Used Grid Frame for sale (9,811)

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions Kedpfecmat Ujx Aabsnc

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Ksdpstp S E Esfx Aabjnc Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 15914, PRESS RUNNER MACHINE TYPE: EPT63 YEAR BUILT: 1999 MACHINE NUMBER:15914 MACHINE DATA Pressing force: 630 KN Idle noise: 69.2 dB Drive power: 22+4 KW Cooling: Type air TYPE OEKA-R4/1.0 Operating pressure: 260 bar Kjdporypfysfx Aabjnc Oil quantity: 285 liters. Weight: 6000kg TRAVEL DISTANCE MEASUREMENT: Overtravel: 20mm Follow-up time: 90ms Safety distance: 180mm DIMENSIONS: Installation height max: 600mm Ram stroke max: 400mm Throat: 280mm Table height: 850mm Table width: 630mm Table depth: 500mm

Condition: new, 2 Storey R-Linear Steel Frame Houses Insulated PVC Windows Throughout Boiler, Fridge, Cooker, Bathroom All New - Never Lived In Knsdpfx Asw R Tk Ajaboc Dimensions: 5m x 9.5m x 3m Weight: 12 tonnes

Condition: new, Year of construction: 2025, operating hours: 818 h, functionality: fully functional, 400 TONS MOTOR OPERATED WORKSHOP HYDRAULIC PRESS SPEC; Knodpfx Asxnm Uneabjc Tonnages : 407 Tons at 400 bars Cylinder Calibre : 360 mm, Rot Calibre:250 mm, Stroke:400 mm Motor : 15 KW 20 HP 1500 Revolutions per Minute 380 Volt Pump : 45 cc 67,5 liters 400 bar variable flow rate with power regulation(Taiwan) Lever Hand : 1 P 120 Liters Hydropax ( Import ,Erapa) Front Distance of Press : 1420 mm Side Distance of Press : 560 mm Daylight : 900 mm Stroke : 400 mm ( Safe ) Movable Cylinder : to right and left Chrome plated and hardened cylinder Emergency Button Motor : 2.2 KW 3 HP 1500 Revolutions per Minute 380 Volt Pump :4 cc 6 liters gear pump Hand Lever : 1/2 ‘’ Hydropax Advance Speed :11.05 mm/sec. Return Speed : 21,35 mm/sec. Oil Tank of Press :1200x1000x600 mm 575 liter Press Frame : ST 44 or ST 52 and Steel Welded Weight of Press : 5500 kg (+/- About)

Condition: excellent (used), Maweg Frame Press Ksdpfx Ajvy A Uxeabsnc Working length 3000mm Working height 200mm Foot width 95mm Number of vertical clamps 5 Number of side clamps 3 Hydraulic pump motor 2.2kw

Condition: used, Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: DSF-1020 SS, TIMEX Filtration System: TIMEX DSF 1020 SS Drum Stripper Filter Filter Model: TIMEX DSF 1020 SS Drum Stripper Filter Filter Type: Frame Type Flange Standard: EN 1092-1 (DIN2576) PN10 Application: N/A Service Fluid: N/A Capacity: 30 m3 /h Quantity: 1 Unit Inlet TSS N/A Knjdpfxerf U Ens Aabsc Filtration Degree: 2000 µ Filtration Area: 6 m² Drum Diameter / Length: Ø1000 mm / L: 2000 mm Inlet & Outlet Connections: DN150, PN6 Flanged Drain Connection: DN50, PN6 Flanged Working Pressure Min/Max: by Gravity Max. Operation Temp: 55oC Operation Temp: N/A Gearbox Motor Power: 1.1 kW* Required Voltage: 400 V AC / 50 Hz / 3Phz Filter Body / Pipe / Flange Material: SS316L Stainless Steel Filter Screen Material: SS316L Stainless Steel Cleaning Mechanism: Compressed Air + Water Accessories * Control Board (Std.)

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Knodpfxsvvkmbs Aabjc

Condition: used, tank capacity: 160 l, Location: Bremen Condition: used Volume: 160 liters Top: open with loose lid Design: suspended Container Mounting type: frame Heating/Cooling: available Heating/cooling jacket Bottom temperature control: double jacket Ksdexqduqjpfx Aabenc Total height: 1,100 mm Nameplate: Features Outlet: not available Remarks: Suspended design in a tilting frame made of V2A; without bottom outlet; diameter of the top opening approx. 700 mm (tapers towards the bottom; see photos) Product-contact material: V2A 1.4301 (AISI304) Material properties Jacket material: V2A 1.4301 (AISI304)

Condition: excellent (used), Year of construction: 2012, Mobile aluminum frame application tape for sale in mint condition Manufacture: MASS Length: 560-1740-560mm Height: 1750mm Travel speed: 6m/min Tape width: 190mm Total width: 260mm Track height: 250mm Frame material is aluminum, with fans on the application section. Kodpfx Aajpcdgwobenc

Condition: used, Single-column hydraulic press SCHULZ Type SES 250 . 04.86.3511/3 Year of manufacture: 1986 Pressing force: 25 tons Return force: 10 tons Throat depth: 360 mm Table size: 600 x 720 mm Ram area: 500 x 500 mm Kodjhl Npqjpfx Aabonc Clear hole in table: Ø 100 mm Clamping pin bore: Ø 40 mm Ram stroke: 400 mm Maximum installation height: 600 mm Table height above floor: 935 / 775 mm Hydraulic tank capacity: 380 liters Drive power: 7.5 kW Power connection: 380 Volt, 50 Hz - Adjustable fixed stop in the press cylinder 180 mm, with hand crank adjustment - SICK light barrier - Two-hand operation - Base made of 160 mm U-steel Space requirement (L x W x H): 1900 x 1300 x 3100 / 3260 mm Weight: 3.6 tons Good condition

Condition: used, Working width 3500 mm Working height 2550 mm Number of cylinders 6 St. loading dimensions L x W x H 4500x950x2900 mm Hess Speedy frame press ----- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Kjdpfexnqw Tjx Aabjnc Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V Image and video not original, show identical model ----- (technical data according to the manufacturer - no guarantee!)

Condition: ready for operation (used), Feed Rates (mid-rate FEEDER) kg/h [lb/h]40-40'000 [88-88'000]dm3/h Knjdpfx Aaeu Ezlwobjc [ft3/h]20-80'000 [0.7-2'800] In good working condition, ready to be used.

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Kedpfx Aexdttisabjnc Availability: Short-term – immediately –

Condition: used, tank capacity: 8,651 l, Location: Bremen Condition: used Volume: 8,651 liters Vacuum: 1.0 bar Max. overpressure: 6.0 bar Tank Max. operating temperature tank / °C: 200 °C Design: suspended Tank Base design: ring Heating/cooling: present Double jacket volume: 313.0 liters Max. permissible operating overpressure: 20.0 bar Heating/cooling jacket Max. permissible vacuum double jacket / tube space / bar: 1.0 bar Max. permissible operating temperature: 220 °C Cylinder temperature control: half-pipe coil Heating/cooling jacket Bottom temperature control: half-pipe coil Internal diameter: 2,000 mm Total height: 4,550 mm Technical Data / Dimensions Bottom wall thickness: 10 mm Cylinder wall thickness: 8 mm Technical Data / Dimensions Top wall thickness: 14 mm Technical documentation: drawing Equipment Manhole / dome: in the top Nameplate: Equipment: crane lugs Equipment Outlet (alternative entry): 105 mm Note: motor missing, manhole cover plated Remarks: Support ring made of Fe; manhole diameter approx. 480 mm; total height incl. agitator gearbox (about 3,500 mm without gearbox); last application: chemical industry Product-contacting material: V2A 1.4541 (AISI321) Material specification Temperature control system material: V4A 1.4571 (AISI316) Flange material: steel Performance: 5 / 15 kW Knedpfx Aaexqavdeboc Speed: 26.5 / 118 rpm Agitator: beam agitator Agitator Agitator arrangement: central, in the top Agitator equipment: Agitator element: frame blade agitator; agitator motor missing, but available from manufacturer; various agitator documentation available.

Condition: ready for operation (used), 6-kolomspers met 4 hydraulische zuigers opwaartse slag diameter van de zuiger: 450 mm slag: 550 mm Maximale kracht van 2000 ton max opening zonder verwarmde tafels: 780 mm max opening met verwarmde tafels: 655 mm Verwarmde tafels met stoom of olie Maximale temperatuur: 300° C Totale oppervlakte: 2000 x 2000 mm Twee tafels van 2000 x 1000 mm (kunnen samen of apart gebruikt worden) 2x 11 kW hydraulisch vermogen met invoerroltafel: 4260 x 1550 x 1250 mm Olietank op platform: 2000 x 2000 x 2500 mm Totale hoogte van de pers: 3600 mm De pers zit 920 mm in de grond Werkhoogte is 750 mm Toepassingen: - composietmateriaal Knjdev Rwftopfx Aaboc - vulkaniseren - buigen / strekken

Year of construction: 2025, operating hours: 100 h, condition: new, functionality: fully functional, The machine uses hydraulic pressure to remove the aluminum frame from photovoltaic panels. It was developed by EcoWES. It is in perfect working condition. Kjdpfxexk Uu Uo Aabjnc

Condition: used, Year of construction: 2012, total height: 1,450 mm, total length: 1,200 mm, total width: 800 mm, Type of fuel: Electric Drive: motorised Empty weight: 596 kg Knedpjwtm H Rofx Aaboc - Drive: Elektric - Year: 2012 - Documentation available: No - Serial number: ME000659 - Type: Attachment - Transport dimensions: 1200mm x 800mm x 1450mm (l x w x h) - Transport weight [kg]: 596kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, input voltage: 400 V, Equipment: documentation/manual, LiSEC, BSV-45NK, PM-45/6 Autom. Frame Bending Machine BSV-45NK + 6-slot Profile Magazine PM-45/6 Processing of aluminum, steel, stainless steel and plastic profiles. Printer and bending tools included. Connection: 3/N/PE-50 Hz, 400V, 4,58 kVA | Year: 2012. In good technical condition. Disassembled and ready for loading. Available: NOW Knsdpfjxpvutex Aabec

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm Knedpfx Aajg U Uv Rsbjc -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: used, tank capacity: 8,609 l, Location: Bremen Condition: used Capacity: 8,609 liters Vacuum: 1.0 bar Max. overpressure: 6.0 bar Tank Max. operating temperature vessel / °C: 200 °C Top head: removable / hinged top head Design: suspended Tank Support type: ring Heating/Cooling: present Double jacket volume: 313.0 liters Max. permissible operating overpressure: 20.0 bar Heating/Cooling jacket Max. permissible operating vacuum double jacket / tube space / bar: 1.0 bar Max. permissible operating temperature: 220 °C Cylinder tempering: half-pipe coil Heating/Cooling jacket Bottom tempering: half-pipe coil Internal diameter: 2,000 mm Cylindrical height: 2,190 mm Total height: 4,950 mm Technical Data / Dimensions Bottom plate thickness: 10 mm Cylinder wall thickness: 8 mm Technical Data / Dimensions Top head wall thickness: 14 mm Technical documentation: drawing Equipment Manhole / dome: in the top head Nameplate: Equipment: crane lugs Equipment Outlet (alternative specification): 100 mm Note: motor missing, manhole cover missing Remarks: support ring made of Fe; manhole diameter approx. 480 mm; tank interior with signs of corrosion (see photos); total height including agitator gearbox (approx. 3400 mm without gearbox); last use: chemical industry Product-wetted material: V4A 1.4571 (AISI316) Material properties Tempering system material: V4A 1.4571 (AISI316) Kjdsxqau Tspfx Aabjnc Flange material: steel Agitator Agitator manufacturer: Ekato Speed: 52 / 104 rpm Agitator: beam agitator Agitator Agitator equipment: agitator blade: frame paddle agitator; agitator motor missing, but available from the manufacturer; various agitator documents available

Condition: excellent (used), Year of construction: 2010, operating hours: 500 h, Natural gas turbine GE ( General Electric ) Model - Frame 9E Kedpfx Ajxni Anoabonc YOM - 2010 Frequency - 50 Hz Power - 127 MW This power plant is in excellent condition because it was used only like SUPPORT unit. So, it's coming with only approx. 500 working hours. NOTE - Also, it's important to mention, it's designed in way that with not so big investment you can increase the power up to 180 MW. Please contact us for more details. Thank you!

Condition: good (used), Code: 0119 Brand: KOLMAG - ITALY Model: PGP 600 F Ksdpfxswk Ntzs Aabsnc Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Press modular structure with heavy thick plates without weldings and worked by tool machine Oleodinamic plant with pistons prefilling system in order to have a quick opening and closing of the platens Dimensions of massive steel platens mm 1600 x 500 - Thickness mm 60 with electric resistances - Max temperature 260°. N° 3 pistons diameter mm 240 Pressure kg/cm2 56 Thrust Tonn 450 Safety photocells Hydraulic power unit Kw 7,5 Power absorbed heating platens 31 Kw Control board with pressure control gauge - Timer for platens opening - Telethermometer to regulate upper platen temperature - Telethermometer to regulate lower platen temperature - Switches for opening and closing of the platens - Emergency push button Overall dimensions mm 2250 x 1700 x 3300 h Weight kg 9000

Condition: new, Year of construction: 2025, For sawing tubes and solid materials made of stainless and tool steelTwo band speeds by means of pole-changing motorRobust gear with hardened and ground shaftPrecise and robust band guides with adjustable carbide platesLonger service life of the saw band due to saw arm inclination of 25°Efficient coolant application to the saw band guidesElectromechanical monitoring of the saw band tension, In case of deviations, a microswitch switches off the machine chip clearing brush for optimum cleaning and maintenance of the saw band function of the semi-automatic machine:Automatic workpiece clamping after the start of the cutting cycleExecution of the saw cut at the selected band speedAutonomous stop of the lowering movement and of the saw band in the lower end positionAutonomous return movement of the saw arm to its upper end positionOperator only has to move the material automaticallyEquipment:Two band speedsCut-off buttonCoolant systemChips clearance brushSaw band tension monitoringSwivelling control panelLength approx.1860 mmWidth/Depth approx.1045 mmHeight approx.1750 mmWeight approx.405 kgPower consumptionPower consumption1.5 kWElectrical dataConnection voltage400 VMachine dataSaw blade speed(s)20 - 100 m/minSpeed steplessSaw blade length2720 mmSaw blade width27 mmSaw blade thickness0,9 mmSaw blade 60 - -45 °Cutting ranges0° round (tube) Kodpfxod Hx Uqs Aabjnc

Condition: good (used), Code: 0160 Brand: SMC Model: REGO 92 CP Kjdowx Ru Ajpfx Aabenc Automatic oleodynamic clamp press with movable crossbar for wooden frames, sashes, doors, frames and various - CE Standard Technical data: Useful working dimensions mm 3000 x 2000 N° 2 horizontal cylinders N° 2 vertical cylinders Motor Kw 3 N° 2 crossbar support positions Push-button control panel Safety photocells Overall dimensions mm 3600 x 1300 x 2800 h Weight kg 1850