Used Grid Frame for sale (9,715)

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Djdeyhduyepfx Afpecc Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 130598, Automatic frame press TYPE FS Press for gluing frames, windows, doors and similar parts. Year of manufacture 1996 Hydraulics 0-100 bar Pneumatics 0-10 bar Working voltage 380V/50Hz Power 7.5 kW Djdpfx Ast Du Saefpjcc

Condition: new, Year of construction: 2024, functionality: fully functional, Pneumatic horizontal and vertical bed frame presses Dcjdpfeutbavjx Afpec Standard solution suitable for frames 800-1000x1600-2000 mm.

Condition: excellent (used), Year of construction: 1998, Frame Dowel and Slot Mortising Machine by Hofmann HT 200 U with Angle Adjustment Specialized drilling machine for stair construction, window manufacturing, and universal use thanks to pneumatic height adjustment. Angled doweling and drilling for balusters are easily accomplished with the swiveling drilling unit. - Motor with pole switching, two speeds - Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm - Motor started via practical handle switch - Precision chuck with two inserts: 16mm and M10 thread - Table size approx. 1100 x 240 mm Dedpjyfta Tjfx Afpocc - Linear laser for precise workpiece positioning - Drilling unit swivels 65° to both left and right - Pneumatic adjustment of working height allows doweling on two levels without setup changes - Desired drilling heights for each level can be set using handwheel and digital counter; switching between levels is pneumatic from the front - Cross adjustment approx. 320 mm, stepless or in 12 mm increments - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, mountable at front and rear of the table - 2 swiveling workpiece supports - 2 side fences, also usable as front supports - Mobility kit - Extraction connector 80 mm - 4 used but good drill bits: 9, 12, 16, 19 mm Few touched-up paint spots, excellent condition—see original photos. A used swiveling slot mortising machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (LxWxH), weight 310 kg. The machine can be demonstrated at our premises by prior arrangement. We only offer machines that are ready for demonstration in our warehouse—see "more offers from this dealer."

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment Especially designed for stair construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drillings, such as for balusters, can be easily accomplished with the swiveling drilling unit. Motor with pole switching, two speeds Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start via convenient handle switch Equipped with Röhm two-jaw chuck, 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit can swivel 65 degrees left and right Pneumatic adjustment of working height allows dowelling on two levels without repositioning. Desired drilling heights can be set for each drilling level via digital counter, switching between levels is pneumatic and operated from the front Cross adjustment 340 mm, infinitely variable or in 12 mm increments via indexing rail Pneumatic clamping possible at any point, operated from the front Maximum height adjustment approx. 100 mm above table height Dcsdpfxexmatnj Afpjc Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front 2 swiveling workpiece supports Extraction funnel Central stop + 1 side stop Fixed mitre stop Length stop as round rod Assorted drill bits Operating manual CE mark Machine was partly repainted due to paint splashes. Pneumatic hoses replaced Dimensions: approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be viewed and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: new, Frame only: 5000*400 mm (about 14 pieces). Galvanized, new. If you need shelves or accessories in other compositions or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you in your planning. Dcodpfx Aek Tzzlofpoc Further accessories such as: Frame, corner and collision protection, push-through protection, chipboard, grids, rear wall grids, depth bars available. Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

Condition: new, Lattice rear walls -Anti-fall protection of stored goods at traffic and work areas If you need shelves or accessories in other combinations or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you with your planning. Further accessories like for example: Frame, corner and collision protection, push-through protection, chipboard, gratings, depth bars available. Shipping: Please enquire about freight costs, stating your postcode and location, as well as the desired item quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale! Dsdpjhciu Eofx Afpscc

Condition: excellent (used), You are buying mesh shelves for pallet racking with end station. Size: 1320*850 mm and 890*850 mm Height (L shape): 22 cm Material thickness: 4.24 mm Pitch: 92*48 mm Load capacity: approx. 600 kg/m2 If you require shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you with your planning. Further accessories such as Frame, corner and collision protection, push-through protection, chipboard, gratings, rear wall gratings, depth bars available. Shipping: Please enquire about freight costs, stating your zip code and location, as well as the required quantity of items. Further services: Planning, shelf assembly/disassembly, purchase/sale Dcsdpfx Aopu Ad Defpoc Subject to changes and errors in technical data, information and prices as well as prior sale!

Condition: good (used), It is ideal for 1100 mm frame depth. Other size is shown in the pictures. If you need shelves or accessories in other compositions or finishes, please contact us. We offer a comprehensive range of new and used shelves and accessories and will be happy to assist you in your planning. Further accessories such as: Frame, corner and collision protection, push-through protection, chipboard, grids, rear wall grids, depth bars available. Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale! Dedpfx Afehpxufopecc

Condition: used, Frame press ORMA EUROPA Line voltage 380 V - 50 Hz Djdpfewudzbjx Afpjcc Control voltage, magnetic components, lamp 110 V Main protection 3 x 25 A

Condition: excellent (used), Collapsible mesh box Colour: green Dedpfx Aeig Htrjfpscc Floor: flat steel plate External dimensions: 1200x1000x950 mm Weight: 113 kg

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Dodevvkmbepfx Afpocc Storage location: Nattheim

Condition: used, tank capacity: 1,000 l, GENERAL Features: Ball valve Dodpfxoyck R Ds Afpocc Design: Container Notes: V2A frame; manhole diameter approx. 400 mm; occasional dents may be present in the containers; two different outlet connections are fitted (see photos) Overall width: 1,020 mm Overall height: 1,520 mm Overall length: 1,220 mm Location: Bremen Nameplate: Volume: 1,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: flavours / fragrances TANK Base type: Frame EQUIPMENT Manhole / Dome: in the top plate Discharge: 28 mm Comment: minor residues

Condition: ready for operation (used), Year of construction: 2013, Nominal width: 3000mm, Working width range: 600mm-2800mm, Layers: 1, Number of chambers: 6, Heating system: Gas, Air supply: top/bottom, Max. working speed: 100m/min, Chain arrangement: horizontal, Cooling cylinders: 2, Padder: twin cylinder Matex 6000, Exhaust fan: 1, Documentation available, On site inspection is possible. Djdjyhqb Topfx Afpscc

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Djdpfx Afsk S Htxopecc Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: used, Year of construction: 1992, functionality: not functional, machine/vehicle number: 070992, For sale is our S&S hydraulic frame press, model Super, due to a recent replacement. The machine was used in our workshop for gluing window frames and features an automatic pressing cycle for mortise and tenon joints. Unfortunately, the machine is currently non-operational due to a technical issue with the associated control unit. The frame press is being sold as is. Dodpfx Aex Ruvzjfpocc

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 400 mm, total length: 3,100 mm, total width: 550 mm, total height: 900 mm, overall weight: 80 kg, power: 0.18 kW (0.24 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 3 A, Equipment: type plate available, Aluminum frame conveyor belt 310x40cm 8m/min speed sorting belt conveyor mobile aluminum frame horizontal conveyor belt for sale in excellent condition length: 3100mm belt width: 400mm full width: 480mm speed: 8meters/min drive: geared motor 0.18kw 50Hz belt material rubber fabric green color. frame material aluminum profile. Dodpfx Afjydp Tgepjcc height: 820mm adjustable/tilting legs braked wheels.

Condition: used, functionality: fully functional, mileage: 6,53,980 km, first registration: 01/2020, Year of construction: 2020, Equipment: ABS, Bluetooth, EBS, USB port, air conditioning, airbag, blind spot assist, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, onboard computer, parking air conditioner, parking heater, retarder, seat heater, second fuel tank, soot filter, spoiler, tire pressure monitoring, Single-owner vehicle, always serviced by a specialized workshop. Equipped with: High cab, full aerodynamic kit, double fuel tanks, twin bunks, front leaf springs, chassis, spare wheel. SERVICING CARRIED OUT REGULARLY, MILEAGE CERTIFIED AND GUARANTEED. Possibility of leasing and/or financing for up to 60 installments with the best rates available on the market. Dedev T In Rspfx Afpocc The description may inadvertently contain discrepancies compared to the actual specifications, which must be verified on-site. In any case, this listing does not constitute a contractual commitment. For further information and clarifications, please call the numbers provided, also available via WhatsApp direct. Contact: Paolo Antonio Gorgoni The photo set is made locally at our premises—the pictures are genuine and reflect the vehicle's current condition. Please note that the system automatically inserts equipment and optional features, so discrepancies may occasionally occur. To ensure maximum accuracy, we invite you to always verify these details directly with us.

Condition: good (used), Technical data for the workbench frame: Manufacturer: Jung Heinrich Type: T The scope of delivery includes: 02x workbench stand, used Material color: blue Stand height: approx. 910 mm Stand depth: approx. 1,050 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( welded framework ) 04x workbench crossbars, used Material color: orange Box profile: 120 x 50 mm Truss type: HN 120|20 clear width: 2,700 mm 08x locking pins, used Version: sendzimir galvanized For securing the longitudinal beams against unintentional lifting out The pictures serve to illustrate the material. The material color may vary. The workbench racks are commissioned in an assembled state; The workbench stands are pre-assembled; The production time is usually approx. 3 - 5 working days. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: Djdpfjrdy Ivex Afpocc This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, Technical data for the frame profile: Shelving system: Bito Type: PL 38 The scope of delivery includes: 01x frame profile, used Material color: sendzimir galvanized Frame profile: P 20 Profile dimensions: 90 x 65 x 2.0 mm Frame height: 2,475 mm Your contact persons in our company: Dcedpfeufw Acsx Afpsc Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transportation or shipment of this item is associated with additional additional costs, which can be requested separately depending on the or scope of delivery can be requested from us.

Condition: good (used), Technical data for the pallet rack upright: Shelf system: Hovuma The scope of delivery includes: 01x pallet rack upright, used Material color: cream white profile dim.: 85 x 50 x 17 x 3.0 mm Profile type: C 808 S275 Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( welded truss ) 6.640 mm high 870 mm deep Dcjdokwdd Ejpfx Afpjc

Condition: good (used), Included in the scope of delivery: 01x Stackable wire mesh frame, used Total weight: 27.23 kg Color: blue Total width: approx. 600 mm Total depth: approx. 800 mm Total height: approx. 950 mm Usable height: approx. 800 mm Opening size: approx. 550 x 520 mm (W x H) Mesh size: approx. 50 x 50 mm Wire thickness: approx. 3.00 mm Tube profile: approx. 22 mm Consisting of 2 foldable side panels! 01x One-way pallet, used Total width: approx. 600 mm Total depth: approx. 800 mm Dcsdpfjw Rvtajx Afpjc Height: approx. 150 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any requested transport or shipping of this item will incur additional costs, which can be quoted separately depending on the delivery location and scope.

Condition: good (used), Technical data for the frame profile: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x frame profile, new Material color: Sendzimir galvanized Frame type: P73 Profile dimension: 75 x 75 x 2.0 mm Height: 10,694 mm Your contacts in our company: Mr. Andre Evering Dodpfjx Dil Usx Afpscc Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is only available for collection. Any additional transport or shipping of this item will incur extra costs, which can be requested from us depending on the place of delivery or the scope of delivery.

Condition: good (used), Included in delivery: 01x stand protector, used Material color: yellow total height: approx. 970 mm total width: approx. 140 mm inner width (incl. foam): approx. 93 mm inside width (without foam): approx. 134 mm total depth: approx. 60 mm Material thickness: approx. 3.00 mm Hole diameter: approx. 11 mm Dcodpfx Afeikvktepjc Hole grid (HxW): approx. 700 x 50 mm Unit weight: approx. 5.87 kg - without fixing material

Condition: good (used), We offer you here a used pallet rack stand of the manufacturer Mic Spica for sale. Technical data of the pallet rack stand: Shelf system: Mic Spica Included in delivery: 01x pallet rack upright, used material colour: cream white Dedpfsgzg Skex Afpscc Frame profile: 80 x 70 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled ( screwed framework ) 2.780 mm high 1.000 mm deep