Used Hermle U 1000 T for sale (119)

Condition: used, Year of construction: 1997, machine/vehicle number: 11968, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, Used HERMLE universal milling machine model U 630 S, year of manufacture 1997, equipped with Heidenhain TNC 410 control and full safety enclosure. Travels: X = 630 mm, Y = 500 mm, Z = 500 mm Table size: 900 x 528 mm, 7x T-slots 14 mm, spindle taper SK40 DIN 69871 Speeds: Gear stage 1 = 20–1,428.6 rpm, gear stage 2 = 1,428.6–7,000 rpm. Separate coolant tank 120 litres, Heidenhain electronic handwheel HS410, Heidenhain measuring probe TS 220 Hfedpeygwz Rofx Ai Djg Includes mobile tool trolley for SK40 tool holders with approx. 80 tool holders included. The machine is located at our premises in 71334 Waiblingen-Beinstein and can be inspected by appointment.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 27,804 h, functionality: fully functional, machine/vehicle number: 16165, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 915 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Number of axes: 5 Maximum spindle speed: 12,000 rpm Table length: 900 mm Table width: 500 mm Number of T-slots: 8 T-slot spacing: 65 mm T-slot width: 14 mm Maximum workpiece weight on table: 700 kg Maximum workpiece length: 900 mm Maximum workpiece width: 500 mm Maximum workpiece height: 500 mm Number of tools: 16 Maximum tool diameter: 125 mm Diameter with adjacent pockets empty: 180 mm Maximum tool length: 300 mm Maximum tool weight: 6 kg Tool holder: SK 40 Milling head swiveling range: -5° to +95° Rapid traverse: Longitudinal: 30 m/min Cross: 30 m/min Vertical: 20 m/min MACHINE SPECIFICATIONS Hfodpfxeyhnuds Ai Djg Compressed air connection: 6 bar Electrical connection: 50 Hz, 3 x 400 Volt Spindle drive power: 32 kW Total power requirement: 26 kVA Noise level: 78 dB (A) Dimensions & Weight Dimensions (L x W x H): 2,760 x 2,390 x 2,370 mm Machine weight: approx. 7,300 kg Operating Hours Power-on time: 86,672 h Operating time: 34,362 h Spindle run time: 27,804 h EQUIPMENT 3-jaw chuck Ø 200 mm Workpiece probe HEIDENHAIN TS 640 Rotary table 4th axis HOFMANN type RW/NC-160 Rinsing gun RS 232 interface Ethernet interface Electrical cabinet air conditioning unit

Condition: ready for operation (used), Year of construction: 2003, Make: HERMLE Type of machine: C 800 U Year of manufacture: 2003 Control system: Siemens 840D Machine's weight: 9.000,- Tool holder: SK40 x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Speed range: 16.000 min-1 Hfedpfxjtmtxms Ai Djg Number of tools in the magazine: 80 Pl.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 48,702 h, functionality: fully functional, machine/vehicle number: 16261, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Siemens Sinumerik 840 D pl , spindle speed (max.): 28,000 rpm, TECHNICAL DETAILS Travel Paths X-axis travel: 650 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Main Spindle Spindle speed range: 20 – 28,000 rpm Spindle drive power: 23 / 18 kW Max. torque: 79 Nm Tool taper: HSK-A63 NC Rotary Swivel Table Clamping surface: Ø 630 mm Swivel range A: +30° / -115° Rotatable C: 360° Max. table load: 500 kg Max. workpiece dimensions: Ø 630 x 313 mm Table rotation speed A: 25 / C: 65 rpm Tool Changer Number of tool stations: 117 Max. tool diameter: 90 mm Max. tool length: 300 mm Feed Rates Hjdpfexbz A Hjx Ai Dofg Rapid traverse (X / Y / Z): 60 m/min Acceleration: 10 m/s² Feed force: 8.5 kN MACHINE DETAILS Control: Siemens Sinumerik 840 D pl Space Requirement & Weight Required space approx.: 8.5 x 5.5 x 3.0 m Machine weight approx.: 10,500 kg Total power requirement: 43 kVA Operating hours: 48,702 h EQUIPMENT - Documentation - High-pressure cooling - Coolant system - Internal coolant supply: 80 bar / 1,300 l - Electronic handwheel - Fully enclosed cabin - FASTEMS pallet pool / 15 positions - Chip conveyor - Paper band filter - Renishaw probe - Tool breakage monitoring Note: Transport lifting gear must be provided by the buyer. The pallet system cannot be observed under power. The Fastems controller is defective.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,396 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain 530, number of axes: 3, In 2022, the tool magazine door was replaced. In 2023, the SIMODRIVE 611/18A servo converter was replaced! TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 450 mm Travel Z-axis: 450 mm Tool holder: SK 40 Number of axes: 3 MACHINE DETAILS Hsdpfjx Up E Esx Ai Dofg Control: Heidenhain 530 Operating hours Spindle hours: 18,396 Machine hours: 56,040

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available! Hsdpfx Aoygx Hnji Djfg

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 460, rotational speed (max.): 15,000 rpm, spindle nose: HSK 63A, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Used HERMLE C800U high-speed 5-axis continuous vertical machining center; this is a medium-sized CNC machine equipped with a gantry granite structure, weighing 8,200 kg. Axis travels: X 800 mm, Y 500 mm, Z 600 mm, with a 5-axis table featuring a 280 mm diameter platter. Hfodjxryfzopfx Ai Dog Year of manufacture: 2000, fitted with HEIDENHAIN TNC 430, HSK 63A spindle at 15,000 rpm (max 19 kW) cooled by a dedicated chiller, 30-position pick-up type tool changer, and remote electronic handwheel. The equipment is completed by a KNOLL chip conveyor, high-pressure through-spindle coolant, and a RENISHAW MP10 wireless 3D workpiece probe.

Condition: used, Year of construction: 1994, x-travel 850 mm y-travel 630 mm z-travel 550 mm table surface area 1200 x 550 mm spindle taper SK 40 spindle turning speed range 20 - 4200 U/min spindle drive 11,5 kW quill stroke 95 mm feeds longditudinal/cross/vertical 1 - 10.000 mm/min rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min control HEIDENHAIN, TNC 426 total power requirement 21 kW weight of the machine ca. 6 t Accessories: NC-dividing unit (= 4th axis) with tailstock, make HOFMANN, model RWNC-160; vertical head with hydr. tool clamping and quill retraction, Hjdpfxjy Nnxae Ai Dsfg solid table, electron. handwheel, coolant

Condition: used, Year of construction: 1989, x-travel 600 mm y-travel 450 mm z-travel 400 mm table-size 850 x 440 mm spindle taper SK 40 Hsdpfx Asy Nnw Nei Defg control HEIDENHAIN TNC 355 ATC 32 Pos spindle turning speed range 20 - 4000 U/min spindle drive 5,9 kW quill stroke 80 mm feeds longditudinal/cross/vertical 1 - 2000 mm/min power feed x/y/z 7200 N rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min total power requirement 12 kW weight of the machine ca. 3 t Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant

Condition: good (used), Year of construction: 2015, functionality: fully functional, Description: Hjdpfoy Rgfnsx Ai Djfg The machine is in good technical condition, with the possibility of testing by prior agreement. Heidenhain iTNC 530 control. Dimensions in mm. Spindle: 15,000 rpm, SK40, 38 tool positions. Tilting rotary NC table Ø 440 mm. Worm drive for C-axis. Single-sided drive for A-axis. T-slots for the rotary table Ø 440 mm. Standard coolant device. Scraper conveyor. High-pressure coolant (IKZ). Blowing device. Through-spindle air blast. Manually operated cabin doors. Manually operated cabin top. Polycarbonate safety glass. Electronic handwheel, Heidenhain operating module. Renishaw or BLUM measuring probe. The price of a new machine was approximately 270,000 EUR. We have a complete specification of the supplied components and options for this machine – can be sent upon request.

Condition: used, Internal item no.: 26004 Universal Milling Machine Hermle UWF 800 + 3-axis digital readout + Hydraulic machine vice Röhm + Rotary, swivel, tilting table Hfodsy Hittepfx Ai Dog + Steady rest + Machine documentation + Machine feet Travel paths: X 500 / Y 300 / Z 400mm Table: 600 x 320mm Spindle mount: SK40 Power: 3 kW Dimensions (LxWxH): 140 x 190 x 170cm Weight approx. 1,000 kg The machine comes from a training facility and is in well-maintained condition. You are welcome to inspect the machine under power on more than 500m² of heated storage area.

Condition: good (used), Year of construction: 2007, Year of manufacture: 2007 Spindle hours approx. 14,000 (replaced 11/2017) Drive operating hours approx. 68,500 Traverse paths: 850x700x500 mm Rapid traverse: 45 m/min Speed: 18,000 rpm HSK 63 Tool changer with 38 stations Laser tool measurement/breakage monitoring Hjdpfxey Er Ukj Ai Dsfg NC tilting rotary table D=420 mm Control: Siemens 840D Internal coolant supply 80 bar Paper band filter Chip conveyor Electronic handwheel module Oil mist extraction Chip flushing gun Thermal compensation Heidenhain probing system

Condition: good (used), Year of construction: 1995, Control: HEIDENHAIN TNC 415 B Travel: X= 600, Y= 400, Z= 420 mm Speed range: 20 – 4000 rpm Gear stages: 3 Spindle taper: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (manual/programmed) Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Clamping area: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electronic handwheel, various tools (without cabinet) Hedpfew Uin Sjx Ai Dsfg

Condition: used, Year of construction: 1996, x-travel 850 mm y-travel 630 mm z-travel 500 mm Hfedpfx Aey Dh U Dei Dsg rapid traverse 10 m/min table dimensions 1.200 x 550 mm spindle tunring speed 20 - 4.200 U/min spindle drive 7 kW tool taper SK 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control system: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Spindle speed range: 20 - 6,300 rpm Tool holder: SK 40 M & H 3D probe (for workpiece touch-off) Vertical-horizontal milling device Quill Hjdpfjv Rxa Sex Ai Dsfg Coolant system Angle table: 900 x 458 Weight: 4,000 kg Machine dimensions (LxWxH) approx.: 3,900 x 2,000 x 2,000 mm

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Travels X/Y/Z: 600 x 450 x 500 mm Swivel table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Hfjdpfx Aiev Rpr Se Dog Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm

Condition: good (used), Year of construction: 1983, functionality: fully functional, Universal Production and Tool Milling Machine Type: UWF 700 PH Machine No.: 5670 Serial No.: 034650 Year of manufacture:1983 Control system: Positioning and path control incl. display HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working area X-axis (longitudinal) manual/automatic: 410/390 mm Hfsdpsx Ry Atjfx Ai Deg Y-axis (transverse) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill travel vertical: 63 mm Clamping surface, vertical: 830 x 224 mm Number of T-slots: 4 Angular table clamping surface: 700 x 285 mm 6 T-slots: 12 H8/45 mm Workpiece weight: 200 kg Distance table – spindle nose (vertical): 0 – 515 mm Distance table – spindle center (horizontal): 30 – 565 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Speed progression (geometric steps): 1.4 Tool holder (DIN 2079): ISO 40 Feed range (all axes): 2 – 1500 mm/min Rapid traverse (all axes): 1.5 m/min Operating voltage: 380 V/50 Hz Machine dimensions: 1.2 x 1.6 x 1.7 m Space required: 2.1 x 2.1 m Machine weight: 1100 kg EQUIPMENT / ACCESSORIES  Hand operation and CNC program control  Vertical and horizontal machining  Swiveling vertical milling head  Adjustable-angle vertical milling head  Various tool holders  Manual quill feed (vertical)  Angular table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in work area  Mounting elements  Machine lamp  Documentation Condition: Control system overhauled, workshop tested

Condition: excellent (used), functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 550 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, HERMLE UWF 1001 CNC milling machine With CNC control, HEIDENHAIN / Type: TNC 155 Hfjdpfx Aijy I Szpj Deg Measuring probe / Coolant system / Chip conveyor Enclosure / Cabin / Control cabinet: 1260 x 500 x 1700 mm Travel paths: 700 x 550 x 550 mm / Clamping table area: 1000 x 490 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 35,044 h, spindle speed (max.): 10,000 rpm, total height: 3,000 mm, total width: 2,500 mm, overall weight: 11,000 kg, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle motor power: 16,800 W, product length (max.): 2,500 mm, table load: 500 kg, tool weight: 8,000 g, number of slots in tool magazine: 82, number of axes: 5, This 5-axis HERMLE C40U Dynamic universal machining centre was manufactured in 2011. It features a travel of 850 mm in the X-axis, 700 mm in the Y-axis, and 500 mm in the Z-axis. The machine has a maximum spindle speed of 10,000 rpm and a magazine capacity of 38 positions plus 43 additional. If you are looking to get high-quality machining capabilities, consider the HERMLE C40U Dynamic machine we have for sale. Contact us for further details. • Utilization: 70% • Shifts: 2 • Operating hours: 35,044.4 h • Rotary table diameter: 420 mm • Clamping surface diameter: 420 mm • Spindle: • Power at 40%: 1500 rpm = 25 / 16.8 kW; 10,000 rpm = 7 kW • Torque at 40%: 1500 rpm = 159 / 107 Nm; 10,000 rpm = 6.7 Nm • Tooling/magazine: • Number of revolvers/magazines: 2 • Magazine capacity: 38 positions • Additional magazine + 43 positions • Maximum tool length: 300 mm • Maximum tool diameter: 140 mm • Knoll Cooling • Renishaw OMP 40 probe • IKZ (inner cooling through spindle) • Laser beam monitoring • Chip conveyor • SK 40 • Operating voltage 400 V/3~ • Mains frequency 50 Hz • Control voltage 24 V- • Total nominal current 60 A • Total performance 41 kVA Hfjdpfsy Al Ufjx Ai Deg Additional equipment • OPTIONAL for an additional charge: Tooling package available: approx. 530 tools • OPTIONAL for an additional charge: Zero-Point Clamping SystemMachine was maintained in 2025 by HERMLE officialIn August 2025, the spindle head was replaced and the geometry was checked and adjusted again by HERMLE official Technical Specification Taper Size SK 40

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Hermle UWF 802M with HS 401 Path Control Super CONDITION CE Compliant!! Technical Data: >> Year of manufacture: approx. 1995 Machine No. 10064 >> Fixed angle table >> Spindle speed: 17 to 3,550 rpm >> Infinitely variable feed on 3 axes from 0 to 1,600 mm/min >> Drive power: 6 kW >> Travel X/Y/Z: 500/430/400 mm >> Vertical and horizontal quill - SK40 >> Hydraulic drawbar system >> Weight approx. 1,800 kg >> Dimensions: Length 1.8 m, Width 1.8 m, Height 1.9 m Accessories and Equipment: >> HS 401 path control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare part diagrams, operation manual for the control system, and programming examples About the machine: Hfjdpfx Aioyzzb Ee Dsg For sale is a Hermle UWF 802M tool milling machine with HS401 path control and CE compliance. This universal milling machine is in very good condition. It features a very user-friendly path control system. Length and radius compensation can be programmed without requiring extensive CNC knowledge. Of course, the Hermle can also be operated manually without the control. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple by tilting the vertical head. The guides are regularly lubricated by the central lubrication system. The Hermle has been mechanically and electrically tested by us. Take the opportunity to view and test the Hermle under power on site.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Z-way 500 mm Main spindle: Speed 16,000 rpm Hedjinh Rqspfx Ai Dsfg Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Swing round table: Round table diameter 800 mm Swivel range A: -15 / + 97° rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Total power requirement 31 kVA Machine weight 15 tons Space requirements approx. 6.0 x 5.0 x 3.6 m other equipment - Documentation - Chip conveyors - electronic heat compensation Y- + Z-axis

Condition: used, Year of construction: 2005, 5-Axis Simultaneous Hermle U740 Hjdpfsyxh Sfex Ai Djfg Travel: X-915 mm, Y-500 mm, Z-500 mm Control: Heidenhain iTNC530 Spindle speed: 18.000 U/min Spindle mount: SK40 tool magazine: 16 seats B-axis: hydraulic clamping –5°/+95° NC rotary table: 630 mm max. table load: 500 kg probe: Heidenhain electric handwheel: Heidenhain table size: 1000 mm x 560 mm Spänewanne: .

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530i, rotational speed (max.): 18,000 rpm, operating hours of spindle: 2,025 h, Equipment: chip conveyor, 2007 5-axis continuous machining center with Heidenhain 530 control and tool cabinet (189) Mod ZM157 + ATC 30 tools on the machine. Machine in excellent condition and always serviced by Hermle-specialized technicians. New spindle in 2025. HSK A63 with 18,000 rpm with internal tool cooling of 80 bar and chip extractor. Hfsdpfx Aoh Elngsi Dsg

Condition: ready for operation (used), machine/vehicle number: 5722, table mounting size: 190 x 710 mm table movement x: 390/360 mm Hjdpfx Aieflrg Tj Defg table movement y: 150 mm table movement z: 280 mm spindle taper: SK 40 spindle turning speed range: 100 - 3100 rpm carriages longitudinal: 0 - 600 mm/min electrical connection: 380 V, ca. 1,5 kW space needed: 1400 x 1200 x 1500 mm weight: ca. 680 kg

Condition: not inspected (used), Tool Milling Machine HERMLE UWF 802 M - Travel Control HS 401 - Travel X/Y/Z: 500x430x400 mm Hedpey Ddz Hefx Ai Djfg - Spindle speed range: 18–3550 rpm - Stepless feed on all three axes - Rapid traverse 0–1.6 m/min on all three axes - Vertical and horizontal milling device - Tool holder ISO 40 - Hydraulic tool clamping - Central lubrication - Drive power: 6 kW - Work lamp - Chip tray - Documentation Dimensions (LxWxH): 1.9x1.8x1.9 m / Weight: 1900 kg Errors and omissions excepted.