Used Gunther Splitter for sale (163)

Year of construction: 2014, condition: used, No. 10018 Mobile 2-fraction spiral shaft screen GÜNTHER / Doppstadt SPLITTER F2 Used, year of construction 2014 Approx. 3000 operating hours Incl. mobile deck 0/120 Screening of materials that are difficult to screen, such as commercial waste, bulky waste, mixed construction waste, scrap metal, slag, waste wood, organic waste, landfill deconstruction in 2 fractions - Drive: Generator type 50 kVA / voltage 400/230 V / frequency 50 Hz / speed 1500 rpm / fuel tank capacity 250 liters / diesel fuel - Feed hopper: length 2700 mm / width 2100 mm / loading volume 3 m³ - SPLITTER screen deck / spiral shaft deck AA 254: Length 6000 mm / width 2500 mm / drive 3 x 4.0 kW controlled via frequency converter / 180 mm pitch / separating cut 0-80/120 mm - Feeder belt FH: Length 3000 mm / Width 1200 mm / Drive 1 x 4.0 kW controlled via frequency inverter / Folded design, incl. hopper for receiving the discharge belt on the shredder / Chevron belt quality - Bottom grain collecting belt, longitudinal FC: Length 5600 mm / Width 1200 mm / Drive 1 x 3.0 kW / Permanent magnetic separation / Chevron 16 mm belt quality - Bottom grain collecting belt crosswise FC: length 1600 mm / width 1000 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile undersize discharge conveyor: length 4460 mm / width 1000 mm / drive 1 x 4.0 kW / can be extended by FE fraction / belt quality Chevron 16 mm - Oversize grain collecting belt FC: length 5300 mm / width 1200 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile oversize grain discharge conveyor: length 7350 mm / width 1700 mm / drive 1 x 5.5 kW / can be extended by FE fraction / discharge height 5000 mm - Control cabinet: Complete electrical control via a PLC in a central control cabinet (protection class IP55) / Control and visualization via Siemens S7 colour touch panel / Radio remote control with colour display for all travel and work functions - Mobility: Electric crawler/tracked chassis with rubber pads / Electro-hydraulic control of moving parts - Power generator: 50 kVA, water-cooled 4-cylinder diesel engine - Throughput: up to 60 t/h (depending on material) Transport dimensions approx. 13600 x 3000 x 3100 mm LWH Weight approx. 21000 kg Sold on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Errors in the description and price reserved Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Hedpswhza Usfx Abkok Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: refurbished (used), functionality: fully functional, The Günther Injector Model: PI 54/105 is a versatile, industrial-grade brine injector designed for high-precision injection into meat, poultry, fish Precision & Output High Injection Accuracy: Features a position-controlled brine valve and a needle-bridge system to ensure the highest injection precision and uniform brine distribution throughout the product. Hjdpfxsxxphfj Abksk High Throughput: Capable of up to 50 strokes per minute, ensuring high production capacity (estimates around 4,000 kg/h for the 54-needle configuration). Versatile Product Handling: Ideal for injecting products with or without bone across various applications (meat, poultry, fish). Adjustable Injection: Brine pressure is adjustable from 0.5 to 4.0 bar, allowing customization based on product density and desired injection percentage. Control & Hygiene MC2R Touch-Screen Control: Equipped with the MC2R-control with touch-screen, offering user-friendly operation and full automation potential. Recipe Storage: Includes 100 memory spaces for recipe storage, allowing for rapid product changeovers and consistent quality control. Automated Cleaning: Features an automatic sanitation program and a complete separation of the pump cycle from electromechanical components, minimizing maintenance and maximizing hygiene. Adjustable Clearance: The product passage height is typically 220 mm, with infinitely variable stroke height selection to precisely match the product being processed. Integrated Filtration: Supported by an inline-filter system (often electronically supervised) or optional automatic rotary filters, ensuring brine purity and protecting the pump system.

Condition: used, Injector Electric power: 5.5kW Dimensions: 80x160x240cm Hedpfsyab Dcsx Abkek

Condition: used, functionality: fully functional, Tumbler with cooling system Manufacturer: Gunther Model: GPA 500K Made of stainless steel Dimensions: 2200 x 1650 x 2550mm Hodowd I E Ajpfx Abksk Volume: 500 liters Electric power: 3.5kW

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, We offer a Günther injector for meat, fish, and cheese, type PIH57M from 2017 – a compact, automatic machine for injecting brine and marinade with a capacity of 30 l/min. The device has been designed for the processing of meat, poultry, fish, and cheese, where even distribution of brine, improvement of taste and color, and increased yield of the finished product are important. The PIH series is specially designed for the requirements of poultry and fish injection, with a high needle density for the best possible distribution of brine in the product. The Günther PIH57M injector operates at 400 V, 1.6 A, 50 Hz, requires 6 bar compressed air and provides a capacity of up to 30 l/min with an installed power of 2 kW. The set includes a brine filter, documentation and spare parts, which facilitates quick implementation of the machine into production and subsequent servicing. Technical data: Manufacturer: Günther Maschinenbau GmbH Type/model: PIH57M Hedpfx Aeyibhqobkek Year of manufacture: 2017 Application: injection of meat, poultry, fish, cheese Power supply: 400 V, 50 Hz Current: 1.6 A Operating pressure: 6 bar Capacity: up to 2000 kg/h Number of needles: 57 Needle diameter: 3 mm Maximum product height: 150 mm Working width: 280 mm Power: 2 kW Equipment: filter, documentation, spare parts Machine dimensions: L: 1800 x W: 800 x H: 2500 mm Their outstanding features are: Rugged construction Compact design High injection accuracy Easy operation Easy to maintain High flexibility Easy to clean

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 06742-H106-000-000, conveyor belt width: 800 mm, conveyor belt speed: 1,400 mm/s, total width: 1,066 mm, power: 3 kW (4.08 HP), axle spacing: 5,300 mm, construction width: 1,066 mm, Axle distance: 5,300 mm Belt width: 800 mm Construction width: 1,066 mm Side plate height: 270 mm Conveying speed: 1.4 m/s Belt quality: EP 400/3 3:1.5 mm Standard quality Profiling: steep conveyor belt, PB 550 mm / PH 17 mm Drive: drum motor, Van der Graaf brand Power: 3.0 kW Motor protection class/Efficiency class: IP 66 / ISO F Drive drum: Ø 215 mm (drum motor) Hsdpjyh Aqksfx Abkek Lagging: metallic surface Return drum: Ø 190 mm, crowned Bearing: maintenance-free tensioning bearing Ø50 mm Carrying rollers: Ø 63.5 mm with buffer rings Carrying roller interval: 600 mm Carrying roller bearing: maintenance-free Return rollers: 2 pieces Ø 89 mm Side guide rollers: 2 pieces Ø 50 mm, L = 120 mm Tensioning station: threaded spindle M16 Special design: transfer chute, free discharge

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 06742-H101-000-000, conveyor belt width: 1,420 mm, conveyor belt speed: 1,700 mm/s, total width: 1,420 mm, power: 4 kW (5.44 HP), axle spacing: 2,450 mm, construction width: 1,420 mm, Center distance: 2,450 mm Belt width: 1,200 mm Overall width: 1,420 mm Cheek height: 310 mm Hjdpfeu S Adrjx Abkjk Conveyor speed: 1.7 m/s Belt quality: EP 400/3 3:1.5 mm normal quality Profiling: Steep conveyor belt, PB 900 mm / PH 32 mm Drive: Van der Graaf drum motor Power: 4.0 kW Motor protection class/efficiency class IP 55 / IE3 Drive drum: Ø 215 mm (drum motor) Rubber coating: Metallic surface Idler drum: Ø 190 mm, spherically turned Bearing: Maintenance-free radial insert ball bearing Ø50 mm Support rollers: Ø 63.5 mm fitted with buffer rings Idler spacing: 500 mm Idler bearing: Maintenance-free Return rollers: Ø 63.5 mm / support ring Ø 108 mm Side guide rollers: Ø 50 mm Clamping station: M16 threaded spindle

Condition: used, Tumbler with cooling system Manufacturer: Gunther Model: GPA 300K Hodpfx Aotrgunebksk Made of stainless steel Volume: 300 liters Capacity: 200kg Dimensions: 1950x1000x2100mm Electric power: 2.5kW

Condition: used, Injector Gunther Type: PI 26 Number of needles: 26 Hsdpfxow Ra Rps Abksk Needle diameter: 4 mm Max. product width: 340 mm Cycles per minute: 15 to 55 cycles/min Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0.5 to 4.0 bar Electric power: 3 kW Voltage: 400 V Current: 16 A Machine dimensions (cm): Width: 70 Length: 170 Height: 200

Condition: used, Injector Manufacturer: Gunther Hodpfxjui Iylj Abksk Model: PI 52 Number of needles: 52 Needle diameter: 4 mm Tact per minute: 15 to 55 tact/min. Product passage height: 220 mm

Condition: used, Type: PI 54 Number of needles: 54 Needle diameter: 4 mm Max product: width 340 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 8kW Machine dimension in cm: Width: 85 Length: 200 Height: 230 Delivery time: 30 working days after advanced payment Hsdpfx Ajk R Tqcsbkjk

Condition: excellent (used), Year of construction: 2017, Stock no.: 503657 Machine type/ Device type: Hot Runner Control Unit Manufacturer: Günther Model: DPT 5 Year of manufacture: 2017 Electrical Data: Connection voltage: per phase 200-250V AC, 50 to 60Hz, typically star connection Star connection: 3-phase network with neutral, 200-250V between L and N Delta connection: 3-phase network without neutral, 200-250V between two phases Load connection: IOA per channel (fuse 10A ultra-rapid = FF 10A) and 1 channel per phase with 16A (see maximum load per phase!). Phase load (5 channels per phase): maximum 25A Protection rating: IP 20 Dimensions: (W, H, D) 468mm x 142mm x 345mm Weight: 13.0 kg Hsdpoxx Tmrsfx Abksk Enclosure color: grey / blue (RAL 9018 / RAL 5015)

Condition: excellent (used), Year of construction: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine / Equipment Type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of Manufacture: 2019 SUPPLY VOLTAGE Per phase 200–250 VAC, 50 to 60 Hz, typical. Star connection: 3-phase network with neutral conductor, 200–250 V between L and N. Delta connection: 3-phase network without neutral conductor, 200–250 V between any two phases. LOAD CONNECTION 16A per channel (protection: 16A fast-blow fuse, "FF 16A") Phase load: maximum 32A Phase L1: Channels 1 - 6, 19 - 24 Phase L2: Channels 7 - 12 Phase L3: Channels 13 - 18 MAXIMUM OUTPUT DPT6: 7.3 kW (1 x 32A) LOAD TYPE Resistive loads only permitted SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free relay contact (max. 230V/1A, not fused) BOOST INPUT Connection for a potential-free relay contact POWER CABLE CEE plug 32 A (configured for star wiring) HOT RUNNER CONNECTION (HK) Load connection: 2 x 24-pin HAN-E female sockets Thermo connection: 2 x 24-pin HAN-E male sockets FUSES Load output fuse: FF 16A, 6.3 x 32mm, Schurter SA type Control fuse: slow-blow 2A, 5 x 20 mm SERIAL INTERFACE RS232, TTY, (RS422, RS485) Interface protocols available for Arburg, Mannesmann, Krauss-Maffei, Engel, and others. OUTPUT Continuous via pulse group control CONTROL RANGE Adjustable from 0 to 700°C / 0 to 999°F DECREASE (SETBACK) Adjustable from 0 to 200°C / 0 to 360°F INCREASE (BOOST) Adjustable from 0 to 100°C / 0 to 180°F SAFETY SHUTDOWN Adjustable from 0 to 700°C / 0 to 999°F DATA BACKUP Power-failure resistant, data retention for at least 10 years STORAGE TEMPERATURE 0 to 70°C OPERATING TEMPERATURE 0 to 40°C HUMIDITY Storage: 30% - 80%, non-condensing Operation: 40% - 70%, non-condensing Hodpoxx Ti Tsfx Abkjk PROTECTION CLASS IP 20 DIMENSIONS (W x H x D) 362 mm x 180 mm x (depth missing) Approx. 16.0 kg HOUSING COLOUR Aluminum / blue / grey (RAL 9006 / RAL 5002)

Condition: used, Year of construction: 2023, No. 10017 Two-fraction star screen GÜNTHER MULTISTAR ONE / MS ONE Used, year of construction 2023 Approx. 200 operating hours Mobile star screen for screening waste wood, biomass, green waste and other screenable materials in 2-fractions as well as for overlength recycling - Input material: specific weight 200 - 650 kg/m³ / moisture max. 55% / piece size and individual weight max. 1000 mm and 20 kg / material feed with conveyor belt or wheel loader / throughput capacity up to 200 m³/h - Control, operation, switch cabinet: Type PLC / Operation display, control panel / Manual or automatic operating mode / Power supply AC 400 V, 3P, 50Hz via 32A plug on site - System interlinking: 16-pin plug connection / Cable (15 m) incl. winding device on base frame / Screen deck overrun for EMERGENCY STOP / Dummy plug in control cabinet door - Hydraulic support legs: 4 hydraulic support legs / Increase the discharge height of the useful fraction by 450 mm / All support legs can be controlled individually - Feed hopper: Capacity approx. 2.5 m³ / Feed height 2500 - 3000 mm / Free throw-in length 2300 mm / Conveying medium scraper chain conveyor with maintenance-free flat link chain / Drive 2.2 kW adjustable via frequency inverter - Collecting belt: Center distance 4600 mm / Belt width 1000 mm / Belt type smooth / motor 2.2 kW, v=1.2 m/s - Connect: Connect! is the innovative telematics solution from Komptech / overview of operating status, error messages, statistics, GPS localization, capacity utilization - Petrol-powered hydraulic pump - HyDrive System 2.0 MS ONE - Screen deck 60/90: Output: 0-60/90 and > 60/90 mm / Length 4500 mm / Width 1450 mm / Screen area 6.5 m² / Position 11° incline / Star shafts 17 pieces / Star diameter 340 mm / Star width 55 mm / Center distance 266.5 mm / Cleanstar cleaning elements / motor 2 x 4 kW / Adjustable via frequency inverter - Drive motors 50 Hz: motors for driving the screen deck / 2x 4 kW 50 Hz - Dosing roller: width 1560 mm / diameter 215 mm / drive 3 kW drum motor - FKAB with magnetic drum: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined / Belt type profiled, 15 mm chevron / 3.0 kW motor, v=2.2 m/s / Usable discharge height 3500 mm - 3950 mm / Multi-pole magnetic drum in permanent version / incl. discharge chute - Over-grain discharge conveyor: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined, 220° pivoting / Belt type profiled, 15 mm chevron / motor 3.0 kW, v=2.2 m/s / Usable discharge height 3600 mm - 4050 mm Transport dimensions approx. 8176 x 2466 x 2600 mm LWH Weight approx. 9200 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Hsdpfx Aewhy T Tebksk Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: excellent (used), functionality: fully functional, Manufacturer: Günther Type: DP15/10 10 sections With cable Hodpfx Abewqgxhokek

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 06742-H103-000-000, conveyor belt width: 1,600 mm, conveyor belt speed: 1,700 mm/s, total width: 1,854 mm, power: 2.2 kW (2.99 HP), axle spacing: 4,450 mm, construction width: 1,854 mm, Center distance: 4,450 mm Belt width: 1,600 mm Overall width: 1,854 mm Cheek height: 240 mm Conveyor speed: 1.0 m/s Belt quality: EP 400/3 4:2.0 mm normal quality Hjdeu T Ewwjpfx Abkok Profiling: Steep conveyor belt, PB 1290 mm / PH 17 mm Drive: Van der Graaf drum motor Power: 2.2 kW Motor protection class/efficiency class IP 66 / ISO F Drive drum: Ø 160 mm (drum motor) Rubber coating: Metallic surface Deflection drum: Ø 175 mm, spherically turned Bearing: Maintenance-free radial insert ball bearing Ø 50 mm Idlers: Ø 63.5 mm Idler spacing: 500 mm Idler bearing: Maintenance-free Return rollers: Ø 63.5 mm Side guide rollers: 2 pieces Ø 120 mm with grooved ball bearings Tensioning station: M16 threaded spindle

Condition: used, hot runner control device Günther DPT 10 10x fach 230 Volt price: 1.850 Euro Hsdpfx Aoh Uucfobkek contact: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 2000, functionality: fully functional, Offered is a brine injector Günther PI-17 needle, year of manufacture 2000. Hedpfxew R Tv So Abkek In good condition, 380V, 16A. Further details on request. Cash payment or advance payment. Sale to commercial customers only. No warranty, no liability.

Condition: good (used), functionality: fully functional, Offered is a Günther PI-17 needle pickling injector. The impeller is new, as is the pressure gauge. 380V, 16A. Further details upon request. Cash payment or advance payment. Sale to businesses only. No guarantee or warranty. Hedev Saflspfx Abksk

Condition: excellent (used), Oferuję używaną prasę hydrauliczną renomowanej marki Obolith, przeznaczoną do produkcji elementów betonowych, takich jak pustaki, bloczki, cegły itp. Dane techniczne: • Producent: Obolith • Typ: Prasa hydrauliczna / wibroprasa • Napęd: Elektryczno-hydrauliczny • Stan: Używana, sprawna • Zasilanie: 400V • Solidna, stalowa konstrukcja • Wbudowana forma (możliwość wymiany na inną) • Pulpit sterowniczy z wyłącznikiem awaryjnym Hsdpfewpxynjx Abkjk • Możliwość uruchomienia na miejscu.

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts one unique panel) - Minimum length of the workpiece: mm 250 (ca.) - Maximum length of the workpiece: mm 2700 (ca.) - Minimum width of the workpiece: mm 124 (ca.) - Maximum width of the workpiece: mm 1200 (ca.) - Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) Hjdpeyx S N Uefx Abkek - Max feeding speed: m/min 50 (ca.) - Total installed power Kw 82 Along with the following groups: POS. 1 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 2 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 3 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 4 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 5 Lower main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) POS. 6 Upper main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) OPTIONAL: soundproof and safety enclosure (cabine)

Condition: used, machine/vehicle number: 003935, Max Panel Width: 1200 mm Max Panel Length: 40 mm Max feed speed: 60 m/min Hedswucknepfx Abkek Operating Units: 3 nr

Condition: new, Year of construction: 2026, CORMAK RPL380 Firewood Processor (Saw–Splitter Machine) Key features and functions: Performance: Efficient operation with capacity of up to 8 m³ of wood per hour, depending on wood type. Multifunctionality: Combines a chainsaw, log splitter, and conveyor belt in one machine, increasing efficiency and saving time. Versatility: Suitable for both professionals and individual users; capable of processing various types of wood. Engine: 15 HP petrol engine delivers high power for efficient cutting and splitting. Time-saving: Wood processing time is significantly reduced thanks to the integration of three functions in one unit. Reliability: Designed for use in sawmills, the wood industry, and for firewood or construction wood production. Equipment: Features a STIHL chainsaw guide bar and an oil tank located at the rear of the housing. Precision: Cross wedge enables effective splitting, while cutting can be performed to the desired length. Adjustment: Wedge height can be easily adjusted to match log diameter using a lever. Safety: Built-in safety systems protect the operator. Mobility: Equipped with wheels and a tow hitch for easy transport between work sites. Conveyor system: The belt feeds wood into the splitter and then carries away split logs. It can be folded in half and positioned vertically. Certifications: CE certified and supplied with full technical documentation (DTR). Powerful 24L hydraulic system drives: ✅ Feed conveyor ✅ Cutting saw ✅ Splitting cylinder with up to 20 tons of force ✅ Output conveyor The machine is equipped with a 9-stage adjustable splitting wedge, allowing logs of different diameters to be split into 2 or 4 pieces. ✅ Adjustable cutting length ✅ Log holding clamp ✅ Central chain lubrication system Technical Specifications Engine Model: Lancin G420F Power: 9.0 kW (15 HP) Displacement: 420 cc Fuel: Petrol Fuel tank capacity: 5.4 L Starting system: Electric / manual (recoil) Recommended engine oil: 15W40 (1.7 L) Hydraulic System Hydraulic oil tank capacity: 24 L Recommended hydraulic oil: HL46 / HL32 Hedpfx Aoyw I Epobkek Performance & Cutting Parameters Max splitting force: 20 t Splitting wedge: 4-way Max log diameter: 380 mm Min / max cutting length: 190–600 mm Chainsaw bar length: 18” (45 cm) Capacity: approx. 8 m³/h Feed Conveyor Length / height: 1000 mm / 910 mm Dimensions (L × W): 1040 × 254 mm Max incline angle: 40° Output Conveyor Dimensions (L × W): 3200 × 254 mm Speed: 27 m/min Wheels & Tires Size: 135/70R12 Pressure: 2.5 bar Dimensions & Weight Machine dimensions: 6600 × 1380 × 2000 mm Weight: 680 kg

Condition: new, Year of construction: 2026, Motor power 9.5 kW Splitting force 20 tons Voltage 400 V / 50 Hz Working pressure 16 - 20 MPa Cylinder Ø101.6 x 610 mm Maximum log diameter 480 mm Maximum log length 610 mm Cycle time 6 - 8 s Return time 3 s Splitting wedge 6-arm Oregon guide bar 22" Chain 74 links, 0.375 Saw/splitter drive hydraulic motor/gear pump Ejector length 3.2 m Conveyor belt (outfeed belt) 6800 x 250 x 4 mm Tires 13" Shipping dimensions (W x L x H) 2250 x 1000 x 1200 mm Weight 820 kg Features: 20-ton splitting force – effective splitting of larger logs. Electric drive – economical, quiet, and clean operation without exhaust fumes. Hydraulic feed and pressure – stable log guidance and improved operator safety. Ejector angle adjustment – ​​modify the direction of split biomass removal. Hydraulic guide and lift adjustment – ​​conveniently adjust the position of the working material. Hjdjyx D E Ijpfx Abkjk Cutting and splitting function – one tool for two key woodworking operations. Sturdy construction – a durable and stable frame for intensive use. Ergonomy and work comfort – intuitive operation and convenient settings increase productivity. Versatile use – suitable for farms, workshops, and firewood processing. Wedge, 8-piece knife - price €130 (paid additionally). Wedge, 4-piece knife - price €100 (paid additionally). Hydraulic log feeder for firewood processors - price €1,150 (paid additionally).

Condition: excellent (used), I will sell a stone or granite splitter. - serviced, no leaks in very good condition. For sale: Obolith Steinwerke GmbH - semi-automatic press with roller conveyor Hedpewpxzfjfx Abkok I offer a more advanced hydraulic press with automatic collection by roller conveyor, ideal for serial production of precast concrete elements. Specification: • Manufacturer: Obolith Steinwerke GmbH • Model: With roller conveyor • Company inscription: “Stein-reich an Ideen” • Foot operation (start pedal) • Safety switch and external controller • Electric-hydraulic drive • Solid frame, designed for intensive use Ideal for automation of block, hollow block, curb production processes.