Used Golf Course for sale (1,004)

Year of construction: 2017, condition: good (used), Golfcar CLUBCAR PRESEDENT 2-seater Golf Cart Golfkar Golfcart 2017 with Charger Video can be sent via Whatsapp. Ongoing stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. maintains a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties (see our general terms and conditions). For a viewing and/or test drive, you can make an appointment without obligation. Please call in advance as we are not always present. Ffedpfsyf Ic Aox Afpeu Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2017, condition: good (used), Golfcar CLUBCAR PRESIDENT 2-seater golf car Golfcart 2017 with charger. Video can be sent via WhatsApp. Ongoing stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. holds a changing stock of machines, trucks, trailers, and attachments. Ffedpjyf Icvofx Afpeu All our deliveries are at trade prices, under AS-IS conditions without warranties (see our general terms and conditions). For a viewing and/or test drive, you can make an appointment without obligation. Please call in advance, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2017, condition: good (used), Golf Cart CLUBCAR PRESEDENT 2-seater Golf Cart Golfcart 201 With Charger Video can be sent via Whatsapp. Ongoing stock, see website. Prices are ex Nuland. Ffjdpfeyf Icpsx Afpeu Van de Wert Trading B.V. maintains a dynamic inventory of machinery, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranty (see our general terms and conditions). To view and/or test drive, you are welcome to make a non-binding appointment. Please call ahead, as we are not always present on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2017, condition: good (used), Golf Car CLUBCAR PRESEDENT 2-seater Golf Cart 2018 with Charger Video can be sent via WhatsApp. Ffsdpfx Ajyf Icisfpsu Continuous stock, see our website. Prices are ex Nuland. Van de Wert Trading B.V. maintains a varying inventory of machines, trucks, trailers, and attachments. All our deliveries are at trade prices and on an AS-IS basis without warranties (see our general terms and conditions). For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2018, condition: good (used), fuel type: electric, Golf Car CLUBCAR PRESEDENT 2-seater Golf Cart 2018 with Charger Ffjdpfx Aeyfn Rgefpou Video can be sent via WhatsApp. Continuous stock, see our website. Prices are ex Nuland. Van de Wert Trading B.V. maintains a varying inventory of machines, trucks, trailers, and attachments. All our deliveries are at trade prices and on an AS-IS basis without warranties (see our general terms and conditions). For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 1991, Binder with 15 Clamps ZTM 370 Gathering Station: 8 Stations Fodpfswzkfmsx Afpsfu Cold-Gluing-Unit

Condition: used, mileage: 4,25,711 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, first registration: 09/2008, emission class: euro4, color: white, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, soot filter, +++New clutch+++ Ffedpfxsxfdzms Afpou General Engine: Volkswagen Emission standard: EURO 4 Total number of seats: 5 Seating: 4+1 high/fixed with 3-point seat belts Transmission: Manual gearbox Safety * Cruise control * ABS, ESP, EBS * Fog lights * Immobiliser Passenger compartment * Air conditioning * Jet ventilation * Reading lights Audio, Communication, Electronics * Navigation system * Radio / CD Exterior * Power steering * Sun visor * Electrically adjustable exterior mirrors * Driver's door * Central locking Other * German registration documents * Vehicle length: 4.20 m * Vehicle width: 1.75 m * Vehicle height: 1.56 m * Hubcaps * Front tyres approx. 60% remaining * Rear tyres approx. 70% remaining our internal vehicle number: 11665 Errors and omissions excepted. Images and text may differ from the actual vehicle. Always over 300 vehicles in stock.

Condition: used, Dear Sirs, We offer you modular systems of small crane systems of the companies "DEMAG" and "ABUS" used, partly as good as new, at favourable conditions. The systems are tailored to your needs. In case of inquiries, please tell us whether you want to carry out a linear or area-wide transport. Furthermore, we need your information on the load capacity, crane girder and track lengths, suspension distances, roof pitches and type of ceiling construction. Please tell us your lifting problems. Ffjdsp Dhbjpfx Afpeu Furthermore, we can offer you the electric chain hoists at favorable conditions.

Condition: good (used), Equipment: Fodpfsd R Tgyex Afpofu gathering machine: • chain tensioner with hand fed • 15 stations • criss-cross delivery perfect binder • 18 clamps • milling and roughening unit • hotmelt spine gluing unit • hotmelt side gluing unit • premelter • pile cover feeder • cover pressing station • gauzing station • 2. cover pressing station • stack delivery

Condition: good (used), Size: max 320 x 260 x 40 mm min 150 x 100 x 2 mm Book block thickness: max 40 mm min 2 mm Fsdpfjgbxl Ujx Afpjfu Cover size: max 560 x 325 mm min 202 x 150 mm Speed: max 5.000 c/h Power requirements 24 kW (220/380V, 50Hz) Length 7.543 mm Width 2.400 mm Equipment gathering machine: chain tensioner with hand fed 20 stations missing sheet and double sheet control perfect binder 18 clamps milling and roughening unit hotmelt spine and side gluing unit pile cover feeder cover pressing station lay down device standards 1 set of operator manuals standard equipment information: condition: very nice machine in good working condition

Condition: good (used), Screws, eye bolts -Manufacturer: Golfaro, M30 C15 eyebolts -Grade: Steel, galvanized -Quantity: 109 eyebolts available -Price: per piece -Dimensions: 150/110/65 mm Fjdpfjyhmcaox Afpefu -Weight 1.7 kg/pc.

Condition: new, empty load weight: 860 kg, maximum load weight: 2,640 kg, overall weight: 3,500 kg, loading space length: 3,550 mm, loading space width: 200 mm, loading space height: 1,690 mm, tire size: 195/50r13c, *Low loader *construction machinery transporter tandem *for construction machinery, excavators, platforms, scissor lifts and many other vehicles. Hapert builds extremely stable *car trailers* such as this INDIGO LF-2 355x169cm. Fjdpfx Aen E Rm Eefpjfu The *construction machinery trailer* is easy to load via a very stable lattice access flap. An absolute *universal trailer* not only for construction equipment but also for transporting lawn mowers, tractors, bulk goods and small vehicles. Full-length and accessible wheel arches make it easier to get out of a wheel loader. Here, the driver no longer damages the mudguard of the *car trailer*. The *machine transporter* is equipped with a stable lattice flap, parabolic suspension, automatic support wheel, accessible wheel arches, extremely stable welded and hot-dip galvanized frame and V-drawbar. We also offer accessories for machine transport trailers such as bucket storage, aluminum floor, tarpaulin with frame, lashing straps and anti-theft devices at a reasonable price.

Condition: excellent (used), Year of construction: 2007, operating hours: 3,482 h, power: 7 kW (9.52 HP), fuel type: gasoline, color: other, Year of manufacture: 2007 Empty weight: 303 kg Carrying capacity: 363 kg GVW: 666 kg Technical condition: very good Visual appearance: very good Please contact Ton for more information Manufacturer: John Deere Type: Gator CX Year of manufacturing: 2007 Weight: 303 KG Hourmeter: 3482 Drive: Petrol, 4x2 Product number: 22111 Machine is technically in perfect condition. Price: € 4.950,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Fedpfx Afex Uxk Dopsfu Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Year of construction: 2015, condition: used, 3x Yamaha g29 Bj 2015/ 2016 Fodpfx Aexz S S Sjfpsfu With a loading bed and built-in charger Electric

Condition: used, Year of construction: 2000, gearing type: other, first registration: 01/2000, color: blue, mileage: 1,001 km, number of seats: 2, driver cabin: sleeper cab, Equipment: cabin, central locking, cruise control, fog lights, spoiler, Vehicle location: Bovenden, sun visor, roof spoiler, roof hatch Dismantling of Daimler-Benz Atego 823 L 4X2! Fahrgestellnummer: WDB9702271K555710! WITHOUT DOORS! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Fodpfx Aoi Rrc Ssfpjfu - .

Condition: new, empty load weight: 1,101 kg, maximum load weight: 2,399 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,050 mm, loading space width: 1,790 mm, loading space height: 190 mm, loading space volume: 1.5 m³, color: silver, construction height: 1,450 mm, working width: 2,380 mm, Hydraulics, automatic reverse drive, NEW MODEL incl. 150cm long drive-on ramp, hot-dip galvanizing, parabolic suspension, aluminium floor, *immediately available * NEW MODEL incl. 150cm long drive-on ramp, parabolic suspension, aluminium floor 150cm long drive-on ramp, parabolic suspension, aluminum floor TECHNICAL DATA - Make: Hapert Trailers - Model: Indigo LF-3 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 405 x 179 x 19 cm - External dimensions (LxWxH): 589 x 238 x 145 cm - Loading height of floor: 42 cm - Perm. Total weight: 3,500 kg - Unladen weight: 1,101 kg - Payload: 2,399 kg - Chassis: Low loader (wheels next to the body) - Tires: 195/50R13C - Chassis: KNOTT parabolic suspension + 100 km/h - Support wheel: Yes, automatic - 100 km/h approval: YES EQUIPMENT: - Brake: Yes - Number of axles: 3 - Floor: Aluminum floor - Drop sides: Steel drop sides - Drop side height: 19 cm - Locks: Eccentric locks - Number of pallet spaces: 5 - Multifunctional vehicle: No - Tipping / lowering function: Without - Hydraulic pump: - - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, square tube - Mudguards: Steel mudguards - Spare wheel: Optional, can be retrofitted - Bucket storage: Optional, can be retrofitted - Superstructures / attachments: Optional, attachable - Ramp chute: No - Ramps/ramp flap: Yes - Type of ramp: Continuous tailgate - Load ramps: - - Drive-on angle: approx. 20 - Supports: Integrated in tailgate - Lashing eyes: 10 - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC documents DESCRIPTION - 3x parabolic spring axle each 1. hot-dip galvanized - steel drive-on flap standing on shaft 150cm - sturdy eccentric locks - corner stanchions with locks for tailgate can be removed without tools - insertion option at all 4 corners for tarpaulin frames, grid attachment, robust support feet on the drive-on flap - lifting aid for drive-on flap - very low chassis for low drive-on angle - optionally with bucket tray - 10x lashing eyelets recessed into the side of the frame profile (1000dAN/kg) TÜV certified - perforated rail on three sides 6cm (Combi Protect Rail) can also be used with locking bars and lashing straps - round holes 25mm, Slotted holes 54x25mm - Parabolic spring axle from KNOTT - Automatic reverse drive - KNOTT overrun device and parking brake - Very sturdy bolted V-drawbar REINFORCED - 13-pin plug - Return travel license plug - reversing lights - large safety lights - rear lane departure lights - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved. Fodpfx Aju Hrl Rofpofu

Condition: new, Year of construction: 2025, A stone production plant for sand and aggregate is designed to produce different types of materials used in construction, such as sand, gravel, and crushed stone. Here’s a detailed layout of a typical stone production plant: Process Overview Feeding: Raw materials (large stones) are fed into the plant. Primary Crushing: Large stones are reduced in size by a primary crusher. Secondary Crushing: Further reduction of stone size by secondary crushers. Screening: Separation of crushed materials into different sizes. Sand Making: Processing certain fractions to create sand. Washing: Cleaning of aggregates and sand to remove impurities. Stockpiling: Storing the final product for shipping. Main Components Raw Material Storage: Storage area for raw stones. Vibrating Feeder: Feeds stones into crushers consistently and evenly. Primary Crusher (Jaw Crusher): Breaks down large stones into smaller pieces. Secondary Crusher (Cone Crusher/Impact Crusher): Further reduces stone size. Vibrating Screen: Classifies materials into different size fractions. Sand Making Machine (Vertical Shaft Impact Crusher): Converts some fractions into sand. Sand Washer: Cleans sand to remove unwanted particles. Belt Conveyors: Transports materials between different processing stages. Control System: Monitors and controls the entire production process. Dust Collection System: Reduces dust emissions for environmental compliance. Applications of Stone Production Plant Construction Industry: Essential for concrete, road construction, and building foundations. Landscaping: Used for decorative aggregates, pathways, and erosion control. Infrastructure Development: Supports drainage systems and flood control structures. Manufacturing: Provides materials for glass, cement, and steel production. Agriculture: Neutralizes acidic soils and serves as livestock feed. Ffodpfx Afeq Ny Saspsu Environmental: Used in water treatment and land reclamation projects. Residential Applications: Ideal for driveways, walkways, and patios. Recreational Facilities: Supplies sand for golf courses and playgrounds. Energy Sector: Supports oil and gas drilling and renewable energy projects. Art and Design: Utilized in sculptures and architectural features.

Condition: excellent (used), functionality: fully functional, axle configuration: 4x4, Year of construction: 2010, operating hours: 4,212 h, For sale freshly imported from Denmark Spindle mower for leveling football pitches or golf courses, The mower is characterized by the fact that it has a cabin and is a JOHN DEER with a YANMAR engine manufactured in Japan, it has 5 mechanisms for leveling grass 5x75cm in total 3.45m cutting width. Fully functional, regularly serviced Fjdpfx Afewc Rcbopofu comes from the first owner who worked with it on the golf course. Mileage approx.: 4200 mth Year of production: 2010 Everything is functional. Technical data: Yanmar engine Capacity 2.1cm3 Power: 31kW 4 cylinders diesel Cutting width: 3.45m Maximum speed: 15kmh Hydrostatic drive 4X4 - with the possibility of adjustment Has a cabin Equipment: Radio Heating Lights Turn signals Wipers Adjustable seat Traction control Control everything in the cabin == The John Deere 1905 series, five-unit reel mowers, have a total cutting width of 345 cm (136 in) with a working speed of up to 15 km (8 miles) per hour. Designed primarily for use on golf courses and football pitches, this four-cylinder mower is equipped with a 51 HP (max) Yanmar diesel engine, hydrostatic transmission, Command Arm control and four-wheel drive. From the outset, the models have been equipped with 76 cm (30 in) wide ESP reels, which is particularly important for golf course managers, for whom top performance is of the utmost importance.

Condition: excellent (used), functionality: fully functional, power: 17.65 kW (24.00 HP), fuel type: gasoline, operation weight: 350 kg, Year of construction: 2015, operating hours: 427 h, Equipment: all wheel drive, cable winch, Dvorak SPIDER ILD-02 Radio remote controlled Large area mower / embankment mower Technical information according to manufacturer: Spider large area and embankment mower Areas of application The remote-controlled SPIDER ILD was designed for the maintenance of uneven and rough terrain, with inclines of up to 40° degrees (up to 55° degrees with the optional cable winch). The mower not only copes well with rough ground, wild growth and unkempt lawns, but also with well-kept parks. It is invaluable, especially when maintaining ditches around roads, for cutting grass in orchards and forest nurseries, landfills, areas around power stations, airports or mountain hotels, ski slopes and parks and military areas. It can also be used in agriculture and is often used for mowing golf courses and other sports facilities. The unique drive system makes it very suitable for maintaining the surrounding terrain of reservoirs, rivers and dams. The machine's exceptional environmental friendliness is due to its low weight and soil-friendly drive system. The 4-wheel drive allows the mower to be used in wetlands and protected nature reserves. Mowing system Mulching system Control system Radio remote control Cutting width 123 cm Cutting height adjustable from 90 - 140 mm Cutting system 4 cutter bars with 8 blades Area output Ø 3,500 m²/h | max. 7,000 m²/h Engine Kawasaki FS 691V | 2 cylinders Engine output 17.6 kW | 24 hp | 726 cc Fjdpjtzczdofx Afpofu Transmission Hydrostatic transmission 0 - 8 km/h Hour meter Yes Electromagnetic mower clutch with brake Drive 4-wheel drive Steering 4-wheel steering Wheels endlessly rotatable through 360 Tires 16 x 6.50 | V-profile Tank capacity / consumption 16 liters / 3 - 3.8 l/h Weight 335 kg Dimensions 1640 x 1430 x 920 mm This SPIDER ILD02 with cable winch was first commissioned in 2015, has 427 operating hours according to the meter and is in a well-kept overall condition with the usual signs of use and wear and tear of this equipment class, customer service freshly carried out, ready for immediate use! - Net price 16.722,-€ / Gross price 19.900,-€ - Viewing / test drive possible - Shipping costs nationwide (except islands) 400,-€ - Our leasing partner will be happy to provide you with an attractive leasing / financing offer!

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller model: HypCut, laser type: fiber laser, laser source manufacturer: MaxPhotonic, laser power: 20,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 80 mm, sheet thickness stainless steel (max.): 100 mm, sheet thickness aluminum (max.): 60 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 12 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, input current: 110 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 20 bar, overall weight: 9,500 kg, warranty duration: 12 months, door opening width: 1,000 mm, door opening height: 2,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, New Laser Cutting Machine with 20 kW Fiber Laser Our goal is to offer highly precise, long-term stable, and yet cost-effective laser machines. Our machines are ideal for workshops and repair businesses. The delivery includes a perfectly developed cutting parameter library as well as first-class service. Please also check out our attractive leasing/leasing-purchase offers. - Machine with automatic nozzle changer (optional) and automatic nozzle centering (optional) - Machine with automatic shuttle table - Machine bed lined with graphite plates - Machine measured and calibrated with Renishaw system (including measurement protocol) - Space-saving design - Extremely energy-efficient cutting system - Requires only approx. 9.5 x 3.5 meters of installation space Ffsdpfjyhhnkex Afpou - 20 kW MaxPhotonics laser source (G5 / German specification) The following options are also available: - Automatic nozzle changer (optional) - Automatic nozzle centering (optional) - Vision control (placement and nesting via camera system) - Top quality – schedule a viewing today! Cutting capacities: - Steel sheet up to 80 mm - Stainless steel sheet up to 100 mm - Aluminum sheet up to 60 mm - Travel: 1500 x 3000 mm - Machine control in German language - Safety light curtains for maximum operator protection - Extensive collision protection measures for the cutting head - Large laser safety windows on three sides for optimal monitoring of the cutting process - Automatic, programmable 3-gas switching (compressed air, nitrogen, oxygen) - Comprehensive cutting parameter database - Incl. nesting module - Very user-friendly operation - High-performance laser chiller - Machine control in German - Comprehensive service and warranty package - High-performance laser chiller - Optional filter extraction system Sale exclusively to commercial customers. Delivery / consultation / sales only within Germany / Austria / Switzerland Machine dimensions approx.: Length: 8.5 m Height: 2.3 m Width: 3.5 m Total weight: approx. 9500 kg Need a different laser power, table shape, or table size? No problem. I am happy to prepare a suitable offer. E.g. 2 kW machine from €29,990 or 6 kW machine from €79,900 Not sure which laser power is right for your application? Just give us a call! Of course, I can perform cutting trials according to your requirements – many solutions are possible.

Condition: excellent (used), Year of construction: 2012, operating hours: 40,226 h, functionality: fully functional, machine/vehicle number: 221240, screw diameter: 40 mm, injection weight: 172 g, As an injection molding machine dealer, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines, models from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 370S 700-290 with vertical injection equipment Serial number: 221240 Year of manufacture: 2012 Ffodjwg Tt Rjpfx Afpou Operating hours: 40,226 h Control system: Selogica Dimensions (L/W/H): 3.92 x 1.45 x 2.02 m Weight: 3,300 kg Fully functional Condition very well maintained Extras Device for vertical injection 1 core pull circuit Additional heating band connection 5 free, manually controlled cooling circuits Air valve connection controlled via Selogica Equipment packages: Quality assurance, documentation, advanced monitoring, production control, etc. Flexible part chute. - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) German language - From first owner - Made in Germany Constant maintenance by the manufacturer and previous owner Injection unit Screw diameter 40 mm Injection weight 172 g/hp Injection pressure 1530 bar Injection volume 188 cc Clamping unit Clamping force 70 t/700 kN Tiebar spacing 370 x 370 mm Clamping platens 510 x 510 mm Mold height 200 mm Maximum spacing between platens 600 mm Ejector stroke/force 125 mm/30 kN Hydraulic clamping unit Motor power 15 KW Heating power 7.7 KW - 5 zones Total power 23 KW Warranty Warranty until the first Commissioning Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our Hanover/Germany warehouse More pictures to follow Information about the machines we offer and our company - We only sell our own machines purchased from ongoing production from our Hanover warehouse - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - We are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course - All machines offered can be viewed in our warehouse

Condition: new, Year of construction: 2005, functionality: not functional, turning diameter over cross slide: 1,100 mm, turning length: 900 mm, turning diameter: 1,100 mm, spindle motor power: 55 W, rotational speed (min.): 7 rpm, rotational speed (max.): 350 rpm, total height: 3,700 mm, total length: 2,400 mm, total width: 3,300 mm, turning diameter over bed slide: 1,100 mm, workpiece weight (max.): 5,000 kg, overall weight: 13,550 kg, Vertical Turning Lathe 1100 CNC Fanuc Technical Specifications Model: SC1100 - Vertical Turning Lathe 1100 mm Work heads: 1 Control: CNC Fanuc 0i TF(2025 edition) Retrofit status: in course Electric: new panel, new cabinet, new portacable chains, new cables, new covers. Main motor: original 35 kW Fanuc Condition: mechanically new, never worked. Inspection: available any time. The machine is undergoing work of receiving CNC. Price, install and transport on request. Ffsdpfx Afeygvwkspsu More technical specifications on request.

Condition: new, functionality: fully functional, Year of construction: 2022, operating hours: 1 h, load capacity: 240 kg, empty load weight: 920 kg, construction height: 1,990 mm, fuel type: electric, total length: 1,440 mm, drive type: Elektro, construction width: 760 mm, working height: 5,900 mm, Scissor lift Condition: New machine Technical condition: New Front tires type: Non Marking Rear tires type: Non Marking Battery Volt: 24V Fjdpeu D Tfysfx Afpofu Battery Ah: 85Ah Battery Manufacturer: Magni Battery Type: Waterless Battery year of manufacture: 2022 Description: In addition to this device, we offer other forklifts and warehouse equipment. Our devices are workshop and FEM4.004 tested. Please contact us by e-mail or by phone. You can also find us at hsr-gabelstapler Of course, we also buy your used truck, even without you purchasing a vehicle from us. Installment plan & financing on favorable terms are available on request. We will be happy to advise you competently and in detail about our vehicles.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 3,500 kg, door opening width: 3,000 mm, door opening height: 600 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 6kW fiber laser Delivery time: approx. 6-8 weeks Our commitment is to provide highly precise, long-term stable, yet cost-effective laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameters library is included in the delivery, as well as first-class service. Please also consider our attractive leasing/loan purchase offers. - Machine without automatic shuttle table! Loading takes place on the long side of the machine - Very space-saving - Extremely energy-efficient cutting system - Requires only approx. 4 x 4.5 meters of floor space Ffedpoxw T Nkjfx Afpsu - 6kW laser source from MaxPhotonics (G5/German configuration) - Laser generator with wall-plug efficiency exceeding 30% - Suitable for aluminum - Top quality – book your inspection now! Cutting capacity: - Steel sheet up to 30 mm (maximum) - Stainless steel sheet up to 15 mm (maximum) - Aluminum sheet up to 12 mm (maximum) - Brass sheet up to 8 mm (maximum) - Travel range: 1500 x 3000 mm (for large format) - Machine control system in German - Safety light curtain for maximum operator protection - Extensive collision protection measures for the cutting head - Large laser safety windows for process observation - Comprehensive cutting parameter library - Incl. nesting module - Very easy to operate - Powerful laser chiller - Machine control system in German - German service and spare parts supply - Powerful laser chiller - Exhaust filter system optionally available (5.5kW with frequency converter for pleasantly quiet operation) Leasing or hire purchase possible through our financing partner. Sale only to commercial customers. Delivery / consulting / sales only within Germany, Austria, and Switzerland. Machine dimensions approx.: Length: 4.0 m Height: 2.3 m Width: 4.5 m Total weight: approx. 4500 kg Need different laser power, table design, or table size? No problem. I would be happy to make you a suitable offer. For example, 2kW machine from 29,990 euro Not sure which laser power suits your application? Of course, I can perform cutting trials according to your requirements. Much is possible here.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, table width: 1,300 mm, travel distance X-axis: 2,550 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 3,500 kg, door opening width: 2,600 mm, door opening height: 1,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, new laser cutting machine with 3kW fiber laser Our goal is to offer high-precision, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included, as is first-class service. Please also take note of our attractive leasing and hire-purchase offers. - Machine without automatic shuttle table - Very space-saving design - Extremely energy-efficient cutting system - Only about 4 x 4 meters installation area required - 3kW laser source from MaxPhotonics (G5/German configuration) – suitable for aluminum - Top quality, schedule a viewing now! Cutting capacities: - Mild steel up to 22mm - Stainless steel up to 12mm - Aluminum up to 12mm - Brass up to 5mm Ffsdpfexa Ahnox Afpju - Travel range: 1260 x 2550mm (suitable for medium-size sheets) - Machine control interface in German - Safety light curtain for maximum operator protection - Extensive collision protection for the cutting head - Large laser protection window for process observation - 3-gas selection (compressed air, nitrogen, oxygen) - Extensive cutting parameters library - Including nesting module - Very easy to operate - Powerful laser chiller - German service and spare parts availability - Extraction/filter system optionally available (5.5kW with frequency converter for exceptionally quiet operation) Leasing and hire-purchase available via our financing partner Sale exclusively to commercial customers. Delivery / consulting / sales only in Germany / Austria / Switzerland. Machine dimensions approx.: Length: 4.0m Height: 2.3m Width: 4.0m Total weight: approx. 3500kg Need different laser power, table configuration, or table size? No problem. I am happy to prepare a tailored offer. Example: 2kW machine from €29,990 Not sure which laser power is right for your application? Of course, I can perform cutting trials according to your requirements. There is a wide range of possibilities.