Used Hazardous Waste Containers for sale (8,257)

Condition: good (used), Year of construction: 2013, Hazardous materials container, REI 90 / F 90 fire protection storage type WFP, cantilever racks, internal lighting, loading ramp, leakage sensor – used - : Price ex location: €29,500 (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Denios Year of manufacture: 2013 Model: BMC-X 600-K-T90-2 Model: REI 90 / F 90 Fire Protection Storage WFP-X 14 Room system surface finish External coating: RAL 9002 grey white Internal coating: RAL 9002 grey white Door coating (both sides): RAL 9002 grey white Dimensions (mm) Internal | External (without attachments) Width: 2,560 | 2,952 Depth: 5,500 | 5,938 Height: 2,500 | 2,924 Sump capacity Steel sump: 1,560 litres Door placement: short side Stainless steel door handle with anti-panic function: 1 pc Technical ventilation fire protection system: 1 pc Exhaust air monitoring: 1 pc Door holding device single-leaf door: 1 pc Loading grate for pallet truck, WFP 14: 1 pc Cantilever racks: 8 pcs Ex-proof internal LED lighting 42 watts: 1 pc Steel loading ramp suitable for pallet truck: 1 pc Surge protection: 1 pc Leakage sensor SpillGuard Connect: 1 pc Emergency exit sign (fluorescent): 1 pc Control unit: 1 pc • Safety storage for water-polluting substances (WGK 1-3) as well as flammable, toxic, and oxidizing substances according to GHS • Roof and sidewalls made of fire-resistant cladding (EI120) with fire protection from both inside and outside. Floor fire protection via suitable substructure on-site • Roof drainage via integrated gutter with internal downpipes at each short side • Manufactured to DIN EN 1090-2 • Flexible indoor or outdoor installation on a concrete surface • Frame structure designed to meet static requirements • Constructive potential equalization by grounding the steel frame structure • Hot-dip galvanized steel sump made from S235JR (material no. 1.0038) to DIN EN 10025, 5 mm material thickness, corrosion protection for at least 5 years • Leak tightness test of the sump according to EN ISO 3452-1 with factory certificate • No ground clearance. Not suitable for underpassing by industrial trucks • Front lugs for securing the room system to the concrete base Gedjyzc Dhspfx Af Asit • Corrosivity class C3-M according to DIN EN 12944, part 1 • Single-color 2K PUR coating in RAL color tone • Self-closing fire protection door with overhead door closer and anti-panic lever set, lockable by cylinder lock with Euro profile 17mm • Convenient access thanks to low door threshold of 147 mm • Storage area with hot-dip galvanized, removable grating supports • Demountable transport brackets on the roof section II 2(1) Ex emb[ia] IIC T6) Cantilever racks Internal lighting Loading ramp Leakage sensor SpillGuard Connect Original price: €49,000 Condition: good – very good. No spills; only closed containers were stored inside. Availability: immediately Location: 79312 Emmendingen, Germany Detailed offer data available as PDF on request.

Condition: good (used), Year of construction: 2001, functionality: fully functional, KAMPWERTH SHD 1600 horizontal baler, incl. 3 interchangeable containers 48000x2800x3000 Paper baler // Waste baler // Refuse baler Baler, 1 unit • Type: Kampwerth SHD 1600 Giodjxm Skropfx Af Ajt • Year of manufacture: 2001 • Unladen weight: 3,500 kg • 15 kW • Dimensions: 5000x2300x3700 mm (disassembled for transport) Container box for baler, 3 units • Year of manufacture: 2001 • Volume: 28 m³ • Unladen weight: 3,100 kg • Filling weight: 12,000 kg • Dimensions: 7000x2400 mm Location: Bielefeld

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, second choice Manufacturer: Weber Depth lid closed: 755 mm Depth lid open: 770 mm Height 1,320 mm Lid closed Total width: 1,350 mm Capacity: 360 kg Volume: 770 liters Further data / information: Material color of garbage can: black Lid material color: yellow Gijdpfx Aeku Aw Nof Aot Usable width: approx. 1,085 mm Usable depth: approx. 640 mm Usable height: approx. 1,000 mm Material: polyethylene (PE) Tires: 4 tires (2x braked) Tare weight: 68 kg Note: Effective width and effective depth are tapered towards the bottom. General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, Roll-off container with lid Skip container, bin container Year of manufacture: approx. 2000 Capacity: approx. 4 m³ Internal length: approx. 300 cm Internal width: approx. 160 cm Loading edge height: 80 cm Unladen weight: approx. 800 kg Permissible total weight: approx. 8,000 kg - Steel sheet lid, divided in two per side - Steel partition wall in the middle of the container - 4 lifting hooks for skip loader truck or crane transport - Tipping joint on both sides Gijdpfx Aex N Ikvjf Ast - Heavy-duty construction made from thick material Required space (L x W x H): 320 x 180 x 125 cm Good condition 3 units available Price per unit

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, Wet waste press press container Bergmann MPB405 SN/10 for skip loader 10cbm usable volume tested, serviced, fully functional Painting in desired RAL color possible Giedpovmwpwofx Af Aot We would be happy to make you an offer including delivery.

Condition: good (used), Waste oil collection container -Container: Ø 660 x 1250 mm Giodpob A Hfzofx Af Ajt -Container: tiltable -Weight: 30 kg

Condition: good (used), Year of construction: 1973, Waste compactor, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container -Stationary press for: interchangeable containers -Load chute: covered -Pressing process: hydraulic -Pressing process: automatic -Emergency safety switch: at the deposit slot -Piston dimensions: 1450 x 650 mm Gjdpfsb A Ii Ssx Af Aoit -Piston stroke: 1100 mm -Transport dimensions: 2100 x 4500 mm -side threaded ratchets for skip containers -Functionally tested

Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), overall weight: 65,000 kg, tire size: 6*2, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 3 axles, emission class: euro3, Year of construction: 2026, machine/vehicle number: V9638J96, Equipment: all wheel drive, hydraulics, onboard computer, Sand and Gravel Production Plant | MINGYUAN Heavy Industrial Equipment A sand and gravel production plant is an integrated system designed for producing high-quality construction aggregates, including sand, gravel, crushed stone, and artificial sand. MINGYUAN provides complete aggregate crushing and screening solutions for quarries, mining, construction, and infrastructure projects, ensuring efficient material processing and consistent output. General Introduction The MINGYUAN sand and gravel production line combines advanced crushing, screening, washing, and conveying equipment to process raw materials such as limestone, granite, basalt, river stone, and quartz into various sizes of construction sand and gravel aggregates. The plant typically includes jaw crushers, impact crushers, cone crushers, vibrating screens, sand washers, belt conveyors, and dust collectors, forming a complete and automated production system. It is widely used in road construction, concrete batching plants, building materials, and hydropower projects. Capacity range: 30–1000 tons per hour (customizable) Feed size: ≤800 mm depending on crusher type Output size: 0–5 mm (sand), 5–10 mm, 10–20 mm, 20–40 mm (gravel) Main equipment: Jaw crusher (PE/PEX series), cone crusher, impact crusher, VSI sand maker, vibrating feeder, vibrating screen, sand washing machine, belt conveyor, and control system Power configuration: Electric or diesel-driven options available Automation: PLC control with real-time monitoring and adjustable output ratio MINGYUAN Heavy Industrial Equipment Co., Ltd. provides complete sand and gravel production solutions with reliable performance, competitive price, and professional after-sales service for global customers in the mining, construction, and cement industries. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: Godsq Nia Ijpfx Af Asit - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. Keywords Sand production line, gravel production plant, aggregate crushing plant, stone crusher, sand making machine, sand washer, vibrating screen, jaw crusher, cone crusher, impact crusher, VSI crusher, quarry equipment, mining machinery, construction aggregates, artificial sand, crushed stone, river gravel, limestone crusher, basalt crusher, granite crusher, sand washing plant, screening plant, conveyor system, MINGYUAN sand plant, aggregate processing equipment, stone crushing line, sand and gravel washing system, high-efficiency crusher, environmental sand plant, aggregate production line manufacturer.

Condition: new, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: electric, color: silver, overall weight: 27,000 kg, empty load weight: 27,000 kg, operation weight: 36,000 kg, maximum load weight: 50,000 kg, tire size: 6*2, tire condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, machine/vehicle number: MYM-J57C90, Equipment: hydraulics, low noise, rubber tracks, Mobile Crusher: Smart C&D Waste Recycling Solution Turn Demolition Debris into Profit Construction and demolition waste accounts for 30-40% of global waste. Our mobile crushing solution processes C&D waste on-site, transforming costly debris into valuable recycled aggregates. Technical Specifications 900×1060 Mobile Jaw Crusher Crusher Unit: Jaw opening: 900mm × 1060mm Max feed size: 750mm Output size: 75-200mm (adjustable) Capacity: 80-180 TPH Power: 90-110 kW Vibrating Screen: 2-deck or 3-deck configuration Screen area: 3.6-4.8 m² Motor power: 15 kW Produces 3-4 aggregate sizes simultaneously Feeder: Belt width: 1000mm Variable speed: 0-25 m/min Power: 7.5 kW Hopper capacity: 5-8 m³ Overall: Dimensions: 12-14m (L) × 2.8-3.2m (W) × 3.8-4.2m (H) Weight: 38-45 tons Total power: 120-150 kW Fuel consumption: 25-35 L/hour (diesel option) What We Process ✓ Concrete (plain & reinforced) ✓ Asphalt pavement ✓ Bricks and masonry ✓ Tiles and ceramics ✓ Mixed demolition debris ✓ Road construction waste Complete Recycling Process 1. Feeding Large hopper (5-8 m³) receives mixed C&D waste up to 750mm 2. Primary Crushing 900×1060 jaw crusher reduces material to 75-200mm with 4-6:1 reduction ratio 3. Magnetic Separation Automatic removal of steel rebar (>95% recovery rate) 4. Screening Multi-deck screen produces multiple grades: 0-5mm (sand) 5-10mm 10-20mm 20-40mm 5. Dust Control Integrated water spray system (8-12 nozzles) achieves >90% dust suppression Key Features Mobility: Track-mounted: Self-propelled, 0.8-1.2 km/h Wheel-mounted: Highway transportable Setup time: 30-60 minutes 360° working radius Automation: PLC control system Remote operation (50m range) Real-time monitoring Automatic overload protection Performance: Concrete: 120-150 TPH Asphalt: 100-130 TPH Mixed waste: 80-120 TPH Screening efficiency: >95% Output Products Recycled Aggregates: 0-5mm: Concrete, mortar (15-20% output) 5-10mm: Asphalt mix, drainage (20-25%) 10-20mm: Concrete, road base (25-30%) 20-40mm: Sub-base, backfill (25-30%) Applications Building demolition Highway reconstruction Bridge dismantling Airport runway recycling Disaster debris management Urban renewal projects Service Package Included: Factory testing Installation supervision Operator training (3-5 days) 12-month warranty Lifetime technical support Godpeq Nf Tvjfx Af Aoit Spare parts availability Get Started Transform C&D waste from cost to profit. Our 900×1060 mobile crusher delivers proven performance, exceptional ROI, and environmental sustainability. Contact us for: Detailed specifications Custom configurations Site assessment Equipment demonstration Competitive quotation Make waste work for you. Choose proven mobile crushing technology for sustainable C&D recycling.

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. Giedpfx Afjq N Ud Io Ajt 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: excellent (used), Year of construction: 2002, total length: 6,060 mm, total width: 2,440 mm, total height: 2,600 mm, Trencor 20FT ISO Tank Container 25,000 L UN PORTABLE, T11, bottom discharge steam heating design temperature: -40 to +130°C valid 2.5-year inspection until 03/2027 = Further Information = General Information Year of manufacture: Aug. 2002 Model year: 2002 Suitable for: Chemicals, construction water, fuel, wastewater Weights Tare weight: 3,695 kg Payload: 32,305 kg Gisdpfxoy Ay Tvj Af Ajt Gross weight: 36,000 kg Functional Lading compartment volume: 24,690 l Superstructure brand: Van Hool 24,690L TC, 2 compartments (12,290L/12,400L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Visual condition: average Additional Information Please contact Arne Honingh for further information.

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Gisdpfx Afewfq T Sj Ajt Discharge of scrap from under the machine directly to the container.

Condition: good (used), Year of construction: 1998, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, 1998 MTK 20FT swap body tank container 31,000L / 1 compartment bottom discharge UN PORTABLE, T7 steam heating 5-year test/CSC: 07-2027 = Further information = General information Year of manufacture: Dec. 1998 Model year: 1998 Suitable for: Chemicals Weights Empty weight: 4,275 kg Payload: 29,725 kg Gross weight: 34,000 kg Godpfxoyrtd Se Af Asit Functional Cargo compartment volume: 26,000 l Body brand: HOLVRIEKA 26,000L TC, 1 compartment, L4BN, IMO-1, T11 Number of compartments: 1 Condition Technical condition: good Visual condition: good

Condition: new, functionality: fully functional, power: 260 kW (353.50 HP), fuel type: electric, color: dark red, overall weight: 42,000 kg, operation weight: 42,000 kg, chain condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, The construction industry is moving away from the "build-demolish-dump" cycle and toward Urban Mining. At the heart of this shift is the Mobile Stone Crusher, a powerhouse designed to turn piles of jagged concrete and brick into high-quality recycled aggregate right on the job site. --- ## 1. The Engineering Logic: From Waste to Wealth In a traditional setup, demolition waste is hauled to a landfill—a process that is expensive, carbon-heavy, and wasteful. A mobile crusher flips the script. It brings the factory to the waste. By processing materials on-site, contractors save on transport costs and produce "Road Base" or "Sub-base" materials immediately. ### Key Components of a Mobile C&D Plant: * Vibrating Feeder: Uses a "Grizzly" bar system to pre-screen fines (dirt/sand) so the crusher only works on the big stuff. * Crushing Unit: Usually a Jaw Crusher (for primary compression) or an Impact Crusher (for better grain shape and higher reduction ratios). * Magnetic Separator: This is the "secret sauce" for C&D waste. It pulls out rebar and scrap metal that would otherwise contaminate the recycled aggregate. * Discharge Conveyor: Transports the finished product to a stockpile. --- ## 2. Technical Specifications & Performance When evaluating these machines, "Throughput" ($TPH$ or Tons Per Hour) is the metric that matters. For C&D recycling, the machine must handle unpredictable feed sizes and varied material hardness. ### Typical Technical Specifications Table | Feature | Specification Range | Why it matters | | --- | --- | --- | | Throughput | 100 – 500 $t/h$ | Determines project timeline efficiency. | Gsdsq I Nvijpfx Af Asit | Max Feed Size | 500mm – 1,100mm | Dictates if you need a hydraulic breaker first. | | Power Source | Diesel-Electric or Hydraulic | Dual power (Electric) is better for urban noise/emissions. | | Crusher Type | Jaw or Impact | Impactors provide a more "cubic" final product. | | Mobility | Crawler Tracks | Essential for moving over uneven rubble piles. | --- ## 3. The "C&D" Specialization Recycling construction waste isn't just about "breaking rocks." It’s about cleaning material. Modern mobile units are equipped with: 1. Over-belt Magnets: Specifically designed to lift heavy steel reinforcement bars (rebar) out of the crushed concrete flow. 2. Dust Suppression: High-pressure misting systems to keep neighbors happy and workers healthy in tight urban environments. 3. Active Pre-screening: Removing sticky soil or asphalt fines before they enter the crushing chamber to prevent "plugging." > The Insight: Using a mobile crusher can reduce project carbon footprints by up to 40% simply by eliminating the "truck-in, truck-out" logistics of aggregate management. --- ## 4. Maintenance and Longevity Because C&D waste is highly abrasive (and often contains "surprises" like wood or plastic), maintenance is non-negotiable. * Jaw Plates: Must be flipped or replaced regularly to maintain the "Closed Side Setting" (CSS), which determines the size of your output. * Blow Bars: In impact crushers, these are the high-wear items that take the brunt of the force. --- Would you like me to compare the cost-effectiveness of Jaw vs. Impact crushers for a specific type of demolition project, or perhaps look into the environmental regulations regarding on-site crushing?

Condition: new, functionality: fully functional, Year of construction: 2026, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Giedpfx Afovn D I No Ajt Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Model: PE600X900 Max input size: 500mm Capacity: 80-135 t/h Motor: 75KW Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. You can leave us a message if you need a different model or a different type of crusher. Gisdoq H Shcjpfx Af Ast

Condition: new, Year of construction: 2025, container length: 20 ft, NEW CONTAINER / ONE WAY / Year of manufacture 2025/ 2026 +Lock box Gsdpswut Nbsfx Af Aeit +Forklift pockets Color: RAL 5010 , RAL 7016, RAL 7035, RAL 6007, RAL 9010, RAL 7042, RAL 7015

Condition: used, 20DV DUO OFFICE CONTAINER FROM Berlin ✅ Container type: Duo office container / double container 20DV ✅ Condition: only used indoors, used, watertight, without equipment, windows on one side, laminate flooring will be installed on site ✅ Dimensions (LxWxH) per container: 6,058 x 2,438 x 2,800 mm – clear interior height 2,500 mm Gjdpjy Sbgvofx Af Aeit ✅ Availability: from Berlin ✅ Price is net per DUO unit ✅ Transport: Free and non-binding delivery quote (including unloading if requested) – just provide your postcode ✅ Variety: In addition to office containers, we also offer shipping containers in all standard sizes (20DV, 40DV, 20HC, 40HC, …) for storage, construction projects, logistics solutions, or sea transport Contact us now – we’re happy to advise you! NAUTEXA GmbH – Your container partner

Condition: used, Offered are used 20DV office containers. CONTAINER TYPE: Office container 20DV CONDITION ON DELIVERY: Used, wind- and waterproof, without equipment, original pictures. All containers are equipped with electrical installation and heating, the entrance door is located on the short side. Containers are sold in used condition and may show defects, contaminations, color differences, rust, etc. Gsdpfx Ajy Sbgpjf Aoit DIMENSIONS LxWxH: 6058 x 2438 x 2800 mm, internal clear height 2500 mm. AVAILABILITY: Immediately TRANSPORT: Please provide your postal code so we can send you a free and non-binding offer for the containers including delivery and, if necessary, unloading from the truck. VARIETY: We also offer sea containers in all common sizes (20DV, 40DV, 20HC, 40HC, …) to suit any requirement. Whether for storage, construction projects, logistics solutions, or sea transport. We look forward to hearing from you! NAUTEXA GmbH

Condition: new, Year of construction: 2024, NEW ONE WAY CONTAINER Year of manufacture 2025/ 2026 Godpfjg S Adlex Af Asit with lock box with forklift pockets

Condition: new, Year of construction: 2025, NEW with fork lift pockets with lock box YOM 2025 several RAL colors Giodog S Acrepfx Af Aet

Condition: new, Year of construction: 2026, functionality: fully functional, Tank Container: 20-foot steel box container with integrated 25,700-litre polyethylene tank (wall thickness 1cm). Suitable only for non-hazardous products (water, oils, alcohol, etc.), not for ADR materials. Temperature resistance down to -40 degrees Celsius. 1. Condition: new, unused, with valid CSC plate 2. Volume: 25,700 litres 3. Decompression valve 4. Working pressure closure: 7 bar 5. Spare parts included: decompression valve, outlet valve, manhole cover 6. Custom colour included 7. Company logo included 8. Tank can be removed 9. Transport: Free & non-binding delivery quote (including unloading, if required) – simply provide your postcode. 10. Original pictures 11. Immediately available from Hamburg We look forward to your enquiry! Gedpjy Saxdefx Af Ajit NAUTEXA GmbH

Condition: used, Offered here are used 40HC storage containers available from Kornwestheim, Duisburg, Hamburg, Frankfurt, and other locations depending on availability. Prices vary based on the location. CONTAINER TYPE: 40HC Storage Container Gjdpfjy Saxkox Af Aeit CONDITION: Used, wind and watertight, cargo worthy, wooden floor, sample pictures DIMENSIONS LxWxH: According to ISO standards. External dimensions: 12,192 x 2,438 x 2,896 mm. Internal dimensions: 12,032 x 2,352 x 2,698 mm. Door opening: 2,343 x 2,585 mm. Volume: 76.2 m³. Weight: 4,000 kg. TRANSPORT: Please provide us with your postal code so we can issue you a free and non-binding offer for the container including delivery and, if required, unloading from the truck. VARIETY: We also supply sea containers in all common sizes (20DV, 40DV, 20HC, 40HC...) for any purpose, whether for storage, construction projects, logistics solutions, or sea transport. We look forward to hearing from you! NAUTEXA GmbH

Condition: used, Used workshop containers offered from Korbach, Germany. CONTAINER TYPE: Workshop container, office container CONDITION ON DELIVERY: Used, fully functional EQUIPMENT: - Exterior lighting - Heating - Fire extinguisher - Ramp - Electric roller shutter door - Electrical system 65 Amp. - Three-phase power connection DIMENSIONS (LxWxH): approx. 5 x 4.05 x 4.20 m Weight: 7,000 kg DELIVERY: approx. 2 weeks lead time TRANSPORT: Please provide your postcode so that we can offer you a free and non-binding quotation including delivery and, if necessary, unloading from the truck. Godoy Saxwjpfx Af Aoit SELECTION: In addition, we offer sea containers in all standard sizes (20DV, 40DV, 20HC, 40HC...) for any application, whether for storage, construction projects, logistics solutions, or sea transport. We look forward to your inquiry! NAUTEXA GmbH

Condition: like new (used), We offer as-new 20DV open top/hard top (removable roof for top loading) shipping containers from Hamburg. CONTAINER TYPE: 20DV open top/hard top shipping container Giodpoy Rzn Djfx Af Ajt HIGHLIGHTS: Easy top loading, suitable for bulk materials DELIVERY CONDITION: As-new, wind and watertight, cargo worthy, with CSC plate, wooden floor, original pictures DIMENSIONS (L x W x H): According to ISO standard External: 6,058 x 2,438 x 2,591 mm, Internal: 5,898 x 2,352 x 2,390 mm, Door: 2,338 x 2,280 mm Volume: 33.1 m³ Weight: 2,200 kg TRANSPORT: You can provide us with your postal code so we can offer you a free and non-binding quote for the container including delivery, and unloading from the truck if required. VARIETY: We also stock shipping containers in all standard sizes (20DV, 40DV, 20HC, 40HC, etc.) for all needs – whether for storage, construction projects, logistics solutions, or sea transport. We look forward to your enquiry! NAUTEXA GmbH