Used Height Micrometer for sale (35,448)

Condition: used, machine/vehicle number: H2X388V00629, Year of construction: 2019, operating hours: 18,779 h, load capacity: 4,500 kg, lifting height: 3,700 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 4,500 kg Lifting height: 3,700 mm Fork length: 2,400 mm MACHINE DETAILS Drive type: Electric Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,450 x 2,800 mm Dead weight: 8,000 kg Battery: 80 V, 775 Ah Battery voltage in idle state: 83.1 V Dedps Ahq R Tefx Aidowd Service valid until: UVV valid until: 07/2027 Operating hours: 18,779 h EQUIPMENT Fork positioner with side shift Integrated scale Facelift model with tilt angle indicator Windshield with windshield wiper Roof panel Lateral fall protection White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the front Safety light at the rear Comfort seat with lumbar support and seat heating Hydraulic valves: 3rd and 4th valve All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible at a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 74

Condition: used, machine/vehicle number: H2X391G50377, Year of construction: 2016, operating hours: 6,836 h, load capacity: 2,000 kg, lifting height: 4,620 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 4,620 mm Lift: Full free lift Fork length: 1,200 mm MACHINE DETAILS Mast: Triplex mast Fuel: LPG Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,150 x 2,200 mm Weight: 3,290 kg UVV (Occupational Safety) certificate valid until: 09/2027 Next service due in: 204 operating hours Operating hours: 6,836 h EQUIPMENT Side shifter 3rd hydraulic valve 4th additional hydraulic valve, free for fork positioner Semi-cabin Windshield wiper Non-marking white tires LED work light, front LED work light, rear Orange warning light Safety light, front Safety light, rear Comfort seat with lumbar support Seat heating LPG gas exchange bottle Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Dwjdpfx Ais Ahrafsded Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 213

Year of construction: 2026, condition: like new (used), Properties: → robust machine housing made of cast iron → automatic loading and unloading of the test force → change between lens and indenter automatically → LED lighting → digital measuring eyepiece → LCD color display touch screen → Conversion to other hardness scales (e.g. HRC) → easy to use Technical data: → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) → Test method Vickers → Eyepiece 10X → automatic Revolver → Objectives 10X / 20X / 40X → Test force application 50µm/sec → height Capacity max. 210mm → depth Capacity max.160mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Standard delivery: → Hardness tester → Diamond indenter 136° Vickers → Flat Anvil Ø80mm → V-Anvil Ø80mm Dodpfx Ajc Ipc Ueidjwd → Eyepiece → Objectives 10X / 20X / 40X → LED lighting → Power cable → Accessory case → Operating instructions OPTIONALS: → VMS3-Software (Video-Measuring-System) → X/Y-Stage 200x200mm (Movement 25 x 25mm) → Digital micrometer (to transmit the edge distance to the VMS3-Software) → “Automatic measurement” module (only in combination with VMS3-Software)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 126 m², suction capacity: 10,300 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, negative pressure system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Brand: ESTA Model: DUSTEX F-126 The filter is cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean side, which minimizes the risk of explosion. Parameters: Maximum capacity - 10300 m3/h Dwodpfxo Aignws Aidjd Filtration area - 126 m2 Cartridge filter inserts - 6 pcs. Motor power - 11 kW Inlet diameter - 2 x 300 mm Device dimensions: Height - 3.90 m Width - 2.12 m x 1.35 m Base - 1.47 m x 1.03 m Stock number: 0030

Condition: good (used), Year of construction: 2006, Arburg 370U 600-290 (2006) CLAMPING UNIT Dwodpj Aid Srsfx Aided Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A Clamping force: 60 t Screw diameter: 35 mm Shot weight: 132 g Distance between tie bars V: 270 mm Distance between tie bars H: 270 mm Shot volume: 144 cm3 Type: Horizontal Drive: Hydraulic

Condition: used, machine/vehicle number: 91632679, Year of construction: 2018, operating hours: 16,042 h, overall weight: 1,500 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Drive type: Electric Battery voltage: 48 V Battery capacity: 375 Ah Battery voltage at rest: 50.5 V Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 1,400 mm Self-weight: 1,500 kg Service valid until: 09/2027 UVV (occupational safety) certificate valid until: 09/2027 Operating hours according to display: 16,042 h EQUIPMENT White, non-marking tires Road legal lighting with turn signals Previously a Jungheinrich full-service unit All dimensions are approximate. No warranty is given for typographical or measurement errors. Collection conditions: Dedpfs Ahrf Sex Aidjwd Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 329

Condition: used, Centrifugal Pump, Pump, KSB Etabloc-GN 50-200/1852, Used machine Manufacturer: KSB Type: KSB Etabloc-GN 50-200/1852 Year: 2003 Overall dimensions: Width: 810 mm Dodpfoy Nnnbsx Aidswd Depth: 350 mm Height: 400 mm Weight: 130 kg Electrical data: 400 V; 18.5 kW; 32.5 A Flow rate: 72 m³/h Head: 51 meters

Condition: used, Bosch Rexroth 5.5 kW industrial hydraulic power unit with Lammers motor, Used Machine POWER UNIT / HYDRAULIC TANK (BOSCH REXROTH): Manufacturer / Brand: Bosch Rexroth Kft. Work Order No.: 3285684/30 Type: RRG Conversion Year of Manufacture / Week: 2011 / Week 20 Tank Capacity: 100 litres (dm³) Recommended Oil Grade: HV 46 Design: Robust blue-painted steel hydraulic tank with oil level indicator and inspection/cleaning opening. Operating Pressure: 80 bar Maximum Pressure: 160 bar DRIVE MOTOR: Dodpfxozzc S Ne Aidewd Manufacturer / Brand: LAMMERS Elektromaschinenfabrik (Rheine, Germany) Type: 12AA 132S-4 Power: 5.5 kW (50 Hz) / 6.05 kW (60 Hz) Speed: 1440 rpm (50 Hz) / 1725 rpm (60 Hz) Voltage: 400/690 V (Δ/Y) Current: 11.3 / 6.55 A Protection Rating: IP55 (Class F insulation) OVERALL DIMENSIONS: Width: 770 mm Depth: 580 mm Height: 1400 mm

Condition: used, Year of construction: 1987, machine/vehicle number: 6004.01, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: CNC-controlled precision cylindrical grinding machine Condition: fully mechanically overhauled Machine weight: approx. 3.5 t Work Area Grinding diameter: 350 mm Grinding length: 1,000 mm Center height: 175 mm Workpiece weight: max. 120 kg Spindle and Drive Drive power: 5.5 kW Speed: max. 25,000 rpm Control System Control system: FMS 5-88 EQUIPMENT Extensive range of accessories Coolant system Dwodpfj Aa Anfox Aidod Electronic handwheel Separate control cabinet Safety emergency stop

Condition: used, Roller conveyor, 860cm Dwedpfo Ait Ntjx Aidod Length: 860cm Width: 780mm Height from the ground: 800mm Divided into two sections.

Condition: used, Year of construction: 1967, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: Universal tool and cutter grinding machine Machine weight: approx. 3.1 t Travel distances X-axis travel: 1,100 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Spindle and milling head Distance spindle/table: 9–509 mm Swivel range of spindle head: 360° Spindle mount: SK 40 Spindle speed: 30–2,066 rpm Speed stages: 27 Milling head: original Huron adjustable milling head, adjustable in 3 dimensions Horizontal milling: possible Feed and rapid traverse Feed rate: 1.6–820 mm/min Feed stages: 27 Rapid traverse X-axis: 2.8 m/min Rapid traverse Y-axis: 2.8 m/min Rapid traverse Z-axis: 1.4 m/min Work table Clamping surface: 1,435 × 460 mm Performance data Total power requirement: 10 hp Dimensions Width: approx. 2.36 m Height: approx. 1.65 m Depth: approx. 1.45 m EQUIPMENT Original Huron adjustable milling head Dodpfo Aa Au Ssx Aidowd Handwheels for X, Y, and Z axes Feeds for X, Y, and Z axes Safety machine main switch Adjustable work light Coolant system Heidenhain digital display

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS SPINDLE Speed range: 240–2,240 min⁻¹ MILLING TABLE Table dimensions: 730 × 200 mm Djdpfo Aduqmsx Aidjwd Number of table slots: 3 MACHINE DETAILS MACHINE Machine type: Horizontal milling machine Manufacturer: Hermle Model: FW710 DIMENSIONS AND WEIGHT Length: 1,500 mm Width: 1,200 mm Height: 1,600 mm Weight: 400 kg EQUIPMENT 3-axis digital display, Heidenhain

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Dwjdpfx Aie Adu N Nsdod Manufacturer: Kuhlmeyer Type: EBS21 Machine type: Belt grinder Grinding Area Grinding length: approx. 3,000 mm MACHINE DETAILS Dimensions Length: 5,000 mm Width: 1,500 mm Height: 1,600 mm Weight: 500 kg

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Schoen Type: SH/LF100 Year of manufacture: 1985 Machine type: Hydraulic press PRESS Pressing force: 100 t Table dimensions: 1,200 × 1,200 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Dwjdpfo Adu Ryjx Aidjd Length: 3,000 mm Width: 2,000 mm Height: 3,200 mm Weight: 12,000 kg

Condition: ready for operation (used), Year of construction: 1964, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Clamping force: 68.6 kN Table Table dimensions: 600 × 600 mm Number of slots: 4 Electrical data Operating voltage: 380 V Connected load: 4 kW Power: 1 kW Dwedps Advcdofx Aidjd MACHINE DETAILS Manufacturer: Reis Type: 60A/7H Machine number: 48/64 Year of manufacture: 1964 Machine type: Embossing press Dimensions and weight Length: 1,500 mm Width: 1,300 mm Height: 3,000 mm Weight: 3,000 kg EQUIPMENT 4 slots in the table

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 200 kg, arm reach: 3,000 mm, working height: 11,200 mm, TECHNICAL DETAILS Dwedpfx As Afm H Nsidod Working height: max. 11.20 m Platform height: max. 9.20 m Lateral reach: 3.00 m Load capacity: max. 200 kg Turret rotation range: 345° MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2.62 x 1 x 1.99 m Platform dimensions: 0.69 x 0.93 m Self-weight: 2,970 kg Drive and Battery Drive type: AC electric drive Battery type: AGM Battery voltage: 24 V Battery capacity: 200 Ah Operating hours: 1 h EQUIPMENT Non-marking tires

Condition: used, empty load weight: 949 kg, Year of construction: 2023, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Permissible total weight: 3,500 kg Unladen weight: 949 kg Payload: 2,551 kg MACHINE DETAILS Sideboard height: 200 mm Maximum permissible speed: 100 km/h (with appropriate approval) Dwjdpfxj Afm Tvo Aidsd EQUIPMENT Double-acting hydraulic cylinder for tilting the loading platform Wooden floor instead of side rails All-round sideboards with tension rod locks Wheel shock absorbers for 100 km/h approval

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS CONTROL Control system: Deckel Contour 12 WORK AREA Table dimensions: 800 x 480 mm Number of table slots: 7 Travel range X-axis: approx. 400 mm Travel range Y-axis: 400 mm Travel range Z-axis: 400 mm Dwjdpfx Ais Adzl Rodod TOOL HOLDER Tool holder: SK 40 MACHINE DETAILS Manufacturer: Deckel Maho Model: FP3-50 Machine type: CNC milling machine Serial number: 2860-151 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 24 A Length: 3,000 mm Width: 2,400 mm Height: 2,400 mm Weight: 3,000 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: AGME Type: RR1-6 Machine type: Coordinate drilling machine Number of machines: 4 units ELECTRICAL DATA Total connected load: 0.25 kW WORK TABLE Table area: approx. 250 × 230 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,000 mm Dwsdpfx Ao Adzw Hoidod Width: 800 mm Height: 800 mm Weight: 500 kg EQUIPMENT Digital displays

Condition: used, Year of construction: 1995, machine/vehicle number: UWIIA/3472/95, grinding wheel diameter: 300 mm, grinding length: 400 mm, center height: 150 mm, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: Universal CNC tool grinding machine Condition: very good Working Area Grinding diameter: max. 300 mm Grinding length: 400 mm Workpiece length: 520 mm Center height: 150 mm Distance between centers: 350 mm Grinding table stroke: 550 mm Grinding Table Table speed: 0.005–5.0 m/min Grinding Spindle Grinding spindle speed: 250 / 3,750 / 5,000 / 7,500 rpm Speed stages: 4 Grinding wheel diameter: max. 250 mm Swivel range of grinding spindle head: 11–60° Drive power of spindle motor: max. 3.0 kW Control and Axes Dodpfx Ais Aa Aipedewd Control: Siemens 810 G3 Axes: 4 Performance Data Total power requirement: 7.7 kW EQUIPMENT Electronic handwheel Spindle lead correction Hydraulic collet chuck FORKARDT OVERZ-BR Coolant system Automatic central lubrication Enclosure with movable viewing window at the operator station Separate control cabinet Safety emergency stop on the control cabinet Machine light Siemens servo drives

Condition: used, Year of construction: 2018, operating hours: 6,955 h, machine/vehicle number: M542 8DC D01, repeat accuracy: 0.02 mm, working length: 4,000 mm, working width: 2,000 mm, Work area 4m x 2m, traverse speed 17.8 m/min, linear axis accuracy ±0.0127 mm, repeatability ±0.02 mm, Z-axis travel 305 mm, 610 mm, acceleration 0.1 g, circle accuracy ±0.0635 mm, pump pressure 3,800 bar, mobile operator station, touchscreen, LED lighting for status indication, software FlowXpert (integrated 2D/3D CAD/CAM software), pure water cutting, conventional abrasive waterjet cutting, height sensor Dynamic Contour Follower, splash guard, laser edge finder, TECHNICAL DETAILS Work area X-axis: 4,000 mm Work area Y-axis: 2,000 mm Material support area: approx. 4,100 x 2,100 mm Z-axis travel: 305 mm / 610 mm Programmable Z-axis travel: approx. 305 mm Traverse speed: 17.8 m/min Linear axis accuracy: ±0.0127 mm Repeatability accuracy: ±0.02 mm Acceleration: 0.1 g Circle accuracy: ±0.0635 mm Cutting speed increase through DWJ technology: up to 4x MACHINE DETAILS Waterjet system Pump pressure: 3,800 bar Cutting angle through beam compensation: 90° Table load capacity: approx. 2,441 kg/m² Operating hours: 6,955 h EQUIPMENT Mobile operator station Touchscreen LED status display FlowXpert software with integrated 2D/3D CAD/CAM function Pure water cutting system Conventional abrasive waterjet cutting system Secondary Z-axis for pure waterjet Programmable, servo-driven Z-axis Dynamic Contour Follower – automatic height sensing Djdps Ahgrtefx Aidjwd PASER 4 Dynamic Waterjet (DWJ) cutting head technology Automatic compensation of natural beam bending Splash guard Laser edge finder Abrasive desliming system Stainless steel beam catcher Continuously adjustable water level regulation for quiet underwater cutting Clamping and tensioning system Distributed drive system with covered ball screws Two-part steel table construction Vibration-damping separation of tank and guide system Abrasive desliming system, stainless steel beam catcher, water level regulation, clamping and tensioning system, secondary Z-axis pure waterjet, standard abrasive waterjet, programmable Z-axis, Z-axis (height adjustment): approx. 305 mm (programmable, servo-driven), water level control: fully adjustable for underwater cutting (low noise), drive: distributed drive system with covered ball screws, cutting head technology: PASER 4 Dynamic Waterjet (DWJ), compensates for natural beam bending, for precise 90° cuts at high speed (up to 4x faster), table load: high load capacity (approx. 500 kg/sq ft), table construction: two-part steel construction, separation of tank and guide system for vibration damping, material support area: approx. 4,100 mm x 2,100 mm.

Condition: used, Year of construction: 1984, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Material data Material width: 350 mm Coil weight: 1 t Material thickness: 0.5–6 mm Coil inner diameter: 380–540 mm Coil outer diameter: 1,500 mm Reel Dodpfs Aaz T Tjx Aidswd Reel weight: 1.3 t Reel dimensions Width: 1.7 m Depth: 1.5 m Height: 1.6 m EQUIPMENT Reel

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Pressing force: 30 t Table dimensions Length: 480 mm Width: 400 mm Dwsdpfx Aie Adunreded MACHINE DETAILS Manufacturer: Bruderer Type: BSTA 30 Machine type: Punching machine Condition: Refurbished Dimensions Length: 1,100 mm Width: 800 mm Height: 2,000 mm Weight: 3,000 kg EQUIPMENT Feed control

Condition: used, Year of construction: 2021, operating hours: 7,593 h, load capacity: 4,500 kg, lifting height: 3,180 mm, mast type: duplex, fork length: 2,200 mm, No minimum price – guaranteed sale to the highest bidder! Djdpfx Aie Ahq Rzsdswd TECHNICAL DETAILS Load capacity: 4,500 kg Lifting height: 3,180 mm Fork length: 2,200 mm MACHINE DETAILS Mast type: Duplex Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 5,600 x 1,500 x 2,400 mm Dead weight: 6,413 kg UVV valid until: 04/2027 Next service due in: 564 hours Operating hours: 7,593 h EQUIPMENT 3rd + 4th valve Free-lift mast without central hydraulic cylinder Formerly a Still full-service unit Hydraulic fork positioner Side shifter Full cab Heater Windshield wiper White, non-marking tires LED work light (front) LED work light (rear) StVZO lighting with turn signals for road approval Comfort seat with lumbar support Seat heating All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if the machine is not collected on time. Outstanding storage fees must be paid in full before collection. Lot number: 32

Condition: used, machine/vehicle number: H2X388H00203, Year of construction: 2017, operating hours: 11,137 h, load capacity: 3,500 kg, lifting height: 4,100 mm, mast type: duplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 4,100 mm Mast type: Duplex mast Free-lift mast: Without central hydraulic cylinder Fork length: 1,200 mm MACHINE DETAILS Drive type: Electric Battery voltage: 80 V Battery capacity: 775 Ah Battery voltage at rest: 85.0 V Operating hours: 11,137 h Dimensions & Weight Dimensions (L x W x H): 4,000 x 1,500 x 2,904 mm Service valid until: 07/2027 EQUIPMENT Former Linde full-service unit Facelift model Tilt angle indicator Fork positioner Side shifter Full cabin Heater Windshield wiper White, non-marking tires LED work light (front) LED work light (rear) Safety light (rear) Comfort seat with lumbar support Seat heating Hydraulic valves: 3rd and 4th valve All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. Dwodpj Ahq Sfjfx Aidod A storage fee of €20 per machine per day will be charged if the machine is not collected within the specified time. Any outstanding storage fees must be paid in full before collection. Lot number: 77