior mirrors, single tires on 2nd axle / rear axle, driver assistance system: side wind assist, generator 185 A, rear wing doors with tinted glass (opening angle 180 degrees), high roof H2, permissible total weight 4.25 t, body/structure: box high-roof, body variant: vehicle length L4, body variant: high roof (H2), fuel tank: 80 liters, adjustable steering column (steering wheel), headlight range control, model upgrade, engine 2.3 liters - 103 kW CDTI, pollen filter, long wheelbase, low emission according to emission standard Euro 6e-TEMP, sliding door loading/passenger compartment right, side marker lights, visibility package, steel rims 6.5x16, daytime running lights LED, permissible total weight 4.25 t, speed limitation 90 km/h Net export possible All information without guarantee These are German vehicles / no re-imports. On request, also available as a Citroen/Peugeot/Fiat Ducato or Opel Movano. We make shipments worldwide.

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00702, load capacity: 20 kg, arm reach: 1,811 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-20iA manufactured in 2012.01. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iA Model Number: A05B-1222-B202 Year of Manufacture Robot: 2012.01 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1811 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.01 Ndedpfx Abjz Et Exo Ujb RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Canon imagePROGRAF GP-4000” large-format printer Item for sale: 1 x Canon imagePROGRAF GP-4000 with the following specifications: incl. roll unit incl. roll holder set incl. WT36-600 Not the right configuration? We can easily configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! Ndodpfsz Et T Njx Ab Usb A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 8,632 h, load capacity: 4,000 kg, lifting height: 6,800 mm, free lift: 2,060 mm, fuel type: gas, mast type: triplex, construction height: 3,280 mm, fork carriage width: 3,100 mm, fork length: 1,150 mm, empty load weight: 6,100 kg, total length: 2,620 mm, drive type: Treibgas, construction width: 2,440 mm, Four-way side loader Load center: 600 mm Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 200/50x10 Rear tires type: Superelastic Rear tires size: 27x10-12 Description: In addition to this Combilift model, we have around 200 heavy duty forklifts, compact forklifts, forklift trucks, and side loaders available at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing on attractive terms are always possible for us. We also gladly purchase your used machines directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this C4000. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons. We are also happy to offer your vehicle on consignment sale in our facility. Fork positioner, Fork positioner opening range: 660 / 3001 mm; Full free lift, Platform height: 540 mm Ndsdpfx Absz Ewams Uob

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 3,000 mm, turning diameter: 700 mm, SMTCL CAK80285D CNC horizontal lathe, year of construction 2011, with original FANUC control. Offered for sale by the first owner. All maintenance has been carried out without exception; the machine is still in active, trouble-free production use. It has not been heavily used - a machine with plenty of life left. Bed ways and slide surfaces are clean and in very good condition. Technical data: - Turning diameter over bed: 700 mm - Turning diameter over cross slide: 500 mm - Turning length / machining capacity: 3,000 mm (3 m) - Control: FANUC (original) Ndodpsz An Ryofx Ab Ujb Can be inspected under power in our workshop and is ready for immediate delivery.

Condition: used, Year of construction: 2008, operating hours: 46,815 h, functionality: fully functional, Disassembly, loading, and transport are the responsibility of the buyer. Njdpfx Ajzzvw Sjb Uodb Maintenance kit for NE-type lathes, consisting of rubber-metal scrapers, plastic scrapers, filter mats, and belts. Not included in the price. Sale only within the EU.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 13,979 h, machine/vehicle number: A3231E0532, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 4,541 h, laser power: 24,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 60 mm, sheet thickness stainless steel (max.): 60 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 24 kW (2023) High-spec 2D fiber laser cutting machine, one owner from new. 3000 x 1500 mm working area. Siemens Sinumerik 840D SL control with 21.5" multi-touch display. In daily production and under TRUMPF maintenance contract from new. Key data Machine No.: A3231E0532 Year of manufacture: 09/2023 Laser source: TruDisk 24001 (external, separate energy supply) Laser power: 24,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 60 mm / stainless 60 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight: 7,650 kg Supply: 400 V 3~ / 50 Hz, 22.0 kVA, 3 x 63 A Hours: 13,979 h operating / 4,541 h laser-on Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (right). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle cleaning. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Mild steel slats, 67 mm spacing. Slag cart under pallet changer. Cleaning brush. Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Automatic nozzle centring. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK 840D SL. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Nanojoints. Oseon Go. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package, gas mix cutting package (N2/O2). Gas Witt gas mixer unit with hardware gas mixer for two gases, plus additional cutting gas connection. Pallet changer / automation Automatic heavy-duty pallet changer in longitudinal direction. LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Data transfer USB interface. RJ45 network interface. Central Link. Remote support. Installation Ndodpfxezz Sd Ue Ab Usb Currently installed on a mezzanine. Mezzanine steel structure not included in the sale. Condition and availability One owner from new, used in daily sheet metal subcontract production in Braintree, Essex. Under TRUMPF maintenance contract from new (two services per year) and still covered - full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available on request. Enquiries Full TRUMPF order confirmation, service history, hours report, cut samples and video of the machine running available on request.

Condition: new, pressure: 65bending length: 2550column width: 2550daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3680x1960x2500weight approx.: 5500motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Nsdjd Etfxopfx Ab Ujdb

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 14,178 h, load capacity: 5,000 kg, lifting height: 4,260 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 2,880 mm, fork carriage width: 1,260 mm, fork length: 1,350 mm, empty load weight: 7,390 kg, total length: 4,200 mm, drive type: Diesel, construction width: 2,150 mm, Sideload forklift Load center: 650 Fork width: 180 mm Fork thickness: 50 mm Mast type: Duplex Njdez Ev A Tepfx Ab Ujdb Condition: Ready for operation and fully functional Technical condition: normal Front tire type: Superelastic Front tire size: 27x10-12 Rear tire type: Superelastic Rear tire size: 27x10-12 Description: In addition to this Jumbo model, we have around 200 heavy-duty forklifts, compact forklifts, lift trucks, and sideloaders available in our Hamburg and Gdansk warehouses. Visit our homepage – sago-online. Leasing and financing on favorable terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this J/SNHP 50/13/42V. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom construction of forklifts from 8 tonnes and up. We can also display your vehicle for consignment sale at our facility. Fork positioner, Fork positioner opening range: 380 / 1245 mm Heater, full cab, full free lift, Platform height: 880 mm

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Nsdpsz Ai Tpofx Ab Ujdb Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Traub CNC turning machine TNA480, TX8D, year of manufacture 1990, serial number 607. Servo C-axis, reinforced rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, 3-jaw chuck KNCS315, ID090090. Main drive with 2 gear stages. A8 spindle with hollow clamping cylinder Röhm SZS 86/169, ID 416530. Additional accessories, tool holders, chucks available upon request. Includes ATC optics, spare parts catalog, wiring diagram, tool holder catalog. Very good condition, operational, can be inspected while running. Nodpfx Ajz Eqh Dob Ujdb Machine geometry has been checked and corrected/adjusted, and a test run has been performed. Scraper + belt + drive sprocket, belt checked and replaced, maintenance performed at 4000 hours. Technically very good condition, guideways, spindle bearings in very good condition. Videos available upon request.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 09075101981004, input voltage: 380 V, type of input current: three-phase, total length: 28,000 mm, year of last overhaul: 2024, control voltage: 380 V, workpiece height (max.): 160 mm, Equipment: double-sided, A woodworking company in Latvia is offering a complete Weinig GreCon Combipact finger jointing line for sale. The machine has had only two owners, both well-known companies in Latvia. We have operated the machine ourselves for the past 8 years. The reason for the sale is the recent purchase of new Weinig equipment. The machine is in full working order and is currently stored in a heated facility, ready for its next owner. The machine has only been operated in a single shift. The machine also has the option to produce finger joint connections for furniture. Nodpez Armljfx Ab Uodb The machine can be inspected and demonstrated in operation at our facility. Regular maintenance and repairs have been carried out throughout its service life to ensure maximum productivity and profitability. Spare parts have been regularly sourced from the official Weinig dealer in Latvia. The machine is available for inspection and testing in Kuldīga, Latvia. All original Weinig manufacturer documentation is available. Some spare parts are also available for this machine. We are also selling a Weinig Dimter Opticut optimization line that was purchased together with this machine. Please see our separate advertisement for details. For further information, please contact us by phone or email, and I will provide all technical information. Additional images and videos can also be provided.

Condition: excellent (used), Year of construction: 2011, operating hours: 6,500 h, functionality: fully functional, machine/vehicle number: 52180, grinding length: 1,000 mm, grinding width: 750 mm, total height: 2,755 mm, total length: 3,840 mm, total width: 2,940 mm, workpiece weight (max.): 690 kg, grinding height: 410 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 1,600 m/min, feed rate Z-axis: 2,000 m/min, table length: 1,000 mm, table load: 690 kg, type of input current: three-phase, table width: 750 mm, grinding wheel width: 100 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 1,000 rpm, overall weight: 8,500 kg, grinding spindle motor power: 10 W, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, rotational speed (max.): 1,500 rpm, grinding spindle speed: 1,430 rpm, warranty duration: 12 months, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, Used Surface Grinding Machine ELB-Schliff Smart BL10 HYD Comfort For sale is a used Smart BL10 HYD Comfort surface grinding machine from the manufacturer ELB-Schliff. Equipment: - Water tank with automatic paper band filter - Hydraulic unit with a hydraulic cooler - Mounted table dresser - MPM balancing device including integrated speed sensor, vibration sensor and power supply - Rail guidance in the Y and Z axes - X-axis is hydraulically controlled with V/flat guide Nedpfoz Au I Sox Ab Uedb Renewed and overhauled components: - Z-axis guides professionally re-scraped - Guide rails and guide carriages of the Z-axis renewed - The operating software (B&R) has been updated to the latest version The machine is in operating condition at our facility and can be inspected by appointment. A test run is also possible, so you can see the condition and working quality of the machine on site. We offer a 12-month warranty on the machine. Upon request, we also offer installation and commissioning of the machine, as well as training directly at your facility. Even after the purchase, we are happy to be your reliable contact for service, maintenance, and technical support regarding the machine.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, measuring range X-axis: 440 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 410 mm, workpiece weight (max.): 227 kg, total height: 2,320 mm, type of input current: AC, total width: 1,160 mm, total length: 1,030 mm, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, overall weight: 293 kg, input voltage: 220 V, table height: 930 mm, travel speed (max.): 21,000 mm/min, repeat accuracy: 0.003 mm, table load: 227 kg, compressed air connection: 4 bar, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, TESA MH3D DCC coordinate measuring machine (CMM) for sale in very good, well-maintained condition and ready for immediate use. Features: PC-DEMIS Pro for Windows Version 4.2 MR4 Release software (legally transferable) Current calibration and maintenance performed on 09/09/2025 Renishaw MH20i / TP-ES probing system Includes several probe extensions and accessories Including EM1 extension exchange module, L=70 mm (new price 07/2025: €1,255 net) 1x TP20 SF probe module (standard probing force) 1x TP20 EF probe module (high probing force for long probe combinations) Functional HP computer included Calibration and measurement records available Operating manual on CD Additional, functional Renishaw Brown & Sharpe TP-ES probe head Original TESA Star-i probe head (defective) Additional Renishaw MIP probe head (probably defective) Various styli included (see pictures) Condition: Granite table in very good condition Axes run smoothly and precisely Ndedpey Taixsfx Ab Ujb No problems with the air bearings Machine has been regularly serviced Used only in a metrology laboratory Immediately ready for production and measurement Typical wear marks present on one side of the guide rail; purely cosmetic and without any technical restrictions Air bearings run smoothly, without jolts, and precisely Calibration is current and within specification Inspection and functional demonstration possible by arrangement. Suitable for quality assurance, incoming goods inspection, manufacturing metrology, toolmaking, CNC machining, or metrology service providers.

Condition: new, Portal machine - the space miracle! Ndjdpfxshqhlvs Ab Ueb CNC portal milling machine for large traverse paths with small space requirements! ADVANTAGES: -optimized space utilization, completely free table clamping area -best possible chip protection due to overhead axes -particularly suitable for high and bulky components -PILZ safety technology -Windows 10 APPLICATIONS: -chipping -measuring and testing -dosing applications FOR MACHINING: -Aluminum / light metals -Milled plastics -Ceramics -Non-ferrous metals (brass, bronze, etc...) -Plastics -Wood Maximum functionality with minimum space requirements is the motto of the OverHead Gantry M. The basic machine can be optimally configured for many sectors and work areas using a variety of variable equipment features and additional options. The possible applications of the OverHead Gantry M include measuring, testing and metering applications in addition to machining. The power of the milling motor of up to 2.2 kW and 20,000 rpm and a traverse speed up to 250 mm/sec make it suitable for processing wood and plastic as well as light and non-ferrous metals. The free processing area and its excellent price/performance ratio off er decisive benefits compared to similar products. The OverHead® Gantry M is available in five different sizes for different process areas from M20 to M50. Do you require the control cabinet on the right-hand side or would you prefer the control panel to be on the left? No problem – we will be happy to accommodate your requirements. And of course we will take care of maintenance and support for your OverHead® Gantry M. Our service technicians can be reached by telephone and can attend to you quickly on-site as needed. In addition, we also off er our in-house isy-CAM 2.8 software and can advise you on your specific application. BENEFITS: -Optimal use of space -Free machining area -Fixed table, mobil portal -Variable clearance of 340- 590 mm -Also suitable for a large chip volumes SET UP: Portal: mobil, Table: Fixed

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2000, total length: 12,310 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22.5, tire condition: 50 %, wheelbase: 8,600 mm, color: other, Year of construction: 2000, Equipment: ABS, = Additional options and accessories = - ADR - Air Suspension - BPW Axles - Drum brakes = Remarks = Superstructure Volume: 37.5 m3 Tank capacity: 37500 liters = More information = Axle configuration Tyre size: 385/65 R22.5 Make axles: BPW Tyre profile: 50% Brakes: disc brakes Njdpfx Aboz Er R Hs Usdb Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 7.600 kg Carrying capacity: 31.900 kg GVW: 39.500 kg Maintenance APK (MOT): tested until 02/2027 Identification Registration number: OG-02-GF

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest for motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is constructed, except for the computer, which is a newer, more modern HP model with a small form factor. Ndodszcqy Eopfx Ab Usb Max. diameter 350 mm Max. test piece height 500 mm (higher values are possible by measuring in two parts, up to a maximum of 1000 mm...) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg; it was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password...). It is also on the USB stick, perhaps for installation on another machine at your location. Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) is included for calibration! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight carrier. It is already well secured on them. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Shipping is at the buyer's expense and will be on two Euro pallets. The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Errors can be made during assembly and commissioning. For example, some locking screws are installed for transport, and if you forget them, the system could be damaged when starting up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00701, load capacity: 70 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-710iC/70 manufactured in 2013.05. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/70 Nsdpjz Etumsfx Ab Ujdb Model Number: A05B-1125-B202 Year of Manufacture Robot: 2013.05 Warranty term (months): 12   Payload (kg): 70 Reach (mm): 2050 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2013.05 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: used, mileage: 38,538 km, power: 120 kW (163.15 HP), first registration: 01/2013, overall weight: 12,100 kg, fuel type: diesel, color: white, axle configuration: 4x2, empty load weight: 6,500 kg, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, loading space volume: 5 m³, Year of construction: 2013, operating hours: 8,260 h, Equipment: additional headlights, air conditioning, hydraulics, Street sweeper: - Schmidt - Cleango 500 - Year of construction 2013 - 4 cylinder VM diesel engine (R56), 120kw, Euro 5 - 38,538 total kilometers; 15,806 sweeping kilometers - 8,263 engine hours; 6,175 driving hours; 5,418 sweeping hours; 5,754 blower hours - 3. brush can be moved sideways at the front + swivels Fresh water tank with dust binding nozzles - 5m³ stainless steel hopper - Hydrostat Ndsdpfsqxt N Rjx Ab Uob - 2-seater - Yellow lights - Climate control - Unladen weight: 6,500kg; permissible GG: 12,100kg - 5485mm x 1810mm x 2870mm (lxwxh) - Municipal vehicle from 1st hand You can find a video of this offer on You can find our entire vehicle stock at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 2202 - 11141, Deckel FP 2 M with 3-axis digital Heidenhain ND 780 control Original condition, not repainted Stepless feed rate + rapid traverse Spindle speeds: 25 - 2500 Travel distances: X 400 Y 220 Z Drilling spindle, horizontal + vertical, SK 40 Central lubrication, manual Weight: approx. 1400 kg Electrically monitored chip guard, 2 x emergency stop for compliance with CE standards Nsdpfxez Ayzks Ab Uedb Machine vice, collet set, 6 tool holders SK 40, machine feet, lighting. Condition very good, smooth operation at all spindle speeds and flawless guides. Can of course be inspected while powered on. Free loading at D - 88433 Schemmerhofen.

Condition: used, Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, machine/vehicle number: HS6434, path measurement accuracy: 620 mm, type of input current: AC, total width: 620 mm, total length: 3,820 mm, total height: 700 mm, overall weight: 300 kg, input voltage: 230 V, The Cox & Plant HS6434 is a high-performance, industrial-grade electromagnetic vibratory conveyor designed specifically for the hygienic handling of bulk solids, particulates, and fragile products. Manufactured in 2015, this unit represents the pinnacle of Cox & Plant’s specialist engineering in efficient, low-maintenance food and chemical processing technology. Utilizing a precise 6mm stroke amplitude driven by heavy-duty electromagnetic coils, the system offers instantaneous start/stop control and eliminates the mechanical wear components (like belts, bearings, and eccentric drives) common in traditional conveyors. Ndsdpszz Ax Aofx Ab Uob