Used Gunther Splitter for sale (230)

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER €3,290 net including BINZEL UP DOWN HOSE PACK or Fronius AW hose package with display on the torch including connection conversion (+€500) ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose package. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful wire feed case – the wire is safely stored in the enclosed case. ➤Fronius Intermediate Hose Package (Long) – Each device comes with a 5-meter-long connecting hose package between the power source and the wire feeder case for greater flexibility and better handling. Take the wire feeder case with you to places that are difficult to reach! The connecting hose package is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) ➤Fronius Large Trolley – Arguably the best trolley with gas cylinder holder on the market. ➤Binzel Hose Package – With up/down amperage adjustment on the torch. ➤3-4m Earth Cable ➤New Messer Pressure Regulator ➤New Basket Spool Adapter for Large Wire Spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features tracer wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 450.00 The first 10 buyers of a device will receive an additional --> 2nd hose package free Currently 30+ ⭐TPS 3200 SET⭐ in stock ----- Debsum Rw Dokh Hufpokk AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any worn parts if necessary, and only then, after a successful test weld, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. Tsdpfx Abjwbillszed ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We know about these devices and don't sell anything we don't know about.

Condition: new, Hydraulic cable winch HAW1700 with electric valve incl.manual operation and radio remote control for mounting on wood splitter, crane, mini excavator, tractor, stacker, mower crawler and telescopic loader, in viticulture and horticulture, agriculture, construction and forestry and many other applications. With electric hydraulic valve and radio remote control. With the HAW1700 hydraulic winch you can make many tasks easier. Maximum cable capacity 30 m with 6 mm wire rope. Basic equipment 20 m 6 mm wire rope ⦁ Pulling firewood to the log splitter and setting it up ⦁ Pulling logs onto a trailer ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and small excavators ⦁ As a winch for small tractors and narrow-track tractors A robust steel construction with screw-on options on both sides (bottom, back, top) with M 12 thread. Tsdpfxsfn Tvhj Abzed This gives you the possibility to use the winch flexibly. Large rope pulley mounted on bearings on both sides for long service life of the wire rope. The standard pulling force is 1700 kg. The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the pulling speed and pulling force you need, we can offer you different options. Please contact us, we will be pleased to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation 380 Nm ⦁ Maxima [...]

Condition: good (used), We are selling our Möhringer OSS71 frame saw as of August/September 2025. The frame saw was completely overhauled by Möhringer in 1990 and subsequently newly installed at our facility. The machine can be inspected by appointment. It has processed only a low volume of timber. Includes roller conveyor and tension carriage. Frame opening: 710 mm x 710 mm. Stroke: 500 mm Hydraulic roller lifting with adjustable roller pressure. Infinitely variable hydraulic feed. "150 mm main shaft" Schmahl brand attachment. Numerous gauges included. Hydraulic tension carriage with auxiliary carriage from Mayerhofer. Tjdpsvx Aziefx Abzed Includes various saw blades. 55 kW main motor direct drive Shaker chute Splitter wedge (Möhringer)

Condition: used, mileage: 52,500 km, power: 110 kW (149.56 HP), first registration: 04/2011, overall weight: 9,300 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 3,250 kg, empty load weight: 6,050 kg, tire size: 335/80R22.5, wheelbase: 2,700 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, loading space width: 2,050 mm, loading space length: 2,000 mm, loading space height: 300 mm, number of seats: 3, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, crane, differential lock, fog lights, low noise, onboard computer, power assisted steering, Vehicle location: Bovenden, registration as house, 1x air suspension seat, double passenger bench, rear window, electric window left, electric window right, air conditioning, Telligent gearshift, manual 16-speed gearbox, ABS (anti-lock braking system), PTO (power take-off), differential lock, fog lights, high beam lights, work lights, beacon, storage box, aluminum tank, low-noise compliant G1, lashing eyes, roof hatch, crane mounted behind cabin, emergency stop, foldable, 2-point hydraulic outriggers, radio remote control, 3x hydraulic extensions, green environmental badge Todpfx Abow Tdvnjzod Wheelbase: 2700 mm Body: flatbed body with Hiab 022D-3 HiDuo crane with radio remote control Trailer brake system: two-line, splitter gearbox with work group, 2-circuit hydraulic system (3-chamber), engine PTO including front PTO, PTO speed limiter, fast transmission PTO with 4-hole flange! Load diagram: 3.6m - 660kg, 4.8m - 470kg, 6.3m - 350kg, 7.7m - 280kg ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, The Autobyte 3602D is an automated cutting system equipped with premium Morso guillotine blades for perfect corners in wood, plastic, and MDF. With a capacity of over 500 frames per hour, material savings are achieved thanks to the minimal saw kerf of just 1 mm (as opposed to 6 mm with conventional saws). The automatic material feeder accommodates up to 13 lengths, clamps ensure secure holding, and a splitter sorts cut pieces while removing waste. Control is via Mitsubishi touchscreen and PLC, with pneumatics supplied by SMC. Tjdjw U D E Ejpfx Abzsd

Condition: ready for operation (used), Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible. Tjdjq Ttz Espfx Abzjd

Year of construction: 2021, operating hours: 200 h, condition: like new (used), functionality: fully functional, conveyor belt speed: 3 mm/s, machine/vehicle number: IS 2R 7, 1. Eddy current separator, our type IS 2R 750, having: • - Working width: 750mm; • - Magnetic Rotor with 20 magnetic poles; • - Magnetic field made by Neodymium N45 magnets, stronger than the standard ones (N35); • - Belt made in pvc green, double ply, with n.2 strips mm 10 x 10 x 750; • - Dielectric Cylinder covered by our epoxydic mixture; • - N°2 vertical roller will keep the belt centered • - Gearmotor W75 type, 1.5 kw for the belt + 4 kw for the magnetic rotor; • - Complete frame: chassis + basic frame and discharge cap with installed one splitter (adjustable in 3 directions); • - N°4 Vibrostop installed under each machine legs (Total 16 vs); 2. Electric control panel (Loc/Rem Control) built in waterproof box (IP55), and characterized by: -Double door, external plexiglass + internal steel; -Power inverter (1 to control the magnetic rotor + 1 for the conveyor belt); o -Pctivation Relay for the vibro-feeder; -Touch Panel, installed on the second door, characterized by: ➢ 4Gb Internal memory; ➢ Sim data Slot; ➢ Ethernet port; 3. Vibro-feeder, our type C.V. 70.150, having: • - Size: width 700 x length 1.500 mm • - Table with adjustable inclination, range 5°÷7°; • - Basic frame to be fixed on the ground; Tjdowtzqkopfx Abzod • - N°2 synchronized vibrating motors, using the dual motor principle, 900 watt/each; • - Wiring in electrical junction box, installed directly on to the machine. The equipment was purchased at the end of 2021 directly from the Italian manufacturer MALAMAN C.T.C. which also installed it in our factory. The equipment works perfectly and can be tested at any time in our factory. Upon request, we can also provide installation + commissioning at the buyer's location. EXW Bucharest Price 44 800 euro NETTO

Condition: new, Hydraulic winch for wood splitter, crane, mini excavator, tractor, tractor, viticulture, horticulture and many more applications. With hydraulic winch mounted to help to many applications. -Firewood to the wood splitter drag and set up -The logs move trailer -Remove rootstocks and trees -As growing winds at Rueckekraene and small excavators -As a winch for small tractors and narrow track tractors A robust steel construction with 3-sided bolt-on option (left, right, rear) 12 threaded holes, this provides many options to attach the winch (threads are cut and painted. You must cut before using with the taps because of the rust protection). It is a 20 m long and 6 mm strong steel cable mounted. Large pulley for long service life of the steel rope. We attach the hydraulic motors from 50 to 630 CC (default = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar top Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 nm peak Torque in continuous operation: 380 nm Maximum tractive effort: 1700 kg Weight: 49 kg Line speed: 47 m / min for 60 L / min hydraulic oil Color: Red Dimensions: Length: 500 mm Pendulum length: 570 mm Front width: 120 mm Rear width: 180 mm Wide storage: + 30 mm Wide engine: Todpfx Asdf Ud Sebzed

Condition: new, LOWEST PRICE ONLINE including FREE GOODIES! 3m SPEEDGLAS G05-03 Included in delivery: - G05 helmet - Adflo - Battery - Charger - Instruction manual - Hose Plus 20 helmet lenses Gloves, 1x TIG, 1x MigMag + Heatshield Included in delivery = Images Tsdpfx Abewbuk Hjzed

Condition: excellent (used), FULL LINE (4-SIDES) of Sizing-Milling & Edge Banding, with fast automatic handling. also for NARROW PIECES (min. mm 65). With 3 full-CN drilling machines (1 for side-drilling on lenghtwise) and 1 Splitter Composed of the following machines: W05024A) Loader (gantry-portal) "RBO (BIESSE)" Mod. Winner C W05024B) 1st Single-side (Left) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN Todpfx Abotr Envozod W05024C) 2nd Single-side (Right) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024D) 1st 90° Turning device "RBO (BIESSE)" Mod. GPK-1 (Lengthwise to Crosswise) W05024E) Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB2 / 11.0 W05024F) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024G) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024H) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (Crosswise to Lengthwise) W05024I) Multi-Borer, with CN "BIESSE" Mod. Techno FDT (side-drilling on lenghtwise) W05024J) Splitting Saw (Splitter) Lengthwise "TECNOLOGICA" W05024K) Brush-cleaning machine "WANDRES" W05024L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner S

Condition: ready for operation (used), Consisting of: full tools, books and accessories available Technical Data Working range -base machine with electric equipment -in feed unit, MR -book bloc in feed with splitter -gluing unit -pre-heater and heated rounding unit -paternoster with press on unit Tedsq Aufqspfx Abzed -belt delivery 370mm x 270mm x 80mm max 125mm x 100mm x 6mm min 14 – 36 cycles per minute

Year of construction: 2023, condition: ready for operation (used), A Kohnle conveyor belt oven is available. Heating length: 1000mm, max. operating temperature: 1120°C, cooling length: 1850mm, throughput speed: 100mm-1000mm/min, channel height: 40mm, conveyor belt width: 110mm, machine dimensions X/Y/Z: approx. 5000mm/650mm/1350mm, control: Simatic HMI. Including ammonia splitter, data logger, nitrogen curtain at the front and rear and an additional pot conveyor. Documentation available. On-site inspection is possible. Expected to be available from March 2025. Todpfx Aovuafksbzod

Condition: reconditioned (used), Year of construction: 2022, EWD WD frame saw system Type GUS 71 oscillating frame saw, overhauled in 2022, consisting of: Hydraulic quick-clamp carriage H 32 III with auxiliary carriage H 25 V Todpfx Abew Agtijzsd Oscillating frame saw GUS 71: Frame size 710 x 710 mm. Stroke 500 mm. Speed 310 rpm. Fully hydraulic with oscillating frame and automatic overhang adjustment. Hydraulic saw tensioner. Saw blade hanger Jansen No. 10, insertion lugs. Motor and speed reducer. Electrical control cabinets and operator panels. Splitter wedge S 3 G with pressure rollers and spring-loaded flaps. Rails for clamping carriage. Saw system was overhauled in 2022 and not installed. The saw fits onto the base plate of WD/GXW/GXV etc.

Condition: new, Hydraulic winch for wood splitter, crane, mini excavator, tractor, tractor, viticulture, horticulture and many more applications. With hydraulic mounting winch you can simplify many applications: -Firewood to the wood splitter drag and set up -The logs move trailer -Remove rootstocks and trees -As growing winds at Rueckekraene and small excavators -As a winch for small tractors and narrow track tractors Tjdjdf Ufdopfx Abzjd A robust steel construction with 3-sided bolt-on option (left, right, rear) 12 threaded holes, this provides many options to attach the winch (threads are cut and painted. You must cut before using with the taps because of the rust protection). It is a 20 m long and 6 mm strong steel cable mounted. Large pulley for long service life of the steel rope. We attach the hydraulic motors from 50 to 630 CC (default = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar top Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 nm peak Torque in continuous operation: 380 nm Maximum tractive effort: 1700 kg Weight: 49 kg Line speed: 47 m / min for 60 L / min hydraulic oil Color: Red Dimensions: Length: 500 mm Pendant length: 570 mm Front width: 120 mm Rear width: 180 mm Wide storage: + 30 mm Wide engine: + 200 mm Height: 250 mm The winch is there to the

Condition: new, ➡️ BUSCH R5 VACUUM PUMP ➡️ RA 0040 F 503 ➡️ NEW ➡️ Tedpewdkl Esfx Abzed

Condition: excellent (used), FULL LINE of 4 Side Sizing-Milling & Edge Banding (also SOFTFORMING), through-feed drilling and splitting of panels. Complete with fast automatic handling. Composed of the following machines: A) Loader (Bridge-Frame) "RBO (BIESSE)" Mod. Winner C (1) B) 1st Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB1 11.0 Softforming C) 1st 90° Turning device (Lengthwise to Crosswise) "RBO (BIESSE)" Mod. GPK-1 D) 2nd Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB 2 9.5 E) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (straight or Crosswise to Lengthwise) F) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) G) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) H) 3rd 90° Turning device "RBO (BIESSE)" Mod. GPK-3 (straight or Crosswise to Lengthwise) Todjttgy Hjpfx Abzed I) Splitting Saw (Splitter) Lengthwise "GM (for BIESSE)" Mod. Split 4-84 LT L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner SC (2)

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for log splitter, crane, mini excavator, tractor, viticulture, horticulture and many other applications. With the hydraulic attached winch, you can facilitate many applications: - Pulling firewood to the log splitter and setting it up - Pull logs onto trailers - Pull out rootstocks and trees - As a winch for backhoes and small excavators - As winch for small tractors and narrow track tractors A sturdy steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, this offers many possibilities for mounting the winch (threads are cut and painted.) The winch can also be used as a power winch. They need to be re-tapped with the tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar peak Continuous working pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg Rope speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: length: 500 mm length with pendulum: 570 mm Width front: 120 mm Width rear: 180 mm Todpfjdf Ufpsx Abzjd Width bearing: + 30 mm Width motor: + 200 mm Height: 250 mm The winch is available for mounting or for welding on

Condition: new, - High level of protection and comfort during welding Tsdewbiq Ujpfx Abzod - Particle filter with spark arrestor, pre-filter, and 5-stage filter saturation indicator that shows the user the condition of the particle filter - Optional gas and odor filters can be used for additional protection against common gases, vapors, and unpleasant odors that can arise during welding - Automatic airflow control ensures the airflow to the headpiece is always constant. - Immediate visual and audible alarms are triggered when specified limits are continuously exceeded (battery power, airflow monitoring). The Adflo powered air respirator system draws in contaminated air from the environment, filters it through the appropriate filters, and then directs the purified air into the headpiece via an air hose. For further information on the protection levels and any usage restrictions, please refer to the operating instructions for the respective headpieces. Set: 3M Adflo Starter Kit · 1x Adflo Powered Respirator 837730 · 1x QRS Air Hose 834016 · 1x QRS Adapter 533506 · 1x Air Flow Meter 838020 · 1x Prefilter 836010 · 1x Spark Arrestor 836000 · 1x Particle Filter 837010 · 1x Li-Ion Standard Battery (approx. 8 hours) 837630 · 1x Belt 835000 · 1x Charger 833111 · 1x 3M Versaflo Safety Helmet M306 with Comfort Face Seal and Polycarbonate Visor, Clear Cheapest price online: approx. €1,100 Here for €929

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Todecr U Urjpfx Abzed Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: new, Hydraulic winch for wood splitters, cranes, mini excavators, tractors, tractors, viticulture, horticulture and many other applications. With the hydraulic winch you can make many applications easier. - Pull the firewood to the log splitter and set it up - pull logs on trailers - Pull out rootstocks and trees - As an attachment winch on back cranes and small excavators - As winch for small tractors and narrow track tractors A robust steel construction with 3-sided screwing possibility (left, right, back) with 12 threaded holes, this offers many possibilities for fastening the winch (threads are cut and painted. They have to be re-cut with a tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 ccm (standard = 400 ccm). Depending on which speed and traction you need. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg rope speed: 47 m/min at 60 L/min hydraulic oil Tsdpjdf Ua Rofx Abzod Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm width front: 120 mm Width rear: 180 mm bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm Item number: HAW1700 NOTE: Figure 1 is marked with m

Condition: like new (used), FRONIUS TPS 4000 ROBOT SET Tedjhpzunspfx Abzjd Always several devices in stock in various configurations. The prices quoted are all from ... Euro . The prices / offers are created individually according to device configuration. .) Fronius power source ( Tps4000) .) Fronius cooling unit ( Fk 4000 ) .) Fronius wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package .) Fronius RCU 5000i .) Interface = INTERBUS RUGGED LINE ( optionally available Profibus + 800 Euro or Devicenet + 1400 Euro ) New list price from the manufacturer: approx. 14000 Euro net With us 5990 Euro net. VAT can be shown. Invoice from dealer. Example pictures of the devices. In stock in Vienna 1230 ( Vienna ) Shipping on pallet possible for an extra charge : Austria ca 130 Euro Germany ca 180 Euro Europe on request

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Tjdpfxjh T Dvts Abzod Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: like new (used), FRONIUS TPS 4000 CMT AUSTRIA * We offer the devices in a wide variety of configurations and always have several sets in stock. TPS / CMT / HAND / ROBOT all in stock and available immediately! Sample images of the article. Various CMT hose packages UNIVERSAL or HOLLOW SHAFT robots. A large number of different spare parts in stock, just send us a quick email or call or Whatsapp. The prices stated are all from ... euros. The prices/offers are created individually according to the device configuration. Tsdpjhpzvwefx Abzsd SCOPE OF DELIVERY: .) Fronius power source (Tps 4000 CMT) .) Fronius cooling unit (FK 4000) .) Fronius wire feeder VR 1550 CMT or VR 7000 CMT .) Fronius intermediate hose package .) Fronius trolley optional or stand console .) Fronius hose package Robacta CMT version depending on availability .) Fronius RCU 5000i remote control or standard insert (standard operation) .) Harris pressure reducer new and in original packaging .) Ground cable 4m 50mm2 Interface optionally available for an additional charge -> Profibus approx. 800, Interbus 500 euros, Devicenet approx. 800 euros ... Also reachable via Whatsapp and Viber Stocked in Vienna 1230 (Vienna) Shipping on pallet possible for an additional charge: Austria approx. 180 euros Germany approx. 230 euros Europe on request All prices are starting from prices you can configure the devices with us. Robot device or hand device. Long connecting hose package or short. A wide variety of hose packages to choose from. Synchropuls. 270 400 or 500 amp devices in stock. Cmt version available as hand or robot. The best thing to do is to call us, we will discuss your area of application and you will receive an initial price estimate from us.

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 2500, with automatic handling. Composed of the following machines: X04004A) Double Loader "BARGSTEDT" TBH 500/D/30/14 with central motorised roller conveyor X04004B) Turning station (90°) lengthwise to crosswise "HOMAG" Mod. TDR31/25/12 X04004C) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004D) Seperation Station "BARGSTEDT" X04004E) Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFR 620 / 19 / QA / 25 Todpfelikvhox Abzod X04004F) 1° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004G) 2° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004H) Turning station (90°) crosswise to lengthwise "HOMAG" Mod. TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004M) Double Stacker "BARGSTEDT" Mod. TSP 420/40/30/12 BA with central motorised roller conveyor

Condition: as good as new (ex-display), functionality: fully functional, type of cooling: water, FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius standard intermediate hose package from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: Tedpfx Abowbh Ifozod This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.