Used Length Measuring Instruments for sale (36,176)

Year of construction: 2014, condition: new, digital length measuring device, manufacturer: Heidenhain, ID 355 533-04 Ksdpfxeb T Uqij Anusnc Measuring scale, type LF 481 – Signal 1Vss – Measuring length 200mm.

Condition: used, Instrument Systems Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for the precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices come from a laboratory environment, manufactured in 2007–2008, and represent high-quality industrial measurement technology. Scope / included components CAS 140C-152 Spectrometer (2008) Integrating Sphere ISP250-110 + ISP250-211 (2008) LEDGON 100 Goniophotometer (2007) CSD315 3-axis Controller + Emergency Stop Control Panel (2007) Keithley 2611 SMU / SourceMeter PC system including software: SpecWin Pro SpecWin Light Goniometer module Original license CDs User manual “LED test sockets” Cables & accessories as shown in the photos Technical features Measurement of total luminous flux (lumens) Spectral analysis (color temperature, CRI, xy, spectrum) Goniophotometric angular measurement Analysis of radiation patterns Electrical control and IV measurements with Keithley 2611 Fully automatic measurement sequences with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating Sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Kedpfx Anozimaaoujnc Dimensions / weights (total approx. 40–45 kg) Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 1973, functionality: not functional, machine/vehicle number: 1709, SIP MUL-1000 universal length measuring machine with a comprehensive set of original SIP accessories. Manufacturer: SIP – Société Genevoise d’Instruments de Physique, Geneva/Switzerland Year of manufacture: 1973 Machine number: 1709 Measuring range: approx. 1,000 mm Knedpszz Hq Asfx Anuec The machine is offered expressly in its current condition, without any guarantee regarding functionality or accuracy. Oil was detected in the area of the scale/measuring system. A detailed fault diagnosis or repair has not been performed. Therefore, the machine is not sold as being in working order. Inspection and your own technical assessment on-site in Mönchengladbach are strongly recommended.

Condition: good (used), For sale is a universal length measuring device with numerous accessories from the brand Helios, in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Helios Messtechnik • Type: 27 773 001 • Control model: Unitron 2 CHA • Universal length measuring device / adjustment device / shaft measuring device • With numerous accessories for various measurements Kjdpfezxiv Nsx Anujnc • Mounted on a workshop trolley with contents (See pictures) • Condition: Used, functional (The cable or connector of the control unit would need to be replaced, presumably not original; the display turns off after a few seconds) Shipping costs via freight forwarder: approx. €140 International buyers are welcome! You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on board. Subject to errors in technical data and prior sale.

Condition: used, Johansson Type: Johansson Cordimatic 7000 Coordinate Measuring Machine The coordinate measuring machine for measuring large workpieces. Johansson Cordimatic 7000 measuring machine with Renishaw retrofit (control, rotary/swivel probe & probe changer library) Johansson Cordimatic 7000 measuring machine with Renishaw rotary/swivel head PH10T Measuring range: 28" x 17" x 13.5" Granite table size: 42" x 28" x 8" Kodpfx Anjzd N Shjusnc Equipped with: Computer Metrologic 1 joystick pendant control Metrologic software manuals Joystick and control from RENISHAW SPA2 servo power amplifier UCC2 controller Condition: used Scope of delivery: (See image) (Changes and errors in technical data and information are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Kedozdz S Tepfx Anusnc Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: ready for operation (used), Etalon Polo Horizontal Length Measuring Device Measuring Bench Gauge External measuring range: 0 ÷ 100 mm Internal measuring range: 5 ÷ 100 mm Measuring span: 50 mm Output device resolution: 0.001 | 0.0001 | 0.00002 mm Error limit 0.5 µm Measuring force, adjustable: 0 ÷ 4 N Support table height adjustment: 18 mm Kodpfx Aowcxgzonujnc Length: 500 mm Width: 170 mm Height: 170 mm Weight: 41 kg Accessories: Mounting plate with H-shaped recess Mounting block for floating measuring table Control system for lever dial indicators Floating measuring table with tip holder 1 pair of measuring inserts 1 micrometer spindle for testing dial indicators and lever dial indicators Application examples: - Checking plug gauges with a control system - Checking plug gauges and test pins with a floating precision measuring table - Measuring test pins - Checking ring gauges with a mounting system - Checking thread plug gauges with a control system. - Testing dial indicators You are welcome to come by for a viewing. We would be happy to arrange a cost-effective shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: used, Measuring instruments, calipers, and dial indicators are available for sale. These are used but in good to very good condition. * Calipers with measuring ranges up to 300 mm, * Dial indicators up to 250 mm (including models with round, triangular, and pentagonal tips), Kjdpfx Aoz Hxxyonusnc * Thread flank measuring screws up to 250 mm, * 3-point flank micrometers (6-7 of them with dial gauges).

Condition: ready for operation (used), Helios Preisser length measuring machine, measuring machine, measuring device with camera system Length x width: 1350mm x 270mm Accuracy class: Grade 0 Flatness: Actual - 5.9 µ; target - 10 µ Weight: 109 kg PC, printer, camera system, keyboard, mouse. Digital display has been checked. You are welcome to visit us for an inspection. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Kjdeiwxwhepfx Anusnc Deviations in technical data and errors in the description of the item may occur and are subject to change.

Condition: used, For sale is a modular test and measurement system from National Instruments, based on the PXI Express platform. The system was originally purchased in 2016 and subsequently expanded in 2018. The device can be used for test automation, multi-channel data acquisition, quality control, GigE camera support, and communication with industrial devices. Current configuration: National Instruments PXIe-1085 – 18-slot PXI Express 3U chassis with a system throughput of up to 24 GB/s, National Instruments PXIe-8880 – embedded PXI Express controller with a 64-bit Windows 7 operating system, 2 × 8 GB RAM expansion for the PXIe-8880 controller, 6 × National Instruments PXIe-8234 – dual-port GigE Vision modules designed for image acquisition from industrial cameras, National Instruments PXIe-4499 – 16-channel, 24-bit module for sound and vibration measurements, 204.8 kS/s, with IEPE and TEDS support, a complete set of two InfiniBand–BNC cables for the PXIe-4499 module, National Instruments PXIe-4357 – 20-channel, 24-bit temperature measurement module for RTD sensors, National Instruments TB-4357 – terminal block for the PXIe-4357, National Instruments HDD-8261 – 6-disk, high-speed SSD data storage module with a total capacity of 2.9 TB according to the original configuration, National Instruments PXIe-7846R – reconfigurable I/O module with a Kintex-7 160T FPGA, equipped with 8 analog inputs, 8 analog outputs, and 48 digital I/O lines, Knedpfx Anezv Idtjuec National Instruments SCB-68A – shielded terminal block, shielded 68-pin terminal block for R Series DIO and HSDIO devices, 2 m SHC68-68-RMIO cable, shielded 2 m R Series High Speed Digital Cable, power cable. Additionally added: NI PXI-6224 M Series Multifunction DAQ – 32 analog inputs and 48 digital I/O lines 12 × NI 8234 Dual Gigabit Ethernet Controller for Windows – a total of 24 Gigabit Ethernet ports NI PXI-8433/2, 2000 V Isolated RS422/485 – isolated, dual-port RS422/RS485 interface Possible applications: - Multi-camera GigE Vision systems - Automated quality control - Testing of electronics and components - Acquisition of analog and digital signals - Communication via Gigabit Ethernet, RS422, and RS485 - Research and development workstations - Automation of production tests The devices were purchased as part of a single, complete National Instruments system. Original purchase documentation is available for review. The system was used in research and development activities related to electronics, vision systems, metrology, and automation. Technical and visual condition as shown in the photos. Detailed catalog numbers and serial numbers of individual devices can be provided upon request. Sale of the complete system is preferred. Sale of selected modules is also possible after prior arrangement.

Condition: used, Year of construction: 1999, functionality: unexamined, Good day, For sale is a sputtering system for glass manufactured by Beijing Instruments Factory / JDS, model JDS800. The system utilizes the Physical Vapor Deposition (PVD) process to horizontally deposit coatings onto substrates. The unit measures approximately 5 meters in length and 1 meter in width. The substrate size is about 400 x 420 mm. Please refer to the photos for detailed dimensions. Kodsy D Uphjpfx Anusnc The system is complete with various power supplies, fore-vacuum pumps, and a turbomolecular pump. Technical drawings are available, along with several folders containing technical documentation. The machine was disconnected from the mains in working condition. Dismantling and transport are the responsibility of the buyer.

Condition: new, Year of construction: 2026, Length measuring device ASB Ksdozr U Nbepfx Anuenc ----- - Freely selectable setpoint - Switchover from absolute to relative measurement - Easy readability thanks to digital display - Automatic display shut-off - Low installation effort Technical data Length measuring device ASB Measuring range: ASB: 1,000 mm - 6,000 mm Accuracy: +/- 0.1 mm over 3,000 mm Resolution: ± 0.01 mm

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Knsdpfx Anoq Ulh Hsujc Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Condition: used, Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production -Length measuring device: used for slats/blinds production -Rotary encoder: Heidenhain ROD 426.003 - 1000 -Pneumatic components: Manufacturer Festo Ksdpfx Ajgal A Denuonc -Dimensions: 350/400/H1130 mm -Weight: 80 kg

Condition: used, Oxford Instruments   Oxford Instruments X-Strata 960 X-ray Fluorescence Analyzer – for spare parts / defective   Item Description:   For sale is a used X-ray Fluorescence Analyzer, type Oxford Instruments X-Strata 960. The unit comes from a laboratory decommissioning and is offered exclusively as a source of spare parts or for repair purposes. No functional testing has been performed – therefore, the unit is considered defective for the purposes of this sale.   Technical Data – Oxford Instruments X-Strata 960 (non-binding)   Feature Description Model X-Strata 960 Manufacturer Oxford Instruments Analysis Method X-ray Fluorescence Analysis (XRF) Kedpfx Anezdzifeuonc Application Areas Coating thickness measurement, material analysis, precious metal testing Measurement Geometry Top- or bottom-irradiating, depending on configuration Radiation Source X-ray tube (e.g., rhodium anode), 50–100 W power Detector Proportional counter or silicon drift detector (SDD), depending on version Measurement Range Coating thickness approx. 0.005 – 50 µm (material dependent) Spot Size approx. 15 μm – 1 mm (depending on collimator) Z-Axis Motorized, adjustable up to approx. 230 mm measurement height Sample Chamber (W × D × H) approx. 580 × 510 × 230 mm Sample Table Manual or motorized (200 × 200 mm or larger, depending on equipment) Focusing System Optical / laser focus, partially automatic Operating System Integrated industrial PC with Windows-based evaluation software Voltage Supply 220–240 V / 50–60 Hz / approx. 500–800 W Unit Weight approx. 150–200 kg (depending on version)   Condition: used / defective / for spare parts   Scope of Delivery: as shown in the images – without accessories or software   Important Notes:   Sold expressly as a defective unit without any warranty of functionality. The item is offered as a source of spare parts or for hobbyists. No warranty on function, completeness or technical parameters.   Commercial sale with exclusion of any liability for defects, in accordance with § 447 BGB (distance selling contract).   Scope of Delivery:   Oxford Instruments X-Strata 960 All components visible in the images Other parts, accessories or documentation are not included, unless explicitly stated.   Shipping & Pickup:   Pickup possible and preferred in Borken Shipping possible upon agreement.   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Morphologi Type: Morphologi G3SE Image analysis device for determining particle sizes Morphologi G3SE Advanced particle characterization The Morphologi G3 system is an advanced and easy-to-use instrument for characterizing particles by measuring particle size and shape in the size range from 0.5 micrometers to several millimeters. The necessary flexibility for applications in research and development, as well as the reliability for user-independent results and validation mechanisms for automated quality control, are combined in a single instrument. This technology is often used in conjunction with particle size determination using laser diffraction to gain a deeper understanding of product or process behavior. Model: Morphologi G3SE Manufacturer: Malvern Objectives: 2.5x; 5x; 10x; 20x; 50x Condition: used Scope of delivery: (See image) Kjdpfx Aozdyyponusnc (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Tool measuring device Manufacturer: Mitutoyo Type: Quickset R Kjdpfjddtuyjx Anujnc

Condition: used, Optacom VC-10 Universal Measuring System Surface Roughness Tester / Contour Measuring Device Device is sold without PC and software (hardware only). Resolution in X and Z axes: 0.002 µm Ksdpfx Ajybbd Senusnc Resolution at the probe tip: 0.003 µm VC-10 measuring range horizontal/vertical (X-axis/Z-axis): 225 mm Measuring system: optical, incremental, and non-contact in all axes (X, Z, T) Accuracy: +/- (0.5 + L/100) µm Maximum measuring force: 10 - 150 mN Measuring speed: 0.1 – 2 mm/sec (automatically optimized) Probe tip radius: 0.002 – 1 mm Measurable slopes: 78° upwards; 87° downwards VC-10 dimensions (W x D x H): 950 x 380 x 725 mm VC-10 weight (approx.): 150 kg Description has been adopted as provided. You are welcome to arrange an on-site inspection. Upon request, we can organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Mahr Perthen Perthometer S4P roughness measuring instrument Knjdpoihfmusfx Anuoc 1 x Mahr Perthen Perthometer S4P roughness measuring instrument 1 x Mahr Perthen 6 86 20 63 1 x Mahr Perthen 42 50 01 50, up to 160 mm Ø More roughness measuring instruments in other sizes – new and used – can be found here.

Condition: excellent (used), LENGTH STOP AND MEASURING SYSTEM Eisele 300mm Kjdpeiraqfsfx Anusnc

Condition: new, New HEIDENHAIN length measuring system. The original packaging was opened solely for the purpose of taking photographs. Knsdpfxjzcgybj Anujc Manufacturer: HEIDENHAIN Type: LC 183 Device type: Absolute encapsulated length measuring system Measuring length: 540 mm Accuracy class: 5.0 µm Measuring method: Absolute Data interface: EnDat 02 Measuring step: 10 nm Pitch: 20 µm Electrical connection: Flange box, 14-pole Mounting type: Integrated mounting strip Available quantity: 4 pieces

Condition: new, HEIDENHAIN length measuring system LC 182 – measuring length 940 mm New HEIDENHAIN length measuring system. The original packaging was only opened for the purpose of taking photographs. Kedpfx Aozcgwmsnujnc Manufacturer: HEIDENHAIN Type: LC 182 Device type: Absolute length measuring system Measuring length: 940 mm Measuring step: 0.001 µm Accuracy class: ±3 µm Mounting type: Clamping Scanning principle: Single-field scanning Protection class: IP53 Supply voltage: 5 V DC ±5 % Output signal: 1 Vss

Condition: new, HEIDENHAIN length measuring system LC 183 – measuring length 540 mm New HEIDENHAIN length measuring system. The original packaging was only opened for taking photographs. Manufacturer: HEIDENHAIN Type: LC 183 Device type: Absolute length measuring system Measuring length: 540 mm Scanning principle: Single-field scanning Kjdszcgxwopfx Anujnc Measuring method: Absolute Output signal: EnDat Mounting type: Clamping Protection class: IP53 Available quantity: 3 pieces

Condition: new, HEIDENHAIN Incremental encapsulated length measuring system LS 187 – ID 526971-09 New HEIDENHAIN length measuring system, unused. The original packaging was opened solely for the purpose of taking photographs. Manufacturer: HEIDENHAIN Type: LS 187 ID Number: 526971-09 Device type: Incremental encapsulated length measuring system Measuring length: 940 mm Accuracy class: ±5.0 µm Pitch period: 20 µm Knsdszcgy Uspfx Anuoc Output signal: 1 Vpp Reference mark: In the center of the measuring length Mounting type: Integrated mounting strip Supply voltage: 5 V ±5 % Electrical connection: Flange housing, 14-pin, separate adapter cable

Condition: new, New HEIDENHAIN length measuring system. The original packaging was opened solely for the purpose of taking photographs. Manufacturer: HEIDENHAIN Type: LS 486C Device type: Incremental, encapsulated length measuring system Knedpfxjzcgz Eo Anuec Measuring length: 1020 mm Measuring method: Incremental Output signal: 1 Vpp Pitch period: 40 µm Scanning principle: Single-field scanning Protection class: IP53 Mounting type: Clamping mounting