Used Grinding for sale (4,048)

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 26BB2444, Very well maintained surface grinder with coolant tank Isdpfx Aotk Av Aocgjtf

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 2007036, Farros BSA 5185/600 Dish Head Grinding & Polishing Machine (2007) Ijdpfx Ajy Azb Uecgotf Kombi KS 1200 grinding head 1,000mm minimum grinding diameter Internal and external grinding -20º to +30º grinding head swivel Skid framed receiver mounted air compressor and dust extraction system

Condition: refurbished (used), machine/vehicle number: 2257, Manufacturing origin France Voltage 380/50/3 Netweight 3000 kg Custom position 8460.29 20 Dimensions 2400x1550 mm TECHNICAL DATA Diameter capacity 80 mm Type 2HA : 120 mm Maximum infeed grinding length 200 mm Maximum throughfeed grinding length (with normal-type guides) 300 mm Grinding wheel : -diameter 400 mm -maximum width 200 mm -bore 203.2 mm Driving wheel : -diameter 254 mm -width 200 mm -bore 127 mm Main drive motor 11-22 kW Ijdpfx Acjfnm Iijgotf Driving wheel motor 1,1 kW Driving wheel speed 10 – 200 U/Min Standard accessories : 1 flange with grinding wheel 1 flange with driving wheel 1 workpiece support bridge 1 set of shims for workpiece support -Hydraulic dressing and trueing device for grinding and driving wheels -Variable speed drive of driving wheel -Electrical equipment for 3x380 v, 50 Hz -Main drive motor, 11 kW -Ammeter for main drive motor Starter keys and operating manual errors and omissions excepted data given without obligation.

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Itsdpfevvkipex Acgef

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Iodpjwhqprsfx Acgetf

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Itjdpjwhqpljfx Acgef

Condition: ready for operation (used), approx. 120 pieces = 480 running meters of safety conductor rails Ijdpfx Aced Hurbsgotf Number of conductors / number of poles: 5 in standard lengths of: 4 m Busbar cross section: 10 mm² for mains voltage up to: 500 V Load capacity at 100% ED: 60 A Weight per meter: 2.1 kg

Condition: good (used), Please read the technical specifications carefully. If the machine is a potential investment for you, we kindly ask that you provide full identification with a correct telephone number and email address before we can issue an offer. LOG-O-MATIC (Mainaschaff/Germany) Surface Grinding Machine FS 5030 AH Year of manufacture: 4/1991 Grinding area: approx. 500 x 300 mm Automatic vertical feed Manual longitudinal, cross, and vertical feed Accessories/Features: - Electromagnetic chuck approx. 500 x 300 mm - Manual wheel dresser on the carrier Iedpfjxz R Niex Acgjtf - Paper band filter - Coolant system - Machine lamp - Machine feet Additional accessories: - Side-, angle-, and radius dressing device - Balancing scale - Demagnetizing plate The machine is in very good condition and comes from a training facility. Available from March 2026.

Condition: used, • Throughput capacity: up to approx. 50 liters/minute • Tank volume: 0.3 m2 • Tank material: polyethylene (UV-stabilized) • Sedimentation granulate Sediflock: powder form (according to manufacturer specifications) • Sludge bag approx.: 70 kg • Compressed air: 6 bar • Power connection (depending on pumps): 2 kW, 400 V/50Hz – 3NPE • Dosing of sedimentation granulate: automatic Itsdpjywizxjfx Acgsf • Serial number – B085.23 • Further information can be found below • Price on request

Condition: new, Grinding diameter range, mm: 4-320 Max grinding depth, mm: 200 Max swing range of workpiece, mm: 480 Itodpfxey Dpqyj Acgof Swing range within the splash guard, mm: 300

Condition: used, Make: DISKUS-WERKE, Model: ModuLine DS 300 SO, Year of manufacture: 2013, Machine No.: 2219, Control system: Siemens, Model Sinumerik 840D sl, 2 spindles, spindle distance 210 mm, max. speed approx. 4000 rpm, W-tool spindle / grinding spindle 2000 rpm, max. workpiece diameter 100 mm, max. workpiece height 40 mm, 8-position tool turret, manufacturer Sauter, model 0.5.480.516, tool holder type Capto C5, workpiece automation device, manufacturer DVS, model Moduline, transfer robot manufacturer Epson, PLC system control by Siemens, display with Simatic Panel Touch, coolant system by Knoll, type KF150/950, paper band filter, chip conveyor by Knoll, type 225S-2/170 Itsdpfsx Ahg Uex Acgjf +++ Note: This machine is part of an online surplus sale! +++

Condition: used, Make: BUDERUS, Model: CNC235, Year of manufacture: 2007, Machine no.: 9030, Control system: Siemens brand, Type: Sinumerik 840D sl Powerline, 2 workspaces, 2 cross slides, X/Z traverse path, 2 spindles, Speed, C-axis workpiece spindle: 3,000 [rpm], High-frequency internal grinding spindle: (51,000 [rpm]) (for grinding arbor), Max. feeds Z 30 m/min, X 90 m/min, Max. workpiece diameter: 100 mm, Max. workpiece length: 50 mm, 2x 8-position tool turret, Tool holder: Capto C5, Workpiece automation with drag conveyor system and gripper, Coolant system, Paper band filter, Oil separator, Manufacturer: Mahle, Type: LGA601, Oil mist extraction, Recooling unit, Manufacturer: Hydac, Chip conveyor, Manufacturer: Astos Itsdpfxsx Ahivj Acgof +++ Note: This machine is part of an online surplus sale! +++

Condition: used, Make: BUDERUS, Model: U-Grind 800, Year of manufacture: 2017, Machine No.: 9438, Control system by Rexroth, Type: IndraControl V, Max. workpiece diameter: 250 mm, Max. workpiece length: 800 mm, Multifunction head by WMZ, Type MFK 54-50 (external grinding, internal grinding, hard turning, measuring), Max. speeds: C-axis workpiece spindle: 1,000 rpm, High-performance external grinding spindle: 5,100 rpm, High-frequency internal grinding spindle: 30,000 rpm, Max. feed rates: Z-axis 30 m/min, X-axis 60 m/min, Workpiece spindle by WMZ, Type W160A, Tailstock by WMZ ZN28-011-00K, Coolant system, Cooling unit by Rittal, Type SK3303500, Chip conveyor, Automation module by Upload, 1 lot of fixtures and accessories Itsdpfx Aox Ahk Hecgef +++ Note: Machine is part of an online direct sale! +++

Condition: used, Make: BUDERUS, Model: U-Grind 800, Year of manufacture: 2019, Machine no.: 2360, Control system: Rexroth, Model IndraControl V, electronic handwheel, IndraControl operator panel, Maximum workpiece diameter: 250mm, Maximum workpiece length: 800mm, Multifunctional head from WMZ, Model MFK 54-50 (external grinding, internal grinding, hard turning, measuring), Max. C-axis workpiece spindle speed: 4,500 rpm, High-performance external grinding spindle: 5,100 rpm, High-frequency internal grinding spindle: 30,000 rpm, Maximum rapid traverse: Z 30 m/min, X 60 m/min, Multifunctional head from WMZ, Model MFK 54-50 (external grinding, internal grinding, hard turning, measuring), Workpiece spindle from WMZ, Model W160A, Tailstock from WMZ ZN28-011-00K, Coolant system, Cooling unit: Rittal, Model SK3303500, Chip conveyor, Automation module from Upload, 1 lot of chucks and accessories. +++ Note: The machine is part of an online direct sale! +++ Itodpfjx Ahkmox Acgef

Condition: excellent (used), Year of construction: 2006, operating hours: 53,000 h, functionality: fully functional, Full-option CNC gear grinding machine in outstanding condition, previously used in special-purpose machinery manufacturing. The machine produces up to 200 different gear types/products for special orders in batch sizes from 1 to 10,000. Manufacturer: Reishauer Model: RZ 150 Type: CNC Gear Grinding Machine Year of manufacture: 2006 Serial number: 7XXXX Machine specifications: - 2 identical workpiece spindles - Workpiece spindles with tailstocks - Turret design - Enclosed machining area - External loading and unloading station - Especially designed for run-in gearings Equipment: - Grinding worm profiling device Reishauer RP 120 - Hoffmann belt suction filter system HSF 150 - OLAER cooling unit CD35.02-NE - OLAER designation PC31.02NE-S - ELBARON extraction/filter unit RON/A2000V-2V-RH - 5-axis robotic automation (optional) Operating data: - Total operating hours: approx. 70,569.5 h - Run-time / part counter workpiece spindle / workstation 1: counter reading 01794635 - Run-time / part counter workpiece spindle / workstation 2: counter reading 002929 Hoffmann belt suction filter system HSF 150 - Connection: 400 V / 50 Hz - Phases: 3 / PE - Operating voltage: 400 V - Connected load: 31.4 kW - Nominal current: 56.9 A - Control voltage: 24 V DC - PLC voltage: 24 V DC - Valve voltage: 24 V DC - Lamp voltage: 24 V DC OLAER cooling unit CD35.02-NE / PC31.02NE-S - Year of manufacture: 2005 - Refrigerant: R134a - Fill quantity: 2.1 kg - Max. permissible operating overpressure HD: 21.7 bar - Max. permissible operating overpressure ND: 10.6 bar - Voltage: 400 V / 3 Ph / 50–60 Hz alternative: 480 V / 3 Ph / 60 Hz - Max. current: 5 A - Power: 2.5 kW Iedjyxrygepfx Acgetf ELBARON RON/A2000V-2V-RH - Year of manufacture: 07/2005 - Weight: 74 kg - Connection: 3 x 400 V AC / 50 Hz alternative: 1 x 230 V / 60 Hz - Power: 3.56 kW - Current: 7.0 A - Protection class: IP54 - High voltage max.: 9.9 kV DC - Current max.: 24.8 mA Condition: - Machine under power - Operated in single-shift to two-shift operation - Preventatively maintained - Very well-kept condition - Comprehensive documentation available Scope of delivery: - Without tools - Without production fixtures - Without grinding wheels - 5-axis robotic automation optional - Comprehensive documentation available Availability: - Inspection by appointment - Available from 06/2026 Sales information: - Sale as seen and inspected - Warranty excluded

Condition: like new (used), Machine come with lot of additional equipement. Itodpfx Acohvr Hbsgof

Condition: good (used), Year of construction: 2008, grinding length: 1,250 mm, table length: 1,250 mm, table load: 1,200 kg, table width: 500 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 9,300 kg, travel distance X-axis: 1,400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, power: 185 kW (251.53 HP), input voltage: 400 V, space requirement height: 2,870 mm, Equipment: rotational speed infinitely variable, X-axis: grinding length 1,250 mm, travel 1,400 mm Y-axis: distance from table to spindle center 700 mm, travel 600 mm Z-axis: grinding width see note, travel 600 mm Note: The grinding area in the transverse direction (Z-axis) depends on the travel path Ijdou Hiq Rjpfx Acgjtf and the grinding wheel width. Example: Travel path across = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See pictures for more technical data

Condition: good (used), Machine is in good working condition. Itjdpjwu Exnjfx Acgjf

Condition: good (used), Year of construction: 2000, Machine is in good working condition. Magnet 600 mm Iodpfx Aerh Ipaecgetf

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Parts shown by hand not come. Technical data are in documents . Isdpouwp Epefx Acgetf

Condition: good (used), Machine is in good condition with equipment. Itsdpfewu Ey Eex Acgsf

Condition: good (used), Year of construction: 1984, Machine is in good working codition. Iedpfx Aexvikuscgetf

Condition: good (used), Year of construction: 2007, workpiece dia. 1400 mm boring diameter 100-500 mm Ijdowzmqropfx Acgotf control Sinumerik 840D

Condition: refurbished (used), grinding wheel diameter: 150 mm, year of last overhaul: 2026, disc diameter: 150 mm, grinding spindle motor power: 2,200 W, compressed air connection: 5 bar, Machine has been completely disassembled, wear parts replaced, newly painted - as-new condition. Sale includes a functional guarantee. Main features: - For re-sharpening and re-toothing of HSS segment, CV, and solid carbide saws using the CBN deep grinding process Tooth profiles A, B, Bw, and C according to DIN1840 - Grinding of variable tooth (option) - Grinding of special teeth (option) - Grinding of carbide teeth (option) - Grinding of segment teeth (option) - Freely adjustable (programmable) tooth geometry - Grinding of repair segments for segment teeth - Chamfering alternately top/bottom or on the same side - Continuously adjustable rake and clearance angles - Advanced machine protection hood for easy opening/closing Key advantages: - Short grinding times with high surface quality due to robust machine design with optimized clamping flanges for the saw blades and high drive power. - Consistent and repeatable quality through CNC control - Powerful grinding wheel drive - Fully digital servo drives (2 CNC axes) Technical specifications: - Saw blade diameter 20-550 mm - Maximum saw blade thickness 6 mm - Number of teeth 20-999 - Working speed 3-75 teeth per minute - Cooling approx. 5 bar at 40 L/min. - Grinding wheel drive 2.2 kW Itjdpjpgkgqsfx Acgef - Dimensions LxWxH approx. 1750x1200x1800 mm - Net/gross weight approx. 800/980 kg - Finish: dove blue Accessories: - Software for grinding arc tooth, angle tooth, round grinding (software extensions available on request) - Saw blade holders diameter 400, 300, 215, 140 mm (other sizes available on request) - Reducing rings diameter 16x22, 27, 32, 40, 50 mm (other sizes available on request) - Base holder for saw blade holders - Mechanical power clamping nut - Coolant system incl. high-pressure pump, mist extraction, and magnetic separator; suitable for cooling with emulsion - Automatic central lubrication with pressure monitoring (linear guides + ball screw) - Operating manual including circuit diagrams - Operating voltage: 3-phase power Trade-in of your used ECE 45 is possible.

Condition: good (used), functionality: fully functional, total height: 1,600 mm, total width: 700 mm, total length: 1,000 mm, grinding length: 250 mm, grinding width: 150 mm, grinding spindle speed: 3,150 rpm, disc diameter: 200 mm, Grinding stone diameter: 200 mm Clampingtable: 250 x 150 mm Iodpfx Aeyg E Urjcgetf Diameter magnetictable: 120 mm Spindle speeds: 11 - 3.150 Rpm Country of origin: Italy Machine LxWxH: 1.000 x 700 x 1.600 mm Machine weight: 250 kg